Database Users

Bad sound quality

There was a thread here about that the voice from the earpiece is distorted. I experienced to have a similar problem. From the first day the sound was excellent but in 2 months it changed to distorted and then become very-very weak. At the same time the sound was good if a loudspeaker is on or if the hands-free is connected. Thus, I supposed that the contact becomes bad. To fix it, I disassembled the device. The *.pdf-file how to do that is included (33 megs). When the contacts were formed so they touch firmly the corresponding places on the printed board and the device was assembled, I heard nice voice from the earpiece.
So, in some cases the problem with the sound may be due to weak contacts. I suppose the contacts may become poor because the material for the outputs on the earpiece is not so elastic plus influence of vibration from the vibromotor plus influence of humidity.
Backup the system before disassembly because during this the backup battery may discharge completely!

Sorry wasn't logged on...

Thanks a lot I got this problem long time ago but I don't know how to disassemble it so I always try to shake it to fix ......

Great ! Very useful
Thanks

thanks for the guide..... very useful

Where can I find the 33meg pdf? I need to disassemble the device too...
regards

That is what I thought th first time I opened my MDA Compact! Believe me I am the very first one I did when the device first came out! After lots of research let me tell you this:
IT IS NOT THE CONTACTS! IT IS THE SPEAKER! The membrane is of low quality when you open the device and "fixing" the contacts it will only make it to work for a few phone calls up to a couple of days at most! The speaker is burnt by the high amount of volume the motherboard of JAM gives to the speaker! If you want to solve your problem then you ll have to find a Nokia Center and buy a speaker for a Nokia 6610! Nokia 6610 and HTC Magician have exactly the same speaker! The only thing you have to do is to change nokia's black cloth ribbon on the top of the speaker with HTC's black rubber get it into your magician and there you are! You have a perfect sound again! My only advise is to use the call volume just a click less than the maximum volume so you won't blow away your new speaker!
I dissasembled and reassembled my MDA compact more than 11 times trying fixing the contacts with no permanent result! After replacing the speaker with a Nokias's 6610 speaker everything seems to work like a dream for at least a month now! :wink:
Its much more easier to get Nokia's spare parts than HTC's! The speaker cost me 18euros!

any chances you could post us nice pictures of these manipulations ?

I would love to do that but please I don't think that my magician could survive one more disassembly! :twisted: In case of replacing a friend's speaker next week who has the same problem I will make sure I get those pics! Magician is extremely easy to be taken apart! The only hard parts in the removing process are the upper backplate which has to be removed very carefully in order to be fitted back in its place afterwards and the front faceplate where you will need something very thin like a thin knife or even better a razor to take it away from the black plastic on the sides! :wink:

where is the link to the pdf
Hey guys,
I cannot see the link to the pdf. I need to disassemble my Jam too.
Thanx, Martido

Sorry, I found it. Just woke up....

Oh, thank god, I'm not the only one, with this problem. But first i have two questions? Will i loose my warrenty when i open the device? Can O² discover that i opened it?
Did this contact fix solve the problem entirely, or not? Because katsj says the problem is the speaker!
Thank you in advance, such a great community!
Bauer
Edit:
I read the PDF File and i have to say .. this is simlply impossible! You can cause so much damage .... i dont know where to begin. One small mistake and you can't forget your PDA. I think this is highly to dangerous. Is there no easier way to solve the problem ... some ideas??
Or do the pictures lie and it isnt that complicated??
Bauer

My sound disappears during call...
Strange, during a call after a few minutes my sound disappears. I can hear the other caller, the other calleer can't hear me anymore...
But now I found a strange solution: when I pull up the volume button n the left a few times (it was already at maximum!) my sound is back!
Has anyone the same experience or a better solution?

I think when you pull up the volume there is this small tone and you hear this tone from the loudspeaker.
After you hear the tone, you cant here anything again, right?
I'm driving really crazy, i loved this XDA Mini since this prob occured and i want to find a solution as soon as possible ! I really dont know what to do
When i push against sd-card slot from inside, i hear everything .. again, so this is just a really small prob ..
I hope sb. find a solution quickly otherwise ... i dont know
Bauer

JackBauer said:
I think when you pull up the volume there is this small tone and you hear this tone from the loudspeaker.
After you hear the tone, you cant here anything again, right?
I'm driving really crazy, i loved this XDA Mini since this prob occured and i want to find a solution as soon as possible ! I really dont know what to do
When i push against sd-card slot from inside, i hear everything .. again, so this is just a really small prob ..
I hope sb. find a solution quickly otherwise ... i dont know
Bauer
Click to expand...
Click to collapse
I think it's a contact problem, so maybe the problem isn't that small... I don't want to open my device.
I don't think it has anything to do with the ROM or with the software.
(I wish it would, then there would be a solution in the end)

I had this problem too and found a fix:
I assume that while you are making a call, there is no audio from the earpiece. While on the call, adjust the volume up or down with the volume slider button. if you hear faint beeps and faint audio right after the beeps, your earpiece is working but there is a software glitch caused by the headphone jack.
Reset your device. Make a call (i.e. to your voicemail) and make sure there is audio incoming. Connect the (wired) headset. Disconnect the headset and you shoud now hear audio from the earpiece. You may have to reconnect/disconnect the headset a few times.

thanks
thanks for the pdf. ill check it right away!

U ROCK
THX GUYS>>>U ROCK...........I was soo worried.....
thx again..

Thanx dudes for the nokiaspeaker tip!
Just received my on ebay ordered nokia speaker and within a few minutes I fixed mine magician thanx to the pdf & already gainted knowledge on this page!
I bought this phone a year ago for a very nice price because of the damaged speaker and now at last I repeared it just for €3,- (instead of sending it to Orange risking over €100; I`m Dutch ya know )

hi guys...pulling this one out from the past....my magician has all the symptoms above, but with no luck, the replacement speaker did not do the trick...any other ideas/details/downloads....anything to get the audio back???\
BTW, i can hear glitches of sound if i play with the volume tab. That is to say, if i push it up, i hear the tone "ding" and i can hear the voice on the other end for a split second! So i must be close, no????

Automatic pickup does not work

I have an 02 XDA Exec & I want to enable it to answer my incoming calls automatically without me pressing any buttons on the handset or my bluetooth Sony Ericsson HBH-610 headset
Infact I have 2 of these now, one of them was replaced because I found myself having to align the screen 5+ times a day and they both do not auto answer
Would someone be kind enough to suggest anything that I may have missed
I've done the following so far:
1. Start
2. Phone
3. Menu
4. Options
5. More
6. Ticked the box to "Answer incoming calls without pressing Talk after 1 rings.
I then pressed ok it carried on ringing until the answerphone kicked in
I did the same procedure again and tried a soft reset with the same results
I've also tried it with & without the bluetooth headset paired to the device
I can't see anything else that I can try (
Regards
James

James you are not alone, I am searching for an answer to the same question.
Its on this board somewhere and I will find it :?

I have been looking for a way to get my SPV M5000 to ring for longer, when it rings I have to run to it and open it as fast as I can before it cuts off to answer machine.

If it's like any other phone I've had with auto-answer, you'll find that the Universal needs to be in a proper car kit for that function to actually do anything, whether you've switched it on or not.

Thats a shame as it is bluetoothed to the Autocom system on my motorbike,
With the phone inside my leathers I know that a call is comeing in as it cuts the music and rings but no answer :-(
I am sure that we will find an answer soon

I am also looing for this feature.
I want to call home and listen if my dogs are barking.
please help!

squilla said:
I have been looking for a way to get my SPV M5000 to ring for longer, when it rings I have to run to it and open it as fast as I can before it cuts off to answer machine.
Click to expand...
Click to collapse
Call your service provider. They can increase the number of rings from their side, not from yours. That's what I did.

you can extend the phone rings by going into the phone settings, services, select call forwarding, get settings, it will take a second or two, opens a dialogue box where you can change from 15 seconds to 30 seconds.
never missed a call since.

simon_darley said:
you can extend the phone rings by going into the phone settings, services, select call forwarding, get settings, it will take a second or two, opens a dialogue box where you can change from 15 seconds to 30 seconds.
never missed a call since.
Click to expand...
Click to collapse
That is not what I am looking for.
I want the phone to answer the call after a certain amount of rings.
That way I can leave one of my Mobile phones at home, call home and listen if my dogs are barking...
This feature can be found in the QTEK 9100 at:
Settings --> Phone --> More --> Rings before answer...
But it does not work!
please help!

kikkegek said:
That way I can leave one of my Mobile phones at home, call home and listen if my dogs are barking...
please help!
Click to expand...
Click to collapse
Why not train your dogs to answer the phone? lol
Sorry, but this was too good to make a pass. OK, let's find the solution everyone.

wow, i envy the dogs... they get a uni? 1 for each??? sorry, too good to not ride on this too.
hmm.. I have this problem too. By the time, i open my fone, i missed the call already

i am also looking for the software for HP ipaq 6818 cuz in this set
there is no option for automatic pickup in
1. Start
2. Phone
3. Menu
4. Options
5. More
i am also very confused that this future is not available in hp ipaq 6818

or is there any third party software available for automatic pickup
just like in symbian, advance call manger or car manager (for bluetooth) etc???????

I checked my iPAQ hw6515 from work.
It "does" also have this option under "settings --> phone --> more".
But here it says that it is only available when a wired headset is connected.
I think I am going to try this at home tonight.
I will let you guys now if this works...

the solution was found by me in the manual of my iPAQ 6515.
It says there that a wired headphone needs to be connected for this feature to be activated.
I connected tghe headphones to my phone and now I can listen to my dogs, when I am away from home....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
just wonderfull

Automatic pick up
HI Guys, I ride a bike and the automatic pickup on my V1615 (tytnii) was spot on. WM 6.1 appears to have stripped the facility out. Have tried everything. Is there a way of resurrecting this useful and safe feature? Regards

no sound is coming out of the speaker - QTEK S200 - and a tip how to fix

problem: i discovered that my qtek s200 doesn't ring so i missed many calls. then i did find out that the speaker only work sometimes. i don't wanted to send it back for repair because i need a phone. and i don't want to loose the warranty
for everyone who have the same problem and want to try repairing the qtek s200 speaker quick and easy without loosing warranty:
i removed the case in the back/top where the camera is behind. just open the clips and remove it. there you can see the speeker in the left fixed behind a plasticcover (don't remove it - you will loose warranty).
take something like a janky or cotton and put it on the speaker. look out that the speaker will not be damaged. with only a little bit cotton now my speaker works perfectly.
i find out that many pocketpc's and windows-mobile-phones have problems with the speaker-contacts. i hope this tip can helpsomeone in the future!
regards

Speaker Issue
Thanks for the feedback (a little search would have helped you to find the correct thread where this comment would have suited better instead opening a new thread). But I think the speaker issue is something that should give HTC some serious thinking. It's their fault of bad quality assurance, bad engineering and weak components. It should be their problem to fix the phone for you and not your own problem. If we all head out and fix the stuff that HTC has failed then where will this end ? We would accept all the crap they give us. This is in-acceptable.

Mine broke a second time after going for repair. I eneded up doing what you have done - with a bit of sponge.

you are right. the companys who are doing this small computers really can do some things better. but otherwhise: this little computers are to small and it is a wonder that they are working. and look at all this functions they have. think back in the time of 386 computers. the mobile phones today are very much faster and very much smaller and for this you have to accept some little problems like this contact problem of the speaker. and this 386 computers also didn't work right.
and remember, a 386 computer had problems just if you want to play a wav-file.
my tip just is for this people who don't want to spend to much time with waiting that they get their phones back from repair.
the problem is actual and it don't will help any of the people who have this problem if we talk about the producercompanys who should do the things better. they never will change this problems to save money in the production of the phones.

be careful with using a sponge. if it is to hard, the speakermembrane could get damaged. i done it this way: i tested out how much cotton is needed that the speaker is working right. if i take to much cotton, the speaker gets to quiet or if the pressure between plasticcover and the speaker is to high, the speaker sounds very nasty and can get damage.
regards

Hi Schildzilla!
Thank you very much! I've fixed a problem in 3 minutes =) And it was even a fun. I was searching in the web for the solution and found many people having similar problems. What I really like is that solution does not need any techical skils. I used only stylus and cotton.
Thank you once again!!! =))

Thank youuuu for this extremely helpful tip... My O2 XDA Neo was on vibrate mode for the past 2 months...I thought I would have to spend some cash on geting a new speaker .....But thanks to you guys I was able to fix the problem with a small piece of newspaper Now The speaker works like before ...Many thanks again

How to open the backtop cover
Could you please explain step by step (pictures could be beneficial) how to open backto cover of QTEK S200 I tried pushing the little clips in the middle after replacing the battery but I didn't want to force it.
Is there any trick?
schildzilla said:
problem: i discovered that my qtek s200 doesn't ring so i missed many calls. then i did find out that the speaker only work sometimes. i don't wanted to send it back for repair because i need a phone. and i don't want to loose the warranty
for everyone who have the same problem and want to try repairing the qtek s200 speaker quick and easy without loosing warranty:
i removed the case in the back/top where the camera is behind. just open the clips and remove it. there you can see the speeker in the left fixed behind a plasticcover (don't remove it - you will loose warranty).
take something like a janky or cotton and put it on the speaker. look out that the speaker will not be damaged. with only a little bit cotton now my speaker works perfectly.
i find out that many pocketpc's and windows-mobile-phones have problems with the speaker-contacts. i hope this tip can helpsomeone in the future!
regards
Click to expand...
Click to collapse

Hi Schildzilla, works great in less than 2 minutes, thank you

Thanks
thanks for adding this thread...i fixed the problem in no time!

Tks its help me. You save my money....

I used this method for awhile, but eventually doesn't work anymore.

Same here, I used the above method too, but after a while the problem came back !

Works like a charm! Thank you so much!

thanks man x 1000

this trick works, but after a while, your speaker will not be working. it happened to me. 1st u can just touch the membrane anywhere & there would be sound, then only when the top half is touched there is sound, then no sound at all when everywhere is touched...
waiting for my replacement speaker & hopefully it will last... my speaker lasted for about a year before this happened

no sound from my tytn

hello my phone has no sound at all i tryed all the settings also when i put my sim cad in it will no work but my 2nd sim will

steosavage said:
hello my phone has no sound at all i tryed all the settings also when i put my sim cad in it will no work but my 2nd sim will
Click to expand...
Click to collapse
Just to be clear. Are you saying you get sound with one SIM but not the other!? or you get no sound with either card?
Mike

sorry there is 2 problems whit my phone the first one is the sound i dont get any
the 2nd problen is my sim card i have it in my n80 now and its working fine but when i put it in my tytn its not working thanks for the quick reply

steosavage said:
sorry there is 2 problems whit my phone the first one is the sound i dont get any
the 2nd problen is my sim card i have it in my n80 now and its working fine but when i put it in my tytn its not working thanks for the quick reply
Click to expand...
Click to collapse
Ok well we need to pin down moe detail:
Regarding the sound -
1. Has it suddenly stopped?
2. Is it both front and rear speakers (ie no sound in calls as well as rear speaker using say wm player or alarms etc?
3. Did the phone get a knock / fall?
4. and lets not avoid obvious things like the volume setting on the task bar?
Regarding the SIMs
1. are they both for the same provider service?
2. do any error messages or the like appear when turning on the device?
Mike

1. Has it suddenly stopped? yes
2. Is it both front and rear speakers . sound is good in calls no sound with wm player also no beeps when i press a butten
3. Did the phone get a knock / fall?no not that i no off but it is possible
4. and lets not avoid obvious things like the volume setting on the task bar? i did try all the settings
Regarding the SIMs
1. are they both for the same provider service? yes
2. do any error messages or the like appear when turning on the device?the sim card is missing you can still make emergency calls if your service provider supports it

steosavage said:
1. Has it suddenly stopped? yes
2. Is it both front and rear speakers . sound is good in calls no sound with wm player also no beeps when i press a butten
3. Did the phone get a knock / fall?no not that i no off but it is possible
4. and lets not avoid obvious things like the volume setting on the task bar? i did try all the settings
Regarding the SIMs
1. are they both for the same provider service? yes
2. do any error messages or the like appear when turning on the device?the sim card is missing you can still make emergency calls if your service provider supports it
Click to expand...
Click to collapse
Ok I think it's possible the rear speaker connection as come adrift. This is not uncommon and it just needs pushed back on (normally). To completely rule out a software issue would mean doing a hard reset to be sure.
The choices are:
if you have a warranty then use it - they may require you to hard reset first anyway to confirm there is a problem
if you have no warranty then it's a fairly straight forward fix - remove rear casing 4 screws and push back on the white connector with the red and black wires. (this I can give more info on later if you wish) (I am assuming the speaker is not faulty - this would be rare)
Regarding the SIM: I have no good answer. There are different generations of SIM cards. All I could suggest is getting another one and having the old number swapped to it.
Other people may have alternative suggestions to the SIM issue???
Mike

about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I just did a re-flash with a rom and it worked fine.

fauzman said:
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I just did a re-flash with a rom and it worked fine.
Click to expand...
Click to collapse
Yes, though doing a hard reset should also be sufficient to rule out a software issue. Flashing another ROM would be a rather extreme way of doing the same thing - in effect re-setting and re-installing all the software.
Mike

hello i did a hard reset to confirm that it was not a software issue
i do not have a warranty so i took the 4 screws out and found the white connector and it looked ok but i gave it a push anyway put the phone back and got the same thing so then i tryed takeing the connector out and put it back in and still i get no sound i am tinking it might be speaker is faulty i hope not if it is how would i go about getting a new one
ps thanks for the help that i have got from the forum so far

btw i got the sim card working

steosavage said:
btw i got the sim card working
Click to expand...
Click to collapse
If you can access a multimeter you can test the resistance across the speaker connections (or disconnect the speaker fom that black housing and take it to someone who has). If this possible then you need not be concerned about the reading you get just whether it reads an open circuit when set on a resistance scale.
A very very crude way to test it would be to get a battery 1.5 v max and a couple of wires. Connect the wires to the white block connector and one wire to the battery. Flick the remaining wire across the remaining battery terminal. If you hear a brief click from the speaker then chances are it is ok. Do not hold the wires on for more than a fraction of a second or you burn out the coil.
I do not know a source for the rear speaker but you could contact these people:
http://cnn.cn/shop/advanced_search_result.php?keywords=speaker&image.x=32&image.y=8
or search ebay for spmeone parting out a junked tytn.
Mike

VAriation on "no sound" problem??
My coworker has a new 8525 that stopped playing any sound through the speaker (headset still worked). Through trial and error found that removing battery while 'on' fixes the problem, but not permanently - it returns aftershort period of time. It does not seem likely that a loose connection would act like that (??)

No sound too
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I re-flash with a rom but it didn't help. If i remove battery for some while and plug it the problem dissapear for some while but for some while it came's back and i has no sound. Maby i should change radio rom??

adikos said:
about the sound issue, I had a similar problem, it wouldn't play sounds at all, except maybe on incoming calls.
I re-flash with a rom but it didn't help. If i remove battery for some while and plug it the problem dissapear for some while but for some while it came's back and i has no sound. Maby i should change radio rom??
Click to expand...
Click to collapse
This kind of issue is rarely anything to do with the ROM or Radio. Sound coming and going is normally related to poor connections either at front or rear speakers. Both can become loose, the front speakers spring contacts can get loose if the phone is knocked and the rear speaker push on connector can work loose through a knock or just pushing the stylus in and out.
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike

thanks bro
mikechannon said:
Ok I think it's possible the rear speaker connection as come adrift. This is not uncommon and it just needs pushed back on (normally). To completely rule out a software issue would mean doing a hard reset to be sure.
The choices are:
if you have a warranty then use it - they may require you to hard reset first anyway to confirm there is a problem
if you have no warranty then it's a fairly straight forward fix - remove rear casing 4 screws and push back on the white connector with the red and black wires. (this I can give more info on later if you wish) (I am assuming the speaker is not faulty - this would be rare)
Regarding the SIM: I have no good answer. There are different generations of SIM cards. All I could suggest is getting another one and having the old number swapped to it.
Other people may have alternative suggestions to the SIM issue???
Mike
Click to expand...
Click to collapse
it worked by undoing the 4screws and attachinck the white cable back.
thanks

zackss said:
it worked by undoing the 4screws and attachinck the white cable back.
thanks
Click to expand...
Click to collapse
Well done, and for those that want to see the white connector with the red/black wires:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... and no you don't need to take out the entire circuit board as shown above, all you need do is remove the back casing. (This applies to rear loudspeaker problems only. Problems with sound from the front earpiece requires a much bigger dismantle and this is covered elsewhere).​
Mike​

i have the same problem with the speaker, after to have changed varied rom my phone not work the ring, mp3 player, ecc but i don't know if the problem is sotfware or hardware

skizz3tto said:
i have the same problem with the speaker, after to have changed varied rom my phone not work the ring, mp3 player, ecc but i don't know if the problem is sotfware or hardware
Click to expand...
Click to collapse
Well, you could ask in the threads for that ROM to see if other folks have that problem OR revert to another ROM or take the back casing off and check the connector.
Mike

mikechannon the roms are:
rom_hermes_becham_-diamond_like-_full_edition_wm6.1
Build 21728 Lite V21 Tiger
and mAdkoE HERMES wm6.1
now i check the connecto.
Thank You!!!

6P keeps turning on Do Not Disturb Mode by itself - wth?!

Over the last few weeks I've been having an odd issue. I'm sitting at my desk and I hear the phone vibrate just once - I pick up the phone and there are no notifications, so I just assume I'm crazy, until today, when I hear the the phone do its vibrate thing - I picked the phone up and noticed that the phone was in Do Not Disturb mode (with the ringer volume slider at the 1/2 position, but grayed out), and I have not had it in that mode since last Friday - I've noticed this before, but I just assumed that I'd forgotten to turn the ringer back up, or had accidentally enabled it.
Has anyone else experienced this? Is there a fix? I really cannot afford to lose my job because my phone thinks it's cute to be a troll.
Everything is stock on my device - I've experienced this on the March and now the April update.
EDIT: Photo added
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kozad said:
Over the last few weeks I've been having an odd issue. I'm sitting at my desk and I hear the phone vibrate just once - I pick up the phone and there are no notifications, so I just assume I'm crazy, until today, when I hear the the phone do its vibrate thing - I picked the phone up and noticed that the phone was in Do Not Disturb mode (with the ringer volume slider at the 1/2 position, but grayed out), and I have not had it in that mode since last Friday - I've noticed this before, but I just assumed that I'd forgotten to turn the ringer back up, or had accidentally enabled it.
Has anyone else experienced this? Is there a fix? I really cannot afford to lose my job because my phone thinks it's cute to be a troll.
Everything is stock on my device - I've experienced this on the March and now the April update.
Click to expand...
Click to collapse
Do you have a smart watch?

senectus said:
Do you have a smart watch?
Click to expand...
Click to collapse
No, I do not use one and Android Wear is not installed. =)

Check in Settings - Sound and Notification - Do Not Disturb - Automatic Rules to make sure you do not have any that are active.

It did it again today! =(

CYoung234 said:
Check in Settings - Sound and Notification - Do Not Disturb - Automatic Rules to make sure you do not have any that are active.
Click to expand...
Click to collapse
I checked - they are all off. I turned them on and switched them back off.

You probably just lower the sound to much. If you reduce the sound to the max and click once more it goes to alarm only mode directly.

Yipicayer said:
You probably just lower the sound to much. If you reduce the sound to the max and click once more it goes to alarm only mode directly.
Click to expand...
Click to collapse
As indicated in my first post, the phone is laying on my desk, unmolested, when this happens. I just happen to hear the vibration when the phone enters Do Not Disturb while it's laying on my desk. :silly:

kozad said:
As indicated in my first post, the phone is laying on my desk, unmolested, when this happens. I just happen to hear the vibration when the phone enters Do Not Disturb while it's laying on my desk. :silly:
Click to expand...
Click to collapse
Check in your apps. Do you have two cLock programs? Or is there another program that could be setting the Do Not Disturb function?

CYoung234 said:
Check in your apps. Do you have two cLock programs? Or is there another program that could be setting the Do Not Disturb function?
Click to expand...
Click to collapse
No, I just use the stock clock that ships with Android. I also don't have any system utilities apps installed. The only recent apps I've installed are Blue Mail, Funimation, and Miitomo.
Also, wouldn't an app need permission to access do not disturb?

Maybe a case that's too grabby on the vol button?

I have a similar issue. it's because the volume button gets pressed by accident.
I now manually put my phone in priority mode and allow all calls with vibrate only.
I no longer have the issue.
I wear a Lg Urbane II or Moto 360 so I don't want my phone to ring but it needs to vibrate and make the watch aware.

jawmail said:
Maybe a case that's too grabby on the vol button?
Click to expand...
Click to collapse
It happened today again, at 5:28 PM (just a few minutes ago) - I was playing music over my bluetooth speaker, and the music stopped for one second then resumed - I picked up the phone off my desk and the damn thing was in Do Not Disturb again - if it was the case, it would have turned down my music too, yes? :crying:

Are you on the dev preview? It happens to me too but I assumed it was me hitting the volume buttons. I don't get calls/texts often so it's not a big deal to me.
Sent from my Nexus 6P using Tapatalk

Does this happen when you have events in your calendar?

I am experiencing similar issue
Hi all, i have the same 'Do not disturb' turning on automatically at random. So far as what i have noticed it happen, its always after i am done with a Call over Bluetooth (as what i can remember precisely). To add on, I am wearing Moto 360 Gen 2.

I can confirm it's related to Bluetooth calling. Also notice that answering my phone sometimes puts the call through to my zenwatch 2 instead of the phone. It's a new bug to the latest update.
Sent from my Pixel XL using Tapatalk

I have this problem all the time (about 30-40 times a day) on my Nexus 6P (Android 7.1.2). I have a Zenwatch 1 and use bluetooth headphones all the time. I'd pay a dear price to find a way prevent this.
FYI... the official bug tracker on this.

Getting the same issue. I thought it was related to tasker. But it was not.

Same problem Don not disturb option automatically get ON
Helo
My 6p automatically​ gets On do not disturb option..wen i make a call or receive calls..