i tried to flash a WM6 rom to my phone and now im stuck in 3 color mode!!!!!!!!!! please can anyone help me fix this????
You are in the bootloader mode. Plug-in your phone into your computer, and it should say USB at the bottom. Then flash your original carriers ROM and you will be back to WM5.
Related
lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance
lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance
you're ****ed mate.
problem solved, for those who Stuck in SPL1.xxx SPL 2.xxx after WM2005, please go to http://www.spv-developers.com/forum/showthread.php?p=3576#post3576
for how to get back to WM2003
cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help
If it is realy a brick without any chance of life I need a part of it: the keypad.
Thats really rude.
not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen
All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.
Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.
Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.
hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!
does anyone has a clue of whats going on???
i really need some help here please!!
there are some progs on wiki. Instructions for those stuck on bootscreen.
i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?
Hi I've Instaled Canon Yang hspl..and rom but need to get back to stock my wife doesnt like the mod any help thnx in advance...
Which phone do you have:
The Blue phone is the Wing..
Any other color is the HTC Herald..
For Wing
For Herald
Download the appropriate Orig ROM and then connect your phone to the computer. Next, Go to soft reset the phone but hold the camera button in until you see a Red/Blue/Green/White screen. Look for the letters USB in the lower left hand corner. If you see this, then you can run the .exe file and the flashing will begin. Just follow the directions on screen.
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj