hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!
does anyone has a clue of whats going on???
i really need some help here please!!
there are some progs on wiki. Instructions for those stuck on bootscreen.
i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?
Related
Hi,
i installed that new Rom for my htc p3600, and it worked fine.. some minutes after that the screen went black.. i made a softrestart from that small button with the styles.. the trinity started, but stopped on the screen with : smart mobility... that black screen after the moving HTC logo... and nothing happend...
it is just stuck there..
after many restarts i thought i would re install the rom, but the pc can't see the device any more... the redlighted led is on when i plug the device to the pc, but still nothing happening..
the device is just stuck... doesn't go in to the system,, doesn't accept new instalation from the pc...
and all my work is stopped...
i have backup for my data, but i need to use my device.. please please.. help help help.. very fast..........
thank you..
Boot loader
i think may be it will help you if you get in BootLoader Mode ( by pressing the Camera Button and the Off Button )
then during the device in the boot loader mode try to connect it to your PC and try to flash another rom
GOD help you
What's your bootloader details?
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Is the bootloader stuck in Serial or USB? If Serial, take out battery, let the screen fade away until you barely see the HP logo, put battery back in along with cover, dock the PDA with power, it should change back to USB. Download the rom from HP website, 6945 should work, and flash.
Join the Club
absolutn said:
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Click to expand...
Click to collapse
Here is how to get it out of HP Invent Logo, G.39 .......
soft reset, do not connect yet
press ctrl, alt delete, if on xp, find process wcescomm........., end that process if it is running. plug in data cable for our $600.00 Paperweight, It should now say "USB" instead of "SERIAL" on the hw6925........, now run mtty,
change the port to that w one, you know the one one, if not its the one that does not say comm, or just click on usb to the right, if there is one, next when it opens up the new screen, it should say something like "USB>"
type, " set 14 0 "
now soft reset hw6925,
Should go back to Booting up normally, now for people like me with the "NO GSM AT Startup, we are F"C"ED
someone i change the model number on my hw6925 to a 6915, still no gsm, any of you programmers want to help us out, please do, I will be the first to donate
hey guys this is what is happening to me:
i turn on the universal, the boot screen shows, and before getting to desktop a blank screen is showing and stuck there, but u can still see the flashing green light of the GSM is working, i tried everything, i did hardrest and nothing happens, i changed the rom version and the radio version, still nothing happens too, same problem, please help
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
Hi guys!
While browsing over the internet my phone simple restarted. But this time, it is stucked into the Samsung Omnia 7 logo. I tried removing the battery and nothing. Also, Zune does not recognize it since OS does not start.
I've tried to do hard reboot. Nothing. Also, I tried to enter in download mode, and flash it. The flshing process was perfect and complete, but after all, my phone is still stucked into the start screen. I don't know what else can I do.
Any ideas?
Do you have 8 or 16GB version? Some weird pattern is starting to show up ).
And what ROM did you flash?
I have the 8GB version.... I flashed that one in the guide you guys suggested here in XDA.
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Omnia_7#Accessing_Download_Mode
Should I try any other? Do you have any suggestion?
You should try the latest one. Or the UK unbranded one.
I'll do that.... Do you know where can I find the uk unbranded?
Just did flash with two more ROMs. Nothing.
I don't know what else more I can do. I'm frustrated.
warranty replacement :/.
hi i have an coby kyros mid8048-8 after an rom update my table stucks on start logo menu i cant do anything i try to get to factory reset menu but it donty work pls help tnks.