Database Users

HELP NEEDED REALLY URGENT

Hi all,
I hv a Jasjar with the latest I mate ROM installed and Radio 1.04.10...Today morning I was watching Video in TCPMP Player and when I closed the player the phone got Hanged..then I tried soft resetting it...but to my disappointment it is stuck at I mate Boot Screen which shows all the figs for ROM,Radio and Protocol..doesn't move ahead...
I tried :
-Hard resetting it by pressing zero...still it comes to the same state and doesn't move ahead.
-Tried Hard resetting it via Boot Options...clearing the Reg Hive and Formatting the storage...but the screen becomes white and stays on there.
-Tried updating to O2's latest ROM byputting it in b/l mode...it did got upgraded but then it is stuck again at O2 logo and doesn't move ahead..
-Also tried removing Sim and Memory card...still same result...
Can anyone throw more light on this...PLs it is very URGENT....
Thanks in Advance...

do the "radio only" flash that's on the ftp...
if it works, that's lucky...else go for a replacement!
San

desperated

hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!

does anyone has a clue of whats going on???

i really need some help here please!!

there are some progs on wiki. Instructions for those stuck on bootscreen.

i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?

Killed Wizard! Need Help!!

My wizard freezes at splash screen.
I can start it in boot loader and install a new Rom, i´ve tried Wizard Love and still couldn´t make it work.
For last i tried a original one, WWE from UK Vodafone), but after reset, frezzes in the same place.
Could it be a processor problem? I dont´t think so, because it is working but i just don´t know what else to do...
Please help!!
With the wizard_love rom, i flashed it in my device, it starts up after doing this, but stops at splash screen.

I am a total newb but out of curiosity, how long have you let it sit at the splash screen before calling it?

hello
could you first explain what u did? that caused this, or did it just happened al of the sudden?

It all started in the morning, i try to turn it on and it just stoped in the splash screen like i said.
I just don´t know what else to do.

I had the same problem yesterday. Tried a lot to let my phone work again. It worked after I started the phone pluged to the charger. I hope It works for you.
BTW. in my situation it just started from out of nothing.

I´m Able To Say My Problem Is Solved!!!
Thanks to Drug Store, i solved it!!
CID unlocked it, it was necessary to copy OS to SD card!
Just followed his indications!
Very easy!
Thank´s a lot man!!
IT LIVES!!!

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.

Thx all of ya , problem solved.

sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.

gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.

Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss

Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

Focus 1.3 Stuck at Samsung Logo - Looks like endless reboot loop

My 1.3 focus is stuck in the Samsung logo screen. It lloks like it is in an endless reboot as the logo will go away for a moment then reappear.
I am able to get the phone into Download and Format mode with out issue.
I have also been able to succesfully reflash the original firmware without issue, but the same result none the less.
Any ideas on this?
I had put the mi7 ROM on which worked fine. This morning phone was stuck on the logo. I reflashed the mi7 without issue as well before trying the original Samsung ROM

Hi Guys
i have this same problem with my focus its also ver 1.3
i had an error on the mango update (usb cable bad apparently) according to the code, and after the failed update the phone was acting stupid and cutting out when it wants so i flashed the phone with the rogers rom, and it worked fine attempted to do the mango update again in a diff usb port and got the same error so i went to reflash the phone again so i could get my mate to try his cable the flash seemed to go through with no issues until the first reboot, then instead of getting the connect to computer screen i just got the samsung logo flashing up then restarting and flashing the samsung logo again i have tryed to flash again with diff versions of the tool and original rom and rogers rom many times but still get the same thing the only strange thing is that i cant get into the hard reset mode i can get into download mode fine but not format it just flashes back to the same flashing samsung screen Please Help or is the phone Buggered at a wild guess iv got a problem with the internal memory ??? Lost and need help

same here, please help

amitbhavi said:
same here, please help
Click to expand...
Click to collapse
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?

EnderPsp said:
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
Click to expand...
Click to collapse
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop

reycarp said:
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
Click to expand...
Click to collapse
I see. You're the 4th person I encounter having this problem after flashing magldr. You should ask in the magldr thread. I'm not sure if it's really magldr related but I don't see anything else that could cause it...
Make sure you specify there your revision(3/4)/ as well as OS version.