Database Users

Please save my SP3i :(

lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance

dopod 818pro please help.. downgraded and dead

I have a phone locked to the Taiwanese CID, and therefor tried to unlock this so that english rom upgrades could be installed. Now, to do this I first had to do a downgrade, which I got from the internet, pdamobiz.com_downgrade_and_unlockcid.rar . After the downgrade, the phone was suppose to restart and again enter the first fase of restarting. This did not happend, it just stopped at the first picture, the one with the Dopod logo and info about OS and other things. Completely locked.
This means that I can not connect to my computer. Also, a hard reset is not possible, after formating the disk, the phone just returns to this first picture, without any reinstalling of the original rom. What should i then do?
Could somebody please help get my phone back on its feet?
The OS is now 1.0.13.21

Problem after upgrade to WM6. Please help!

I have serious problem with my PDA SPV M2000 after upgrade to WM6. After upgrade i try to restart my PDA with Hard Reset, but can see only 4 collored screen. I can acess only bootloader mode and nothing else... PLEASE HELP

reflash
Did you try a reflash?

I try all the steps 5 times but nothing. I try use WM6 from helmi and xpode. With the same resolution. Now i try to downgrade to WM2003...

I am back on WM2003. Thanx god

I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....

brb66 said:
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
Click to expand...
Click to collapse
the grey screen with serial v 2.07 is the bootloader mode...
maybe a reflash will do the trick...
how did you screw up the upgrading process? did you accidentally unpluged the cable? is it a corrupted file?
I have never experienced this, but, if i were you, I would reflash it. if nothing good come up,then maybe the file you are using to upgrade is corrupted...
hope this helps, and maybe the experts would have more ideas cause i am just a user.....

I've upgrade to WM6.0 pdaviet, but can't use GSM network : no services...
Any body help me plz...

fix it now, pdaviet'rom works well with 1.15.00 radio .
sorry for my English

Ibhave a tmobil MDA amd i did an upgrade to windows mobile 6 and now my MDA is slow in most of the programs also the SMS when inserting any messages the words do not show after at least 10 sec.
Please, definelly need help.

navarde
Have you performed HARD RESET?
What ROM did you use for flashing?
(also some installed programs may slow down your device a lot!)

I had the same problem. From time to time whem im flashing my phone its happening. After few soft resets it'll be ok.

plz help Sp3i freeze on wm splashscreen & cant reflash by USB

my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.

Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.

already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?

Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here

imate jasjam error flashing pls help

hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.

Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps

first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice

roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken