My M600 refuses to boot... just stays on the Start-up screen, can anyone come up with a method of retrieving this phone.
I have tried the original "Orange" ROM but still get the same problem...
Try a hard reset. However this will delete all your information, stored on the phone
Tried all the usual
I have tried a Hard Reset and loads of soft resets, also re-loaded the Orange shipped ROM and various others.
Still refusing to boot
Related
With all this talk about WM5 devices not really resetting everything after a hard reset, and my device being dead and not recovering after a hard reset makes me think, there must be an alternate way to really hard reset a device back to factory condition.
I tried a lot of combinations of presses to no end. The only thing I am suspicious about but did not play with is a red/white round sticker (which looks like it is hiding a button) under the battery (upper left corner).
Anyone know what that is, or is there a way to do a harder reset? Taking the battery out for a few days did not help either.
Because flash memory actually needs erasing rather than just resetting I doubt it is possible to clear it with a simple button press. It may be you can do a normal hard reset and hold down a button to bypass loading data from the flash then format it. But I've no idea really.
Jamie
Re-flash the ROM?
uuummm some where in this forum i read that if you have wm2005 and go to boot loader mode you get an option over there to clear the cache or memory something like that, and that would give you a clean installation.....
haven't tried it though.....and i doubt i would get such an option in wm2003se, also i have a similar problem i did a complete flash reinstallation of rom to my device and after the installation i opened windows media player (wasnt the first thing i opened, but didnt copy any files)and guess what....i had a song available over there..... which i could actually play and it did....i checked the location of the file and it was somewhere in my device or documents dont quite remember i did a hard reset again and same issue....
after that i have'nt tried anything the rom is same i just deleted the folder manually but i would also like to know how to TOTALLLLLLY ERASE ALL DATA from the device and clean install everything
regards
on the XDA II and WM5 you hold down the buttons to resent stage then i gives you three options. One of these I am sure clears the phone
I hard reset my Universal several times (well I think I did at least)
Press the soft reset plus the two "-" buttons and you will have a white screen asking if you want to put back your HTC back factory default
Unfortunately that standard hard reset, doesn't do it. I am still stuck at reboot, and the radio rom version shows the attempted upgrade version (01) that started the problem in the first place.
i tried some of them according to herein, but some of them were not function.
http://wiki.xda-developers.com/index.php?pagename=Universal_Technical
there's a little icon called "clear storage" which brings your settings to the factory's default. what's wrong with it?
i'm stuck too in bootloader with my mda pro
atekant said:
Unfortunately that standard hard reset, doesn't do it. I am still stuck at reboot, and the radio rom version shows the attempted upgrade version (01) that started the problem in the first place.
Click to expand...
Click to collapse
This may be too late, but there's no way to do any sort of a reset to revert back to a previous ROM... the only thing you can do is reflash the earlier ROM.
Brett
ok ... now the final BIG request ... who can give us an update that works. the patched Maupgradeut_noid is not working with the latest upgrade.
thanks.
To revert back to clean copy of OS (i.e newly installed OS)
Hi,
Just to share with you my experience in reverting my phone to its original OS condition. Before that, just to give you guys some background.
1. Upgraded from PPC2003 to WM5
2. Tried install some patch to enable file transfer (OBEX) in BT
3. Suddenly, the phone screen gone missing. Phone shows No Signal. Cannot receive call.
3a. Did a OS reflash again, but still does not solve the problem.
4. **Panic for a moment **
5. Looked thro Program Files, and seems like some appln i installed were not erased despite doing a hard reset. So, i guess the hard reset doesnt erase some portion of the memory
6. Googled for a solution, but most said do hard reset
7. Went back xda-developers.com site to look for solution
8. Finally found a method. see http://forum.xda-developers.com/showpost.php?p=1164331 to do a format on the memory
Now, my phone is working fine. The phone screen is back and it shows my telco name, and can receive call
Hope this helps.
Rgds,
Choon
you're in the wrong forum mate
I hope sombody can possibly help...I've just recieved my Jamin in the mail, and tried to turn it on...but it seems to get stuck in a blue screen that has the i-mate logo, and the system info in the top left corner. I've tried several soft resets, and tried to hard reset to no avail.
Is there anyway to get around this? Or is my brand new toy already broken.
Thanks in advance for any suggestions or help.
When you said hard reset, do you mean you DID hard reset it but you still facing the same problem, or you are not able to perform hardreset at all?
I did a hard reset, and that put me at a screen with three color bars running across, Green, Red, and blue. At that point I was stuck again...had to soft reset to get ot of that screen.
Thanks!
get it to the blue/red/greem screen again and flash it to the latest Imate Rom.
I can get it to the tri color screen, but my PC won't recognize it, so I am unable to flash it with the latest ROM. Any suggestions?
Found the problem!!
I was hitting the wrong buttons for the hard reset. Hit the Comm mgr, camera, and soft reset buttons, then hit send when prompted. It returns to the boot screen, and after several minutes, will finally start up.
Thanks for the help!!
Hello, i've recently bought an used qtek 9100 Phone, with SNE on it.
The phone worked great until i did run a program that were installed on the phone, after i started the program the phone screen went white, and i had to remove the battery. When i turned on the phone agian, the SNE screen appeared and the phone seemed to start normally; though when it went to the: Touch! No Evil text, it wouldn't go any futher and it still won't
Is there any way to format the phone? or what can i do?
I've already tried both of the reset things without success.
Thanks
If both Soft Reset and Hard Reset doesn't work,the only other alternative is to reflash a fresh rom,cuz some program files have corrupted the 'Extended Rom' probably.
Cheers!
I don't know if the phone is bricked or what. Was in the store tonight, tried to text message my wife who I couldn't find and the phone was all locked up.
Soft reset, and only the date/time loaded, nothing would run. Soft reset again, and the phone didn't load past the bright splash screen. Tried soft reseting a bunch more times, nada. Did a hard reset, first one didn't work. I think it was the 3rd hard reset that took. Phone seemed like it was back to basic WM5, would be okay. Went home, put it on the charger.
Went to take it off the charger to reload data, and it won't turn on. Soft reset, freezes at bright splash screen. Hard reset, same thing.
Is my phone bricked? Anything that I can do to revive it? Or am I SOL?
Cingy/ATT 8525 w/WM5
(By "bright splash screen" I mean when the splash screen flashes brightly. It increases brightness, but just stays that way.)
Any help greatly appreciated.
I managed to load the official WM6 ROM (spl 2.03) via the built-in bootloader. I have radio, ROM, and GSM. It boots through the ATT animation, then freezes. It leaves a black screen with a blue and green static bar running horizontally across the screen about 1/4" thick.
I don't know how to get Hard-SPL loaded on the device because the only way I can see the device is when it's in the built-in bootloader mode.
will attempt PB/KITL I guess, though I can't at this point get the phone to display the KITL info.
No KITL in the ATT WM6 ROM.
Managed to get ATT WM6 ROM through the setup, after the "customization (bloatware)" it reset, and now it sticks on the bootup animation.
So close, I have SSPL and Hard SPL on the micro SD, if only I could get to the damn file manager. If I could somehow cancel out the customization process grrr.
On power charger, I seem to be able to get through the setup after a hard reset okay. It just won't boot after the reset.
Any ideas. I gotta get a few hours sleep. Sorry if this dialog to myself is in the wrong area, I didn't notice the "bricked hermes" thread was in the upgrades, etc area.
viatorx said:
No KITL in the ATT WM6 ROM.
Managed to get ATT WM6 ROM through the setup, after the "customization (bloatware)" it reset, and now it sticks on the bootup animation.
So close, I have SSPL and Hard SPL on the micro SD, if only I could get to the damn file manager. If I could somehow cancel out the customization process grrr.
On power charger, I seem to be able to get through the setup after a hard reset okay. It just won't boot after the reset.
Any ideas. I gotta get a few hours sleep. Sorry if this dialog to myself is in the wrong area, I didn't notice the "bricked hermes" thread was in the upgrades, etc area.
Click to expand...
Click to collapse
Not sure I fully grasp what's happening here, but if you want to stop the customisation then hard reset and when it goes to the loading cusimisation stage shove the stylus in the hole to do a soft reset and it will stop it loading.
Mike
Alright, thanks, will give that a try.
I managed to run the official ATT WM6 ROM and flash it without a hiccup (twice), and task 28 in bootloader says no bad blocks. So I am confused how I can flash an "official" ROM successfully and the device still won't work. Am starting to suspect hardware failure apart from memory.
Thanks a million mate, that worked. Phone boots now, already have SSPL installed. Need to update .net and activesync for Hard-SPL 7 to run I guess. Then I have more options.
Woot! I unbricked my phone
Once I was able to hard reset and cancel the "customization" I ran SSPL, then Hard-SPL 7, then I Super-CIDed the device.
I haven't tweaked the data settings yet, but I can send/receive phone calls. Which is a coup, because this is my main line.
It runs sluggishly. I don't know if that is the ROM or the device. It won't boot if it's plugged into USB, and after flashing Hard-SPL it isn't a recognized device by windows, won't connect to activesync.
I am treating the phone gingerly right now, will try and unload the ATT wap settings cab and restore my pim.
At least now I have the option to install another ROM if it bricks on me again.
I really should have flashed Hard-SPL the DAY, the MINUTE after the warranty was up. Lesson learned.
Or not.
ATT ROM locked up on me, decided to try Schaps 4.40. Won't load past WinMo "tap screen to setup" screen. Guess I'll try something else.
For a stable WM6 rom try TNT SE. It is REALLY stable but does come with some 3rd party apps. Thought you might like to get it working though first then try the other roms and in my experiance I haven't found many other roms that were THIS stable...
Hope you get it working...
For a disassembly guide try this site - http://michael-channon.spaces.live.com/PersonalSpace.aspx?_c02_owner=1
Its a bloody good place to go for all things to do with hardware and Mike is a true guru with hardware problems...
Cheers...
Hi XDAers,
I have tried a number of things and is at a loss - I have a 2 years IMAT KJAM Wizard G4. The problem occured 2 days ago when the device just freezed on me. I did a soft reset, booted fine but then came up after the initial load screen (WizardLove AKU 2) with a white screen.
I have reloaded the IPL, flashed the ROM with WizardLove again, Hard reset back to factory defaults, soft resets the works.
After ROM flash it boots up, i get ActiveSync to load and connect fine. but with in 5 - 10 after having the phone up and working the screen goes white.
If any one has any idea what could up with the Wizard device please let me know?
Regards,
Hennie
I have the same problem!
Not sure how hard it is to fix but it seems to be a component issue,
Iknow its a different phone but check out:
http://forum.xda-developers.com/showthread.php?t=303872
I havent tried it yet but it worked for them