Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Help! My Dopod D810 dead, can only run bootloader
All ROM I tried are not accepted by bootloader. What can i do?
fuego_nl said:
I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Click to expand...
Click to collapse
qtek s200- prophet problem please help
After reset work but screen is blank with green and blue lines,can some body help
Hey all
Apologies if this has been covered before. Have read many threads but still have the problem.
I have an Orange M600 G4 which I unlocked using the Lokiwiz03 util. This appeared to be successful and I was able to operate the device on a different network.
the next day I reset the device (using stylus in hole) and it now boots no further than the orange splash screen where versions are displayed.
I have entered the bootloader and attempted to reflash with a couple of different Roms - The Prophet_Orange_UK rom and a NVID_WM5 Rom. Both appeared to be taken ok and completed. The device still sticks at the same point on rebooting though (Orange Splash Screen).
Anyone able to assist me with this at all?!
Many thanks.....
i had a similar problem, my jamin was stuck in bootscreen, i tried all methods no one was usefull...one day i tried to power up while charging and problem was solved...no stuck at bootscreen or so..=) donno if it works works for you but worth to try...
.... Seems the device will boot after about 30 minutes if left. Same thing happens again if reset. Very confusing and annoying!
Last night, I had some problems with phone, was working very slows, so I did soft restart. since then phone was not bee able to boot up.
When the phone boots, it stays in subslpash screen - htc logo.
What can I do to fix this, what could be a problem..
I have Hermes 8525, WM 6, Radio drivers v1.54.30.10
Herme 100
IPL-1.04
SPL-2.10 Olipro
I got it to work. Had to hard reset, clear all data.. and so on.. luckily had PSB backup from few weeks a go.
I loaded the latest version of Scotty's s93 Titanium rom and it was all working perfectly apart from a couple of annoying problems.
A few weeks later I thought i would try his HTC HOME rom but it didn't even past the update screen because it couldn't connect, or something like that.
Shortly after that the device froze so i soft reset it and it froze again after loading up ok. Did a hard reset and now it either stays at the multi coloured screen or at s93 loading screen after a soft reset.
Not sure what to do now. The IPL shows 1.04 and the SPL shows 2.10.olipro
Found a procedure on win4mobile that uses MTTY but that hasn't done anything.
Any advice would be much appreciated.