Related
Hey All,
Have a BA, go a little wet but it seems to be working fine. Dropped it and now having a few problems with sound. I wanted to exchange it via the warranty program but was told if there is any evidence of water damage I have to pay up. Decided to go get a Wizard and realized that both the BA and the Wizard has a white "tab/sticker" right near the SIM card. His BA, and both of our Wizards - tab is white. My BA that got wet - tab is pink. I'm just wondering if this is like a "litmus" test for water damage? Is there any other indicator that moisture was on the inside that I should look for? Thanks.
Hey
Mine turned wet too, and my little lable also turned pink, maybe it is not really like an indicator, but a water-absorber thingy... dunno really.
By the way, I have a Wizard.
Take Care!
Rik
that's exactly what it is and some, if not all, carriers take it seriously. if it's pink, I think you can probably forget about getting anything for free.
One of the first questions warranty service will ask you is "Does that sticker still exist and is it white?". Answer no to either on and they will tell you that your warranty is void.
Hello everyone! I have problem with my phone because sometimes is turning off without any reason, I bought brand new battery and is still same when is switched off and I want to put it back on i must take off battery for couple of minutes, then put battery back and then switch on anybody know whats happened?? And how to fix it!!
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Thanks for reply!
Uff.... first way to fix it is a little bit too expensive! And 2 way to do it seems quite easy, so i try to do it this way Could you add any picture of this and just tell me how to open this phone?
Many thanks!
@Firestarter42
Thanks man!!!!
did what you said, the plastic trik, and the phone is back to life (it was totally dead and didn't charge) you save a life today!!!
I had the same problem untill one day when he didn`t want to turn on and now i do not know what to do with it how to make it work again
Dear Sir,
I have just tried method 2.
My elf didnt have a metal cover on the processor, lol... got it used from someone... or should I say abused? lol
anyway, I hope it works. will update...
here's a link for the demonstrated tutorial:
http://forum.xda-developers.com/showthread.php?t=476152
Thanks a lot again.
I haved the same problem.....and i realize after many times that I didn't change my ipl and uspl!!!so my cocked rom frequentely turn off my device!!!now it's all right!!!!!!!
i had the same problm too....
it kept turning off and just a few weeks ago it would never turn on...
i did try that trick of keeping the plastic thingy on the omap processor ... it worked for a few weeks max after tht it happened as above
finally took my phone to htc.. told them it was gift and i dont have the invoice... actually purchased frm ebay for 150$ .....
they checked it was in warranty,.. they replaced the board... hurray... my elfin is alive again.. and in wm6.1
hope htc fixes this crap issue as many face this problem
My HTC elf was freezing, rbooting and so on, i was thinking that it was a windows/flash/third party programs problems ....
BUT I confirm that the method "open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it"
brings my htc elf to life again ... stable !
(i've done it with a metal piece and not plastic.)
Thanks for the advice !!!!
my elf was freezing and turning off so i try this 2. method and it works, and elf is much faster then before in my case...
I've never had this problem before but this week my phone switched itself off (so had to boot up again) a couple of times. I did try a new custom rom but I've also been using a different charger (USB mains adaptor) and a replacement battery (this seems to be a poor replacement battery which seems to make up the battery level.
So I don't know what was causing it. For some reason, removing the SD card and re-inserting it seems to have done the trick for now but I'll keep watching it.
Hi guys
My phone is, usually at night when there is no use, switching the screen off, the earphone green indicator flashes but the phone will not turn on when I press the power button, I have to do a soft reset each time to get it back on again (even though it appears to be on with the flashing green light). I cannot get calls or text and my alarm fails to sound. Have overslept a few times now!. Also, its battery has gone for a ball of ^&*%. Will this trick help? Thanks a lot!
Turn off as in literally 'poof!' or, it will restart?
The only way to get it to restart is to do a soft reset, or remove and replace the battery. The phone's green light will flash but there is no way to the screen to activate or use the phone - make calls, use the alarm, receive etc. The screen stays black, no use trying the power button either...
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
Thankx your solutions worked out with my HTC Touch and i get replaced omap processor
power problem on Elf (not the usual)
hello guys, i have an Elf T-mobile that someone "lost" i found it, but was bricked...i unbricked following the awesome guides on the forum and installed on it the original italian rom (obviously am not german)
but...here's the problem, when i press the power button (should get it into stand by mode like every pda does) or also when goes on stand by itself, just shuts down !!!
then the pda auto soft resets, until the end...doesn't have the "auto power off problem" like i readed on the forums...however it tried but didn't solve the problem
i think is a problem with the radio, or the IPL or SPL (i tried 1.11.0002 IPL and 1.11.000 SPL...then 2.2x.xxxx IPL and SPL...now i tried 3.14.0002 IPL and 3.14.0000 SPL, also tried different radios...
but the problem remains...
EDIT: Problem solved, changed the little battery in the motherborad, it worked for me
help
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
can any one provide some sought of tutorial for this please
thanks
ishaan_chd88 said:
can any one provide some sought of tutorial for this please
thanks
Click to expand...
Click to collapse
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
captainstu72 said:
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
Click to expand...
Click to collapse
thanks man but i guess am so dumb that am not getting where is this processor located anyways currently my phone is working fine but in few days I'll get the tools & open it...let see than
if you can arrange any pic of processor(where we have to fit plastic) it will be extremely helpful...
anyways thanks for helping
tc
where to get small battery on mother board
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Today I noticed that my HD2 vibrates strangely, it sounds like a shaving machine when vibrating
I performed many soft resets, hard reset, then I flashed an offcial ROM, SPL, etc. but nothing works. I guess the problem is related with the vibration hardware.
I will be sending my phone to HTC service tomorrow, and let you know about the results.
Anybody faced the problem? Or any suggestion before sending the device to service?
Thanks...
vizier said:
Today I noticed that my HD2 vibrates strangely, it sounds like a shaving machine when vibrating
I performed many soft resets, hard reset, then I flashed an offcial ROM, SPL, etc. but nothing works. I guess the problem is related with the vibration hardware.
I will be sending my phone to HTC service tomorrow, and let you know about the results.
Anybody faced the problem? Or any suggestion before sending the device to service?
Thanks...
Click to expand...
Click to collapse
I remember (2months ago) that my vibrate works strangely, i hard reset and it works again perfectly!
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
avivsworld said:
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
Click to expand...
Click to collapse
I think I have the same problem, my camera flash seems to be pressed in (one side of it).
Is there an easy solution or should I hand it to the service?
Thanks...
avivsworld said:
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
Click to expand...
Click to collapse
I am trying to find the older posts you mention, but no luck so far. Can you post the links to those post, I might be searching with the wrong keywords or something like that...
Thanks...
Vibration seems to be a big problem. I had the same issue. only solution: warranty repair. my phone was replaced by 02.
vizier said:
I am trying to find the older posts you mention, but no luck so far. Can you post the links to those post, I might be searching with the wrong keywords or something like that...
Thanks...
Click to expand...
Click to collapse
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
avivsworld said:
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
Click to expand...
Click to collapse
This is exactly what happened to my phone. The lower part of the plastic flash cover looks pushed in (I checked with another working HD2).
And yes, I handed the phone to the service today. I hope they do not break other things when trying to fix this issue
Thanks...
Vibration lost
avivsworld said:
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
Click to expand...
Click to collapse
Hi,
My Leo stopped vibrating. I saw your posts and checked the camera flash. It was indeed pushed in. My warranty was not valid, so I tried to fix it myself. It was actually very easy. I followed a video showing how to disassemble the Leo . As soon as the housing is removed, we have access to the flash plastic cover. I've just snapped it in very carefully et voilá: the phone is back to its own self!
Many thanks for the tip. I would never have guessed it was related to the flash cover!!
Maria
doloresbf said:
Hi,
My Leo stopped vibrating. I saw your posts and checked the camera flash. It was indeed pushed in. My warranty was not valid, so I tried to fix it myself. It was actually very easy. I followed a video showing how to disassemble the Leo . As soon as the housing is removed, we have access to the flash plastic cover. I've just snapped it in very carefully et voilá: the phone is back to its own self!
Many thanks for the tip. I would never have guessed it was related to the flash cover!!
Maria
Click to expand...
Click to collapse
I am glad you fixed your problem easily.
My phone is still not back from the service
I have my phone back...
Finally, I have my phone back. The service report tells me that they have changed a part responsible for vibration. I checked the vibration functionality and actually it is working fine now. One surprise however is that the flash cover still appears to be pushed in.
Same problem
My TMobileUS HD2 is having the exact same problem - no vibration at all, even after hard reset. I also see the camera light's assembly is no longer correctly positioned in the body as it should be. It seems that the lower end is pulling into the body of the phone.
I treat my phone very gently, so I'm sure this didn't happen from rough treatment. Given that it's happening on a number of contiinents, this looks like a design defect.
TMobile demanded that I send it in for warranty service.
No Vibration Either
I have a TMOUS HD2, and I may have been the cause of this happening after reading this. I have no clue what you're talking about, but I have dropped the phone a few times and though the problem didn't happen right after a drop, it was just odd how it started. I had it set to vibrate when I pressed any keys, and then I was texting and it stopped. So... the only thing that I've seen that is a case that I only seem to have, my phone vibrates AT WILL, but when it does, it's very raspy and sounds very 'sick' and loud. So, I am not about to open my phone. I'm tech savvy enough, but in no way have I ever tinkered with hardware. I got my HD2 back in May, so I'm hoping that I have a warenty through HTC at least. I haven't contacted anyone about this, so is it my best bet to just send it to HTC or contact T-Mobile? And I have insurance, but I purchased my phone from Walmart. lol. Help?
I just came across this thread....
my vibrate function has been broken for several months and I've been delaying sending in for repair because I'm afraid of how long it will take (plus, it is the Australian version so I dont know if HTC North American will actually repair it under the current warranty)
I noticed that the bottom part of my flash does in fact seem to be pushed in. I'm considering doing what Maria did (opening it herself and popping the flash back into place). Does anyone have a sense of how long the repair takes from HTC?
Thanks
VIBRATION and FLASH PROBLEM
i'm having the same problem... lower part of the flash is pushed in. and vibration sometimes functioning sometimes not... but worst my FLASH NOT WORKING AT ALL...
Now having the same problem. This is a design flaw if I've ever seen one.
Same problem here, vibration was not working, but I just fix it!
I bought this T-Mobile HTC HD2 off eBay, and turns out that the vibration was not working!!
Once I found out this thread and the information about how the flash cover was blocking the vibration motor from functioning, I was able to confirm this was exactly what was happening!
So, I decided to open up the phone. I did not had to extract the entire screen piece out, I just had to unscrew the four screws and use a "shower suction thingy" on the screen to help pull it out but just the top part (in other words, half way out), because I only needed access to where the flash cover was, and then I was able to use a thin screw driver to PUSH back the flash cover to it right position. Then, after putting everything back to its place, the vibrator motor started to work!!!
Maybe I will put some "super glue" on the flash plastic cover to secure from being accidentally being push in in the future. Anyways, thank you everyone here on the forum for sharing your ideas!
As a late follow-up to mine... I called HTC and got an RMA number. Put off mailing it in for 3 weeks while I backed it up and arranged a temporary phone.
Mailed it on a Friday. Had it back with a replaced back on Monday.
I was EXTREMELY happy with the customer service on this one!
Missed 3 calls today... realize phone is not vibrating. Check different things that should make phone vibrate... nothing...
Flash lens is not pushed in this time... I'm about a month out of warranty now. Wonder how this is going to go over
I had this exact problem occur a few days ago, and I opened it up and simply snapped the light cover back into place carefully. But my phone still wasn't vibrating, so I opened it up again and I saw that the black rubber around the vibrate motor was causing the part that creates the vibration to get stuck. I simply just snipped a bit away so that the it was free and ta da! However the vibration is still weak compared to before so I don't know how to fix that? hope this helps you, and if someone knows why the vibration might be weaker than before the problem started any help would be great. thanks
Hey guys! I have searched the forums and haven't found a problem quite like this yet. Recently, I got some water on my phone, but was able to wipe it off, and it worked fine, and the water damage indicators on the phone are still white. During that day though, after rebooting the phone, the screen appeared to not turn on, so i thought it WAS water related damage, of course.
I put the phone in rice for a few days, and NOTHING, till one day i looked at the phones screen under intense light.
The phone vibrates after you power it on, but then that's all you get, but upon further inspection under a bright light you can see the MAGLDR boot screen come up, and load all the way to the GO GO GO part, then it freezes and stops.
The screen is still black, and there's no light at all, you have to hold it DIRECTLY under bright light to see it.
I am ..or was...running the android NexusHD2 gingerbread 2.2 NAND (2.3.2) rom with MAGLDR 1.12 installed.
I can get into the boot menu, and all the hard buttons work. I can even play tetris, when i can see it. >.>
The MAGLDR seems to work fine, the android doesnt work, or load anyway.. I an go into USB flasher, option 5 on the boot menu, and reload android, but it does not resolve the problem.
Any suggestions oh wise XDA members?
I am not an expert when it comes to the hardware side of tbe HD2, bjt I am learning. It kinda sounds like you may have got some water inside the unit either through the speaker opening t the top of the front of the phone or in around the small openimgs around the buttons at the bottom of the front of the phone. My bet is it was the buttons cuase this is close to the digitizer. And it sort of sounds like the digitizer is malfuncting.
Seeing as you have tried reflashing the ROM the only real sugestion I got is maybe get you a small hex head screwdriver and open up your HD2. Take the mainboard out and the digitizer out and very lightly use a hair dryer on the low setting to try and dry them out. make sure to bold the dryer a good distance from them cause you do not want to get them hot just dry them out.
Now you still have a waranty I would just do a warranty exchange or have them repair it. If you don't have a warranty and don't want to try this I do not blame you. It is just the only idea I have. You can always find a cell phone repair shop and have them do it.
Best of luck.
This happened to me too. My HD2 was completely submerged, but luckily for me I had the torx needed to immediately open it up. I didn't use a dryer, but I did towel it off. Then I just left it off and apart for 5 days before I actually put in the battery and turned it on. I did have to replace the screen because it cracked to hell, but my main concern was knowing that it would still function. Good Luck.
Okay, I contacted HTC today after reinstalling winmo 6.5 stock for the HD2, A guy named bob told me I could send it in and have it repaired covered by HTC. My guess is that because the water damage indicators are white, they shouldn't void me, right?
I am guessing it IS the digitizer because of the following reasons.
Winmo works fine, though the sim card will need to be replaced, which is no problem. the touch screen does not function and the screen is still black and wont light up, but winmo boots successfully, like I said, viewing under bright light.
I think I am going to try and send it to HTC, if they say its void, then I am going to try repairing the digitizer, as the tmo digitizers are readily available now. Before that though, I will try your suggestion T-Macgnolia.
I'll post my results soon!