Related
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
Is there anyway to easily rotate the screen on the prophet (besides turning it around in your hand) other than going into settings display and changing it there?
Ive tried the registry changes to add an icon but they dont seem to work.
thanks
Try PHM key tools.
V
Well i just figured out i can do it using the built in buttons app in settings :roll: but i ideally want to keep all the existing buttons. For now ive mapped "Comm manager hold" to rotate but I want to add another button cnofig i.e OK button hold that would rotate.
I have found the registry keys which control the buttons but need some assistance in understanding them. I can copy an existing key and with a bit of fiddling have "Button 6" appear in my buttons panel but I need help configuring it to map to a button and function in the correct manner
Hello
The Orange SPV M600 came with a little desktop icon, everytime you touch it, it rotates the screen landscape portrate, left right etc.
I am guessing it operates the built in system settings. I found a CAB in the Orange Extended Rom, if it will work, I do not know, you take the risk.
I have included it here for you to try.
It Works!
NewSPV said:
Hello
The Orange SPV M600 came with a little desktop icon, everytime you touch it, it rotates the screen landscape portrate, left right etc.
I am guessing it operates the built in system settings. I found a CAB in the Orange Extended Rom, if it will work, I do not know, you take the risk.
I have included it here for you to try.
Click to expand...
Click to collapse
Thanks 'NewSPV'. I lost this functionality when I upgraded from the M600 Rom to the Dopod ROM. Glad to have this back, as it also frees up the re-mapped 'Communication Manager' button I used to Rotate the screen. :wink:
Hi,
I installed MoDaCo screen rotate on my Qtek s200.
I finally have an icon on my Today screen!
One little drawback tho, everytime I tap the screen icon it rotates 90 degr. to the left. So the second time I tap it's upside down in landscape. The third tap brings it back to normal portrait mode.
I had hoped it just would rotate left or right and then back left or right.
Now I have to turn my phone to find the icon.
Edward
NewSVP Thanks for the CAB. Works great.
nypra1314, how is the MoDaCo screen rotate different than the M600 cab? Also where did you find MoDaCo's? I searched the forums but no sucess.
Hi niker,
I will try the M600 cab later today.
The MoDaCo cab, I found also in this forum. didn't know it until I installed. In ActiveSync\ Software it is mentioned as MoDaCo.
Thanks!! Will give MoDaCo's version now.. Cheers!
pt_screenrotate acts the same as ScreenRotate from MoDaCo. :-(
One other drawback tho, I can't locate it in software installations, to remove it, because PT is 88Kb and SR is only 42!
How do I uninstall PT_ScreenRotate please?
Edward
try AEButton
phoneAlarm has a nice little exe in it's directory called rotate.exe which flips between landscape and portrait, rather than going from right handed landscape, upside down, left handed landscape and back to portrait.
I'd post it here, but I'm sure it's copyright software. You'd probably get it in the trial version.
Wisbar 2 has function to rotate screen , with it installed you can set a hardware button to rotate portrait/landscape
On my M600 I just hold the Comm Manager button to rotate screen...
If you're looking to get rid of the menu bar at the bottom of the Today Screen, read on. This is not a new tip, but might save you time, as there's a lot of different versions of these programs flying around. Only the one below works on WM6 / HTC Touch.
I personally find that the Menu Bars at the bottom of the Today Screen really spoil the look of the HTC Touch's sleek black/grey theme. Besides, the Comm Manager and Contacts are both accessible via the spinning cube (or the camera button if you install Double Launcher) so there's no need to have on the Today Screen, you may as well get more space for plugins, or just to keep everything looking neat and tidy. See screenshot below!
Here's how to banish them forever (?!) :
1. Download ToggleTodayIIAlpha from this link:
http://www.vijay555.com/vj/releases/vjtoggletodayii/vjtoggletodayiialpha.exe
2. Copy it to your \Windows\Startup directory. (or somewhere else and paste a shortcut instead)
3. Go into the registry and edit this key:
HKLM/Software/Vijay555/VJTodayToggle
Change these keys:
Softkeysize = 1
StartSize = 26
TrayVisible = 1
That's it! I've had no massive problems with this so far, although I haven't been testing it for too long. I'd be interested to hear how people get on in terms of stability/bugs. You WILL get problems if you try to use any of the older VJTodayToggle programs in the thread on this forum:
http://forum.xda-developers.com/showthread.php?t=243211
(SIP keyboard staying on, SIP moving to the top of the screen, menu titles disappearing but not the background, etc.)
...in fact, that's precisely why I'm sharing this info with you, as this thread is 39 pages long and it's only towards the end that things become totally clear! I'll post again if there's any unexpected side-effects, I'm currently minimising BatteryStatus and I don't know whether this will
Good luck!
Carlos
NOTES / ADVANCED
=======================
A: If you want to make your screen even neater AND still overclock your Touch, then, in step 3 above, you can make TrayVisible=0 then you can minimise the BatteryStatus plugin and it won't show up on your today screen. (right click on batterystatus icon, choose 'show rows -> minimise') I haven't tested this properly yet.
B: If you want to explore hiding the Start Menu, feel free, it looks superb when you first do it, but then I have found that the HTC biotouch (spinning cube) automatically re-instates the start menu bar when it's deactivated each time.
C: Please note, this program ( tt2.exe) DOES NOT TOGGLE, even though it's called that! Again, it's a 39 page thread, I warned you...
D: You can also run TT2.exe with a -config option to avoid editing the registry, but this would actually make the above even more long-winded to explain to any n00bs.
E: A nice new HTC wallpaper is doing the rounds without the logo. (As you can see from my screenshot, it's mis-positioned with the extra screen space) See http://forum.xda-developers.com/showthread.php?t=319830
F: Vijay555 has been meaning to release a new (non-alpha) version of the software for some time, but sounds pretty busy. He seems like an all-round splendid guy though and I'd like to thank him for this software and his continued postings/programming.
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
BigDede said:
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
Click to expand...
Click to collapse
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
carlosp_uk said:
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
Click to expand...
Click to collapse
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray (the bar just above the softkeys bar) where we can add shortcuts icons and keep the softkeys bar enabled..
Im disappointed but thks for vijay555 for all the efforts
Perfect... without HTC Logo is even better...
Thanks Carlos,
I've just installed and its working fine. With the clean background from http://forum.xda-developers.com/showthread.php?t=319830 looks even better.
Cheers,
Marcelo
BigDede said:
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray
Click to expand...
Click to collapse
See my original post, have you tried setting TrayVisible=1 in the registry, this should show the system tray.
I followed exactly what u posted, it displayed it correctly the first time, then after soft reset it was displaying only the softkeys bar and hiding the system tray bar
Thks anyway
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens.
Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
maevro said:
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens. Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
Click to expand...
Click to collapse
The menu bar is visible on other screens, this behaviour is by design. I cannot see why anybody would want it invisible on other screens, as you normally need those softkeys for menus in most programs!
As far as I know you can use the bottom of the screen, it is not dead space. But why not try it out - it's unlikely to do any harm. You can always delete it from your startup directory to uninstall if you don't want it.
C
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
V
vijay555 said:
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
Click to expand...
Click to collapse
Thks a lot vijay555
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
maevro said:
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
Click to expand...
Click to collapse
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
--Marc
soulstar said:
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
Click to expand...
Click to collapse
Just soft reset your phone.
marc2503 said:
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
Click to expand...
Click to collapse
Use the HTC Home customizer to "unlock" it. Then you can move it around like normal.
However, it doesn't redraw correctly on the right side if you unlock it, and a scrollbar comes and goes.
i have a other solution!! PCM shrink installe it and your bar remove it s very easier! For become to the original config juste delete the programmz!!
won't stick
Hi..very nice and easy Zip File..just one problem: the toggle won't stick after a soft reset = one has to go into File Explorer..double click the Toggle File and only than the screen is "clean" again.
Any way to make the toggle "stick"?
I have not this problem! I install the cab i going on the explorer and today shrink and clik on after i reboot my pda ans the bar not appear ... You can try put a abbreviated of today skrink in WINdows/started for star the application automatic on windows sartup
the result of the appl:
I have this running at startup on my Tilt, works with screen rotations and everything! And the hard keys are still mapped to calendar and contacts for quick access, awesome.
Many thanks, couldn't stand those useless soft keys before.
- Charles
Hi all,
does anybody know if there's a way to quickly change between landscape & portrait on the Trinity - or to set up a hot key to do so?
Thanks.
Of course there is. For instance, install SPB Pocket Plus and assign Rotate Screen Left or Rotate Screen Right to one of Trinity's buttons. There are actually many applications that offer screen rotating function.
You don't need any tool. Just use the normal WM5 settings to assign new functions to key 1 (voice recording) and key 2 (camera). One of the selections is "<Rotate screen>". The assigning of "<Rotate screen>" to the "voice recording" key was one of first things I changed in the Trinity settings.
What about on the screen
...thanks for that, but I kind of like those keys for the camera and sound recording. Is there any way you can put a shortcut on the Today screen to perform the same task?
In Today screen there is by default an icon to rotate the screen!
Icon?
I can't find a default icon on the Today screen for changing screen orientation - can you tell me what it looks like and where it should be?
Thanks
tjw2007 said:
I can't find a default icon on the Today screen for changing screen orientation - can you tell me what it looks like and where it should be?
Click to expand...
Click to collapse
This is part of the HTC-plugin. It should be installed on your device if you have an unbranded Trinity by HTC. It includes a battery indicator and icons for the light settings, the comm manager and the rotation. Those four icons should be in a line somewhere on your today screen.
Exactly.
Starting from left to right I have:
Battery status - Screen orientation - Comm. Manager - Light adjustment
In particular the screen orientation icon is the one with the picture of the P3600 and the stylus pointing its screen
ah!..found it - i could have sworn the screen orientation icon was for something else. Thanks to all.
Hi to all,
I have a question....
On Blackstone we have two custom buttons the home button and the back arrow button
now pressing the home button is like go to desktop in normal windows terminology.
But are we able to change the back arrow button to toggle (alt+tab) between applications.
i mean it partially does that when appication are on the screen but it doenst do anything when applications are running in background..like for e.g. say...i have explorer and wmplayer open then i press the home button..they ll be minimized in the taskmgr but back arrow is not usable in this case.
I think that ll make life very eazy for ppl who have bunch of applications running and needs to switch between them...as the taskmgr on the main screen is usually slow responding and again it saves clicks...if u know wat i mean..
thanx to everyone in advance..
Check MobileMagic, you can do that with this tool as far as I remember.
itsjatt5 said:
Hi to all,
I have a question....
On Blackstone we have two custom buttons the home button and the back arrow button
now pressing the home button is like go to desktop in normal windows terminology.
But are we able to change the back arrow button to toggle (alt+tab) between applications.
i mean it partially does that when appication are on the screen but it doenst do anything when applications are running in background..like for e.g. say...i have explorer and wmplayer open then i press the home button..they ll be minimized in the taskmgr but back arrow is not usable in this case.
I think that ll make life very eazy for ppl who have bunch of applications running and needs to switch between them...as the taskmgr on the main screen is usually slow responding and again it saves clicks...if u know wat i mean..
thanx to everyone in advance..
Click to expand...
Click to collapse
Check out WkTask - it display all running apps on the top bar the way Windows does on the taskbar on the PC! Just tap one of the icons and you switch to that app!
Hi guys ..thanks for the replies...tried both of the softwares ...MobileMagic..is not able to offer taskswitch function...and wktask is gr8 but messes up my keyboard font...its strange..any workaround ? i am using htc full qwerty keyboard.
Just download Spb PocketPlus, install it, go to the installation folder, find the file called AltTab.exe, save it.
You can uninstall P+ then and assign the "Back" button to launch AltTab.exe. But you will need AEButton+
This is how I live with my Touch HD
itsjatt5 said:
Hi guys ..thanks for the replies...tried both of the softwares ...MobileMagic..is not able to offer taskswitch function...and wktask is gr8 but messes up my keyboard font...its strange..any workaround ? i am using htc full qwerty keyboard.
Click to expand...
Click to collapse
I guess I remembered it incorrectly, Alt+Tab action does not exist in MobileMagic, it is available in AE Button Plus.
Also there is no need for the AltTab.exe of SPB Pocket Plus, AE Button Plus is enough to accomplish this.
However, AltTab.exe might provide a better user experience, I will try it anyway.
Try TaskFacade!
itsjatt5 said:
Hi guys ..thanks for the replies...tried both of the softwares ...MobileMagic..is not able to offer taskswitch function...and wktask is gr8 but messes up my keyboard font...its strange..any workaround ? i am using htc full qwerty keyboard.
Click to expand...
Click to collapse
That's odd... What exactly is getting messed-up? Could you upload a screenshot?
I've never had any problems using WkTask - and I have used it on pretty much every ROM I had on my HD!
BTW: I use the same keyboard you are using... no problems!
I've tried TaskFacade but it crashes on me ALOT and I can't seem to map it very well with AEButton.I wanted to map it to long 'Back' but it never works.
I don't have a HD (yet), so I don't know if this will work for sure...
But I use a little free app called HButton on my XDA Orbit (Artemis?), which allows as many functions as you like on one button (by holding the button down until the required function/app appears).
This also includes a task switcher function.
Worth a try.
Hi Guys thanx for the replies again...
by messed up i mean the text on the htc sip keyboard is like times new roman in normal (not bold tahoma) and it looks ugly...i have tried removing the application and it still is the same...can anyone upload the default font cab
thanx