Is there anyway to easily rotate the screen on the prophet (besides turning it around in your hand) other than going into settings display and changing it there?
Ive tried the registry changes to add an icon but they dont seem to work.
thanks
Try PHM key tools.
V
Well i just figured out i can do it using the built in buttons app in settings :roll: but i ideally want to keep all the existing buttons. For now ive mapped "Comm manager hold" to rotate but I want to add another button cnofig i.e OK button hold that would rotate.
I have found the registry keys which control the buttons but need some assistance in understanding them. I can copy an existing key and with a bit of fiddling have "Button 6" appear in my buttons panel but I need help configuring it to map to a button and function in the correct manner
Hello
The Orange SPV M600 came with a little desktop icon, everytime you touch it, it rotates the screen landscape portrate, left right etc.
I am guessing it operates the built in system settings. I found a CAB in the Orange Extended Rom, if it will work, I do not know, you take the risk.
I have included it here for you to try.
It Works!
NewSPV said:
Hello
The Orange SPV M600 came with a little desktop icon, everytime you touch it, it rotates the screen landscape portrate, left right etc.
I am guessing it operates the built in system settings. I found a CAB in the Orange Extended Rom, if it will work, I do not know, you take the risk.
I have included it here for you to try.
Click to expand...
Click to collapse
Thanks 'NewSPV'. I lost this functionality when I upgraded from the M600 Rom to the Dopod ROM. Glad to have this back, as it also frees up the re-mapped 'Communication Manager' button I used to Rotate the screen. :wink:
Hi,
I installed MoDaCo screen rotate on my Qtek s200.
I finally have an icon on my Today screen!
One little drawback tho, everytime I tap the screen icon it rotates 90 degr. to the left. So the second time I tap it's upside down in landscape. The third tap brings it back to normal portrait mode.
I had hoped it just would rotate left or right and then back left or right.
Now I have to turn my phone to find the icon.
Edward
NewSVP Thanks for the CAB. Works great.
nypra1314, how is the MoDaCo screen rotate different than the M600 cab? Also where did you find MoDaCo's? I searched the forums but no sucess.
Hi niker,
I will try the M600 cab later today.
The MoDaCo cab, I found also in this forum. didn't know it until I installed. In ActiveSync\ Software it is mentioned as MoDaCo.
Thanks!! Will give MoDaCo's version now.. Cheers!
pt_screenrotate acts the same as ScreenRotate from MoDaCo. :-(
One other drawback tho, I can't locate it in software installations, to remove it, because PT is 88Kb and SR is only 42!
How do I uninstall PT_ScreenRotate please?
Edward
try AEButton
phoneAlarm has a nice little exe in it's directory called rotate.exe which flips between landscape and portrait, rather than going from right handed landscape, upside down, left handed landscape and back to portrait.
I'd post it here, but I'm sure it's copyright software. You'd probably get it in the trial version.
Wisbar 2 has function to rotate screen , with it installed you can set a hardware button to rotate portrait/landscape
On my M600 I just hold the Comm Manager button to rotate screen...
Related
I've just upgraded TT to 06 and, suprisingly... the smily icon to rotate the TT screen from portrait to landscape has disappeared... have they hidden it in any other menu?
My car holder requires me to show landscape, but when I close my JasJar with the screen upwards it goes automatically to portrait and TT, without and indipendent command to rotate screen, goes to portrait as well... so I have to go out of TT, change screen setting... and go back in...
I am sure there is a better solution... thank you!!!
Chris
hi, i am having the same annoying problem. unfortunately tomtom has not included this option in the latest version. the only solution i have come across so far is getting yourself phoneAlarm 1.56.1 by pocketmax. this application have got a pawerful profile manager which allows you to rotate the screen and luanching tomtom at one go and much more. so basicly instead of tapping many times all you need to do is just change profile from home to car. and u are done. the one think i dont like about the application is the fact it is not only profil manager but "bigger" plug-in.
has anybady know a plug-in which is only profile manager which would let me do the same ?
cheerz, cudo
For that, I use PocketZenPhone...
hi, thanks for pointing this out "For that, I use PocketZenPhone..." it is really cool application and it is only a profile manager with loads of options. thanks again. now all my problems with tomtom and rotation every time i want to use it are solved. the application start tomtom, rotate the screen and turns on the bluetooth for me. have a look at how it looks on today screen
cheerz, cudo
cchris said:
My car holder requires me to show landscape, but when I close my JasJar with the screen upwards it goes automatically to portrait
Chris
Click to expand...
Click to collapse
Isn't it possible to leave your jasjar in laptopmodus in your carholder?
That way you have landscape plus the advantage of using the keyboard for navigating through TT
You're welcome. Same use for me... You can also create a shortcut on today launcher like iLauncher or SPB PocketPlus refering to navigation profile you défined in PzP... That's what I do, no today plugin, only systray...
So is there a fix for the screen rotation problem on Tomtom 6?
What's wrong with a mort script or whatnot?
I've written VJUzumaki, which will fix this problem, but not available for release immediately...
V
vijay555 said:
What's wrong with a mort script or whatnot?
I've written VJUzumaki, which will fix this problem, but not available for release immediately...
V
Click to expand...
Click to collapse
I'd be very interested if you have a fix for this problem. Not being able to rotate the screen in tomtom 6 is a real pain.
Could you keep us posted on its development please?
Thanks
I've posted in a couple of places, unfortunately the code was written to order for someone else. They have to decide in what form to release it...
For now, I can say it can be fixed, on every slider based device, Uni, Wizard, XV6700, Hermes ... It's not a registry based solution tho, if it was I'd love to tell you guys about it.
V
If you have one available for the Hermes (same as SPV M3100 I think) please let me know.
CL said:
So is there a fix for the screen rotation problem on Tomtom 6?
Click to expand...
Click to collapse
What do you mean. problem? The rotation feature was removed by TomTom "based on end user requests". Like so many other things that were present in the older version. Anyone still remembers the permanent avoids of TTN2 and 3 ?
I have my uni in a car holder, but I can twist my holder (brodit)
so I have it in landscape for msn/email, and portrait when i need to navigate.
btw TT6 is much much slower then TT5 on my uni
in landscape it's unusable, in portrait it seems even slower then tt5
Hi all,
does anybody know if there's a way to quickly change between landscape & portrait on the Trinity - or to set up a hot key to do so?
Thanks.
Of course there is. For instance, install SPB Pocket Plus and assign Rotate Screen Left or Rotate Screen Right to one of Trinity's buttons. There are actually many applications that offer screen rotating function.
You don't need any tool. Just use the normal WM5 settings to assign new functions to key 1 (voice recording) and key 2 (camera). One of the selections is "<Rotate screen>". The assigning of "<Rotate screen>" to the "voice recording" key was one of first things I changed in the Trinity settings.
What about on the screen
...thanks for that, but I kind of like those keys for the camera and sound recording. Is there any way you can put a shortcut on the Today screen to perform the same task?
In Today screen there is by default an icon to rotate the screen!
Icon?
I can't find a default icon on the Today screen for changing screen orientation - can you tell me what it looks like and where it should be?
Thanks
tjw2007 said:
I can't find a default icon on the Today screen for changing screen orientation - can you tell me what it looks like and where it should be?
Click to expand...
Click to collapse
This is part of the HTC-plugin. It should be installed on your device if you have an unbranded Trinity by HTC. It includes a battery indicator and icons for the light settings, the comm manager and the rotation. Those four icons should be in a line somewhere on your today screen.
Exactly.
Starting from left to right I have:
Battery status - Screen orientation - Comm. Manager - Light adjustment
In particular the screen orientation icon is the one with the picture of the P3600 and the stylus pointing its screen
ah!..found it - i could have sworn the screen orientation icon was for something else. Thanks to all.
Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
I don´t know. Sorry
i think he is using the dpad function of unlocking s2u2. i think your gonna end up with issues with the looks though. just wasnt meant for a smartphone squarish screen.
Wow, everywhere I post this someone without knowledge of S2U2's capabilities tells me smartphones don't have touchscreens. Thanks for the news flash
Yes, ajk511 is right, mostly. The Q has a 320x240 screen, not square, but even if it did, the S2U2 notes say it supports square screens and smartphones. I'm looking for input from anyone who's used S2U2 with a Q or similar device and experienced or resolved this problem.
I can't tell what S2U2 will do on a Q, but it works perfectly on a Smartphone emulator, except the CallerID part. Could you provide a screenshot of what you've done? I guess you may have to prepare a separate set of wallpapers for your Q as QVGA device needs a 240x320 portrait wallpaper while your Q is 320x240.
Can't speak for the Q, but on my wife's HTC Excalibur it works flawless. I did however make a custom 320 wide by 240 high wallpaper that is running in portrait(!) mode as far as I remember. Slider is visible and working fine with the DPAD.
I can confirm that s2u2 works without problems on my Samsung i600, after I had set NoPowerSuspend to 1 (before that if my phone screeen has been turned off, it stayed off and I can unlock device only after pluging headset wire into the slot), and CallerID to 0.
Now I have one question: how can I set s2u2 to lock keypad on homescreen only?
Sorry for my English
This work in a Smartphone HTC S620?
I had a problem with my samsung i320 (landscape 320x240). S2U2 and settings start in the wrong orientation. unlock is working with DPAD, but it's impossible to use settings
Thanks for your answers
Treo 500v has the same problem.
I started with 1.01 and then 1.05, 1.22b, 1.30 and 1.32.
Always the same problem
BoZ
I guess S2U should have its own help forum. Anyways The problem I am having is that when I turn the back light off and turn it back on S2U pops up just fine but I also get an error notification "Cannot execute \Storage Card\Program Files\XMT_OnPowerOn.exe" Does anyone know if this is a S2U problem or something else?
Running on Q9
I've been running s2u2 on a Motorola Q9c for about 3 weeks now with minimal problems. I love it! I'm just trying to learn my way around some of the power management options, and figure out how to change the size/date of the date. So far so good though, I'm very impressed.
Hi, which s2u2 version are u using?
thanks
newest version works fine on HTC Ozone. Trick is you need to use mydialer to change config, its eazier that way.
I actually used S2U2 with a Pantech Matrix Pro and it worked fine. The only problem is when the screen dims, then goes to the lockscreen, then the screen shuts off, the phone shuts down immediately! Also I could not figure out how to access the settings because it was meant for a PPC. Any ideas?
Try to edit settings via registry values in HKCU\Software\A_C\S2U2
try adjusting your backlight settings, to time out longer.
UltraMagnus said:
Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
Click to expand...
Click to collapse
It works just fine on my Q..on screen shows the battery charging....i'm using S2U2 v2.41..because it's difficult to editing the s2u2 setting ( b'cause Q is not touch screen.. ) so i use my mobiler apps to control it through PC...
Ray_jai said:
Hi, which s2u2 version are u using?
thanks
Click to expand...
Click to collapse
Try this latest version 2.43 of S2U2, it really works fine on Windows Mobile Smartphone 320x240, specially for Motorola Q CDMA or Samsung GT-C6625 Valencia but settings mode cannot be access, so you should try to edit settings manually via registry values in HKCU\Software\A_C\S2U2 and goodluck...
Inspired by http://forum.xda-developers.com/showthread.php?t=471295
Instruction:
Make sure that that TF3D installed and works like it should in portrait mode
Get latest MortScript from here. Tested with latest beta (preferable).
Install MortScript on your X1
Unzip attached script and put in your \Windows\StartUp (or localized name) folder on your X1
Softreset (or run script manually)
Report
The basic idea is VERY simple - just prevent screen rotation while TF3D is active and allow landscape for any other apps.
Script dynamically switches between landscape and portrait modes if keyboard is unfolded and device is switched from TF3D to “normal” app or vice versa.
If you are using standalone SPb Mobile Shell (not as a panel) this script prevent show "SPb Now screen" on wakeup if TF3D is onscreen.
Now with real prevention of landscape for TF3D.
Drawback - camera button remapped to right softkey while TF3D is on screen. Looking for solution.
Version History:
v1.0
+ Initial Version
v1.1
+ Added ability to autodisable "SPb Now on wakeup" while TF3D on screen
v1.3
+ Real prevention of landscape for TF3D. Camera button not functional while TF3D is on screen.
v1.4
+ While TF3D is on screen right softkey button works as camera button
+ If TF3D isn't on screen right softkey buttion works as right softkey (hardcoded)
Please include in report TF3D version (source) and type of TF3D use (Today/Panel).
I like simple and effective solutions, kudos
MapleDouglas said:
I like simple and effective solutions, kudos
Click to expand...
Click to collapse
OK, so test it.
And don't forget to report.
Just developed new script for people who use SPb Mobile Shell not as a panel.
I’m personally prefer use SPb Mobile Shell in that way because I like fullscreen look and feel of Mobile Shell (and Mobile Shell Panel doesn’t support Russian).
This script include functionality of TF3D landscape workaround plus prevent SPb “Now Screen” to be shown in case that TF3D active.
If you don’t have SPb Mobile Shell you can use this script as well, it will function only as TF3D landscape workaround in that case.
Installation instruction in first post.
Just tried it. It works. When the phone switch to landscape mode when you slide out the keyboard, it switches it back to portrait mode.
Although i really wished that this script stops TF3d to switch to landscape mode entirely. so we dont see that ugly ass half pixelated screen at all
rotsu said:
Just tried it. It works. When the phone switch to landscape mode when you slide out the keyboard, it switches it back to portrait mode.
Although i really wished that this script stops TF3d to switch to landscape mode entirely. so we dont see that ugly ass half pixelated screen at all
Click to expand...
Click to collapse
It's just my first mobile script.
I'll try to find out is total prevention possible becase I don't like ugly screen on nice device too.
But anyway it's better to have ugly screen for 1-2 seconds than ugly screen all the time.
Just developed new solution with real prevention of landscape for TF3D.
Drawback that camera button not works while TF3D on screen. Looking for solution.
New version in first post.
1.3 works fine, camera has no issues.
using Itje 2.2 tf3d as today plug In
1.3 works, but it disabled the camera button as stated
Using UK generic ROM, tf3d as panel. fix it fix fix fix fix!
Thanks btw!
fards said:
1.3 works fine, camera has no issues.
using Itje 2.2 tf3d as today plug In
Click to expand...
Click to collapse
Just wondering how you got yours to work? I have the same ROM as yours, but nothing works on my phone...won't go into portrait mode at all
DoubleVision19 said:
Just wondering how you got yours to work? I have the same ROM as yours, but nothing works on my phone...won't go into portrait mode at all
Click to expand...
Click to collapse
did you follow the instructions exactly? do you get any error messages?
i originally used the version of this with the spb fix in it (for no reason than I could) then replaced the 1.3 file. Can't see how that would make any difference.
I am using the b10 of mortscript btw, but don't think that makes any difference.
Karlson nice script, I might try some different plugins, if I can get the old BIG VGA home plugin working from the x7500 that would look great in landscape. I've never been that impressed by this action screen..
Think about it I might just try some of my old Rltoday screens.
Very nice fix
my TF3D screen doesn't rotate anymore Thank you
DoubleVision19 said:
Just wondering how you got yours to work? I have the same ROM as yours, but nothing works on my phone...won't go into portrait mode at all
Click to expand...
Click to collapse
Which version of TF3D and MortScript?
fards said:
did you follow the instructions exactly? do you get any error messages?
i originally used the version of this with the spb fix in it (for no reason than I could) then replaced the 1.3 file. Can't see how that would make any difference.
I am using the b10 of mortscript btw, but don't think that makes any difference.
Karlson nice script, I might try some different plugins, if I can get the old BIG VGA home plugin working from the x7500 that would look great in landscape. I've never been that impressed by this action screen..
Think about it I might just try some of my old Rltoday screens.
Click to expand...
Click to collapse
Share your ideas - I can make more scripts for any automation.
Just published new version.
Camera button remaped to right softkey.
If TF3D isn't active right softkey works as default (hardcoded).
Please post any suggestion especially if you need different right softkey functionality.
Karlson2k said:
Just published new version.
Camera button remaped to right softkey.
If TF3D isn't active right softkey works as default (hardcoded).
Please post any suggestion especially if you need different right softkey functionality.
Click to expand...
Click to collapse
Well, it would be nice if you could wrap a small UI around your app. Perhaps a landscape disable "toggle" and right softkey remap toggle as well? I'm going to try it again, see what it does now.
Karlson2k said:
Which version of TF3D and MortScript?
Click to expand...
Click to collapse
for TF3D, I have Version 3.0 (Build 32076) <-- This one came with itje's Touch-IT Xperience ROM v.2.2
for MortScript, I'm using the latest one from the link you provided
using V1.4 looks better
just a little problem though, when i slide out my keyboard it kick back to portrait then came back to landscape --> improvement, it stay in landscape, last try it will always kick back to portrait.
when i slide in, it close the cmEXlandscape perfectly
GREAT JOB!
THANKS!!
Cheers
Has anyone tried this with TF3D as a panel?
Also, what happens when I slide open the keyboard, does it rotate back to portrait or does it show the tabs, but as shortcuts on the screen?
Karlson2k said:
Please post any suggestion especially if you need different right softkey functionality.
Click to expand...
Click to collapse
Simply irresistible offer
I'd realy like to use my right softkey to start recording voice notes (single press to star recording, not "record while holding")
Hey guys,
I installed Touchflo on my Xperia. Works very well! But i have a problem.
The right key keeps remapping it's self back to "Today" after i start Touchflo.
I want this button to turn the display arround, but everytime i set it up, it remapps itself again after starting Touchflo.
I there a solution for this problem?
settings -> button -> map as whatever you want
what do you mean with "turn the display arround"? landscape?
In short, no solution if you have TF3D installed.
Install AWBPlus.
@guap
yes, i mean landscape.
@paroxsym
are your sure? is this a known problem?
You could start TouchFlo via MortScript.
Last lines should be
Sleep(10000)
RegWriteDWord("HKLM","Software\Microsoft\Shell\Keys\40C3","Flags",14)
and the Button gets remapped. I've got this in my Autostart folder.
Sounds complicated ^^
I hope this problem will be fixed in the coming Manila 2 landscape.
you gotta search for hd-tweak...it´s somwhere in the blackstone forum...i got it on my xperia, and it just works find.
softreset included
there´s the link: http://forum.xda-developers.com/showthread.php?t=452505
In the Deveopment/Hacking forum, you can find a fix from me which works without further tweaking tools
I hope the simple trick will be used by the rom cooks in further ROMs, at least Hammamed told me he will use it