Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
I don´t know. Sorry
i think he is using the dpad function of unlocking s2u2. i think your gonna end up with issues with the looks though. just wasnt meant for a smartphone squarish screen.
Wow, everywhere I post this someone without knowledge of S2U2's capabilities tells me smartphones don't have touchscreens. Thanks for the news flash
Yes, ajk511 is right, mostly. The Q has a 320x240 screen, not square, but even if it did, the S2U2 notes say it supports square screens and smartphones. I'm looking for input from anyone who's used S2U2 with a Q or similar device and experienced or resolved this problem.
I can't tell what S2U2 will do on a Q, but it works perfectly on a Smartphone emulator, except the CallerID part. Could you provide a screenshot of what you've done? I guess you may have to prepare a separate set of wallpapers for your Q as QVGA device needs a 240x320 portrait wallpaper while your Q is 320x240.
Can't speak for the Q, but on my wife's HTC Excalibur it works flawless. I did however make a custom 320 wide by 240 high wallpaper that is running in portrait(!) mode as far as I remember. Slider is visible and working fine with the DPAD.
I can confirm that s2u2 works without problems on my Samsung i600, after I had set NoPowerSuspend to 1 (before that if my phone screeen has been turned off, it stayed off and I can unlock device only after pluging headset wire into the slot), and CallerID to 0.
Now I have one question: how can I set s2u2 to lock keypad on homescreen only?
Sorry for my English
This work in a Smartphone HTC S620?
I had a problem with my samsung i320 (landscape 320x240). S2U2 and settings start in the wrong orientation. unlock is working with DPAD, but it's impossible to use settings
Thanks for your answers
Treo 500v has the same problem.
I started with 1.01 and then 1.05, 1.22b, 1.30 and 1.32.
Always the same problem
BoZ
I guess S2U should have its own help forum. Anyways The problem I am having is that when I turn the back light off and turn it back on S2U pops up just fine but I also get an error notification "Cannot execute \Storage Card\Program Files\XMT_OnPowerOn.exe" Does anyone know if this is a S2U problem or something else?
Running on Q9
I've been running s2u2 on a Motorola Q9c for about 3 weeks now with minimal problems. I love it! I'm just trying to learn my way around some of the power management options, and figure out how to change the size/date of the date. So far so good though, I'm very impressed.
Hi, which s2u2 version are u using?
thanks
newest version works fine on HTC Ozone. Trick is you need to use mydialer to change config, its eazier that way.
I actually used S2U2 with a Pantech Matrix Pro and it worked fine. The only problem is when the screen dims, then goes to the lockscreen, then the screen shuts off, the phone shuts down immediately! Also I could not figure out how to access the settings because it was meant for a PPC. Any ideas?
Try to edit settings via registry values in HKCU\Software\A_C\S2U2
try adjusting your backlight settings, to time out longer.
UltraMagnus said:
Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
Click to expand...
Click to collapse
It works just fine on my Q..on screen shows the battery charging....i'm using S2U2 v2.41..because it's difficult to editing the s2u2 setting ( b'cause Q is not touch screen.. ) so i use my mobiler apps to control it through PC...
Ray_jai said:
Hi, which s2u2 version are u using?
thanks
Click to expand...
Click to collapse
Try this latest version 2.43 of S2U2, it really works fine on Windows Mobile Smartphone 320x240, specially for Motorola Q CDMA or Samsung GT-C6625 Valencia but settings mode cannot be access, so you should try to edit settings manually via registry values in HKCU\Software\A_C\S2U2 and goodluck...
Related
Curious as to what this app does and how well it works. Anyone have a screenshot of this running.
Thanks
JM
I use TrueVGA and it works well. You can see all Icons only the CommManager is blurred.
Please attend the the correct order of installation.
1. SdkCerts.cab
2. MvRTrueVGA_v1.3.cab
Install description
Pictures
Works Great
Super !!
Thanks
Tidde
Perfect thank you very much.
i have my athena with traditional chinese runnig on ozvga as well!
but there is no way to activate the input pane on the the screen...
wondering who has the resolution!
thanks!
bigsmart said:
I use TrueVGA...
Click to expand...
Click to collapse
Can I ask why you use TrueVGA (and not OzVGA)?
I've not tried either on the Ameo, and before I go for one, I was curious if anyone who has tried both knew of a reason to go for one instead of the other...
Ta muchly
D
There are some problems with OzVga. For example, few Icons are missing.
Greets
I tried installing the files above, as OzVGA had always been somewhat a mixed bag of giddiness and disappointment for me.
In the end, I've had to uninstall TrueVGA as well, mainly because my signal meters and start menu icon etc etc would not show. I installed in the correct order and yet still nothing.
As a seasoned XDA-er, is there a trick I'm unwittingly missing?
Cheers
Ant
didnt lose my signal icon, but the one telling me if its G or 3G, connected to HSDPA etc seems to come and go now, rather than always be there as expected.
other than that, and some of the settings pages being messed up, works nicely.
Yeah, for my case, my data connection icon always display itself as trying to connect to a WiFi network even though that's not true. Some of the settings screens are badly messed up, as you have mentioned.
I have another query: does the Side Display works in true VGA mode?
I tried to attach the keyboard to the screen but nothing comes up.
The Keyboard did not work. I use the Resco Keyboard it is much better than the original.
Oh, I wasn't referring to the software keyboard input. I mean, when you attached the hardware keyboard onto the screen of the Athena, there will be one strip of visible space of the screen that shows some status like time, messages etc.
It works in normal VGA mode, but I cannot get the display in true VGA mode.
chrisoyh said:
Oh, I wasn't referring to the software keyboard input. I mean, when you attached the hardware keyboard onto the screen of the Athena, there will be one strip of visible space of the screen that shows some status like time, messages etc.
It works in normal VGA mode, but I cannot get the display in true VGA mode.
Click to expand...
Click to collapse
The "one strip of visible space of the screen" works ok in a true VGA mode in mine device. You should not attach but close by the keyboard the screen. Sometimes it doesn't show the white strip, but try to move a little bit the keyboard, because it reacts to by sencors to magnets on the keyboard.
Yeah, you're right. I need to move the keyboard around until the display comes on. Thanks!
bigsmart said:
I use TrueVGA and it works well. You can see all Icons only the CommManager is blurred.
Please attend the the correct order of installation.
1. SdkCerts.cab
2. MvRTrueVGA_v1.3.cab
Install description
Pictures
Click to expand...
Click to collapse
My Comm Manager, phone pad, Connection icon (E (edge), etc) and password screen don't display properly. Did you have these issues and if so, how did you fix them?
Also, what did you use to create your theme? I want to create a new theme for the newer resolution.
Thanks in advance.
When I last used real VGA mode it was on my Universal.. Again there were icon problems, but on this very forum there were VGAFILES packs that had file to put in the windows directory that replaced the missing icons.
I cant remember the exact details, but I suggest people having problems look through the Universal forum for VGA info as there was a LOT there.
Hope this helps.
I have all about VGA screen's file for my universal. But since i still waiting for my athena, i can't decided wich file is needed. Just icon or something?
Is anyone using SPB Mobile Shell with any of the VGA apps? If I have it loaded on the today screen, the pda locks up when it tries to dispay the Today screen. The only fix thus far is to remove it from the Today screen.
Thanks
charlie.s said:
Is anyone using SPB Mobile Shell with any of the VGA apps? If I have it loaded on the today screen, the pda locks up when it tries to dispay the Today screen. The only fix thus far is to remove it from the Today screen.
Thanks
Click to expand...
Click to collapse
yes u are right the pda locks when using SPB Mobile shell. i have a question about the keyboard how to use it because in true VGA mode i see NO keyboard its white space with no letters and also can someone confirm if resco keyboard can be used in trueVGA mode?
I´am using the Resco keyboard and it works fine.
Hi, after installing MarkVan's true VGA package in this link
http://www.jaml.com/MvRTrueVGA/, I have identified the following issues that I'm still unable to solved. I thought that a special thread to address specifically problems after this installation might be helpful.
I'll start by first listing what I've identified as problems:
1) setting>system>backlight screen could not be used. This problem is serious, as somehow by default, the backlight is switched off after just a few seconds in true VGA mode. Even if I try, using QVGA mode to change it such that backlight will not be switched off, as soon as I toggle back to the true VGA mode, it is switched off after 10 seconds again.
2)setting>system>clear storage screen is garbed. It is difficult to make up what the input instruction are in performing hard reset. Not critical but would be nice if the screen could be fixed.
3)setting>system>power screen is garbed due to wrong sized icon. This is minor problem.
4) Setting>system>TV out screen title has the wrong font. Minor problem
5) Setting>system>VueFLO screen title has wrong sized font. Minor problem
6)setting>connection>comm manager screen is garbed. Not being able to control the connection could be quite a problem. In this application, the Settins>Wireless LAN screen is also garbed. I can solve this problem by installing Commmgrpro to give exactly the same functionality, however. Therefore, I would say this is not really an issue. But would be nice if someone already know how to solve this.
7)setting>connection>wireless Lan heading and the screen is garbed. The screen could not be used. The font sizes within all tabs are of wrong sizes. Again, CommmgrPro solves this problem by replacing this.
8)setting>personal>phone (pin2 and "more" tab) are garbed
9) Phone. Although I've applied VJbigpohne, I'm somehow unable to get exactly the same effect as what vj has in his screen shot. His screen shot showed that the numbers are nicely sitting in the centre of the phone buttons and the phone stretches all the way to the bottom of the screen. Mine looks different and ugly. The numbers are sitting to the extreme right edge of the buttons and there is a blank space at the bottom of the screen. I would like to fix this to look good
10) Spb GPRS monitor plugin has wrong sized font. As a result, I cannot see the download speed of my connection. The main application itself, which shows in chart form the usage has no problem. I have been looking for another product that works fully under VGA mode to replace the Spb GPRS monitor, but none of them gives me the download speed (They only shows the total MB downloaded, but not the Kbps info)
11)Pocket music. In landscape mode the option and playlist buttons are missing. In portrait mode there is no such problem. edit: this is not the vga problem,as it also behaves the same way I'm qvga mode.
12) Software Input Panel, or the soft keyboards, are soooo small, that they are unuseable. The standard big keyboard was nice as I can use my finger to type it without covering up the screen. If it is not possible to use the original soft keyboard, then I would like to use the HiKeyboard, because this keyboard has the ability to also do the job the the Spb full keyboard, as well as provide a calculator keypad. I like Hikeyboard the best, among all the ones I've evaluated. However, with MvrTrueVGA, I'd be forced to use only the resco keyboard. I prefer not to pay for resco keyboard, and to pay for Spb full keyboard, when I can just pay for Hikeyboard. I also much prefer HiKeyboard over Spb Full keyboard because it has the option to reveal what you have typed without exiting the full keyboard. Coming to the worst I'd get the Resco Keyboard although it is not as good as the Hikeyboard, so I supposed this is not the most seriuos matter.
13) Quick GPS program does not display correctly, and at the bottom of the screen display does not reach all the way to the edge of the screen. It looks ugly. Also, you can't see vital date and validity information on this screen.
14) Pocket Mechanics - The icons are too big and the characters are too small. It look real ugly as compared to the QVGA appearance.
15) My VOIP client SJPhone does not stretch all the way to the bottom. In landscape mode, the bottom part of the applications are cut off, while it leaves a big hole on the right. EDIT: qvga display landscape mode is also faulty I'm the same way.
16) In QVGA mode, my H and G indicator for data download has disappeared under true VGA mode. In place of the H (which means HSDPA connection is available), it shows the "connection is active" indicator instead.
In place of "HSDPA is in use" indicator, it shows just the signal strength without indicating whether I'm on a UMTS or HSDPA connection.
There might be more problems with other applications which I have not listed, and if you know of any, please add them in as a repository for all of us to look at.
It is possible that some of you have got solutions to the above problems.
If so, let's post the solution here, quoting the problem number if you can.
Thanks guys and gals
I'm not sure (and I'm happy if I'm wrong) but I think the best answer is:
"Yeah, but what'cha gonna do..."
WM5 is not intended to be used in full 640x480 mode, roumors will have it that WM6 is. So let's keep our hopes up.
But you obviously have more problems than me. Most screens are good and readable for me, except the phone (before applying VJBigPhone), Clear Storage, QuickGPS and the G/E/U/H icons + signal level. Of all these, the GEUH and signal level indicator is the only thing I "need" fixed (I can live with the rest).
Moskus said:
I'm not sure (and I'm happy if I'm wrong) but I think the best answer is:
"Yeah, but what'cha gonna do..."
WM5 is not intended to be used in full 640x480 mode, roumors will have it that WM6 is. So let's keep our hopes up.
But you obviously have more problems than me. Most screens are good and readable for me, except the phone (before applying VJBigPhone), Clear Storage, QuickGPS and the G/E/U/H icons + signal level. Of all these, the GEUH and signal level indicator is the only thing I "need" fixed (I can live with the rest).
Click to expand...
Click to collapse
Hi Moskus,
Thanks for the reply.
May I get more specific about what you're having?
a) You mean your soft input panel (on screen keyboard) is not too tiny? Are you using Resco keyboard to overcome the problem? Are you able to use the standard with no problem?
b) Your backlight adjustment screen is okay? Using the standard or replacement which consumes additional memory?
c) What about yout comm manger screen? Are you still using the standard or using a replacement which takes up more memory?
d) Your phone does not leave a hole at the bottom after VJbigpohne is applied? The characters on the keys are centered or also to the edge? I saw VJ555's screen shot and its as beautiful as the standard. Mine is aweful looking, although it works. Are you having the perfect looking screen just like VJ555's or are you putting up with the less than perfect looking screen?
e) Do you use SPbGPRS monitor? When you click the task bar icon, does the pop up screen display correctly? Or are you not using this?
f) Your quick GPS is displaying okay?
g) What is your ROM version?
h) What it your os language?
Thank you for sharing these information.
eaglesteve said:
Hi Moskus,
Thanks for the reply.
May I get more specific about what you're having?
a) You mean your soft input panel (on screen keyboard) is not too tiny? Are you using Resco keyboard to overcome the problem? Are you able to use the standard with no problem?
b) Your backlight adjustment screen is okay? Using the standard or replacement which consumes additional memory?
c) What about yout comm manger screen? Are you still using the standard or using a replacement which takes up more memory?
d) Your phone does not leave a hole at the bottom after VJbigpohne is applied? The characters on the keys are centered or also to the edge? I saw VJ555's screen shot and its as beautiful as the standard. Mine is aweful looking, although it works. Are you having the perfect looking screen just like VJ555's or are you putting up with the less than perfect looking screen?
e) Do you use SPbGPRS monitor? When you click the task bar icon, does the pop up screen display correctly? Or are you not using this?
f) Your quick GPS is displaying okay?
g) What is your ROM version?
h) What it your os language?
Thank you for sharing these information.
Click to expand...
Click to collapse
I think we have different "standards" for what the problems are.
a. I'm using the Resco keyboard, since the original is not showing up (as described in many other threads here and at the Qtek 9000 forum)
b. The backlight adjustment screen is OK.
c. The Comm Manager is "squished" but usable. I would prefer it if the icons were bigger, but I can use without any serious problems.
d. The phone does leave a gap at the bottom with the last displayed picture, and it would be nice if it didn't. But I can use the phone without problems.
e. I haven't tried SPG GPRS Monitor on this device. However, I do not have problems with the "home icon" that Magic Button is displaying in "Task Bar mode" and I can press/click on the other status indicators.
f. The QuickGPS application is also "squished" together as the Comm Manager is. But I can read when I last updated and I can find the "Update now" button without problems. I am able to use the program, but it could look nicer.
g. My ROM version is 1.25.409.2 (03/21/07).
h. My language is (not supprisingly) norwegian.
So TrueVGA is not perfect, and it probably never will be (until WM6 I hope). But I think the advantages (insert pun here) outweights the disadvantages. Using my Advantage without TrueVGA is not an option for me anymore.
I agree with you that it is not an option for many people. I guess I need to lower my expectation a little. It was just that after seeing the beautiful screen, the initial euphoria was somewhat dampened by the ugly screens for some places and for some program.
I'm using VGA mode most of the time, and use the largest font in the setting>system>screen>font selection due to the strain on my eye if I use other fonts.
One of the key problems that I had using trueVGA initially was that because I could not control the backlight setting, everytime I toggle to VGA mode, it revert to turning backlight off in 10 seconds. There is absolute no way to change it to stay on for longer time. So it was very frustration to look at an extremely dimmed screen which is totally unreadable outdoor. This problem seems to have gone away after two recent hard resets. With that problem gone, I guess I can live with the other imperfection
I had a simular problem with the backlight control --- I have installed "Todaywarrior" and I can control the backlight from the today screen now while in VGA mode.
leblancrs said:
I had a simular problem with the backlight control --- I have installed "Todaywarrior" and I can control the backlight from the today screen now while in VGA mode.
Click to expand...
Click to collapse
Hi leblancrs,
Thanks for this info. What can today warrior do? Does it let you specify the elapsed time before backlight is off?
what else can it do?
You have the website link?
Spb pocket plus can adjust backlight, but not the time elapsed setting, I think.
eaglesteve said:
Hi leblancrs,
Thanks for this info. What can today warrior do? Does it let you specify the elapsed time before backlight is off?
what else can it do?
You have the website link?
Spb pocket plus can adjust backlight, but not the time elapsed setting, I think.
Click to expand...
Click to collapse
Google is you're friend
http://personales.ya.com/beemer/todaywarrior1.htm
leblancrs said:
I had a simular problem with the backlight control --- I have installed "Todaywarrior" and I can control the backlight from the today screen now while in VGA mode.
Click to expand...
Click to collapse
Hi Leblancrs,
Downloaded that and tried it. Unfortunatley, this actually is not doing what I was talking about. While it provides a slider to control the backlight (which I can already do in many different ways without problem in VGA mode), it does not appear to have a facility to specify how many minutes must elapse before backlight is automatically switched off (battery and main would have a different setting of course). Or am I missing out something?
Well ive ordered one of these devices on the basis that Windows Mobile 6 offers VGA. Im pretty confident that is official not just hopeful but Microsoft have been known to dissapoint before.
If thats the case then I guess this device will be up on ebay pretty quick. Im not going through all the stuffing around for VGA like what you're all experiencing and like what I went through for Universal VGA. Despite the fact that converting to VGA seems to be a much easier process now.
Hhhmm
I have installed MW6 on my device and no native vga support I am afraid.
Oh well.
Those screens are way too small with VGA , like being blind!
spacecat said:
Those screens are way too small with VGA , like being blind!
Click to expand...
Click to collapse
No, it's not. It's like seing alot!
It's absolutely excellent!
Moskus said:
No, it's not. It's like seing alot!
It's absolutely excellent!
Click to expand...
Click to collapse
I used truevga for a while, although I didn't experience quite the same amount of problems as Eaglesteve I did have distorted comms and dialpad screens and was unable to change the brightness. There were a few other niggles but these were the prevalent one.
After getting over the novelty of tiny icons and lots of space on the today screen I eventually removed the program. Now IE and Opera support high resolution it seems like even less reason to use it.
There seems to be no REAL advantage to its use other than to view lots of icons at once.
Taking all the problems into account I can live with chunky icons - they're hardly offensive to the eyes. and I suppose didn't pay good money for a 5" screen to squint and have to get my pen out evey time I want to type something or navigate through menus.
Much as Microsoft DO neglect certain applications and functionlity with windows mobile I think that they have made a conscious decision not to use VGA and this decision would have been made for a reason, though we may never know it.
I'll install MVRTruevga again and give it another try now and see if my opinion alters......
leoni1980 said:
I used truevga for a while, although I didn't experience quite the same amount of problems as Eaglesteve I did have distorted comms and dialpad screens and was unable to change the brightness. There were a few other niggles but these were the prevalent one.
After getting over the novelty of tiny icons and lots of space on the today screen I eventually removed the program. Now IE and Opera support high resolution it seems like even less reason to use it.
There seems to be no REAL advantage to its use other than to view lots of icons at once.
Taking all the problems into account I can live with chunky icons - they're hardly offensive to the eyes. and I suppose didn't pay good money for a 5" screen to squint and have to get my pen out evey time I want to type something or navigate through menus.
Much as Microsoft DO neglect certain applications and functionlity with windows mobile I think that they have made a conscious decision not to use VGA and this decision would have been made for a reason, though we may never know it.
I'll install MVRTruevga again and give it another try now and see if my opinion alters......
Click to expand...
Click to collapse
There are also a number of apps that look pretty strange with MvRTrueVGA. But I'll put up with some cosmetic defects for functionality. I just love being able to see a couple days of appointments, device status, weather info... plus an ilauncher strip, all on my today screen!
wgary said:
There are also a number of apps that look pretty strange with MvRTrueVGA. But I'll put up with some cosmetic defects for functionality. I just love being able to see a couple days of appointments, device status, weather info... plus an ilauncher strip, all on my today screen!
Click to expand...
Click to collapse
I had the same excitement myself initially, though I found it difficult to press these icons with my fat fingers and inevitably decided that it was easier to just navigate to the program folder and leave essential apps for the today screen. I hope a new VGA solution is developed soon which makes the icons a bit bigger and throws up less garbled screens and program glitches.
In the interim does anyone have link for how to alter the sidebar/ softkey size so they look like thse in MVRtruevga? my internet is very slow on my phone today so searching is proving very frustrating.
Moskus said:
No, it's not. It's like seing alot!
It's absolutely excellent!
Click to expand...
Click to collapse
your opinion dude , in mine its WAY too small, its not like you need to see so much at once . Who needs the eyestrain
leoni1980 said:
There seems to be no REAL advantage to its use other than to view lots of icons at once.
Click to expand...
Click to collapse
Have you ever tried editing an Excel-spreadsheet or Word-document using MrVTrueVga? It's a must.
spacecat said:
your opinion dude , in mine its WAY too small, its not like you need to see so much at once . Who needs the eyestrain
Click to expand...
Click to collapse
Sure it's my opinion, I was just commenting yours...
(To me) There is no eyestrain, so I don't "see" ( ) the problem...
Moskus said:
Have you ever tried editing an Excel-spreadsheet or Word-document using MrVTrueVga? It's a must.
Click to expand...
Click to collapse
It is certainly easier to edit word and excel documents in VGA mode - I'm surprised MS didn't create a highres option for their office apps like the one in PIE.
You can change the default font size via the system>screen menu instead of switching to VGA for a slight improvement.
Hi guys, as soon as we get some more money the 2nd athena should be arriving to me, so in light of this i'd like to see what your feature requests are for the rom i will be building
Everything will be considered, but no guaruantees
Dont forget to
or this cant happen
suggestions...
Midget_1990 said:
Hi guys, as soon as we get some more money the 2nd athena should be arriving to me, so in light of this i'd like to see what your feature requests are for the rom i will be building
Everything will be considered, but no guaruantees
Click to expand...
Click to collapse
- Fix all trueVGA graphical problems. Icons, screens, etc. I would like to run in trueVGA full time without having these types of issues.
- Unlock Extended ROM so people can put their own apps in for the next hard reset. ;-)
- Put the "Tray Display" utility into the ROM so people can show or hide their trays. File name "traydisplayinstall_196.CAB".
- Setup the "BlueTooth Tray Status & BT Audio Util" on the ROM. File name "btIO-0.5.CAB".
- Maybe the functionality to add/remove program icons from the tray without having to modify the registry? ;-)
- All black VGA theme. Similar to the default WM6 theme but all black.
- If possible, maybe an updated version of Pirazu so we can control a mouse cursor with the joystick?
- Alternative to BlueMouse so we can use a BT mouse cursor on the device. BlueMouse is nice but it costs.
Make it work like "Touch" may be the looks....
vueFlo for everything.
jab said:
vueFlo for everything.
Click to expand...
Click to collapse
Yes...how did I forget this. For sure trying to tie the vueFlo into other apps and possibly games, etc.
ltxda said:
- Fix all trueVGA graphical problems. Icons, screens, etc. I would like to run in trueVGA full time without having these types of issues.
- Unlock Extended ROM so people can put their own apps in for the next hard reset. ;-)
- Put the "Tray Display" utility into the ROM so people can show or hide their trays. File name "traydisplayinstall_196.CAB".
- Setup the "BlueTooth Tray Status & BT Audio Util" on the ROM. File name "btIO-0.5.CAB".
- Maybe the functionality to add/remove program icons from the tray without having to modify the registry? ;-)
Click to expand...
Click to collapse
For me, these first five would be a darn good start.
- With #1 - Usable dialer in TrueVGA would be #1 on my list.
Couple more (may already be fixed in WM6, but have yet to plunge):
- WiFi On/Off is flaky unless you actually go into the Comm Manager (e.g., PhoneAlarm and other programs are not effective)
- I still have problems doing multiple mappings to Win and OK buttons. AEBPlus does this kinda, but then other buttons get mucked up. Given few number of buttons, this is really limiting.
Wish list:
- USB-powered Beer Tap. I know the low-power port might be an issue, but I'm sure this should be doable. Integration with MS VC would also be great, "Computer, pour beer." (All I can say is, it's been a long day!)
Actually I should have just put mapping of the vueFlo API. That should open up the rest of the developers to building cool widgets also.
VueFlo for rotate screen like iPhone
bebox said:
VueFlo for rotate screen like iPhone
Click to expand...
Click to collapse
That would be cool! I'm in favour!
i think rotate screen would a great feature when you see a photo .
widcomm bluetooth stack =) for dun
also a way to use another windows phone as a bt headset like the touch (if possible)
Solid & Fast ROM compatible with previous backups
Damn guys...you're not asking for much are you...hehe. Actually I quite like the sound of the all Black VGA ROM with Touch like interface.
But hey, I'll settle for a an all black super reliable and damn fast ROM in vanilla favour.
You guys have made some great suggestions, that I can't argue with. All I can say..is I'd love a ROM that I can use my Spb Backup files with...without corrupting any software, so when you release version 0.1, 0.2 etc...it will still be compatible with my backup files, making the switching of ROM's a quick thing to do.
I hate my phone being out of action. and having to re-install everything again.
I third the black vga theme. Also in vga mode is it possible to make the start bar a little bigger so it is more finger friendly. Something the size of when it it is in qvga mode would be great. Also when you push the start bar and the drop down list pops up it would be great if that was larger with larger text. Also at least for me in vga mode in wm6 none of the 3g, signal strength icons show up in the start bar only the time does.
The only thing i'm against is the vueFlo. Except the part about using vueFlo to sense when to rotate the screen.
c0mput0r said:
I third the black vga theme. Also in vga mode is it possible to make the start bar a little bigger so it is more finger friendly. Something the size of when it it is in qvga mode would be great. Also when you push the start bar and the drop down list pops up it would be great if that was larger with larger text. Also at least for me in vga mode in wm6 none of the 3g, signal strength icons show up in the start bar only the time does.
The only thing i'm against is the vueFlo. Except the part about using vueFlo to sense when to rotate the screen.
Click to expand...
Click to collapse
why not just make vueflo toggle ?
c0mput0r said:
I third the black vga theme. Also in vga mode is it possible to make the start bar a little bigger so it is more finger friendly. Something the size of when it it is in qvga mode would be great. Also when you push the start bar and the drop down list pops up it would be great if that was larger with larger text. Also at least for me in vga mode in wm6 none of the 3g, signal strength icons show up in the start bar only the time does.
The only thing i'm against is the vueFlo. Except the part about using vueFlo to sense when to rotate the screen.
Click to expand...
Click to collapse
i think i can fix the larger text part...
here try this
WARNING...THIS IS NOT REVERSIBLE....NOT WITHOUT CHANGING SOME REG. ENTRIES... AT LEAST (and i don't know which one's need to change!!)
works well with se VGA too esp. if you have fading eyesight!!!
How about an icon on the task bar that rotates screen.
Also, when using the device in QVGA mode, smaller icons on today screen, start/program screen, start/setting screens.
When in VGA mode, but running a QVGA program , show a matching size bigger soft key buttons.
Show connection icons (H, 3G, G) correctly when in true vga mode.
Hi all,
does anybody know if there's a way to quickly change between landscape & portrait on the Trinity - or to set up a hot key to do so?
Thanks.
Of course there is. For instance, install SPB Pocket Plus and assign Rotate Screen Left or Rotate Screen Right to one of Trinity's buttons. There are actually many applications that offer screen rotating function.
You don't need any tool. Just use the normal WM5 settings to assign new functions to key 1 (voice recording) and key 2 (camera). One of the selections is "<Rotate screen>". The assigning of "<Rotate screen>" to the "voice recording" key was one of first things I changed in the Trinity settings.
What about on the screen
...thanks for that, but I kind of like those keys for the camera and sound recording. Is there any way you can put a shortcut on the Today screen to perform the same task?
In Today screen there is by default an icon to rotate the screen!
Icon?
I can't find a default icon on the Today screen for changing screen orientation - can you tell me what it looks like and where it should be?
Thanks
tjw2007 said:
I can't find a default icon on the Today screen for changing screen orientation - can you tell me what it looks like and where it should be?
Click to expand...
Click to collapse
This is part of the HTC-plugin. It should be installed on your device if you have an unbranded Trinity by HTC. It includes a battery indicator and icons for the light settings, the comm manager and the rotation. Those four icons should be in a line somewhere on your today screen.
Exactly.
Starting from left to right I have:
Battery status - Screen orientation - Comm. Manager - Light adjustment
In particular the screen orientation icon is the one with the picture of the P3600 and the stylus pointing its screen
ah!..found it - i could have sworn the screen orientation icon was for something else. Thanks to all.
Marble world 2 worked in full screen onece now the bottom is always chopped off??
why do some full screen apps sometimes get "chopped" off at the bottom / top its odd.
i cant make nester work on tp2 atall yes it loads but again chopped off at bottom would not landscape and tp2 would not allow me to assign keyboard keys to controll it i attempted to configure the controls many times to no avail
the sims 2 says only works in landscape mode pls change screen oriantation and try again; did this to no avail it switches to portrait when it loads then throuhs up the error
picodrive did not work it loaded up and then crashed and closed
anyone with some light on the above things would be brill! thanks
so sorry if this is the wrong section for this post!
I hade that same problem, solved it after installing MorphGear,,
Check this out
http://www.spicypixel.com/web/page/morphgear/Download.aspx
First install the morphgear.. than install the emulator you want ( in your case the Ines )
Its working perfect, you can also assign the keys you want, and get full screen with sound..
Try it ouT !
soon as the misses put her naff tv on tonight i will be checking this out! is morphgear an emulator its self?
how do you get it to go full screen? Right now mine is like a 150 by 150 pixel screen haha.
nvm i got it, in case anybody wonders you just set the screen size from 100% to window size.
it will not flip round to landscape how does one do this it does in the menu when first loaded but the black background and the morph gear logo dont go landscape and neither do the games also some games i load it says no memmory error and loads console up but it means nothing. when i try to landscape it it emains in portrait i.e if i open the keyboard hoevery the bottom off the application chops of 10mm and tou can see the today screen behind it
how do you get the pretend on screen game pad to work also?
What emulators are you using?
problems to config the inputs buttons on TP2 soft morphgear
what'sup everybody, well i have one problema with morphgear, everything is ok but the inputs buttons i just can't config, when i tap the (...) and than tap the button that i would like to change appears the number 229.
i can config the directional only. inthe case of the street fighter for exemple the low punch,medium punch and high punch is the number 229,smae thing with the kicks. i'm stock with just one button but i have 5 other to config. i have the 229 number
help me plz....
i got the same problem and can`t find anny solutions :S
(you can use the "Ctrl", "Del" and the 1. button on the front, but its only 3 buttons and there position is not good for playing)
Try using K For Raphael from this thread:
http://forum.xda-developers.com/showthread.php?t=425646
It worked for me.
The only thing that's still a bit weird is assigning the d-pad buttons. Up and Down seem to be switched with Left and Right, so I have to assign them differently. Anyone else having this problem?
F1zH said:
i got the same problem and can`t find anny solutions :S
(you can use the "Ctrl", "Del" and the 1. button on the front, but its only 3 buttons and there position is not good for playing)
Click to expand...
Click to collapse
yes... it's an issue. the k for raphael.cab needs to be edited to work with the tp2. although the keyboard from the tp is close, obviously, its mapped differently. I can get it to work once in a while but has to be remapped every stinking time you open Morphgear! hopefully, someone with a little skill can fix this soon...
The Rhodium (Touch Pro 2) is a WVGA (Wide VGA) device, which means it has screen resolution of 480x800. Normal VGA is 480x640, so there's a "bar" of 800-640=160 pixels left over at either the bottom or top of your screen when using applications which are written for VGA display.
However, there is a tool which virtually forces your screen to VGA. Basically this means you'll still have the black bar, but all VGA apps will work. Search this forum for "WVGA fix" and fetch it.
As for the black bars being there, call it evolution. I'm rather certain your TV gives you programs in 4:3 and 16:9, black bars are common there too, live with it as it's better than stretched images
Ekipsey said:
The Rhodium (Touch Pro 2) is a WVGA (Wide VGA) device, which means it has screen resolution of 480x800. Normal VGA is 480x640, so there's a "bar" of 800-640=160 pixels left over at either the bottom or top of your screen when using applications which are written for VGA display.
However, there is a tool which virtually forces your screen to VGA. Basically this means you'll still have the black bar, but all VGA apps will work. Search this forum for "WVGA fix" and fetch it.
As for the black bars being there, call it evolution. I'm rather certain your TV gives you programs in 4:3 and 16:9, black bars are common there too, live with it as it's better than stretched images
Click to expand...
Click to collapse
True, that program works well. Been waiting use it since I had my htc wizard. Wish we could get the r for tp2 so we could have the buttons mapped properly.
emulation
Well there is smartgear that works great for 5 dollars. Also have you guys heard of Fcpse1.0 it a playstation emulator that works great.