I have a Cingular branded htc wizard SPL 2.25.0001 IPL 2.25.0001 G4 im guessing.. I tried to do an upgrade to WM6.. It got to 70% and then quit. Now all I get is a rainbow screen. I do see USB on the lower portion of the screen when I plug it back in. ANY HELP?? PLEASE
First of all, if it's a G4 have you unlocked the CID?
Thanks for the quick reply. No I did not unlock it. :/ is there any hope for me? I do get the rainbow boot screen.
jive said:
Thanks for the quick reply. No I did not unlock it. :/ is there any hope for me? I do get the rainbow boot screen.
Click to expand...
Click to collapse
You need to go to the Wizard G4 forum and read the sticky on flashing a G4 phone. You will also find out how to recover with the Wizard Love ROM. You can't do some of the same things on a G4 that you can do on a G3 device, so READ EVERYTHING YOU CAN in that forum to keep from turning your phone into an expensive paperweight. . .
Jive, contact me via AIM and I can go over this with you..
Thanks to madcap180.. got it working by flashing oem rom back on. THANKS! http://www.htcamerica.net/support/8125/software-downloads.html
Related
Hi!
I flashed my Jamin with this ROm:
RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1
Now it is totally stick in bootlaoder. I tried to falsh it with other jamin roms but i get "This NBF file cannot be used for your PDA phone. please get new NBF file."
What should i do. how can i get it back to life. Please help.
Thanks
Is your Prophet a G3 or a G4?
How can i tell
Hi!
How can i tell it was G3 or G4? can you please guide me. i also downloded tht noVendor ID rom. it falshes it upto 80% then it gives same NBF error. please help me.
Thanks
i guess it is G3
Hi!
I guess it is G3
thanks
You can tell if it's G3 or G4 by reading the wiki here: http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how. Basically if your IPL/SPLversion ends with .0000 then it's a G3. If it ends with .0001 it's a G4.
If you flashed a G3 device with a G4 ROM, well ... I'm afraid it's bad news because you could have bricked your phone.
please please
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
thornofcarrion said:
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
Click to expand...
Click to collapse
What is your IPL/SPL version to start with? You need to confirm whether you have flashed the wrong ROM or not.
mY IPL and SPL are..
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
thornofcarrion said:
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
Click to expand...
Click to collapse
OK then, your device seems to have an IPL from a G3 and an SPL from a G4. This is probably because you flashed a G4 ROM on a G3. Did the ROM Update of Jester's ROM finish succesfully? If it did, can you try holding all the three buttons (Camera, Power, Comm Manager) while hitting the soft reset?
If the device comes back with a prompt to "Press the Send button ... " just hit the green telephone button and you're set to go. If it doesn't give you this prompt come back here and tell us what it's doing.
As someone told you in another thread I would suggest installing the latest ROM from imate, i.e. this one ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip. Alternatively you can download it from www.clubimate.com (you need to register first).
When i Try to Reset it
Hi KTA!
i did what you said. when i press send it says format failed. what next thanks already and need more help.
Thanks
hi im sorry if i ask a questian who already asked i guess.
Iv been searching for an answer but did not find any.
I´v tryed to update my rom on my qtek 9100 so i could get WM6 in to my device, but it´s always stops at 99% when im installing. so now when i turn the device om i just have the screen whit 3 diffrent coulors on, so pleace any one can you help me get WM6 in my device or else i have to jump on it and throw it in to the trash. Sorry for my poor english im an swedish idiot...
Best reegarde Andreas...
I presume that your phone is still SIM/CID locked.In order to get your phone upgraded to wm6,its required to have it CID unlocked first.
Which is your device, G3 or G4 ? Post IPL/SPL...?of the phone here,to determine the G3 or G4 version of the phone,cuz for CID unlocking,both have different methods.
Cheers!
Cant start it now... Im realy angry at that little thing now...
its all black in the display. Do you have any good thing to do about that?
got it started for just a 5sec then its blck again... done that about 3 times last houer but it want start...
When it gets like this is there no more to do other then throw it in the trach?
or is there hope , can i do like a hard reset or something?
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Andyswe said:
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Click to expand...
Click to collapse
Yes !
Its a G3,download the official stock rom of your carrier from its website,get the phone into bootloaders (multicolor screen),connect via usb cable,watch small usb appear at the bottom of the bootloader screen and run the RUU,let it complete and your phone will boot up to default status and then download WST tool and run the 'CID Action' button to verify the CID lock.unlock status.
But always get the battery charged before flashing.
Cheers!
Has installed the TNT rom now latest.
Hov do i get the HTC look whit a digital watch??
I assume you mean the HTC Touch clock. It's really a lot more than a digital clock.
Try this: http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html
which rom shall i use if i want a clean WM6 and install the htc Home plugin.?
Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..
The person who tried to upgrade his 8125 has got into some problem in uploading a new version to his 8125 & finally he worked it out. But now the phone has crazy IPL & SPL like IPL-1.01 & SPL-3.08. Therefore, can anyone tell me how to make this normal again???
Because of this I can't figure out whether the device is a G3 or G4 device......
Please some one help me
ash_rocke said:
The person who tried to upgrade his 8125 has got into some problem in uploading a new version to his 8125 & finally he worked it out. But now the phone has crazy IPL & SPL like IPL-1.01 & SPL-3.08. Therefore, can anyone tell me how to make this normal again???
Because of this I can't figure out whether the device is a G3 or G4 device......
Please some one help me
Click to expand...
Click to collapse
Hello...
G4 device shows SPL 3.08.0001 so you have a G3 one...
and... if you need help with your phone PM me and i`ll help you
but for a faster response please contact me via yahoo mess...
hi i just join this website im having problems with posting my question can you help me but i just brought a g-1 and i cant afford the data plan is there a way i can get around dat meaning can i get the data plan and use my phone without paying or messing up my phone pleasw help me
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
almost 50 views and no help
somebody please help me out
Goshdarn invalid vendor id
megagprime said:
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
Click to expand...
Click to collapse
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
ookba said:
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
Click to expand...
Click to collapse
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
sorry about the late reply
i have tried the willow spl (that was my original path)
didn't work can get my spl hard lol
still need help, i think she is bricked
i got the ceda100 boot loader up and cant flash willow or cedar hard spl.... or anything and it doesnt even boot up into windows or anything anymore possibly shes a nice shiny brick
ariesq said:
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
Click to expand...
Click to collapse
hey i got another snap and am ready to flash again but dont really want another paper weight, all i really need help with is usb tethering that doesnt use pam/let my carrier know i am tethered....
i need internet connection sharing like my snap needs a hard spl
different computer, cables, compatibility modes, etc
nothing works
My friend
i have the exact same problem
Bieng researching for the past few days, spent hours on this
Did u find a solution?
I could really use some help right now
Thanks
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose