Database Users

Unable to re flash my orbit

I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks

guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.

Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!

Glad you got it going.

XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...

02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G

baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...

Herald Unbrick... At least!

Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!

wait....how did your herald get bricked?
i assume it was during a failed HardSPL

yes dude unfortunately
but the main here is to recover OS area... at least

I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck

if the above does not work, try flashing using the USPL

tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.

a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.

mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!

Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.

Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:

HEY
how progress on unbricking
hopefully you get it working

first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????

all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored

it means we should give our ppcs to repairman to change their motherboard??????????????

no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us

tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful

thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro

new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami

dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))

tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami

How to FIX INVALID MODEL ID after bad flashing

I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 98%.
now i have only pixels on screen, and nothing happens.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Help... help... help...

Explain a little more by 'changing ROM'!

I was entering a rom and I was blocking the Athena by making a reset everything returned to normal but I can not enter another rom because I get this error.
As we enter the ATHENA in Bootloader I get:
, @
IPL-V1.00
, @ MFG
SPL-3.50.OliNex
Missing data?

What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!

Montecristo said:
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
Help... help... help...
Click to expand...
Click to collapse
cmonex has a automated fix for that, i think its under upgrading fourm

Irus, just to take advantage of this learning opp. What did Montecristo do to the device (or try)? What happen to it?

Kenjari said:
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Click to expand...
Click to collapse
I had installed the rom iRUs, then installed the new rom taxist and 98% were blocking ...
Try to re install and continues to bug me.
Please, my English is not very good ... some help ...

I made the downgrade but I continue to get the same error!

You used the wrong SPL Version
Montecristo said:
I made the downgrade but I continue to get the same error!
Click to expand...
Click to collapse
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.

lakeman said:
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
Click to expand...
Click to collapse
I had the spl 3.5 when installing this ROM.
Already concerned with all rom and tell me the same problem.

same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german

xacsx said:
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
Click to expand...
Click to collapse
Exactly .. this is ... We saw your resolve?

IT WORKS!!!!
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 <<< see here
my ameo lives again YEEEEEEEEEEEEEHHHAAAAAAAAAAAAAA

ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.

cmonex said:
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
Click to expand...
Click to collapse
YES!!!!!!!!!!!! YEAH!!!!!!!!!!! SI!!!!!!!!!!!!! SI !!!!!!!!!!!! MASTER!!!!!!!!!!!! GENIUS!!!!!!!!!!!! MAESTRO!!!!!!!!!!!! GENIO!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!
Now'm going to donate some money for what they've done !!!!!!!!!! Thank you
Thansk!!!!!!!!!!!!!!! Xascx.
I´m very happy!!!!!!!!!!!

Sticky done, thanks CMONEX!

sergiopi said:
Sticky done, thanks CMONEX!
Click to expand...
Click to collapse
ahh I didn't notice you are a moderator thanks for stickying this.

mac number?????
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english

meybaland said:
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
Click to expand...
Click to collapse
If you use router, the number is there....

Few questions:
How do you mess up the modeID and wifi anyway? Is it flashing to many ROMs? Does this automatically happen with the upgrade to spl 3.5? How does this happen?
Second, I have ran across my the mac address....but I'm having a blank....where can you find that at?

red line at left side after installing HSPL1.42

dears,
I need your help to fix or to analyze the following problem:
my mobile is : HTC HD2
SPL: 1.42
after that I changed SPL to HSPL1.42 a vertical red line is appearing on my screen at left side!
please advise

Picture please, or a more detailed description.
Thank you

kindly find the attached picture.
and note that the problem is still after original SPL is restored .
best regards

This is a bootloader issue. Have seen it on the HTC Kaiser.
You won't happen to own a prototype do you??
Try flashing HSPL 1.66

ach75 said:
kindly find the attached picture.
and note that the problem is still after original SPL is restored .
best regards
Click to expand...
Click to collapse
Could be a hardware malfunction. Never seen this before.

dear xmoo,
I did what you suggest (HSPL 1.66) then flash to the original room, but still same problem I have!
dear forelli ,
if this is the case why it was not shown before?
many thanks guys and best regards

ach75 said:
dear xmoo,
I did what you suggest (HSPL 1.66) then flash to the original room, but still same problem I have!
dear forelli ,
if this is the case why it was not shown before?
many thanks guys and best regards
Click to expand...
Click to collapse
Is it a prototype?

cant answer, why it shows after flashing hspl...
but restore your stock spl with hspl2 installer and bring it to your shop
think you got no other way
maybe tell him that it was shown after doing a soft reset or something else.
i think this is just a hardware defect which "showed" surprisingly after flashing hspl. i think theres no connection between hspl and your disfunction.
DN41

White Screen

Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen

Hi,
have you flashed a new ROM before ?
In this case its a Radio Problem -try to update to (min) version 2.10. 50.08_2
http://forum.xda-developers.com/showthread.php?t=611787
good luck

I have installed the new Flash from the offical HTC HD2 site but that was with the installler.
Do these work the same way??
Greets
Ben

you have to do a HardSPL before -than you can flash Radios via the SDcard-method and via CostumRUU (like the Installer from HTC)
read this TUT for futher questions:
http://forum.xda-developers.com/showthread.php?t=609477

Rupesh
bdiepeveen said:
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Click to expand...
Click to collapse
===================
Hi Friend,
I also had the same problem, i took it to HTC Service center and found problem in the motherboard, they replaced the motherboard and its working fine from me. (my device is under warranty )

bdiepeveen said:
The problem with my HD2 is that when i start it the screen stays white.
Click to expand...
Click to collapse
usually happens when you flash a cooked rom that needs a different radio.
I can do a hard reset and even do a factory reset.
Click to expand...
Click to collapse
factory and hard reset are the same thing.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
Click to expand...
Click to collapse
red white and blue is 'bootloader'.
So, boot to bootloader, see what it says next to spl.

it says SPL-1.66.0000 XE
What can i do with that??
(Sorry for the obvious noob questions i'm new to the HTC HD2)
*************
Update :
oke i've gotten a bit further now.
I've installed HSPL
So now i must use a ROM suitable for my phone correct??
Agian sorry for the obvious question
**************
Update:
For some reason it booted fully ,
got the screen white screen with HTC then my provider screen that took a while then the screen turns black.

*remove please*

well i've manged to install HSPL,
and installed a ROM.
now the rom starts up but it shuts down after passing the HTC screen.
Rom i installed is Artemis NLD
I tried rebooting then i get the windows screen wich keeps on for a long while nothing happends
I have no idea what to do next

what radio do you have exactly?
and do you mean THIS rom?

thxx all..

samsamuel said:
what radio do you have exactly?
and do you mean THIS rom?
Click to expand...
Click to collapse
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??

bdiepeveen said:
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
Click to expand...
Click to collapse
when the phone tries to start, do you get the small writing, bottom left?
there are three lines, one is the radio (i think the 'r' one, but im not sure, lol)
if you arent sure, you can always pick a radio from the ROM thread, he mentions three or four he tests with, get one of them and flash it from bootloader.

Hard reset dude....
Good luck...

oke my Radio rom is:
2.07.51.22.~2
So i need to flash the radio rom to a newer version?

I've got it working agian
I took the following :
Leo_RADIO_15.37.50.07U_2.10. 50.08_2
Atermis Rom
And now its working again
Thanks for all the assistance.
Just a quick question tough,
Wich rom would you advise??

glad its working. i won't recommend a rom,i recommend you try a few and see what works best for you.