Related
Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami
Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Hi,
have you flashed a new ROM before ?
In this case its a Radio Problem -try to update to (min) version 2.10. 50.08_2
http://forum.xda-developers.com/showthread.php?t=611787
good luck
I have installed the new Flash from the offical HTC HD2 site but that was with the installler.
Do these work the same way??
Greets
Ben
you have to do a HardSPL before -than you can flash Radios via the SDcard-method and via CostumRUU (like the Installer from HTC)
read this TUT for futher questions:
http://forum.xda-developers.com/showthread.php?t=609477
Rupesh
bdiepeveen said:
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Click to expand...
Click to collapse
===================
Hi Friend,
I also had the same problem, i took it to HTC Service center and found problem in the motherboard, they replaced the motherboard and its working fine from me. (my device is under warranty )
bdiepeveen said:
The problem with my HD2 is that when i start it the screen stays white.
Click to expand...
Click to collapse
usually happens when you flash a cooked rom that needs a different radio.
I can do a hard reset and even do a factory reset.
Click to expand...
Click to collapse
factory and hard reset are the same thing.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
Click to expand...
Click to collapse
red white and blue is 'bootloader'.
So, boot to bootloader, see what it says next to spl.
it says SPL-1.66.0000 XE
What can i do with that??
(Sorry for the obvious noob questions i'm new to the HTC HD2)
*************
Update :
oke i've gotten a bit further now.
I've installed HSPL
So now i must use a ROM suitable for my phone correct??
Agian sorry for the obvious question
**************
Update:
For some reason it booted fully ,
got the screen white screen with HTC then my provider screen that took a while then the screen turns black.
*remove please*
well i've manged to install HSPL,
and installed a ROM.
now the rom starts up but it shuts down after passing the HTC screen.
Rom i installed is Artemis NLD
I tried rebooting then i get the windows screen wich keeps on for a long while nothing happends
I have no idea what to do next
what radio do you have exactly?
and do you mean THIS rom?
thxx all..
samsamuel said:
what radio do you have exactly?
and do you mean THIS rom?
Click to expand...
Click to collapse
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
bdiepeveen said:
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
Click to expand...
Click to collapse
when the phone tries to start, do you get the small writing, bottom left?
there are three lines, one is the radio (i think the 'r' one, but im not sure, lol)
if you arent sure, you can always pick a radio from the ROM thread, he mentions three or four he tests with, get one of them and flash it from bootloader.
Hard reset dude....
Good luck...
oke my Radio rom is:
2.07.51.22.~2
So i need to flash the radio rom to a newer version?
I've got it working agian
I took the following :
Leo_RADIO_15.37.50.07U_2.10. 50.08_2
Atermis Rom
And now its working again
Thanks for all the assistance.
Just a quick question tough,
Wich rom would you advise??
glad its working. i won't recommend a rom,i recommend you try a few and see what works best for you.
I used to use cooked rom, tried 6.1, 6.5 and 6.5.x.
Failed to search for phone signal today, confirmed not SIM card problem.
Will cooked rom damage hardware? Thanks!
I don't think so , Hard-reset your phone with your Sim-card inside it and it will work again
If the problem still persist, try to install radio from this link :
http://forum.xda-developers.com/showthread.php?t=440503
If that does not solve the problem, I think the only way is to install a shipped ROM that suits with your phone's specification (ELF or ELFIN, Model ID and etc).
But don't forget to return your SPL and IPL to origina ones when you will load a shipped ROM. You can find them on XDA Wiki.
Hope your Elf (Elfin?) will be Ok!
How can I know my original IPL? SPL?
if you didn't run the dsixda script before hand that grabs all your information, and have sinced changed your IPL/SPL then I'm not sure.
However, If you know your phone model number (T-MOB0005 etc.) You may be able to guesstimate to what they were based on that - Personally, I think that could be a bit risky, but it was worth the suggestion.
Do you remember if you have changed the IPL and SPL? You could always run the dsixda script now to see what you have. It should be in the ROM section
Sorry I can't be more help, but I can only make a suggestion as to how, as I have always took a note of them before starting anything.
At the same time - I also have an elf that is unable to connect to a network, I have tried radio upgrades etc and custom roms, so if you do fix it, I know that I would appreciate the outcome, as would many others who have posted the same issue - In the mean time I am continuing my hunt for a fix for it
Stu
captainstu72 said:
if you didn't run the dsixda script before hand that grabs all your information, and have sinced changed your IPL/SPL then I'm not sure.
However, If you know your phone model number (T-MOB0005 etc.) You may be able to guesstimate to what they were based on that - Personally, I think that could be a bit risky, but it was worth the suggestion.
Do you remember if you have changed the IPL and SPL? You could always run the dsixda script now to see what you have. It should be in the ROM section
Sorry I can't be more help, but I can only make a suggestion as to how, as I have always took a note of them before starting anything.
At the same time - I also have an elf that is unable to connect to a network, I have tried radio upgrades etc and custom roms, so if you do fix it, I know that I would appreciate the outcome, as would many others who have posted the same issue - In the mean time I am continuing my hunt for a fix for it
Stu
Click to expand...
Click to collapse
Is that means that I can only use cooked rom from now on if I don't know the original SPL IPL?
rexlun said:
Is that means that I can only use cooked rom from now on if I don't know the original SPL IPL?
Click to expand...
Click to collapse
If you haven't changed them, then you could well still be able to use your shipped rom.
but if you don't know what they were, and have changed them, then yes, custom roms is the only way for you, from what I understand.
captainstu72 said:
If you haven't changed them, then you could well still be able to use your shipped rom.
but if you don't know what they were, and have changed them, then yes, custom roms is the only way for you, from what I understand.
Click to expand...
Click to collapse
Thank you for your kindly help! Is so nice to be here!
I'll keep trying and report here if I've my 'touch' recover!
Really Thanks!
No probs, it's what this site is for
Hi Guys,
I have an HD2 with latest Stock Rom running. The Bootscreen shows PB81 instead of PB81100 as normal.
I thought this was already resolved in your other thread...you need to flash the stock ROM for your region and carrier, not the stock HTC one.
ashasaur said:
I thought this was already resolved in your other thread...you need to flash the stock ROM for your region and carrier, not the stock HTC one.
Click to expand...
Click to collapse
Yeah, I thought he did. However, if he is interested, he can try this method:
http://forum.xda-developers.com/showthread.php?t=704995
Goodluck
ashasaur said:
I thought this was already resolved in your other thread...you need to flash the stock ROM for your region and carrier, not the stock HTC one.
Click to expand...
Click to collapse
No unfortunately not. The phone was sold in Austria from Provider "Drei" without specific Carrier-ROM. I already flashed the original ROM from HTC-Website and the Problem is already there. I do have a similar phone (for my girlfriend) from same provider with other Sim-Unlock and it runs completly smoth without any freezes and GPS! It's flashed with Original HTC ROM.
silverwind said:
Yeah, I thought he did. However, if he is interested, he can try this method:
http://forum.xda-developers.com/showthread.php?t=704995
Goodluck
Click to expand...
Click to collapse
Thanky for your hint, I already found it but as I understood, its recommended for T-Mobile-US-HD2. I have an European HD2 with official HTC-ROM and 512 MB instead of 1024 MB.
I already flashed SPL and HSPL, tried all provided by Bepe&Cotulla but PB81*** never changed. I think SPL flashing and changing does not really help because I tried all of them and PB81*** was never touched. SPL stands for "Second Program Loader" as I know and maybe I need a "First Program Loader" Flash/Hack!? So if there is anyone out there who could tell me how to change PB81*** to PB81100! Please help me!
Push this thread.
Push this thread.
Bruno Kreisky said:
No unfortunately not. The phone was sold in Austria from Provider "Drei" without specific Carrier-ROM. I already flashed the original ROM from HTC-Website and the Problem is already there. I do have a similar phone (for my girlfriend) from same provider with other Sim-Unlock and it runs completly smoth without any freezes and GPS! It's flashed with Original HTC ROM.
Thanky for your hint, I already found it but as I understood, its recommended for T-Mobile-US-HD2. I have an European HD2 with official HTC-ROM and 512 MB instead of 1024 MB.
I already flashed SPL and HSPL, tried all provided by Bepe&Cotulla but PB81*** never changed. I think SPL flashing and changing does not really help because I tried all of them and PB81*** was never touched. SPL stands for "Second Program Loader" as I know and maybe I need a "First Program Loader" Flash/Hack!? So if there is anyone out there who could tell me how to change PB81*** to PB81100! Please help me!
Click to expand...
Click to collapse
should still work fine on reg leo, it worked for telstra users as well as tmous, which are identical to regular,
samsamuel said:
should still work fine on reg leo, it worked for telstra users as well as tmous, which are identical to regular,
Click to expand...
Click to collapse
Hi,
I do not understand what do you mean? If you could help me, please tell me with a few more words what I shall do?
Bruno Kreisky said:
Hi,
I do not understand what do you mean? If you could help me, please tell me with a few more words what I shall do?
Click to expand...
Click to collapse
I think samsamuel meant that the linked thread was good for your Leo, too, not only Leo1024.
As you write yourself, you should edit to PB81100 for a European device, that´s actually the difference.
Just do as described in the linked thread, but read the complete thread - it´s short, no big thing to try I guess.
Tried as described in thread.
1.) I downloaded the 1024MB HSPL2 EXE.
2.) I did TXT-file called "ModelIDCheckBypass.txt"
3.) I wrote PB81100 into TXT-file
4.) Stored TXT-file at C:\ and copied it also to directory where HSPL2 EXE is stored
5.) Both TXT-files are read-only
6.) Started the HSPL2 EXE with administrator privilegues, saw "We hacked it" (or something similar) on phone's display.
7.) Unfortunately PB81*** at Boot Screen.
I think the suggested solution in this thread does not really fix my problem. Because I do not have a problem with installing ROM from HTC. The walkthrough described in thread is to enable other HD2's for other ROMs.
I think I do have a problem one stack below SPL and I dont have experience there :-(
Did you try the same with HSPL2.exe? HSPL_1024 won´t work with European devices maybe...
I did the same steps also with that HSPL. Same result :-(