Need Help in IPL/SPL (IPL-1.01/SPL-3.08) - 8125, K-JAM, P4300, MDA Vario General

The person who tried to upgrade his 8125 has got into some problem in uploading a new version to his 8125 & finally he worked it out. But now the phone has crazy IPL & SPL like IPL-1.01 & SPL-3.08. Therefore, can anyone tell me how to make this normal again???
Because of this I can't figure out whether the device is a G3 or G4 device......
Please some one help me

ash_rocke said:
The person who tried to upgrade his 8125 has got into some problem in uploading a new version to his 8125 & finally he worked it out. But now the phone has crazy IPL & SPL like IPL-1.01 & SPL-3.08. Therefore, can anyone tell me how to make this normal again???
Because of this I can't figure out whether the device is a G3 or G4 device......
Please some one help me
Click to expand...
Click to collapse
Hello...
G4 device shows SPL 3.08.0001 so you have a G3 one...
and... if you need help with your phone PM me and i`ll help you
but for a faster response please contact me via yahoo mess...

hi i just join this website im having problems with posting my question can you help me but i just brought a g-1 and i cant afford the data plan is there a way i can get around dat meaning can i get the data plan and use my phone without paying or messing up my phone pleasw help me

Related

Jamin flashed with Jester now in bootloader

Hi!
I flashed my Jamin with this ROm:
RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1
Now it is totally stick in bootlaoder. I tried to falsh it with other jamin roms but i get "This NBF file cannot be used for your PDA phone. please get new NBF file."
What should i do. how can i get it back to life. Please help.
Thanks
Is your Prophet a G3 or a G4?
How can i tell
Hi!
How can i tell it was G3 or G4? can you please guide me. i also downloded tht noVendor ID rom. it falshes it upto 80% then it gives same NBF error. please help me.
Thanks
i guess it is G3
Hi!
I guess it is G3
thanks
You can tell if it's G3 or G4 by reading the wiki here: http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how. Basically if your IPL/SPLversion ends with .0000 then it's a G3. If it ends with .0001 it's a G4.
If you flashed a G3 device with a G4 ROM, well ... I'm afraid it's bad news because you could have bricked your phone.
please please
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
thornofcarrion said:
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
Click to expand...
Click to collapse
What is your IPL/SPL version to start with? You need to confirm whether you have flashed the wrong ROM or not.
mY IPL and SPL are..
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
thornofcarrion said:
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
Click to expand...
Click to collapse
OK then, your device seems to have an IPL from a G3 and an SPL from a G4. This is probably because you flashed a G4 ROM on a G3. Did the ROM Update of Jester's ROM finish succesfully? If it did, can you try holding all the three buttons (Camera, Power, Comm Manager) while hitting the soft reset?
If the device comes back with a prompt to "Press the Send button ... " just hit the green telephone button and you're set to go. If it doesn't give you this prompt come back here and tell us what it's doing.
As someone told you in another thread I would suggest installing the latest ROM from imate, i.e. this one ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip. Alternatively you can download it from www.clubimate.com (you need to register first).
When i Try to Reset it
Hi KTA!
i did what you said. when i press send it says format failed. what next thanks already and need more help.
Thanks

can you please help me to unlock my MDA?! someone please?!

please help me on my mda i'm trying to unlock it?! help me to unlock the simlock?! please?! i use lokiwiz02b but nothing happens?!
read the wiki.
You need to check if your wizard is a G3 or a G4 device.
do a soft reset and check your IPL/SPL; a G4 PDA will report an IPL and SPL similar to 2.21.0001 and a G3 PDA will report something similar to 2.21 (notice the G3 doesn't have the trailing .0001!)
if you have a G3 check out this link: http://forum.xda-developers.com/showthread.php?t=285435
if you have a G4 check out the threads in the G4 Section.
I know reading all the stuff in here may seem annoying but it really helps.
enjoy!
If you have the MDA 90 days call T-Mobile and get the unlock code/sequence from them. It's free and they will give it to you.
Since I added my MDA to a family plan they gave the unlock code/sequence without the 90 day wait.
Yeah, it's not as slick as a cool program, but it does work and it is free.

Rainbow Screen after rom update failed How do I fix?

I have a Cingular branded htc wizard SPL 2.25.0001 IPL 2.25.0001 G4 im guessing.. I tried to do an upgrade to WM6.. It got to 70% and then quit. Now all I get is a rainbow screen. I do see USB on the lower portion of the screen when I plug it back in. ANY HELP?? PLEASE
First of all, if it's a G4 have you unlocked the CID?
Thanks for the quick reply. No I did not unlock it. :/ is there any hope for me? I do get the rainbow boot screen.
jive said:
Thanks for the quick reply. No I did not unlock it. :/ is there any hope for me? I do get the rainbow boot screen.
Click to expand...
Click to collapse
You need to go to the Wizard G4 forum and read the sticky on flashing a G4 phone. You will also find out how to recover with the Wizard Love ROM. You can't do some of the same things on a G4 that you can do on a G3 device, so READ EVERYTHING YOU CAN in that forum to keep from turning your phone into an expensive paperweight. . .
Jive, contact me via AIM and I can go over this with you..
Thanks to madcap180.. got it working by flashing oem rom back on. THANKS! http://www.htcamerica.net/support/8125/software-downloads.html

Flashed The wrong ROM to p4300 i need help!!!!!

Hey, I'm new to this forum and im in such a mess with my htc p4300. i flashed wizard_love ROM to my phone but now it takes forever to setup the software. Does anyone know where i can get the correct ROM for this model phone? I would dearly appreciate it if someone could help me out or at least lead my in the right direction.
flip0406 said:
Hey, I'm new to this forum and im in such a mess with my htc p4300. i flashed wizard_love ROM to my phone but now it takes forever to setup the software. Does anyone know where i can get the correct ROM for this model phone? I would dearly appreciate it if someone could help me out or at least lead my in the right direction.
Click to expand...
Click to collapse
HTC P4300 is AKA HTC Wizard isn't it? So, maybe have a look in the uhmm... Wizard forum? Right HERE or HERE for WM6 ROMs
i dont know if my wizard is a g3 or a g4, IPL 2.28.001, SPL 2.28.001. i flashed a herald ROM to it because some guy told me it would work.
flip0406 said:
i dont know if my wizard is a g3 or a g4, IPL 2.28.001, SPL 2.28.001. i flashed a herald ROM to it because some guy told me it would work.
Click to expand...
Click to collapse
Don't post these questions here. There is a Wizard forum with a lot of Wizard experts for that. I have taken a quick look in the WIKI, and IPL 2.xx.000x should be a G4.

need help htc 8125

hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05
I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now
i dont know wheres to find the roms do you have a link or something
Have you CID unlocked yet?
Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...
Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.
my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one
mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!
Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.
About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.
As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......
Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!

Categories

Resources