Database Users

Invalid Vendor Id and upgrade to wm6

i have the c800 with rom 1.7 , i would like to upgrade to newer version at 1.8 but at 2 % was stoping with note : INVALID VENDOR ID
Can somebody help me to this problem, i would like to upgrade to wm 6 and need the radio version more than 2.71 instead the original asia at 2.69
This lowest version make the signal always keep searching on gsm..with wm 6 os , really sad for this problems..hoping somebody can help this problem

Invalid Vedor ID means that your device is CID-locked, so you can only flash official ROM's to your phone. You can however unlock your phone at imei-check.co.uk.. BUT a person has already bricked his device with this, because it did not work properly! At this tim of speaking there is no alternative for CID-unlocking.

CID unlock...
...i have an Herald to. The OS was in finish(i think)...the only way i found to write an WWE OS...wrote to IM CHECK.CO.UK...in same day send me the application for my IMEI to unlock. I made the unlock under Vista Home Premium...now i have a brand new WWE OS in my HERALD.
Try it...it realy work.

CID unlock...
http://www.imei-check.co.uk/

But the CID unlock for what is? It's for a phone which is blocked to a company?

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
Why are you posting like you have the solution and instead you are looking for help?
If you do so, only people with same problem like you will read your post!!!!
Christian

schumy said:
But the CID unlock for what is? It's for a phone which is blocked to a company?
Click to expand...
Click to collapse
For the lock that is set by the company indeed

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
The title of your thread is a little bit too optimistic don't you think? If you have the solution, kudos! But if not, please watch your title.. I almost jumped a hole in the ozon layer, but too bad...

need help ( german to english)
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...

kunalg7 said:
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
Click to expand...
Click to collapse
While the phone is on, press the soft reset button with the stylus while holding the camera button. You should then see a tri-colored screen(this is the bootloader mode, to exit simply soft reset again). What version does it say next to IPL? If it is 4.0 or higher, you need to flash HardSPL, found here. Don't do it anyway if your IPL is lower than that, it will turn your phone into an expensive doorstop. If you do have the right IPL, then proceed to flash the HardSPL, then choose your ROM and install it. However keep in mind, you won't be able to install any official ROMs while HardSPL'd. But official ROMs suck anyway.

98 %

good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!

gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
What rom are you trying to put on? If you have the problem i think you have, i would not go around asking everyone cus you will get smoked! As its on here like a million times!

First off take your storage card out.. .. send off, flash back to original carrier rom... leave storage card out and flash again..

....
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe

where can i find th original t-mobile 1.08 rom for the mda....
i cant seem to find it nowhere....
i had the same problem wen i was upgradin to wm6

I guess it does offend the moderators because I just posted the same question after searching and searching for weeks on resolution on this issue. They toasted my thread, probably this one too and I hope they don't because after reading 100+ posts on this topic, there was no resolution. Of course I tried without the SD card. I tried the 1.05 ROM as well as xenin's T-Mobile 2.26 ROM with built in CID unlock and both froze at 98%. By the way is your QTEK 9100 from the factory because mine is and I think this is the common denominator in this problem. Please someone help cause I'm probably new to this forum (not to howardforums) but I know my phone stuff so this is a real issue! Thanks in advance and pls do not delete this thread. Thanks.

sunycheeba416 said:
... T-Mobile 2.26 ROM with built in CID unlock ...
Click to expand...
Click to collapse
You better start re-reading the 100+ posts!
First of all your WIZ needs to be CID unlocked - a 'build-in' CID unlock in a ROM you're trying to flash will not help!

I understand that. That was my second way of trying to resolve it. I originally followed the "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" post and followed it word for word (and read all 36 pages). I tried flashing buttons 1.05 ROM (http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html) and got the 98%. The second time I thought I'd give it a shot and tried xenin's T-Mobile ROM with built-in CID and it froze at 98% too! My suspicion is that there is something different about factory phone than SP branded phones. Anyone else?
I also rebooted my PC and phone. Deleted all my session temp files. Tried 3 different computers. Tried without SD card. Everytime I it froze at 98% and had to revert back to the original QTEK 9100 ROM (2.17). And just for kicks I tried installing T-Mobile's original 2.26 ROM and it gave me a "vendor match" error, meaning it's still CID locked.

Umm, if you bought it straight from HTC/Qtek, wouldn't it already be unlocked? From your last post, it seems you do not have a branded or locked phone...

It is SIM unlocked which means I can use an SIM card. BUT it is not CID unlocked meaning that I can't flash the ROM to another maker's ROM (like QTEK to T-Mobile or QTEK to Cingular or QTEK to Custom ROM).
I wsa thinking that HTC and QTEK have tight bonds and was wondering if I can make the jump to an HTC ROM and CID unlock it from there. Not sure if that makes a difference. Kinda stuck

gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
You must flash a FULL carrier 2.xx rom before flashing any custom rom from this site (other than the ones used for CID unlocking)
You will have issues if you skip step 17 of the Definitive guide to Unlocking and Upgrading G3 Wizards (Sticky in this forum).

hello just bought a qtek 9100 here in russia

the os is all in russian so how do i load windows mobile 5 ENG version or where can i download
im not really a dev. but know how to FLASH i did the upgrade to 6 thing but now itsmobile 6 all in russian DOH
if anyone knows the ROM to download could ya send link thnaks
cause all the old roms i cant download cause problems with the m not being there no more

You can download the official carrier's wm5 WWE Rom from its official website of your phone and flash or SIM/CID unlock your phone and upgrade to the latest custom build wm6 English Roms from this forum and flash to upgrade.
Cheers!

thanks i think i just bricked it thou
i tried to install RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
it went 3 colors and turned off ... UGG now i cant get it to power what should i do now?

Which is your phone a G3 or G4,post ipl/spl...? of the phone.Check your battery,was it fully charged when you flashed,try to charge the battery with a wall charger as it won't charge via usb and in bootloaders (tricolor screen)
Try to get your phone in bootloaders(tricolor) by pressing and keep holding down the camera button and at the same time press Power On button,it shud wake up and go into bootloaders,if it goes into bootloaders,its safe,but first try to charge the battery.
Cheers!

thanks mmucho mucho man all i had to do was reset doh such a noob
so if i install
the one off tmobile it should be ok? cause q tek dosent offer in english i think
zabardast_1 said:
Which is your phone a G3 or G4,post ipl/spl...? of the phone.Check your battery,was it fully charged when you flashed,try to charge the battery with a wall charger as it won't charge via usb and in bootloaders (tricolor screen)
Try to get your phone in bootloaders(tricolor) by pressing and keep holding down the camera button and at the same time press Power On button,it shud wake up and go into bootloaders,if it goes into bootloaders,its safe,but first try to charge the battery.
Cheers!
Click to expand...
Click to collapse

ps its a g4 if i uinstall RUU172171WWE_T-Mobile-UK_Shipping.exe would it **** it up cause it says 1's instaed of 2 's
zabardast_1 said:
Which is your phone a G3 or G4,post ipl/spl...? of the phone.Check your battery,was it fully charged when you flashed,try to charge the battery with a wall charger as it won't charge via usb and in bootloaders (tricolor screen)
Try to get your phone in bootloaders(tricolor) by pressing and keep holding down the camera button and at the same time press Power On button,it shud wake up and go into bootloaders,if it goes into bootloaders,its safe,but first try to charge the battery.
Cheers!
Click to expand...
Click to collapse

Nopes!!!
As long as you keep flashing latest official Roms,it won't harm your phone,cuz latest official roms are made for both G3 and G4 phones,they have seperate ipl/spl included for both versions,when you flash it ,it'll only flash the ipl/spl according to the version of the phone,but all official roms are wm5 roms,a very few offer free wm6 upgrades to their users.
You can download official wm5 roms as per your carrier from the following link :-
http://forum.xda-developers.com/showthread.php?t=342744
But,if you want to upgrade to latest wm6 roms,you'll have to undergo certain methods to do so like 'HardSPL' or 'SoftSPL',but keep in mind a G4 device cannot , I repeat,cannot be CID unlocked like a G3 device and upgrade it.Before upgrading your phone,read all the upgrading methods provided for G4 phones in the G4 forum of this xda-forum.
Good Luck

ive followed this to the tee im about to puke uim getting so fustrated haha..
right when it gets up to update thing it sayss this update thing is to old... is it because i have WM6 running and seeingnthat its trying to revert to 5?
and wqhy does it say update cause i down loaded the W5 qtek rom from the site
anything will help sorry for buggin
zabardast_1 said:
Nopes!!!
As long as you keep flashing latest official Roms,it won't harm your phone,cuz latest official roms are made for both G3 and G4 phones,they have seperate ipl/spl included for both versions,when you flash it ,it'll only flash the ipl/spl according to the version of the phone,but all official roms are wm5 roms,a very few offer free wm6 upgrades to their users.
You can download official wm5 roms as per your carrier from the following link :-
http://forum.xda-developers.com/showthread.php?t=342744
But,if you want to upgrade to latest wm6 roms,you'll have to undergo certain methods to do so like 'HardSPL' or 'SoftSPL',but keep in mind a G4 device cannot , I repeat,cannot be CID unlocked like a G3 device and upgrade it.Before upgrading your phone,read all the upgrading methods provided for G4 phones in the G4 forum of this xda-forum.
Good Luck
Click to expand...
Click to collapse

need help htc 8125

hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05

I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now

i dont know wheres to find the roms do you have a link or something

Have you CID unlocked yet?

Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...

Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.

I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.

hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.

my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one

mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!

Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.

About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.

I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?

hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?

the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.

hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck

Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?

hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.

As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......

Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!

My mobile don't boot...

Hi all, I use the Sense 3.5 ROM and it's great!
But.. have stayed at the three colours screen and no way to get out of there ...
I've tried everything from installing windows ROM from SD ...
Installed but never gets to boot.
Sorry for my bad English, but I've come to this forum because it is my last hope to save my mini ...
thanks

Please ...
I've come to the best forum to try to solve my problem ...

ferr456, we have already answered that, georgedr72 had similar this problem, read this:
http://forum.xda-developers.com/showthread.php?t=1625638&page=80

iPlasm said:
ferr456, we have already answered that, georgedr72 had similar this problem, read this:
http://forum.xda-developers.com/showthread.php?t=1625638&page=80
Click to expand...
Click to collapse
Nothing ... I know I don't have bootloader ... there was any way to install a bootloader from tricolor screen?

ferr456 said:
Nothing ... I know I don't have bootloader ... there was any way to install a bootloader from tricolor screen?
Click to expand...
Click to collapse
these aren't available yet, You may Try to factory reset the phone by downloading WM6.5 ROM from HTC.com, contact them and you will get the ROM for your Phone.
and after these, you can begin for android

iPlasm said:
these aren't available yet, You may Try to factory reset the phone by downloading WM6.5 ROM from HTC.com, contact them and you will get the ROM for your Phone.
and after these, you can begin for android
Click to expand...
Click to collapse
This video shows my problem (youtube) watch?v=kdIbKoA3y5o
I can't put the video because spam problems ... sorry 4 my bad english, I'm spanish...

ferr456 said:
Nothing ... I know I don't have bootloader ... there was any way to install a bootloader from tricolor screen?
Click to expand...
Click to collapse
if you still have access to the three color screen (Bootloader mode) on your device, it means you still have the bootloader !
so you only need to flash again to the official rom

ferr456 said:
This video shows my problem (youtube) watch?v=kdIbKoA3y5o
I can't put the video because spam problems ... sorry 4 my bad english, I'm spanish...
Click to expand...
Click to collapse
What I remember I never pulled battery out for this factory reset.
But why did you pull battery out? shouldn't it restart by it self?
Haven't you tried your HTC stock ROM? with it's officially you must install via PC (via cable USB) and not SDCard.

iPlasm said:
What I remember I never pulled battery out for this factory reset.
But why did you pull battery out? shouldn't it restart by it self?
Haven't you tried your HTC stock ROM? with it's officially you must install via PC (via cable USB) and not SDCard.
Click to expand...
Click to collapse
I tried the Stock ROM through the PC (USB), but ... anything, still displays the tricolor screen and I can not get out of there ..
I tested with the Vodafone version (1.46) and is the install but still shows the tricolor screen.
But I tested with 1.36 and nothing but less than 1%

ferr456 said:
I tried the Stock ROM through the PC (USB), but ... anything, still displays the tricolor screen and I can not get out of there ..
I tested with the Vodafone version (1.46) and is the install but still shows the tricolor screen.
But I tested with 1.36 and nothing but less than 1%
Click to expand...
Click to collapse
Well... Let's start over, Have you contacted htc for your Phone's serial number & gave you right ROM?

iPlasm said:
Well... Let's start over, Have you contacted htc for your Phone's serial number & gave you right ROM?
Click to expand...
Click to collapse
If the phone was vodafone but is released by IMEI, was wearing WM6.5 version 1.41 of before putting android (sense 3.5)
I called HTC but want to pay € 100 ...
I was told to use the Vodafone 1.41 ROM but it did not work ...

ferr456 said:
If the phone was vodafone but is released by IMEI, was wearing WM6.5 version 1.41 of before putting android (sense 3.5)
I called HTC but want to pay € 100 ...
I was told to use the Vodafone 1.41 ROM but it did not work ...
Click to expand...
Click to collapse
I did not understand this exactly, HTC wants 100 euro for telling your which is right ROM for you?
And HTC told you to use this Vodafone ROM?
I just want that you are sure you have the right ROM.
The all you have to do (it's legal) is you give them your phone (S/N) to HTC and they will give you link to your Right ROM.
for example, mine is italian HTC mini Phone, and I even not bought this phone in italy and even I don't know italian language.

iPlasm said:
I did not understand this exactly, HTC wants 100 euro for telling your which is right ROM for you?
And HTC told you to use this Vodafone ROM?
I just want that you are sure you have the right ROM.
The all you have to do (it's legal) is you give them your phone (S/N) to HTC and they will give you link to your Right ROM.
for example, mine is italian HTC mini Phone, and I even not bought this phone in italy and even I don't know italian language.
Click to expand...
Click to collapse
No, I just got the HTC Vodafone ROM.
They ask me € 100 to fix the phone.
I upgraded the vodafone ROM via PC (USB) but it did not work ... I keep trying things ... I also tried again but with the ROM 1.36 (by SD) and I get the phone ''Not allow''. And in the PC error 294: Invalid ID vendor error...

ferr456 said:
No, I just got the HTC Vodafone ROM.
They ask me € 100 to fix the phone.
I upgraded the vodafone ROM via PC (USB) but it did not work ... I keep trying things ... I also tried again but with the ROM 1.36 (by SD) and I get the phone ''Not allow''. And in the PC error 294: Invalid ID vendor error...
Click to expand...
Click to collapse
This is what I mean "Invalid ID vendor error" this means you haven't the right ROM for your phone.
I think you've still problem with your right ROM,
Give me your (S/N) that is written on your phone's box. and I will get the right ROM for you..
You should pass the right ROM :fingers-crossed:

1 press both volume button at the same time along with the power button then press vol up to restore factory after that remove the battery and re insert it then press volume down along with power u will get three color screen install the official stock rom wm 6.5 after that if u want andriod start it from the scratch

iPlasm said:
This is what I mean "Invalid ID vendor error" this means you haven't the right ROM for your phone.
I think you've still problem with your right ROM,
Give me your (S/N) that is written on your phone's box. and I will get the right ROM for you..
You should pass the right ROM :fingers-crossed:
Click to expand...
Click to collapse
I send you the serial number with private message

Good, I will tell your right ROM soon...

ferr456, sorry i was late.
well about that, I contact them many times and they don'y reply to me?!
ferr, Try to do that, contact them or in their store, ask them give me right ROM for my htc mini, and this serial will help them to find for you.
OR, tell me where did you bought it (country) and is it unlocked or locked phone? and it's official language.. by this you can try those ROMs
and one of these will work for you: http://www.shipped-roms.com/index.php?category=windows mobile&model=Photon

Hello, don't worry, my HTC is bought in Spain, and Spanish. I tried some ROMs link (with SSPL) but nothing, not leaving the tricolor screen ...
All remain standing at 0% or 1% pass and quickly removed

So yours is Spanish,
Then try these ROMs, one of them should work.. :fingers-crossed:
These are Spanish ROMs (Photon)
http://www.shipped-roms.com/downloa...SPA_1.07.412.1_Radio_Signed_20100305_Ship.exe
http://www.shipped-roms.com/downloa...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe
http://www.shipped-roms.com/downloa...adio_Signed_32.2807.05.06_0.63.05.41_Ship.exe
These are Europe ROMs (Photon)
http://www.shipped-roms.com/downloa...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe
http://www.shipped-roms.com/downloa...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe
http://www.shipped-roms.com/downloa...adio_Signed_32.2802.05.06_0.63.05.35_Ship.exe
http://www.shipped-roms.com/downloa...ope_1.06.479.1_Radio_Signed_20100305_Ship.exe
http://www.shipped-roms.com/downloa...ope_1.07.401.1_Radio_Signed_20100305_Ship.exe
http://www.shipped-roms.com/downloa...adio_Signed_32.2802.05.06_0.63.05.35_Ship.exe
http://www.shipped-roms.com/downloa...ope_1.06.401.2_Radio_Signed_20100305_Ship.exe
http://www.shipped-roms.com/downloa...ope_1.07.479.1_Radio_Signed_20100305_Ship.exe
Have a nice try