good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
What rom are you trying to put on? If you have the problem i think you have, i would not go around asking everyone cus you will get smoked! As its on here like a million times!
First off take your storage card out.. .. send off, flash back to original carrier rom... leave storage card out and flash again..
....
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
where can i find th original t-mobile 1.08 rom for the mda....
i cant seem to find it nowhere....
i had the same problem wen i was upgradin to wm6
I guess it does offend the moderators because I just posted the same question after searching and searching for weeks on resolution on this issue. They toasted my thread, probably this one too and I hope they don't because after reading 100+ posts on this topic, there was no resolution. Of course I tried without the SD card. I tried the 1.05 ROM as well as xenin's T-Mobile 2.26 ROM with built in CID unlock and both froze at 98%. By the way is your QTEK 9100 from the factory because mine is and I think this is the common denominator in this problem. Please someone help cause I'm probably new to this forum (not to howardforums) but I know my phone stuff so this is a real issue! Thanks in advance and pls do not delete this thread. Thanks.
sunycheeba416 said:
... T-Mobile 2.26 ROM with built in CID unlock ...
Click to expand...
Click to collapse
You better start re-reading the 100+ posts!
First of all your WIZ needs to be CID unlocked - a 'build-in' CID unlock in a ROM you're trying to flash will not help!
I understand that. That was my second way of trying to resolve it. I originally followed the "The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards" post and followed it word for word (and read all 36 pages). I tried flashing buttons 1.05 ROM (http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html) and got the 98%. The second time I thought I'd give it a shot and tried xenin's T-Mobile ROM with built-in CID and it froze at 98% too! My suspicion is that there is something different about factory phone than SP branded phones. Anyone else?
I also rebooted my PC and phone. Deleted all my session temp files. Tried 3 different computers. Tried without SD card. Everytime I it froze at 98% and had to revert back to the original QTEK 9100 ROM (2.17). And just for kicks I tried installing T-Mobile's original 2.26 ROM and it gave me a "vendor match" error, meaning it's still CID locked.
Umm, if you bought it straight from HTC/Qtek, wouldn't it already be unlocked? From your last post, it seems you do not have a branded or locked phone...
It is SIM unlocked which means I can use an SIM card. BUT it is not CID unlocked meaning that I can't flash the ROM to another maker's ROM (like QTEK to T-Mobile or QTEK to Cingular or QTEK to Custom ROM).
I wsa thinking that HTC and QTEK have tight bonds and was wondering if I can make the jump to an HTC ROM and CID unlock it from there. Not sure if that makes a difference. Kinda stuck
gildp said:
good day,
that I always try to make an update in the 9100 it stops to the 98%, restarts in the screen of tres colors.
I have IPL/SPL 1.xx
help !!!!!
Click to expand...
Click to collapse
You must flash a FULL carrier 2.xx rom before flashing any custom rom from this site (other than the ones used for CID unlocking)
You will have issues if you skip step 17 of the Definitive guide to Unlocking and Upgrading G3 Wizards (Sticky in this forum).
Related
Last Night I made a clean install of the 2.26 rom on my wizard and I have to say, overall peformance is way better than the previous roms ive used. On my previous roms, the highest speed I got up to when surfing the net was 79 kbps, with the 2.26 rom, ive got true edge speed going up to 155kbps. Service never drops, and its much much faster. Although I excluded all t-mobile customizations since they are really no use at all. I get 4 bars almost everywhere I go. Streaming radio audio never drops. So, for me this has been the best rom that Ive used. Finally T-mobile has done something appreciative.
I agree, having had two issues with the 1.08 ROM. First, Voice Speed Dial would lose its list about every five days and Speed Dial's list would become simultaneously corrupted, some items being recoverable, some not. I got so tired of re-creating the list I just quit using VSD. MS Voice Command is on order. Second, the handset speaker volume was too low even when at max volume.
I won't be using VSD again, but so far (two days) SD has not become corrupted. I'll be satisfied when a week passes without an incident. The handset speaker volume is improved, and I can now hear conversations in noisy atmospheres without as much straining.
I've also noticed that it is more stable, and faster. Overclocking at 240 makes the MDA run like my old Ipaq running at 400 mhz., and menus zip in and out, with programs loading faster. Soft resets are also faster.
In the past I've resisted loading new ROM's, but this time it seemed like the right time, especially with the hope those two issues would be fixed. I'd say I'm happy so far.
...
I just don't understand. I was using the old, custom 2.08 or something ROM and was doing just fine (other than it disconnecting sometimes)... and after upgrading to the 2.26 ROM, I can barely get any signal anywhere at all. I used to have four bars at home, now I'm lucky to get two and usually get one. Sometimes, I get zero and have to wait before making calls. This NEVER happened before.
Is there something I'm supposed to reset after upgrading my ROM? This just doesn't make any sense.
I will never learn. Everything was fine, except of course MS Voice Command & Bluetooth, on the ROM version my Wizard shipped with earlier in the year.
Friday I installed the T-Mobile 2.26 update, then reinstalled Goodlink. Fine, then Smartskey & RegistryWizard. Looking good, then Goodlink errored out. On a soft-reset, the Wizard hung at a Windows splash screen. Hard-reset, reinstalled Goodlink and Smartskey. Seeming fine for a while, installed MS Voice Command (skipping past the message about Microsoft being an unknown developer). Still ok, then a day later errored out again. A soft reset hangs the Wizard again at the Windows splash screen.
I'll try it now with just Goodlink.
is there anybody know how to install the rom only without the extended rom, as i need to keep my extended rom as it is.
ROM 2.26 on Dutch T-mobile MDA Vario
Hi people,
I wanted to know is it possible to install the 2.26 ROM on my Vario.
If I'm not mistaken the 2.26 ROM is the US version of the MDA Vario.
I'm currently using the MDA Vario Dutch OS. But would like to have the English OS.
Do I need to CID unlock and/or SIM unlock my device before attempting to install this ROM?
Is there any risk in attempting to install it without CID/SIM unlocking it.
Thanks in advance.
Shah
you probably can. im not really sure, but if its still the same phone provider, i dont think you have to cid/sim unlock the phone.
the US version should be fine...its runnig on my UK Vario
if you are running a v1 ROM (no push function) its worth CID and SIM unlocking now..cos at the moment there is no tool to do it on a v2 rom.
As long as your phone is a T-mobile, you dont need to CID unlock before upgrade, but if you wanted to use a QTEK/Imate rom, then you would
good luck..the upgrade is worth it
Thanks people for the quick response.
I will consider upgrading to the new rom.
But one last question is the language issue a problem for a ROM upgrade? I just want to be postive before going through with this venture.
Because T-mobile Netherlands give a 2 year warranty on the Vario, but if I install the new ROM even if it is the T-mobile (other country) ROM
my warranty will void (really stupid T-mobile)
and if the update fails for any reason. I will need to do some extra work for nothing.
Shah.
Update on Uk T-mobile Vario.
I cant get it to work on my vario. Comes up with "wrong vendor" error.
Please post a link or info for UK version please.
Thanks .
Re: Update on Uk T-mobile Vario.
Stu308 said:
I cant get it to work on my vario. Comes up with "wrong vendor" error.
Please post a link or info for UK version please.
Thanks .
Click to expand...
Click to collapse
You cannot install on a UK t-mobile wizard a USA t-mobile rom, even if they're both from t-mobile.
You must either:
- CID unlock your device if you're still using a 1.x rom (use lokiwiz 0.2b for the unlocking)
OR
- follow my tutorial to install the rom if you've got a 2.x rom (the tutorial is here: http://forum.xda-developers.com/viewtopic.php?t=56088 )
Bye
Thanks risidoro,
I will then try to unlock my 1.x ROM first and then update my ROM. I have interestingly followed other threads in this forum.
But I couldn't find any answer to the queston: When CID unlock in ROM 1.x is the device still unlocked when installing newer ROM 2.x?
In my case installing the US ROM 2.26 is it still unlocked??
EDIT: Reason is to find out if it might be possible to install or try other ROMs if I want to lateron.
Thanks in advance.
Shah
Shah2 said:
Thanks risidoro,
I will then try to unlock my 1.x ROM first and then update my ROM. I have interestingly followed other threads in this forum.
But I couldn't find any answer to the queston: When CID unlock in ROM 1.x is the device still unlocked when installing newer ROM 2.x?
In my case installing the US ROM 2.26 is it still unlocked??
EDIT: Reason is to find out if it might be possible to install or try other ROMs if I want to lateron.
Thanks in advance.
Shah
Click to expand...
Click to collapse
CID unlock is like death: you can have only one
[yes, CID unlock is sticky. Do it only once and it'll last forever, even if you go to 2.x]
Thanks Risidoro,
I'm gonna try the unlocking one of these days.
Just hope the US rom also corrects the errors in the ETEN dialer of PaulyA.
I think other language ROM aren't that compatible with the ETEN dialer.
Just love the phone dialer, only those stupid buttons (End button) that never becomes a Talk button.
Once again risidoro a lot of thanks.
Shah
lsnizzle said:
On my previous roms, the highest speed I got up to when surfing the net was 79 kbps, with the 2.26 rom, ive got true edge speed going up to 155kbps.
Click to expand...
Click to collapse
What are u using to test your edge speeds? i'm on 2.24 and would like to know what i'm surfing at. I tried a couple sites but they were giving me resulst of 6kbps and crap like that which is not true.
I use SPB GPRS Monitor to check the data rate. It works great, but it's not a freebie.
fone_fanatic said:
lsnizzle said:
On my previous roms, the highest speed I got up to when surfing the net was 79 kbps, with the 2.26 rom, ive got true edge speed going up to 155kbps.
Click to expand...
Click to collapse
What are u using to test your edge speeds? i'm on 2.24 and would like to know what i'm surfing at. I tried a couple sites but they were giving me resulst of 6kbps and crap like that which is not true.
Click to expand...
Click to collapse
I use this,
http://www.dslreports.com/mspeed?jisok=1
And this,
http://reviews.cnet.com/7004-7254_7-0.html
Hello guys, can this Pocket PC from cingular be unlocked? I just got it.
I am not sure if i have all the tools and know how to unlock this fone so i will continue to read & wait for help. Thanks
Dishxpert
search this board for lokwiz and take it from there, the search function works, please use it.
I'm in the same boat as him. I've been thinking of CID unlocking my phone for awhile. I have the 2.25 spl/ipl as well with a 2.25.11 rom. And as far as i can tell from reading threads, lokiwiz does not cid unlock this rom.
edit: I have tried looking alot for a way to CID unlock my phone. I get alot of conflicting and confusing information. Some people say to just downgrade my rom to one wiht a 1.xx spl/ipl. Others tell me that that is impossible to do in the first place. I've tried looking and i cant find any rom that has a 1.xx spl/ipl that would even install on my CID locked wizard. If this is indeed the way i and the thread starter are supposed to do it, then can you point me in the direction of a downgraded rom that will work with a CID locked cingular phone? I would be very gratefull.
taking the time to read some threads you would find that downgrading to a 1.xx rom and then doing the cid unlock and sim unlock would fix your problem... some people that say this dont work may be referring to a G4 wizard, one who's IPL/SPL is 2.xx.0001. And they are right, this does not work on a G4, only the G3, which if you are lacking the .0001 at the end of your IPL/SPL then you have a G3... all of this info can be found from searching and reading
I did read from a few sites and am not new to forums. The instructions i saw said there is nothing out for I.P 2.21 and above unless u pay and use JAFWM.
Shogun, prob as a senior member u can shed some light as more ? will be asked in days to come or make a sticky with the truth.
BTW, i do have lokiwiz2o and have used it to unlock MDAIII but not sure what works on mine & dont want to cause it to crash. Speak if u have the 'right' truth.
shogunmark said:
taking the time to read some threads you would find that downgrading to a 1.xx rom and then doing the cid unlock and sim unlock would fix your problem... some people that say this dont work may be referring to a G4 wizard, one who's IPL/SPL is 2.xx.0001. And they are right, this does not work on a G4, only the G3, which if you are lacking the .0001 at the end of your IPL/SPL then you have a G3... all of this info can be found from searching and reading
Click to expand...
Click to collapse
please re-read my above post, it gives you instructions.. what i forgot to mention though was after you donwgrade to do the unlock, you will need to upgrade to an official rom that will have the updated bootloaders(IPL/SPL) before you can flash someone's cooked rom (and i only say that cause not all of us chefs include the updated IPL/SPL's so that someone with a G4 doesnt brick their phone)
shogunmark said:
please re-read my above post, it gives you instructions.. what i forgot to mention though was after you donwgrade to do the unlock, you will need to upgrade to an official rom that will have the updated bootloaders(IPL/SPL) before you can flash someone's cooked rom (and i only say that cause not all of us chefs include the updated IPL/SPL's so that someone with a G4 doesnt brick their phone)
Click to expand...
Click to collapse
I know i have a G3 device. Are you saying that all i have to do is downgrade to a 1.xx ipl/spl rom. Run lokiwiz 2b. And then i can go directly to a cooked rom because i do not have a g4 device? Speciffically i would like to troy out molskie's 30mb free rom. And possibly yours as well.
k2snowboards88 said:
I know i have a G3 device. Are you saying that all i have to do is downgrade to a 1.xx ipl/spl rom. Run lokiwiz 2b. And then i can go directly to a cooked rom because i do not have a g4 device? Speciffically i would like to troy out molskie's 30mb free rom. And possibly yours as well.
Click to expand...
Click to collapse
well yes kinda, i added a part below that, it said you may want to flash an official rom since most cooked roms dont include the updated IPL/SPL..
Hi Guys...im no expert, and im kinda a noob at this. But this is what I did with my Cingular 8125. I have a G3 phone, SIM unlocked onle IPL/SPL 2.26. I've updated it with a Cingular standard ROM. I realized my phone was NOT CID unlocked, so I decided to try this step for step http://forum.xda-developers.com/showthread.php?t=263116&highlight=wizard+backup the important part i believe is downgrading the ROM, also, make sure you unzip the lokizwiz file in the ROOT of the C:\ drive, then open a command prompt and run it from there (assuming your running Windows). After that, I upgraded with a Tmobile Standard ROM to upgrade the IPL and SPL back to 2.26, then I installed this ROM http://forum.xda-developers.com/showthread.php?t=276700&highlight=cingular+8125 and it worked like a charm. Thats just from my personal experience, as I said im just a noob and not an expert. I hope that helps in some way.
My hats off to these people that create these custom ROM, THESE GUYS ARE GOOD ! ! !
Thanks to all the custom ROM makers out there.
hi im sorry if i ask a questian who already asked i guess.
Iv been searching for an answer but did not find any.
I´v tryed to update my rom on my qtek 9100 so i could get WM6 in to my device, but it´s always stops at 99% when im installing. so now when i turn the device om i just have the screen whit 3 diffrent coulors on, so pleace any one can you help me get WM6 in my device or else i have to jump on it and throw it in to the trash. Sorry for my poor english im an swedish idiot...
Best reegarde Andreas...
I presume that your phone is still SIM/CID locked.In order to get your phone upgraded to wm6,its required to have it CID unlocked first.
Which is your device, G3 or G4 ? Post IPL/SPL...?of the phone here,to determine the G3 or G4 version of the phone,cuz for CID unlocking,both have different methods.
Cheers!
Cant start it now... Im realy angry at that little thing now...
its all black in the display. Do you have any good thing to do about that?
got it started for just a 5sec then its blck again... done that about 3 times last houer but it want start...
When it gets like this is there no more to do other then throw it in the trach?
or is there hope , can i do like a hard reset or something?
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Andyswe said:
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Click to expand...
Click to collapse
Yes !
Its a G3,download the official stock rom of your carrier from its website,get the phone into bootloaders (multicolor screen),connect via usb cable,watch small usb appear at the bottom of the bootloader screen and run the RUU,let it complete and your phone will boot up to default status and then download WST tool and run the 'CID Action' button to verify the CID lock.unlock status.
But always get the battery charged before flashing.
Cheers!
Has installed the TNT rom now latest.
Hov do i get the HTC look whit a digital watch??
I assume you mean the HTC Touch clock. It's really a lot more than a digital clock.
Try this: http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html
which rom shall i use if i want a clean WM6 and install the htc Home plugin.?
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05
I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now
i dont know wheres to find the roms do you have a link or something
Have you CID unlocked yet?
Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...
Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.
my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one
mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!
Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.
About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.
As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......
Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!