Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
Related
First I want to say sorry!
I have troobles to understand how to install it on my French HTC P3300 .
Can I?
Could someone explain me how to?
Thanx,
Andy
traxer said:
First I want to say sorry! I have troobles to understand how to install it on my French HTC P3300 . Can I?
Could someone explain me how to?
Click to expand...
Click to collapse
Sorry for what? Normally it is not necessary to open a new threat for any question that you might have, just join the different threats about a particular subject.
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
grun said:
Sorry for what? Normally it is not necessary to open a new threat for any question that you might have, just join the different threats about a particular subject.
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
Click to expand...
Click to collapse
I got it, but can I know if the device is locked or not? Is there any kind of test or software that do this?
thanx in advance
Claudio
cfrs said:
I got it, but can I know if the device is locked or not? Is there any kind of test or software that do this?
Click to expand...
Click to collapse
Unfortunately, no, not really. On older HTC models you could find out by running the mtty tool, but it doesn't work on the Artemis. I read somewhere that on our device that whole locking (and unlocking) method is quite different than on other models. That is also why it seems so hard to develop a free unlock tool for the Artemis.
The only way you can be absolutely sure is by running the unlock tool from imei-check, but they will charge you for it.
If you just THINK that your device might be unlocked, then I would not recommend to try flashing any other than an official ROM. Of course, it is your choice and you might want to take the risk. That risk is that your phone will become 'bricked' and won't start normally. The only way out of that situation is returning it to the seller to have it restored. Some people with a bricked phone however are able to restore it themselves with the original ROM, so make sure that you have that ROM available. Some original ROMs can be found on the internet, but not all of them.
sorry but you said
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
But if i want flash in my artemis a rom like this one Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) how can i do that?
Ther are no exe file inside but only one similar with bat extension??
Can you help me please
Thank you
Andreazzo
andreazzo said:
sorry but you said
Upgrading itself can be pretty straightforward: just establish an ActiveSync connection, run the <ROM name>.exe from your pc and follow the instructions on your screen.
But if i want flash in my artemis a rom like this one Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) how can i do that?
Ther are no exe file inside but only one similar with bat extension??
Can you help me please
Thank you
Andreazzo
Click to expand...
Click to collapse
Just connect the USB, let activesync make the connection and start the BAT file in the dir of the rom... wait 30min
grun said:
I guess you are new to all this upgrading stuff. First of all, and most important, is to find out whether your device is cid-locked or not. I think that it is safe to say that when you got your device through a telephone provider, like Orange or T-Mobile, at a very cheap price, then the device is locked and you should have it unlocked before flashing any ROM (except the official ones that you can download from your providers site). When you bought your device retail, at the full price (the Artemis is sold around 500 euro's), then the device is not locked.
Click to expand...
Click to collapse
Andreazzo,
Your Artemis, does it have a logo on the body. A logo from maybe T-mobile, Orange, Vodafone, O2 or whatever telecom provider?
If yes, the you shouldn't flash your device with v2.00.02 PV for HTC Artemis ( Crossbow Style ), because the chances are that you will brick it.
If your P3300 only has the HTC logo, then it is fully unlocked and you can flash whatever rom (flavor) you want for the Artemis.
So be aware of the fact. The life of your P3300 is in your hands.
This it is not probably true information. This it is not to end rule
My Artemis he had only logo on body. The logo of start take-off was the only HTC also. No trace T Mobile Orange O2 Vodafone. And I have brick. :{
I tried flash by bootloader however still announcement INVALID ID
Follow for voice grun. get rid (remove) CID - will not it be dust brick as I.
Read this ... http://forum.xda-developers.com/showthread.php?t=306904
Can anyone link me to a page where I can find all HTC Artemis Roms
TalhaQasim said:
Can anyone link me to a page where I can find all HTC Artemis Roms
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
Is the SEARCH button broken today?
Hi guys...I know there have been numerous reports of this kind, but I can't seem to find the answer.
I don't have this problem myself, but another person does and I thought I'd ask Olipro and the rest of the community for some help and clarification. Also hoping this answer can help anyone else who has this issue.
OK, Someone tried to flash WM6 before using the Unlocker. I know...don't say it. Anyway they now have the black screen of death and the tri-coloured bootloader screen, but are still unable to flash WM6 and obviously cannot use the unlocker until they have an O/S to sync with.
Has anybody encountered this and received incorrect vendor ID and found a way out of this scenario? They have an Austrian T-Mobile Ameo UK, so they can't even use the T-Mob 005 ROM for the UK Ameo (which doesn't require the unlocking of ones device).
Any clues peeps? It would really help a fellow owner out. Cheers for any input. Remember even if you said it before and don't want to repeat yourself again, please just cpoy & paste the answer here so it can act as part of the wiki for future incidents of this nature.
Thanks friends.
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
royalmail said:
I got part of the experience. So I will tell what happen to mine AMEO.
due to some software conflict, my WM6 OS got kill. I was stuck in the tri-colour screen as well.
Since my unit was unlocked before, so refreshing (any) ROM solved my problem. (refreshing the ROM doesn't required activesyn running on yr PPC.)
If can't reflash yr ROM due to vendor_id error, I think the best way is to get the origin WM5 ROM (read it out from another same model) and flash it back.
after getting yr origin OS, then u can proceed unlocker and WM6 upgrade.
Hope this can help.
Click to expand...
Click to collapse
Thanks Royalmail. I'll pass it on.
Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami
Trying to recover a bricked g4 wizard stuck at the splash ( radio section reporting version at boot so assume it's not a CID / security area issue) and I can only find the shipped rom to try flashing via bootloader which it rejects as being too old.
Anyone got a rapidshare link for v2.21.4.101 please? Searching on the boards points to o2 and o2 in their infinite wisdom no longer host it, or rapidhsare with out of date files.
Thanks.
M.S
Mysterious Stranger said:
Trying to recover a bricked g4 wizard stuck at the splash ( radio section reporting version at boot so assume it's not a CID / security area issue) and I can only find the shipped rom to try flashing via bootloader which it rejects as being too old.
Anyone got a rapidshare link for v2.21.4.101 please? Searching on the boards points to o2 and o2 in their infinite wisdom no longer host it, or rapidhsare with out of date files.
Thanks.
M.S
Click to expand...
Click to collapse
What were you trying to do when this happened,were you trying to flash another rom ? which rom you were trying to flash ? what IPL/SPL it displays now.well if it gets into bootloaders its certainly not bricked.
You can download the official O2 v2.21.4.101 from here :-
http://www.megaupload.com/?d=BTSJK5C0
zabardast_1 said:
What were you trying to do when this happened,were you trying to flash another rom ? which rom you were trying to flash ? what IPL/SPL it displays now.well if it gets into bootloaders its certainly not bricked.
You can download the official O2 v2.21.4.101 from here :-
http://www.megaupload.com/?d=BTSJK5C0
Click to expand...
Click to collapse
Thanks. A collegue had tried wm6 and botched it so gave it to me to try to fix as 'i know about these phones' apparently ;-)
The only rom I could find from o2( unit isn't CID unlocked as it's a g4) to reflash with to try to recover gave the error' this update is too old for this device' etc as it was the launch rom.
Thanks, I'll post if the device recovers!
M.S
Sorted, thanks, has booted up fine with the update rom.
Thankyou.
M.S
Thanks !
Grrrrr8 you got it working
I haven't used my Touch HD in a very long time and when I turn it on now (dont remember what happened) it says upgrade ROM code error please try again. Does HTC have an upgrade for it? I live in the US and their site doesn't show anything about the phone, used europe site but gave me a no updates for that serial number. I am guessing that a stock ROM from HTC would fix this problem as the phone is not unlocked.
Shipped roms can be found here. Hope this helps.
If you receive "Upgrade ROM code error" then you will need to flash original stock rom which was on your device, i.e. not any stock rom but the original one. Your original stock rom should flash whether it says 'usb' or 'serial' at bottom of bootloader.
Link to stock roms has been provided in post above
Thanks
Thanks a lot, I haven't used that phone for probably a year so I hope that fixes it. I cannot wait to use that phone again, since I paid good money for it.
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
make007 said:
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
Click to expand...
Click to collapse
Did you follow this guide and put either USPL or HSPL on your device first?
Before flashing anything, its always best to read the stickies (thread stuck at top of each forum which provide guides, references etc). My advice would be to read this