So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
almost 50 views and no help
somebody please help me out
Goshdarn invalid vendor id
megagprime said:
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
Click to expand...
Click to collapse
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
ookba said:
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
Click to expand...
Click to collapse
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
sorry about the late reply
i have tried the willow spl (that was my original path)
didn't work can get my spl hard lol
still need help, i think she is bricked
i got the ceda100 boot loader up and cant flash willow or cedar hard spl.... or anything and it doesnt even boot up into windows or anything anymore possibly shes a nice shiny brick
ariesq said:
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
Click to expand...
Click to collapse
hey i got another snap and am ready to flash again but dont really want another paper weight, all i really need help with is usb tethering that doesnt use pam/let my carrier know i am tethered....
i need internet connection sharing like my snap needs a hard spl
different computer, cables, compatibility modes, etc
nothing works
My friend
i have the exact same problem
Bieng researching for the past few days, spent hours on this
Did u find a solution?
I could really use some help right now
Thanks
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose
Related
Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........
JTAG?
Why do you need to flash in this manner?
Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.
jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse
alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?
Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.
Thanks for the compliments
Glad to help.
So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind
Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................
Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.
Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........
let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.
Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........
So wait, did your phone worked in the end?
Yes its done man & thanks to u tooooooooooo
Great to hear that.
If you have any more issues, hit us back again
well I think I misread the threads. I understood that since my htc was unlocked that I could flash a spanish rom to it and I went ahead and flashed it it is a cingular 8125 well after the flash ended now the htc8125 only turns on in the three color screen and it says.
IPL 2.25.0001
SPL 2.25.0001
what I am supposed to to now is my phone bricked. help please.
Well you should flash your phone with this "ROM" and then do some more reading.
thank you myhtc but will this get my phone working again or can you please point me in the right direction. Also I can not download from the link that you posted can you upload it somewhere else please.
Reflash using the wizard love rom. You might have trouble finding it if the link I have included is dead. Thats the only sure way. And make SURE your battery is full or at least 75% when you do this.
http://rapidshare.com/files/23763082/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
i was finally able to download wizard love how do I use even though the wizard turns on it seems like it dont want to connect using active synch what am supposed to do
Well after trying and doing a lot of reading and with the help of some members from this forum got my htc working again and got a spanish rom too.:d this is what i had to do
flash my device using the wizard love rom
flash my device with hard spl
and finally flash the spanish rom
thanks a lot forum.:d
Ouch - after trying to SSPL my phone, it doesn't boot anymore. It's a T-Mobile branded Leo which doesnt allow to flash original HTC ROMs.
Now I need to try a T-Mob version. Anybody Can provide one ?
Thanks !
have you tried downloading an official rom from HTC with your phone's serial number?
http://www.htc.com/europe/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Thanks for the tip, but: Sorry, this software download is not suitable for your device.
Anyone who has a T-Mob ROM from somewhere ?
Thanks!
try a gold card solution...i also got a t-mobile hd2 i sued gold card to upto 1.6 rom...its working good...
Hello Matmax,
I had the same Problem, but you can try a Hardreset.
Turn your LEO off ( Battery out and in)
Press Volume up and down together
and turn HD2 on.
I had to try several times.
There is no official T-Mobile ROM to download.
New T-Mobile ROM comes out next week in Germany (They said)
http://www.t-mobile.de/meinhandy/1,14091,19349-_,00.html
Regads
Hammermade
http://rapidshare.com/files/3253914...dio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe
UK T-Mobile rom I saw posted last week.
So, flashing roms using sspl does not work with this type of t mobile branded leo?
For me it seems so :-(
I tried several hard resets, doesn't help. Thnanks also for the UK stock ROM, but that gives me another INVALID VENDER ID
Matmax said:
For me it seems so :-(
I tried several hard resets, doesn't help. Thnanks also for the UK stock ROM, but that gives me another INVALID VENDER ID
Click to expand...
Click to collapse
i think u must post ur problem in sticked Bepe thread, may he has the help.
Auch!! I am also searching for a suitable T mobile rom (UK) for my leo, but could't find any, yet...
P.S.:I planned to flash another rom using new sspl, but after reading your post I think I will wait a bit more... (If someone would not give a different feedback...)
I think your best bet is to go for the GoldCard method, although it would be nice if someone could host the T-Mobile rom on a site other than rapidshare.
GC method worked on my UK T-Mobile HD2...
0Reefa said:
I think your best bet is to go for the GoldCard method, although it would be nice if someone could host the T-Mobile rom on a site other than rapidshare.
GC method worked on my UK T-Mobile HD2...
Click to expand...
Click to collapse
Thanks for the tipp, but with a dead phone, Goldcard doesn'T help much
Matmax said:
Thanks for the tipp, but with a dead phone, Goldcard doesn'T help much
Click to expand...
Click to collapse
Post in the Bepe thread or PM him for help. Either way it would be useful for all of us to understand from him and you what went wrong and to fix it so other people don't have the same problem.
WB
Can you get to the boot loader screen? Pressing down on vol and powering on...?
0Reefa said:
Can you get to the boot loader screen? Pressing down on vol and powering on...?
Click to expand...
Click to collapse
Yes - but don't have a ROM I can flash (T-Mobile Germany).
Hard reset - works fine
Boot loader - works fine
Boot - stops after the versions of radio etc. is shown (red numbers on black screen)
Cavallipurosangue said:
Auch!! I am also searching for a suitable T mobile rom (UK) for my leo, but could't find any, yet...
P.S.:I planned to flash another rom using new sspl, but after reading your post I think I will wait a bit more... (If someone would not give a different feedback...)
Click to expand...
Click to collapse
I have T-mobile HD2 and sspl works fine. I am on my 3rd rom now.
T-MOBILE USA
http://www.actualitemobile.com/forum/index.php/topic,13335.msg214232.html#msg214232
Matmax said:
Yes - but don't have a ROM I can flash (T-Mobile Germany).
Hard reset - works fine
Boot loader - works fine
Boot - stops after the versions of radio etc. is shown (red numbers on black screen)
Click to expand...
Click to collapse
Hi
Re try Using SSPL and the custom rom it will flash from boot loader.
I had the problem first time using SSPL it crashes and stayed at bootloader. Every time fails You disconnect the cable and reconnect, Then re tried several time running SSPL with IT2 rom and 3rd or fourth attempt it worked. If not UK 1.48 version will work on T mobile uk.
Good luck
T-Mobile UK ROM
Hi try downloading this one from my 4Shared account. I don't think that it's the fastest link but it may help you out of a hole....
http://www.4shared.com/file/183376263/fc9b664b/RUU_Leo_TMO_UK_1431102_Radio_S.html
I too have a T-Mobile HD2 and was about to flash the new Miri ROM until I saw your post. Now a tad nervous about doing so......
Mat, before you tried to SSPL flash your Leo did you have a stock T-Mob rom or had you already GoldCarded to a new release rom?
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Hi,
have you flashed a new ROM before ?
In this case its a Radio Problem -try to update to (min) version 2.10. 50.08_2
http://forum.xda-developers.com/showthread.php?t=611787
good luck
I have installed the new Flash from the offical HTC HD2 site but that was with the installler.
Do these work the same way??
Greets
Ben
you have to do a HardSPL before -than you can flash Radios via the SDcard-method and via CostumRUU (like the Installer from HTC)
read this TUT for futher questions:
http://forum.xda-developers.com/showthread.php?t=609477
Rupesh
bdiepeveen said:
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Click to expand...
Click to collapse
===================
Hi Friend,
I also had the same problem, i took it to HTC Service center and found problem in the motherboard, they replaced the motherboard and its working fine from me. (my device is under warranty )
bdiepeveen said:
The problem with my HD2 is that when i start it the screen stays white.
Click to expand...
Click to collapse
usually happens when you flash a cooked rom that needs a different radio.
I can do a hard reset and even do a factory reset.
Click to expand...
Click to collapse
factory and hard reset are the same thing.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
Click to expand...
Click to collapse
red white and blue is 'bootloader'.
So, boot to bootloader, see what it says next to spl.
it says SPL-1.66.0000 XE
What can i do with that??
(Sorry for the obvious noob questions i'm new to the HTC HD2)
*************
Update :
oke i've gotten a bit further now.
I've installed HSPL
So now i must use a ROM suitable for my phone correct??
Agian sorry for the obvious question
**************
Update:
For some reason it booted fully ,
got the screen white screen with HTC then my provider screen that took a while then the screen turns black.
*remove please*
well i've manged to install HSPL,
and installed a ROM.
now the rom starts up but it shuts down after passing the HTC screen.
Rom i installed is Artemis NLD
I tried rebooting then i get the windows screen wich keeps on for a long while nothing happends
I have no idea what to do next
what radio do you have exactly?
and do you mean THIS rom?
thxx all..
samsamuel said:
what radio do you have exactly?
and do you mean THIS rom?
Click to expand...
Click to collapse
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
bdiepeveen said:
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
Click to expand...
Click to collapse
when the phone tries to start, do you get the small writing, bottom left?
there are three lines, one is the radio (i think the 'r' one, but im not sure, lol)
if you arent sure, you can always pick a radio from the ROM thread, he mentions three or four he tests with, get one of them and flash it from bootloader.
Hard reset dude....
Good luck...
oke my Radio rom is:
2.07.51.22.~2
So i need to flash the radio rom to a newer version?
I've got it working agian
I took the following :
Leo_RADIO_15.37.50.07U_2.10. 50.08_2
Atermis Rom
And now its working again
Thanks for all the assistance.
Just a quick question tough,
Wich rom would you advise??
glad its working. i won't recommend a rom,i recommend you try a few and see what works best for you.
Hi All,
i installed HSPL2 2.8.0000 i think and i installed Kumar ROM. after a week i installed non tmobile ROM and my phone is dead. it does not show the phone is charging and it does not turn on at all. i try Volume + Power and nothing happens. if i get a replacement phone from tmobile, do you guys think they can find out what went with this phone ? can they hold me any legal terms ? what worst can happen if they find out ?
thanks
I work for tmo customer care and the worst case scenario is that you'll be charged a $100 out of warranty fee as the issue was caused by human error not the manufacturer. As far as I am aware there are no legal ramifications. Just call and say your phone won't turn on and you don't know why. They will run you through all the troubleshooting, just make them understand the issue is NOT with your battery or charger as they may want to replace those first if they believe its a power issue.
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
thank you all.
you guys are the best...
Bricked my tmous HD2
samsamuel said:
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
Click to expand...
Click to collapse
Hi there all,
Just want to confirm one thing as I have read over 100 posts and did not find a clear answer.
So I bricked my TMOUS HTC HD2 and I Have tried all ways to get into bootloader, but no luck (v. down + power) like a million times and every time I hook the phone to the PC i get the Qualcomm Diagnostics interface 3197 com port.
These where the steps I did before it got bricked:
1- Flashed using HSPL3 to 2.08.HSPL from SPL 2.08.0000
2- To change language I Installed the following ROM (_HTC HD2_RUU_Leo_HTC_ARA_1.66.415.4_Radio_Signed_15.30. 50.07U_2.06.51.07_Ship)
3- Got a message that phone was successfully flashed with the new ROM.
4- Phone got shutdown and bricked/dead
These are my phone details before I did any of the above as I saved them before I did anything in case of any damage and forgot to investigate radio issues hehehehehe:
Rom Version: 2.10.531.1 (82076) WWE
Rom Date:02/22/10
Manila Version:2.5.20121412.1
OS Version:5.2.21889 (21889.5.0.87)
Radio Version:2.08.50.08_2
After all the posts I read, I understand that my mistake was that I flashed My tmous HD2 with a .51 radio and that's the cause for the phone to brick.
My question is:
is it possible in any way for me or a tmous service center to enter into bootloader mood using any means. if no than I'm verrrrry happy cuz they will never be able to see the HSPL I flashed.
I would appreciate your confirmation. I know you mentioned it above that they can't, but just wanted to confirm before i send it to them.
Thanks to all the help we get from everyone here. Keep up the good work
***we live and learn***
Yes. Your situation is exactly the same as the OPs. Youre ok. Send it in. Get a new one.
help!!!!!
so i think i just bricked mt hd2, i was flashing the radio rom and now the phone wont do anything......
i was trying to find a radio that worked with android.
the Fing part is that this is the replace phone i just got in and now if i call back to tmobile will they be able to see what i did to the phone, cause they will press charges for misleading info
so plz help with any info
email- [email protected]
thanks
send it in and get another one!
yeah i bricked my hd2 tmobile usa as well. I went to install HSPL again after i took it off and it went trough fine then it crashed. I'm waiting for a new 1 to arrive soon then i will send mine back and hope they cant get into anything. Nothing comes on the screen no lights at all, so i hope i can by pass
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
MLowed said:
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
there is no such thing as a unbrick unless u send your phone to a expert who can do it them selves which you can search for in the forums
ok i have HTC HD2 512 don't know how many versions out there!(just know mine was somthings to do with asian one!) i flashed radio with Radio_Leo_2.15.50.14 and it went till 99% and stucked!i can get to bootloader screen but not be able to unbrick it! funny thing is after puling out my battry for about an houre magldr loads!
i followed forum.xda-developers.com/showthread.php?t=668347 but no nothin!
i want to bye jtag! any tutorial on how to use jtag to fix bricked hd2? or any idea on how to unbrick it without jtag?
thanks