Related
Please help me out a little, I am rather new at XDA development.
I'm developing an embedded application for GPS/GSM vehicle tracking, so there is this app which autoanswers GSM data calls, and provides access for software on the operator pc, so it can read the vehicle's position when needed. I have a problem with cprog.exe and the OS in general - it's getting in the way. I need to do the following:
a) Put a logo in the bootloader, so when it boots it needs to show a picture and some text
b) Somehow disable cprog.exe gsm phone app, detach it from the green button etc... but I still need the GSM to be operative and come up (I disabled the pin on the sim card). I don't want any announcements of any kind, just that it register to network and can recieve data calls.
c) To remove the ugly start button and the upper status line, so that nothing else can be run besides my program. I have put the program in startup but am wondering is there a more suitable way to run it... I don't need the today screen or any other **** OS provides, just the GSM data functionality and the application running. How do I strip down the OS and loose all the unnecessary features?
Thanks for your kind help in advance,
Mirko
p.s. Oh yes, the device is a T-Mobile MDA ARM SA1110/206, PW10A2, ROM 3.16.48, Radio 3.19.00, Protocol ver 32S54
My smart dialing is not functioning...I have the 'Smart Dialing Options' item on my Phone Menu, but it doesn't bring up the options screen.
Is this because I did a soft reset during initial setup (to prevent all the o2 customisation)?
If so - am I missing anything else?
That's almost certainly the reason. I lost smartdialler when I stopped the ExtROM loading on my JasJar. (I was happy about that though!)
Unfortunately I also lost the i-mate phone dialler skin and with it, the ability to make video calls. And the MMS section of messaging didn't work properly either! I think some of the other cab's in the ExtROM are patches etc, so it's probably advisable to let it run...
hi,if you go through the cabs installing 1 after another you will find both the skin and the smart dialler,i have bits of the o2 rom and bits of the tmobile rom on my exec because i have a tmobile sim.ENABLE-VT-RTPLUGIN-0727-2-SIGNED.CAB seems to be these
It would be may be good to create a list of known bugs and other problems with the WM6 ROM for Typhoon. Please post here if you know about some bugs or strange behaviour.
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
lot of software incompability, mostly games,
-bug tcmp looks like the same most games have; there is sound but the screen will freeze in a few seconds (sound continues )
..tried to add T9 language according to instructions described at Ronswens pages for WM5. During writing sms I can choose the new language, but after choosing it only beep occurs when pressing a key. I suppose there should be changed also some another key in registry...do we have some experiences already with the T9 languages on this WM6 rom?
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
I have this problem too and I back to wm2k3
r0c0 said:
lot of software incompability, mostly games,
Click to expand...
Click to collapse
I have found the decision:
1)
We open "exe" a file with game in any HEX-editor, we find gx.dll and it is replaced on g0.dll
We clean the signature from a file by means of SignRemv and it is done new by means of Signed tool
To place the changed file back, and a file g0.dll to place in folder Windows
or 2) To replace a file gx.dll in folder Windows, in any a file-manager to put "read only" and restart (there can be problems with other programs)
As example Bustem
PS: forgive for my bad English
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
how do you make application unlock on wm6 ?
Java
is there Java support with this WM6 ROM? I can't seem to find it. Very useful for Opera Mini and Gmail standalone app.
sebip said:
how do you make application unlock on wm6 ?
Click to expand...
Click to collapse
Use regeditSTG2.exe to modify the following phone registry keys:
- HKEY_LOCAL_MACHINE\Security\Policies\Policies0001001 = 1 (that will enable the rapi_config, 1 means full access to rapi config, 2 means user controlled access)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001005 = 40 (that disallows the check for security cirtificate etc)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001017 = 144
Run SDA_ApplicationUnlock.exe from the PC with the phone connected via ActiveSync. This will unlock the phone.
Disconnect and switch the phone off then back on again.
Hi,
I can't use voice talk (via handset bluetooth) before in wm2k3 and wm5 i have the fonction to add voice command with contact, but now no.
It is normal ?
Thx.
...I also revealed interresting behaviour when you are trying to connect to internet via GPRS. There sometimes occurrs error message that it couldnt be established GPRS connection because of missing GPRS coverage. (the "G" is also missing in homescren icon bar). But I am sure there is no GPRS coverage problem in my location.
So in this case you have to go into the phone settings and choose your network again. Afterwards when you are re-registerd in your network, the symbol G is present in iconbar and you can run the GPRS connection. Sometimes prolongomenous procedure...
I had pretty much the same thing as a few of the others.
Xphone11
WM5 - WM6
It flashed all ok, the phone booted all good and worked fine - but then after around 15 min of running, reciving one call and 3 failed attempts at sycning it died.
Well - actually, I re-booted it for something and it never came right after that.
These are the issues which appeared;
Contacts wouldn't open (yet the proccess was fired),
Calendar threw a 'missing file' error,
Start menu wouldn't work (no response from the button),
GPRS service was dropped ("no service available" - even though there was and the phone could see it if you seeked for it),
Yet the phone recived text messages while in this state and while calling the phone it just wouldn't do anything - yet to the caller it would appear to just ring and ring (not a provided service).
An interesting thing - I found that by making a change to the home screen or theme would allow the start menu too function as it should and the the clock to be displayed on the home screen.
Could be an area worth investigating....
I've had a taste now.... I want WM6!!!
What can I do to help?
...it also would be interresting to know whether there is a possibility to run the USB modem - I couldnt find it in start menu/accesories nor in the windows folder...
How to install for QTEK 8020 (T-Mobile SDA) joystick? please help... fuctional joystick in WM06 (my english low sorry)... right is up, left is down and left not functional and right... ???
///... please delete topic... ///
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
DoctorT said:
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
Click to expand...
Click to collapse
Because WM6 for Typhoon Error on Dumprom.
WM6 looks fantastic, however...
I also have a few disappointments the most important of which are:
- No "Headset" option in the profiles menu!!!
- No STK menu!!!
- Very easily crashing on games and some progs (hope to fix it as stated above)
and the camera is definately worse than in 2003SE
..various language t9 cab files - I tried it and it works fine on WM6
http://melgurth.ovh.org/
do anyone try the standard calculator in wm6 ? It show error in my c500 so I have to use other calculator program
..it looks that my calculator works properly...
I am hoping that someone here will be able to solve my problem:
I have an Orange SPVM700 (Trinity) WM5 with the original Orange Rom. The first thing I did when I got this device was install the HTC Phone Pad SIP. After a number of painful trial and error attempts I was able to use this SIP by using G4 SIP by setting Phone Pad as the default SIP in the G4 SIP control panel, and also within the G4 sip start-up application..
However, try as I might, I can not use any other SIP application, such as PCM Keyboard (v0.2), Teksoft Finger Keyboard, TenGo, RescoKeyboard, etc.).
Anytime I try to activate one of these alternative SIPs, my Trinity displays whatever the default SIP is set to (as set in G4 SIP control panel app). I can either set the default to "Keyboard" or "PhonePad". If I set any other SIP as default (in the system control Panel), I get a White Screen of death and a Hard Reset.
Does anyone have any experience of using an alternative SIP (other than WM Standard SIPs or PhonePad) with an Orange M700 Trinity?
Glad i am not the only one having this issue, i have tried and failed to get any alternative SIP working,
http://forum.xda-developers.com/showthread.php?t=322108. Post #5
Any advice would be welcome, i have tried soft resets after changing the SIP in the messaging client, soft resets after changing via the Start - settings - Input route and all to no avail.
O.K. Finally managed to work out a solution to this problem......upgrade to WM6.
I installed AX3L's Rom - AX3L_WM6_WWE_v2.0.8.2 and every thing is now great. I can use any SIP I like, the Trinity runs much faster, and the new radio performs better. I recommend you follow this route.
Also, if you need to roll back to WM5, there is a version of the Orange M700 rom kicking around for you to restore to should you need to return or anything.
For those that don't/can't go to WM6 here is a link to a working solution for WM5
http://forum.xda-developers.com/showthread.php?p=1444312&posted=1#post1444312
Another victim of "not enough driver memory" problem. It has been answered before.
You may want to try remove unneeded startup drivers/services/autorun and/or kill some running stuff in the background (READ: cprog.exe). That might solve your problems.
Yes, upgrade to WM6 may work too, since it is better in managing driver memory.
THIS THREAD WILL NOT BE UPDATED ANYMORE, FOR NEWS CHECK HERE
1. Displaying Japanese text
2. Japanese Advanced IME
3. SoftBank MMS
Fantastic job．I try it at once．
Oh wow... This is awesome stuff... Do you mean i can put the Softbank IME on my WWE ROM? I am just uninstalling my other Japanese enabling software so i can try it out right now (Even though its 2:30am and i have to work tomorrow...)
Perfect!
I now have my ultimate phone!
Ok well maybe if the battery would last a full day, but i am willing to accept that because now i have a proper Japanese input and access to Kaomoji
THANKYOU!
Edit: at 3am its hard to think straight and easy to get excited Any way to fix up the fact that the compact qwerty no longer works (only enters numerics, no alphabet), and proper T9 using the phonepad SIP? I assume thats the result of installing LetsJapan?
Also, are Emoji removed intentionally, or disabled for some reason?
Still very grateful by the way!
Please see the flinx1 thread for Japanese input for more information about the T9 bug:
http://forum.xda-developers.com/showthread.php?t=445550
It has to do with how LetsJapan sets all keyboards to 411 (Japanese), while T9 requires 409 (English) to work properly. You can revert the registry settings to 409+411 (see thread above), but you need to use the Ctrl+Shift shortcut to switch between keyboards (similar to Alt+Shift on Windows).
Emoji will require a special font, or HTML rendering provided by S!Mail. Are you perhaps referring to kaomoji? If so, kaomoji requires dictionaries to be updated/installed. Those will depend on what IME you're using: standard MS IME (LetsJapan), ATOK, WNN, or FSKAREN. I'm not sure which the Softbank SIP uses (usually ATOK or WNN), but only MS IME is free to distribute; the rest are commercial products and it would not be okay to redistribute them.
The files above included the kaomoji so thats pretty cool, but the emoji (bitmap smileys) are not enabled. But i am pretty sure you are correct about it requiring HTML rendering or something like that... Probably if the SB MMS cab was installed it could be used, but then i couldnt use MMS here in Australia anymore.
Edit: Tried some of the registry suggestions in that thread (not that any of them were very clearly described), and nothing enables the T9/Compact qwerty keyboard again. As an FYI, prior to installing this IME, i was using flinkx1's cabs; installed directly without any other changes, and i had the same problem. I then uninstalled everything before trying this solution
Hate to sound like a noob (ok well i am), but is there any way to keep the original Touch T9 + Compact Qwerty functionality as well as the Keytouch SIP?
Yeah; Japanese phones use a basic HTML renderer to display emoji in their MMS (with the emoji images cached on the phone). The previous solution was to use MMSLite which used a special dingbats font and (afaik) would parse the HTML in the MMS and return text that used the dingbats. Crude but effective, although the emoji font was of course only black&white.
S!Mail should provide proper image-based emoji, but you may be right that it might not work with existing MMS services. Then again, it's possible S!Mail simply runs as a separate program/process and does not change existing MMS settings. But I have no firsthand experience so hopefully someone else can provide more information.
Getting T9+JPIME to work together is going to be difficult and will probably be different from person to person, because not everyone will be using the same kinds of SIPs and the registry settings might differ. However, I looked at the Keytouch CAB and there are a couple keys that are overwriting other settings that might cause T9 to become disabled:
HKCU\ControlPanel\Sip
DefaultIm = {9BBD6249-34B4-4cfe-934A-1F0607FB1D5C} sets Keytouch as default SIP
Use {62B00599-25D2-4e09-8C48-03BF26DB8517} for Compact QWERTY
HKCU\keyboard layout\Preload
@ = e0010411 sets JP as the default input method
Use e0010409 for English/T9; You may also need to change or switch the settings in Preload\1 and Preload\2 accordingly.
There are also some settings in HKLM, although I think changing them will cause Keytouch to not work. Of course, it's also possible that using Keytouch will disable T9 regardless of the settings, so there's no way to know for sure if T9+JPIME is possible until people do some further testing.
I thought I had responded already... Anyway, I do know that on the Softbank 705NK (AKA Nokia N73), S!Mail is implemented as regular MMS. Emoji are displayed as part of the font, and it is possible to enable Emoji in all areas of the phone with a bit of a tweak. My 705NK was sim-unlocked, and I was able to use MMS here in Australia just by setting the MMS server details
So I suspect the X04HT S!Mail client can also be used here; but only if you have access to the server settings
Now, I tried setting the region coding settings, but as expected, this broke the TouchKey SIP (well the SIP worked, but it couldn’t insert the Japanese characters into the message). Now I have another idea... If I install TouchPal SIP will that work together with TouchKey? I hear that TouchPal is supposed to be an amazingly good input system anyway...
Edit: This seems to be the solution. Touchpal works fine with Japanese region settings, and its arguably a better keyboard anyway...
fhsieh said:
Please see the flinx1 thread for Japanese input for more information about the T9 bug:
http://forum.xda-developers.com/showthread.php?t=445550
It has to do with how LetsJapan sets all keyboards to 411 (Japanese), while T9 requires 409 (English) to work properly. You can revert the registry settings to 409+411 (see thread above), but you need to use the Ctrl+Shift shortcut to switch between keyboards (similar to Alt+Shift on Windows).
Emoji will require a special font, or HTML rendering provided by S!Mail. Are you perhaps referring to kaomoji? If so, kaomoji requires dictionaries to be updated/installed. Those will depend on what IME you're using: standard MS IME (LetsJapan), ATOK, WNN, or FSKAREN. I'm not sure which the Softbank SIP uses (usually ATOK or WNN), but only MS IME is free to distribute; the rest are commercial products and it would not be okay to redistribute them.
Click to expand...
Click to collapse
The problem with the flinx1 package is that while it works for displaying Japanese it does not always work with getting the IME installed correctly. I tend to change roms almost daily but I keep my flinx pack in my nand memory so I can just reinstall at a whim.
Problem is, you can't use the flinx package with the default qwerty input from HTC. You must install a separate IME. I have been using spb keyboard as it has a quick switch to Japanese. But for some reason, as of late, I have been unable to get Japanese input working with spb keyboard without going in to the full screen keyboard option. Of course zgembo's isn't offering IME with the qwerty input but it is offering a reliable input method; something I have been without for far too long.
When I finish at work, I will give zgembo's a shot. Looks like big shoes to fill. I also need to get my Softbank MMS working. I have set up a gmail account with smtp but it's a pain when you mail to phones and they are set up to block internet mail. I would love to go back to my @softbank.ne.jp account.
@zgembo
I am staying tuned, bud. I have set up my mail correctly before by following an fc2 blog but I noticed that after a few messages or if the message has emoji or an attachment, I get the evil "unable to decode header" error. What app will you base the work on? MMS Lite, arcsoft, other, self created?
hate to nitpick
if possible, would you be able to edit your first post and change X04HT and X05HT to 'X05HT and X04HT'? Just so that it's parallel with the line before it (Raphael and Diamond phones).
Kev, do you have the SB ROM on your TD? Do you have access to the MMS settings like on the WWE versions (Servers etc?)
The IME put up by ZGembo is awesome. I am already typing Japanese quicker than i was on my 705NK, and Kaomoji is a nice bonus. English is a bit more difficult than a normal Phonepad input system, but its *exactly* the same as normal Japanese keitai's with the benefit of word prediction (the bit that is the same is that each letter doesnt 'time out' so if you want to type "back" you press 2 twice, then right d-pad or a long press of the 'キャッチ' button to move on so you can press 2 once for 'a' and then again so you can press it 3 times for 'c').
DominikB said:
Kev, do you have the SB ROM on your TD? Do you have access to the MMS settings like on the WWE versions (Servers etc?)
The IME put up by ZGembo is awesome. I am already typing Japanese quicker than i was on my 705NK, and Kaomoji is a nice bonus. English is a bit more difficult than a normal Phonepad input system, but its *exactly* the same as normal Japanese keitai's with the benefit of word prediction (the bit that is the same is that each letter doesnt 'time out' so if you want to type "back" you press 2 twice, then right d-pad or a long press of the 'キャッチ' button to move on so you can press 2 once for 'a' and then again so you can press it 3 times for 'c').
Click to expand...
Click to collapse
Dom,
I currently have ITJE's TouchIT on my Diamond. It's a really nice rom. I got S!Mail working on WWE before but it was such a hassle I gave up. I just got home now and am in the process of uninstalling what's on my device now and uploading both of zgembo's files to rapidshare. I will PM it to zgembo and it will be up to him/her to post it.
I want to give the gesture entry a try for JP input. Can you use the same SIP for both IMEs?
I noticed that the letsjapan screws up the date in TF3D on the home screen (top left). I assume this is because the WWE rom lacks the japanese TF3D files. If you change your region to English (USA; or other English) your date will be fixed and magically the JP input still works great with prediction.
Zgembo, all your work finally paid off! Nice job!
Zgembo said:
2. Japanese Advanced IME
This is a new thing. It enables word prediction input in both English and Japanese, and unlike traditional WM5 & WM6 Japanese IME engines, SoftBank introduced this third party IME (Omron mobile wnn v2?) and integrated into its newer ROMs. After installation, KeyTouch IME will become default. It only works in portrait mode, and in the case of landscape mode, IME will change to classic romaji or kana input. Kensaku and Tegaki IMEs are included. Also, settings for Japanese keyboard layout are in this CAB, so if you are using some different layout, you are on your own (there are plenty of posts around which explain how to change this). This CAB is only for VGA (480x640) devices (Planning to make QVGA version too, stay tuned)
Click to expand...
Click to collapse
Doesn't this violate their copyright? it's not supposed to redistribute itself nor is a default Japanese IME for Windows Mobile from Microsoft. but Softbank just paid money to Omron to ship it in their product. it's a kind of a proprietary software.
Kevbodian said:
I noticed that the letsjapan screws up the date in TF3D on the home screen (top left). I assume this is because the WWE rom lacks the japanese TF3D files. If you change your region to English (USA; or other English) your date will be fixed and magically the JP input still works great with prediction.
Zgembo, all your work finally paid off! Nice job!
Click to expand...
Click to collapse
Messes up how? (screenshot?)
All the WWE ROMs I've used come with MUIs for all languages (including Japanese). My guess is that LetsJapan is modifying the LCIDs (HKLM\nls) so that any non-ANSI Japanese programs can default to the corresponding codepage. TF3D will change accordingly, usually to 2009年02月18日 format (but that isn't exactly "screwed up"). You can of course customize regional settings (Settings > System > Regional > Date), and switch to English/西暦(英語) in order to change date localization back to English (for TF3D and other apps) while still keeping the device on the Japanese LCID/codepage.
Of course, I certainly haven't used every ROM so it's possible some chefs have removed all non-English TF3D MUIs, but you can't really blame that on LetsJapan.
fhsieh said:
Messes up how? (screenshot?)
All the WWE ROMs I've used come with MUIs for all languages (including Japanese). My guess is that LetsJapan is modifying the LCIDs (HKLM\nls) so that any non-ANSI Japanese programs can default to the corresponding codepage. TF3D will change accordingly, usually to 2009年02月18日 format (but that isn't exactly "screwed up"). You can of course customize regional settings (Settings > System > Regional > Date), and switch to English/西暦(英語) in order to change date localization back to English (for TF3D and other apps) while still keeping the device on the Japanese LCID/codepage.
Of course, I certainly haven't used every ROM so it's possible some chefs have removed all non-English TF3D MUIs, but you can't really blame that on LetsJapan.
Click to expand...
Click to collapse
Well, let's see. Flinx's pack doesnt do anything to the date display on the home tab of TF3D whereas every version of Lets I have tried, does. Flinx released a compatibility patch that is optional for his pack; once installed, it does the same thing to the date.
The thing that was happening to my date is like this:
Instead of saying: Feb 18, 2009, it would just change to 2 18, 2009. Again, this was easily fixed by going back to the English USA region. I did not claim that letsjapan screwed up anything that wasn't easily fixable by touching the screen a few times in the right places, nor was my remark about "nice job" in any kind of sarcastic tone. I wouldn't say I was placing blame anywhere.
As for the date thing... it's happened to me in every single WWE rom that I have tried installing LetsJapan on to. Again, this is fixed by changing the region or by installing TF3D tweak and setting the TF3D to japanese language altogether.
I have part 1 and 2 of zgembo's first post installed and all I can say is... fantastic.
The LCID keys that are included in the LetsJapan packs and in the optional flinx1 compatability patch are what cause TF3D (and any other app that relies on Regional Settings) to change the date format. It's a side effect, to be sure, and it will happen with all WWE roms, but it's not because LetsJapan (or the patch) are specifically affecting TF3D, nor is it because TF3D is missing 0411 MUIs.
I guess it's a choice of words; when you originally said "screws up the date in TF3D", I had imagined the date was somehow corrupted or illegible, and not simply a format change according to the LCIDs (which is normal).
At any rate it's amazing that WM, any windows for any system, is where it is now (just about 6.5) and IME is still such a pain in the ass. Why can't an OS just support this stuff without having to tweak so many little nooks and crannies. I just love the way the SIP that comes with our diamonds is simply incompatible with more than one IME.
Hi, I am new to all these stuff...
Is it possible to do with HTC S740 notouch model?
HTC: http://www.htc.com/europe/product/s740/overview.html
I wan enable Japanese read/write both Land/Potrait mode and how to turn on and off IME?
And also Softbank SMS/MMS
if some one can provide me the steps since I am newbei...
Thanks in advance
Thanks in advance
does anyone can help for my x05ht (Japanese keyboard)
Hi there.
I'm using x05ht which I bought cell phone in Japan.
so my x05ht keyborad layout is difficult to US Model.
and I was trying to search how to fix it in this forum.
then I found this thread.
I'm using EnergyRom1.6 Latest. then I tried to install
some software following step.
1.install the Rom
2.LetsJapanWM61r07.cab
3.KeyTouchJapIMEr07.cab
then I can type Japanese, and read Japanese.
But keyborad still doesn't work well.
which part should I edit (about reg or something relavent part.)?
I'm not sure, but when I using At0mAng Rom it works fine about keyborad.
especially now, function and some buttom isn't work.
when I push the fn button, then running calender. I also tried search any
thread about this problem. but usually I can't find the way to fix completely.
Best regards.
I was reading today about the MMS settings and it seems there are some registry hacks needed as well as a neat little browser called wasabi for enabling the yahoo keitai page.
Attached is said browser. Please note I am not the creator of this software and I found it at this link: url. I have not, as of yet, tried it either, so don't blame me if it doesn't work as I currently know only what I have skimmed on the above link.