Database Users

CellTracker Alternative

I don't know where else to post this....I found this while looking for an alternative to the SPV Developers CellTracker app. It's an app called NiceTrack...the screenshots tell the rest of the story:
http://www.nicecuppa.com/nicetrack.asp
Background info: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=1
Screenshots: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=2
Download: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=3 (Version 1.2)
The source code for that app can also be downloaded from the Background Info link.
The SPV Developers CellTracker app (Beta version only, hasn't been updated since December) for PocketPCs is located at the way bottom of the page:
http://www.thelogster.34sp.com/celltracker/
NiceTrack updates the tower changes in real-time whereas CellTracker does not. NiceTrack also shows the dbm signal strength on a cool chart and it also includes a logging function that allows you to rename the cells your phone has connected to while the app is active.
Signal strength chart: http://www.ascendingangels.com/nicecuppa.com/images/nicetrack/main-page.gif
Here are a couple hints based on my experience so far:
1) In order to fully save the renamed/logged cell sites, you must first tap Save next to where you renamed the cell site. Then you must also tap Options/Menu --> Save (extreme lower left) to save all changes since the app was launched.
2) Use Menu --> Exit to completely close the app.
I have tested this for use on my MDA II w/Windows Mobile 2003. I don't know if the app is compatible with WM5 PPCs or regular Windows Mobile smartphones.
Enjoy

Thanks for posting.
This software has been discussed before, and it is great:
http://forum.xda-developers.com/viewtopic.php?t=3347&highlight=nicetrack
However, I believe people are having difficulty converting it to WM5 (when I last checked). But great stuff either way.
V

Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff

Good stuff sharpstuff Wish I had a gps!
V

sharpstuff said:
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Click to expand...
Click to collapse
Sharpstuff, you have an excellent app here. I had to search for a bit to find it but in the end, I'm quite glad to have it . I also like the pun you have for your site...it's quite distinctive since even as a German-American, I know when someone says "cuppa", they normally mean the cup of tea .
Keep up the good work and thanks for taking the time to develop such a great and invaluable app .

oooh.. *bookmark*
Do you have a regular Donate button somewhere? I see the shop, but I'd rather just get X amount straight to you, and not have to be awoken by some crazy delivery guy at 8am for a mug

Thanks for the kind thought...
But, I enjoy doing this stuff, so just click my google ads and I'm happy!
;-)

Got this to work on my 8125, almost... Clicking on 'add' under events causes it to crash with the following error:
NiceTrack.exe
NullReferenceException
Application::Run+0xf
MainForm::Main+0xa
....bummer - so close!

You need to select an event type eg. "Flash backlight" then click "add"..
Needs some validation there.. Plus, the events side of things isn't very useful at the moment, I need to implement some more event types.
Cheers

I installed it on my qtek9100 but it doesn't find a GSM-modem at all.

Also a Qtek9100, EN - found it on COM9 just fine

What would be really neat would be an event "Show Picture". That way it would be easy to make a make-shift map tracking thing. Simply grab a picture of the map off the internet, plunge a big dot on the map where you got the cell, save as image, and have that image displayed when entering that cell %) GIF files on the storage card, shouldn't take up too much space
Alternatively a full-fledged mapping thing could be developed, but that's a lot more work *nod*

@sharpstuff hey I installed it on my XDA EXEC, but when it scans for com and reaches com9 it just freezes...any ideas?

Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..

stop being sorry and add that donate button *keeps clicking google ads once a day but hopes google won't start ignoring his IP address for excessive clicking...*

N!co said:
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Click to expand...
Click to collapse
After a soft reset its working fine on COM9. Nice app.!

sharpstuff said:
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
Click to expand...
Click to collapse
So is Release 1.3b a partial fix for WM5 users? I installed it on my MDA II and it detects my modem on COM2 without any problems. Both 1.2 and 1.3 seem to work on WM2003 PPCs.
http://www.nicecuppa.net/
http://www.nicecuppa.com/download/NiceTrack_Release_1_3.zip
TIA

Yep, it's an intermediate release. Basically, it reminds the user on startup to set the Com port in settings
I'm working on v1.4 at present, this has more error checking on the GSM code, and multi-threaded com port detection so the whole app doesn't hang

For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.

ZeBoxx said:
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
Click to expand...
Click to collapse
I get that messagebox at random even after I closed the app and its not in the list of running programs. Strange...

O2, New rom, and not all of WM5 + route 66 Nav 7 error

Hi guys, I have a small problem, I have a Xda exe, and bought Route 66's Navigator 7 to run on my unit, problem is this when I try to install the cab file (which is sucessful) it fires up: Error one or more required files cannot be found. please reinstall the application. (close window). I have searched the net and this form for answers/solutions but can't seem to find any. When I was on other sites abt wm5 and set up problems I noticed that there is certain things you cannot get access to on the wm5/O2 software. ie, Like tring to set up a blue tooth connection, what you get with o2 is their attempt of a coms software rather than keeping it simple like windows based interface that everyone else has.
Is there anyway you can stop the o2 customisation cab running after a hard reset, as I think o2 are deleteing files that are required to run route 66. Also is there a way to have just wm5 installed the way you would get windows xp out of the box the way microsoft designed it without o2, or T-mobile mucking it up? :!: :?
Oh and by the way Microsoft as released the Beta of ActiveSync 4.2, which cleared up a lot of my connection problems if anyones interested in the link for it come back to me..

I believe that if you hard reset, go through the touchscreen set up and copy/paste tutorial, when it comes to the 'Tap the screen to finish setup' (ie - when all the guff is installed) if you then soft reset it stops the CAB file from installing and you're left with WM5 as Bill Gate$ intended it (Should point out that i've never tried it though, so it may be completely wrong!) Hope this helps

Oink1....Thanks for the reply on that, I will try that next time round and let you know. cheers

Newbie questions

Hi all,
Just got my I-mate JAM last week ... and absolutely love it. I know the JAM isn't the latest and greatest anymore, but I wanted a small PPC phone and JAM's the perfect size. The JAMin is too expensive for me, and I also think its improvements (wifi, EDGE, WM5 to name a few) are over-rated.
I had a separate PPC (toshiba e330 ... yeah it's about time it retires) and a smartphone (MPx220) before so it's great I only get to carry 1 device instead of 2.
Anyways, got a few newbie questions I hope you guys can help me with ...
1- Storage memory??
I realize the JAM has limited memory so I've been installing as many programs as possible on the 1G SD memory card.
I still found that ~ 60% of 'storage memory' is used though, so I started moving some more programs to the memory card (and had to relink them one by one).
Afterwards I found the 'storage memory' has actually gone UP even more ... from 60% to 68%??!
What is storage memory? I thought storage memory is the stuff (program / database) stored on the RAM, so by moving some of the programs to the flash card I should see the storage memory go DOWN, not UP?!
When I run something like a 'space detective' I find that all of my big files are on the memory card anyways, so I really don't know how my storage memory got so high, and don't know how to get it back down neither.
2. Repeated resetting
Everytime I do a soft-reset, the PPC has a tendency to do repeated resetting before I finally get it back ... the first time it freaked me out. I thought it's gone into an endless loop and I'd have to do a hard-reset ... good thing I got it back after 4-5 soft-resets. Once I get it back it actually runs stable, and wouldn't reset itself.
Is that normal? Has anybody else experienced this? Usually it'd reset itself again once it gets to loading the phone alarm today plug-in, or when it connects to the phone network.
I currently have the following plugin's installed on the today screen:
-phone alarm
- ADB Weather
- Calendar
And I also run WisBar Advanced 2 ... but I have disabled WA2 to reload itself automatically on soft-resets.
I put phone alarm, ADB weather and WA2 on the main storage instead of memory, because I don't want to increase the chance of crashing.
Does anybody else has this problem? Do I have a software conflict here?
3. Photo contact?
I use photo contact that comes with the phone ... now that software is a piece of crap to begin with, keeps freezing the PPC even for the smallest thing.
And, 5 times out of 10 when someone who's been assigned a photo ID calls, the photo doesn't show up. This is despite I've put the resized photo contacts on the main memory, not the memory card.
Anybody experienced the same problem? And what's a good photo contact ID program to recommend?
4. Good dialer program?
I can also use a good replacement dialer program ... the dialer program that comes with the phone works, but it's pretty slow in suggesting contacts as I dial, and the buttons a tad small as well for 1 hand operation.
I tried D9, but for whatever reason it doesn't install for me ... plus, I also need the DTMF tones to check voicemail and what not.
5. Must have appz?
Any other must have appz you guys would highly recommend? Since getting the phone I've installed:
- phonealarm (great appz for changing profiles and displaying sms / vmail / email / missed calls)
- Wisbar Advanced 2 (great launcher)
- Cyberon BT voice dialer (not sure how it's not included with the phone)
- Resco File Explorer
- Resco Picture Viewer
- Mapopolis
- Intelligolf
- Sprite backup (works well, but extremely slow if launched from the PPC)
- eWallet
Thanks! Any comment / suggestions is appreciated!

Number16, welcome to the board.
I'm afraid I don't have time for a thorough response right now, but some thoughts:
- please read the board rules. Posting a thread with a useful topic title will get you more help, faster. It's in your interest.
- read the wiki and do search the board. The Magician is still my favourite phone, and we've all spent years posting about issues for it. It's likely most of your concerns have already been discussed.
- specifically read the wiki on favourite software. It's far from complete, but it'll point you in the right direction. Someone asks the question every 4.7 minutes, precisely, day and night, so you will find other more detailed responses elsewhere. My recommendations: get gsfinder, claunch and SmallMenuPlus NOW.
- investigate the BigStorage Rom hack. (see Wiki)
Will try to post more later if possible.
V

apart from games I'd recommend the following:
1. Eye on privacy
2. XCPU Scalar
3. SPB plus
4. HiCalc
5. Novii remote
6. imusic

I would recommend;
AE Button plus
Allows you to map up to 3 functions per button, works great on the magician
+ its free
http://www.pocketgear.com/software_detail.asp?id=20322
"Total commander" is a great free file explorer
"Mortscript" is a useful for custom tweaking
"PHM Traylaunch" put shortcuts in the System Tool Tray
Also search this forum for a sound tweak that vastly improves audio quality when listening to music via headphones
& checkout http://www.pocketpcfreewares.com/en/index.php

Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...

number16 said:
Thanks guys, great advices there.
Speaking of AE Button plus, I installed the (free) ver 1.0.1 but somehow it only works for the contact and schedule button. I didn't re-assign the TALK/END buttons because it says if I do I won't be able to use these buttons in the dialer.
And somehow AE Button also doesn't work for the camera and record buttons (on the side) neither ... if I re-assign some other tasks to them, they don't bring up the camera application but won't start the intended application neither. I just hear a few beeps and nothing happen.
Does the paid version of AEB Plus improve that?
Sorry if I've gone off-topic here...
Click to expand...
Click to collapse
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.

Mister B said:
That's the same version as i'm using. Works on my contact & calender buttons & on my camera & record buttons perfectly, I use the camera button for the camera & flight mode toggle, I have mortscripts assigned to the other buttons which changes the buttons functions depending on what program is in the active window.
I find this easier to use stylus free than WM5 (I also own a Universal & a Prophet for the wife)
From your first post it sounds as your devise is a bit buggy, might be worth doing a hard reset or flashing it with a custom ROM.
A well setup Magician is an almost perfect PDA/Mobile phone balance
Have fun.
PS; Try the free trail for the paid version of AE Button & see if you like it.
Click to expand...
Click to collapse
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???

max414 said:
i have 2.5.1 registered version i cant figure how to toggle flight mode operation..help plz and i wanna ask if we can put magician on vibrate mode with any any key ???
Click to expand...
Click to collapse
Flight mode toggle
Download from link below then unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
http://myweb.tiscali.co.uk/pdamagician/wm2003sewm5software.html
http://myweb.tiscali.co.uk/pdamagician/Downloads/tel.on-off_100.zip

Mister B said:
Flight mode toggle
Unzip & copy the program below to your phone or sd card, then create a shortcut to it in your programs folder (if you have a shortcut in your programs folder, it will show up in the menu in Buttons). Then go to "Settings>Buttons" & pick what button you want to link to the flight mode toggle program.
Vibrate mode toggle
You could create a batch file to use with Mortscript (freeware) which would turn your vibrate on & off, then link this batch file to a button.
Its quite easy to do, do a search for Mortscript. If you need help let me know & i'll write the script for you & give you what help I can in setting it up.
Mortscript is a great bit of software which can enable you to solve a few problems so its worth doing some research on it.
Click to expand...
Click to collapse
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle

I've got the paid version of AE Buttons Plus and it still runs a little funny sometimes ... certain buttons will work from time to time. For example, I left "single click" for Button1 untouched (which should be Calender by default) and "double click" would start Notes. Well, it starts Notes on double-click all right, but from time to times single-click wouldn't do anything. A reset usually fixes the problem, but then it'll happen again after a while.
So instead of leaving "single click" for the button un-assigned, I've assigned it to Run Appz -> Notes. That did the trick so far.
I also find that Wisbar Advanced 2 is causing quite a bit of problem ... anybody else has problem with it? With WA2, PhoneAlarm and AEButtons running at the same time, the Magician gets pretty unstable. It's a lot better if I don't load WA2.
Which is too bad, cos i've been a fan of Wisbar from long ago (well, it was a freeware then) ... anybody has any suggestion for a taskbar launcher? I really don't want something that's too busy looking, and I don't like clauncher ... I use the today screen for caleder plugin's and what not.
Thanks,

max414 said:
i have got mort script but it s too much for my little brain......if was hoping if u could provide the file i will assign it a button ...looking forward to your help...thx for flight mode toggle
Click to expand...
Click to collapse
"max414"
I've sent you a private message rather than go further off topic on this thread.
Check your private messages & get back to me.

If you guys interested have a look at the 10 Best Softwares
Comments?

Here's my 2 cents on this '10best software' list ... befoer I start I gotta say for the most part I don't agree with it, for 1 reason or another.
1. Wisbar Advanced / Desktop.
Ok, I really like Wisbar, dating back to the PPC2002 times. It was a smart little program that worked very well as a launcher and took up close to nothing in terms of memory and storage, and better, it was a freeware. The Wisbar advanced these days though, is a memory hog for what it does. It may not be a problem on somehting like a x51v, but on a device like the Magician it really isn't the best solution for launcher. Plus, I dunno if it's just me, but I ran into all kinds of software problems with Wisbar advanced 2, potentially caused by software conflict with other softwares I have. Maybe someone else have better luck with WA2 though.
2. PocketBreeze
Never really used it, but personally I'm not a fan of busy today screen ... but that's just me.
3. PocketWeather
DOn't know why I'd pay for this software when I can get ADBWeather for free.
4. PocketMusic
I used PocketMusic in the PPC2002 days, and it's not bad ... but these days when you can get GSPlayer for free, it gives PM a run for the $$.
5. RescoFileExplorer
No question about this one. Always the first program I install after a hard-reset, 'nuff said.
6. Memmaid / PocketMechanics
I use Memmaid and it's great. Never used PocketMechanics
7. QuickNotes
Never used it ... so can't really say.
8. SPB Backup
I used Sprite Backup on my old PPC so I continue to use it on the Magician. Other than being rather slow when it scans your device, I have no complaint about Sprite. I never used SPB so I can't compare.
9. Internet Browser
Haven't tried anything other than IE so can't say ...
10. Theft Alarm
Well, I use eWallet to store all the sensitive information ... never used theft alarm so can't say.
I guess that's just the list for PPC ... because for PPC phones, I'd say PhoneAlarm's one of the top 'must-get' softwares for sure.

Slow Changing of Input Method?

Guys, I have a question.
I used to have an iPaq 6300 running WiMo 2003, when selecting input methods there is an arrow beside the input method you click on to bring up the menu that lets you choose between Keyboard, Block Recognizer, Transcriber or Letter Recognizer. This was instantaneous! The moment you press the arrow, the menu pops up and you can switch input methods instantly.
On my new Atom Exec though this is not the case. You have to press the input method icon first, which brings up the arrow, then click on the arrow, then wait like a minute before the menu pops up. What gives? Is this really how all WiMo5 devices work? Is this a problem with WiMo5 or with the Atom Exec in particular?
It is annoying because it makes it harder to switch between input methods. Could someone tell me the score on this?
Thanks,

My bad, I fiddled around with the Atom a bit more and fixed the problem by doing a Hard Reset. Now I set the PPC back up to how I like it and it's working flawlessly.

Hmm after some time the problem seems to be back. It looks like the phone bogs down with stuff after a while, causing this problem. I don't feel like reformatting, does anyone have a fix, or a program that cleans up and optimizes your PPC?

this is an issue of WM5.

It also happens to WM6. The more applications you installed, the slower it will get (not sure what kind of application though). Well, Atom Life has 1GB of ROM. Of course people will start installing a lot of applications.
Anyway, I read somewhere in the forum stating that if you have more than 10 today plugin installed, the SIP will take a some time to appear. The plugins don't necessary be active. I mean, the ones not active are also counted. I have not confirmed this yet though.

I have more than 40 programs installed in my atom. It didn't slow down that much (only 5 to 10%) but what I usually do is to backup everything first before I install anything. At the first sign of speed reduction or bugs, I just do a restore. I have more than 15 today plug-ins both active and inactive. However, one thing I noticed is that it is better if you install your non-essentials to your sd card. It doesn't matter if you do a hard reset, they will still be there and if you use a tray launcher or clauncher, you can configure the icons to reappear even if you do not re-install them. This way, you reduce the clutter in your main memory and at the same time save you the trouble of re-installing. The reconfiguration of the executable icon will take some time but it is still faster than re-installing 30+ programs. It is important though to maintain a storage of no less than 17MB. Once you go below this, you will really see the reduction in speed and will be pissed off with your PPC. By the way, do not use Opera or any modified IE (tab browsing and downloading. by the way, Opera is good with downloading but sucks in handling your PPC's memory) while doing something else with your PPC. It will really really slow down your PPC.

i posted this same thread sometime ago, but there was no solution. At last i discover the culprit. I see the difference in speed when i install Embedded Windows VB Runtimes. regardless whether i install it in the memory card or the main memory.

Got this info from another site, it really works.
--------------------------------------------------------------------
make WM5 SIP faster (加快輸入法) (not a joke)
X51V ENG A12 + Ce-Star 2.8R2A + Monster SIP + MS IME for JAP works well.
But I am not very sure "every WM5 PPC" works well, too.
After installing a lot of softwares, WM5 SIP becomes slow.
You can make it fast again.
1. install resco explorer 5.42 and resco registry at \Device
2. use resco registry to export the registry of
HKEY_CLASSES_ROOT\CLSID
to a file (like CLSID.reg) at PPC, or SD, or CF
donnot edit or modify CLSID.reg
3. use resco registry to delete CLSID
4. use resco explorer to execute CLSID.reg to import the registry CLSID back
5. turn off PPC, soft reset
It is amazing like magic.
--------------------------------------------------------------------

Weird... it really works. Everything back to normal. Menu is displayed instantly after tapping on the list button.
I'm using Atom Life WM6, so this mean that it also works for WM6.

Urk Double Post

Aha! O2's proprietary software is a bunch of Today plugins! That may be the culprit. I noticed the a while later though after the O2 software was installed.
I have no perceptible slowdown on the Exec other than the input method switching. I just need to fix that!
My main memory is about 85% free (83.6MB) and yes I do install all the non-essentials to the SD card.
MightyOx I'll try your method hopefully this fixes this issue. While "upgrading" to WM5 I thought it would be a completely better experience, but I'm finding WM5 has issues and that quite a few things were done better in WM2K3 (like the SIP switching speed) or how about creating a new SMS message in WM2K3 you only needed 2 taps here in WM5 you need 3. *roll eyes* sometimes I wonder what developers are thinking when they take steps backwards like this.
On the other hand I love being able to rotate the screen, and Voice Command 1.6 was totally worth it.

Mochan said:
Aha! O2's proprietary software is a bunch of Today plugins! That may be the culprit. I noticed the a while later though after the O2 software was installed.
Click to expand...
Click to collapse
It's not O2's software. It just happen to be the next software you've installed before the problem show itself. It can be any software. As I said in my previous post, it will happen after you've installed a certain number of software. I think it is WM5 and WM6 related.
Anyway, the workaround is already posted. So, I have no more complain about this problem.

Yeah, looks like it's not. I tried Mightyox's method, THANK YOU SIR my Atom is running fine again. It's like once you pile over some registry entries over the CLSID directory, it takes time to get it. So the solution is to delete the registry key and "re-enter" it so it goes back on top. Very strange but if it works then more power.

Tried it on my flame...Wow...works like a charm

P4350 small issues

Hi
(1)
I dont like annoying sound of opening/closing Start menu or choosing a menui item. To avoid it, I have to uncheck "Events (warning, system events)" item in Sounds&Notifications screen. However then I miss sound of warnings and system events I guess. How to disable sound for Start menu only?
(2)
When I ActiveSync with Exchange, ActiveSync keeps synchronizing endlessly. Its status is "Looking for changes", then "Synchronizing" and the same again and again without any limit. I just synchronize emails from Outlook folders. No matter if "DirectPush" or "Synchronize during"="When new items arrive" is turned on/off.
(3)
On the forums, BatteryStatusExt1.04.cab is being distributed. It doesn't work. I wonder what the file actually is. Original BatteryStatus tool has another filename and version as well.
(4)
smsOrganizer needs to activate using code from authors web. If you make a mistake (thats what I PROBABLY did), it will never run, even after reinstalling. Not nice. I can just wonder in what file or regkey the author stores the key:/
(5)
htCustom tool (tested version 1.4 and 1.5) completely not functional, throwing exceptions everywhere.
(6)
Any plugins to see Herald files in FAR manager (preferable) or Total Commander?
(7)
Any idea how to import VCF containing more items (not just one)? Seems Windows and Nokias have this problem. I already splitted one big VCF to 300 small VCFs and wonder how I'm going to import them. Clicking on them will take years..
(8)
My VCFs which Im going to import contain more mobile phones. Windows generally doesnt support it. In the address book, there is no option to add new field like on Symbians. How do you solve this situation? What do you do if you want to store more mobile phones? Of course lot of people have more mobile phones!
(x)
Why you use Rapidshare to store files? Please don't support those ****!
Great phone anyways. I dont care about money and this is the best phone I could find. Nasty size, high stability (wow, no single crash), fast synchronization, freaky keyboard (with sym.txt to be easily altered). Very happy with it

any hints??

Well i got you a hint for the last point (rapidshare):
Use http://www.xirror.com
Uploads all your files to 4 Sharedhoster automatically.

xsign said:
Well i got you a hint for the last point (rapidshare):
Use http://www.xirror.com
Uploads all your files to 4 Sharedhoster automatically.
Click to expand...
Click to collapse
Or: www.putstuff.com
and some xda-dev user made an own host for the xda community. I don´t remember the mirror at the moment. But i will search.

no thanks, I actually DONT want to support ANY of filehosting services. I strictly say NO to making business from sharing files. Use torrents or whatever instead.
any help for other points (except 3 which I found out why)?

more points
what i found negative also is
- alarm can use only WAV files (no chance to wake up)
- M$ formats forced (WMAs everywhere, no details about MP3 songs in Info)
- regurarly, when i type with hw keyboard, arrows stop to work
- sometimes storage card disappears (+ had "StorageCard2" problem)
- low quality loudspeaker, people just cant hear me

- use a program
- use coreplayer
- not true
- not true
- not true

xsign said:
- use a program
- use coreplayer
- not true
- not true
- not true
Click to expand...
Click to collapse
- ok im using a huge slow tool now, just to set the system scheduler...
- no problem
- true, even with remote control from Windows desktop, arrows stop working after some typing
- true, every morning, my scheduled events dont happen because the storage card is missing. but actually i see it's working, even if the drive is not corrupted (also happens sometimes)
- true, very bad speaker and microphone. loudspeaker is screaming and you actually dont hear voice. also people hear twice. also people dont hear you well generally. also, even with quietspeaker, people can hear you properly.

To your first problem I think all you have to do is uncheck screen taps. I had the same problem with activesync also. The problem turned out to be my firewall. Had to turn it off in order for the device to sync even if i set a permission first.
And if your still using WM5 I found this in the wiki:
Improve Sound Quality of Speaker Phone
You might have observed that when you turn on speaker while during a call, the other person has complained of too much disturbance on the line and can hear more of static then your voice. Here's a fix to improve mic sensitivity:
HKLM\Software\HTC\AUDIOGAIN(x)\RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM\Software\HTC\AUDIOGAIN(x)\EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where (x) = none, 0, 1, 2
You can find most of the reg edits from HTCustom and just do em yourself.
M

Heres the actual e-mail pertaining to the activesync problem. This can also be found on the Microsoft Website.
Good afternoon
We are aware of the HTC P4350 memory card corruption problem Farooq. We believe that Windows Mobile 6 will fix this issue that you are experiencing. We are expecting this update to be available for download through the HTC eClub on our website at the end of July.
With regards to your ActiveSync problem, there are many things which could be causing active sync to not synchronise
with your computer. One possible cause could be your anti-virus software and
your firewall.
To solve firewall issues, please open up your firewall program and navigate to
the exceptions section. Here you can set the firewall to allow certain programs
and ports. You will need to make sure your firewall is set to "allow
exceptions", then in the allowed programs list you will need to have four
programs related to active sync allowed. the filenames are as follows, however
they may be called different names in this list.
wcesmgr.exe
wcescomm.exe
rapimgr.exe
astu.exe
Also you will need to allow the following ports:
Inbound TCP
990
999
5678
5721
26675
Outbound UDP
5679
Once these ports and programs have been added to the exception list, you should
find that Active Sync will now work with your computer. If you are still
experiencing problems, then try disabling your anti-virus software as this can
sometimes conflict with Active Sync. If you still cannot synchronise then
please phone our call centre and one of our agents can troubleshoot your setup
with you in order to solve this issue.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Matthew
HTC Europe
[email protected]
http://www.htc.com
Hope that helps.

neptune, thank you very much for your reply. i have fixed most of my issues (they start with √).
(1) of course i have "screen tap" off, but Start menu still beeps loudly!
(2) √ FIXED somehow the problem disappeared - maybe by altering AllowLSP reg value, which was required to route internet from home PC to PPC.
(3) √ FIXED
(4) √ OBSOLETE - i dont care, will not search for some registry key to use the tool
(5) √ OBSOLETE still crashing - will not use the tool. I use ASergOptimize pack instead.
(6) would like to know. I heard TC plugin exists.
(7) √ OBSOLETE: i did it manually. it was really complicated job with lot of hacks, using regexp search/replace and manual import of all contacts one by one. I wish I never change platform again...
(8) √ OBSOLETE: again lot of hacking, I mapped Symbian fields to funny Outlook fields (e.g. "Mobile 2" -> "Car", "Mobile 3" -> "Radio")
(a) √ OBSOLETE I will use some tool. (I hate using separate tool for alarm. Why Windows doesnt have normal one.. I tried Gentimer tool, very slow one, crashing my phone on each event!)
(b) √ OBSOLETE - will use some tool
(c) BIG PROBLEM 1 arrows!!!
(d) BIG PROBLEM 2 morning schedules!!!
(e) wow thanks for this, will try it
overall, transfer from Symbian to Windows is not easy... a lot of work I had to do... however I feel much happier with it.
one note: interestingly, i find WM programs to be very small and take very small memory!

I sometimes had the same problem with the arrow keys on the keyboard.
Maybe you can fix the problem temporary if you switch to the Todayscreen and back again to your application where you type. For me this fixed it most of the time.
Dont know if i only was lucky because i did not got the problem often.

beowulf6 said:
I sometimes had the same problem with the arrow keys on the keyboard.
Maybe you can fix the problem temporary if you switch to the Todayscreen and back again to your application where you type. For me this fixed it most of the time.
Dont know if i only was lucky because i did not got the problem often.
Click to expand...
Click to collapse
I get this problem very often, basically when I type any SMS and that's not acceptable.. It can happen several times when writing one SMS. That's toooo much. I want it to be fixed somehow..

never encountered a keyboard problem such as this in the past. If you havent tried changing the keyboard then i'm not sure what it is.

never had any of the issues written about here with my p4350
either with wm5 or wm6
maybe I have missed something, but have you guys tried the wm5 ruu update for p4350? (http://www.brightpoint.com/Brightpo...HTC_NOR_5.4.409.2_4.1.13.34_02.79.90_Ship.exe)
thats a norwegian ruu, but im sure you can get it from your provider..or wait for the wm6
sorry if im stating the obious here