I don't know where else to post this....I found this while looking for an alternative to the SPV Developers CellTracker app. It's an app called NiceTrack...the screenshots tell the rest of the story:
http://www.nicecuppa.com/nicetrack.asp
Background info: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=1
Screenshots: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=2
Download: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=3 (Version 1.2)
The source code for that app can also be downloaded from the Background Info link.
The SPV Developers CellTracker app (Beta version only, hasn't been updated since December) for PocketPCs is located at the way bottom of the page:
http://www.thelogster.34sp.com/celltracker/
NiceTrack updates the tower changes in real-time whereas CellTracker does not. NiceTrack also shows the dbm signal strength on a cool chart and it also includes a logging function that allows you to rename the cells your phone has connected to while the app is active.
Signal strength chart: http://www.ascendingangels.com/nicecuppa.com/images/nicetrack/main-page.gif
Here are a couple hints based on my experience so far:
1) In order to fully save the renamed/logged cell sites, you must first tap Save next to where you renamed the cell site. Then you must also tap Options/Menu --> Save (extreme lower left) to save all changes since the app was launched.
2) Use Menu --> Exit to completely close the app.
I have tested this for use on my MDA II w/Windows Mobile 2003. I don't know if the app is compatible with WM5 PPCs or regular Windows Mobile smartphones.
Enjoy
Thanks for posting.
This software has been discussed before, and it is great:
http://forum.xda-developers.com/viewtopic.php?t=3347&highlight=nicetrack
However, I believe people are having difficulty converting it to WM5 (when I last checked). But great stuff either way.
V
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Good stuff sharpstuff Wish I had a gps!
V
sharpstuff said:
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Click to expand...
Click to collapse
Sharpstuff, you have an excellent app here. I had to search for a bit to find it but in the end, I'm quite glad to have it . I also like the pun you have for your site...it's quite distinctive since even as a German-American, I know when someone says "cuppa", they normally mean the cup of tea .
Keep up the good work and thanks for taking the time to develop such a great and invaluable app .
oooh.. *bookmark*
Do you have a regular Donate button somewhere? I see the shop, but I'd rather just get X amount straight to you, and not have to be awoken by some crazy delivery guy at 8am for a mug
Thanks for the kind thought...
But, I enjoy doing this stuff, so just click my google ads and I'm happy!
;-)
Got this to work on my 8125, almost... Clicking on 'add' under events causes it to crash with the following error:
NiceTrack.exe
NullReferenceException
Application::Run+0xf
MainForm::Main+0xa
....bummer - so close!
You need to select an event type eg. "Flash backlight" then click "add"..
Needs some validation there.. Plus, the events side of things isn't very useful at the moment, I need to implement some more event types.
Cheers
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Also a Qtek9100, EN - found it on COM9 just fine
What would be really neat would be an event "Show Picture". That way it would be easy to make a make-shift map tracking thing. Simply grab a picture of the map off the internet, plunge a big dot on the map where you got the cell, save as image, and have that image displayed when entering that cell %) GIF files on the storage card, shouldn't take up too much space
Alternatively a full-fledged mapping thing could be developed, but that's a lot more work *nod*
@sharpstuff hey I installed it on my XDA EXEC, but when it scans for com and reaches com9 it just freezes...any ideas?
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
stop being sorry and add that donate button *keeps clicking google ads once a day but hopes google won't start ignoring his IP address for excessive clicking...*
N!co said:
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Click to expand...
Click to collapse
After a soft reset its working fine on COM9. Nice app.!
sharpstuff said:
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
Click to expand...
Click to collapse
So is Release 1.3b a partial fix for WM5 users? I installed it on my MDA II and it detects my modem on COM2 without any problems. Both 1.2 and 1.3 seem to work on WM2003 PPCs.
http://www.nicecuppa.net/
http://www.nicecuppa.com/download/NiceTrack_Release_1_3.zip
TIA
Yep, it's an intermediate release. Basically, it reminds the user on startup to set the Com port in settings
I'm working on v1.4 at present, this has more error checking on the GSM code, and multi-threaded com port detection so the whole app doesn't hang
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
ZeBoxx said:
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
Click to expand...
Click to collapse
I get that messagebox at random even after I closed the app and its not in the list of running programs. Strange...
Related
03/09/2004
ExtendedPhone has gone Cemercial.
You can download a trial version from the leading PPC software sites.
There is still an old free version on page 4 in this thread but keep in mind that this is an old version and there and will be are many improovements in the comercial one.
I have developed a T9 like dialer using .NETCF.
(That means you need Pocket 2003 ,or Pocket 2002 with .NETCF SDF installed)
The dialer works very nicely on my device.
I plan to extend the features but first i need some feedback from you people.
They both work fine on my SX56. (May be the XDA II needs the ARMV4.)
If you have other processors i'll upload the appropriate files by request.
Any feedback or suggestion is welcome.
P.S For now it works only on Latin Alphabet
Anyone?
Whats the matter people .
No one is coming in here.
May be this is not the right forum to release a new software?
I'm interested, but was waiting for someone else to try it first! (You could be anybody releasing a virus or something )
Have you mapped the green 'Answer' button to your program like PhonePlus2 does?
Not yet
The software is still in alpha stage.
I just need some feedback on what i did so far.
(search algorithm, performance bugs etc...)
PhonePlus2 is a commercial software and has been around for a while.
I don't have the time to work full time so go easy on me.
i installed it & it says could not read service provider, getservice bla bla, so looks like its not made for us, what could be the prob;em?
Xda I
Rom: 4.05
Radio 4.01
wm 2003
Tried it on my SPV M1000, WM 2003, ROM 1.72.
Works, but, as you said, it's definitely in its alpha phase. Here are my initial thoughts:
- not very responsive, slow.
- no possibility to scroll through contacts if more than 3 options are available.
- same very mediocre (I'd say ugly, but it's a matter of taste) design, from the interface to the buttons.
- Operater doesn't show up
- What's with the 'Cool Stuff'?
Anyway, thanks for your efforts. Will definitely stay tuned on the developments.
- not very responsive, slow.
Click to expand...
Click to collapse
is that not just the bane of .net ?
First of all thanks for the feedback.
i installed it & it says could not read service provider, getservice bla bla, so looks like its not made for us, what could be the prob;em?
Click to expand...
Click to collapse
I have uploaded a version without the "Service Provider" although it works on my sx56.
Works, but, as you said, it's definitely in its alpha phase. Here are my initial thoughts:
- not very responsive, slow.
- no possibility to scroll through contacts if more than 3 options are available.
- same very mediocre (I'd say ugly, but it's a matter of taste) design, from the interface to the buttons.
- Operater doesn't show up
- What's with the 'Cool Stuff'?
Click to expand...
Click to collapse
As for the design I'll support skins later.
If you have more than three contats starting with the same Letter then press another button and if still have more yet another,
I could add another one or two options for contacts but then you could say why 5 , why not more?
Cool stuff is just a logo.
As for the speed i'm trying to optimize and i think this version is a little less slow (you are right Rudegar) but untill the next release of .NET CF the one we have bundled with windows is no match for NATIVE code hence the slow startup.
There is a newer version (1.1BETA) on later post.
its working good you first need to work on the speed then on the interface & would be grate if you link it to the messages since we can use it as a keyboard layout also, sorry i don't have much time to write a full description but i will do that tomorrow
since you are a programmer why don't you develop a sw for sending scheduled sms's, i would defenatly be intrested & make no mistake such sw has never been made for PPC yet so make & sell it
new dialer
looks great but is very slow it would be great if it was faster also could you add on some thing to make it easier to send sms,s when you are busy.
well done keep up the good work
regards kevin :lol:
new dialer
looks great but is very slow it would be great if it was faster also could you add on some thing to make it easier to send sms,s when you are busy.
well done keep up the good work
regards kevin :lol:
Thanks guys .
I'm working on the speed problem but for now all solutions make the size a lot biger with not much improvement.
As i see there are two problems:
1 Loading time:Loading time is a bit of a problem in .NET (because of it's nature)
I'm trying different techniques but with no significant improvement.
So in the mean time just minimize the program and don't close it.
2 The first letter of the contact:
I'm working on that and i'm geting somewhere.
As for the SMS i'll have to resolve the speed problem first but i'm thinking about it.
Stay tuned
elir,
Found some issue.
- USSD code not supported. E.g. press **21*xxxxxxxxxx# to make call forwarding but it's not support in your software.
- Only 3 slots in the searching result. Maybe I have 10 contacts match the result but fail to show the 4th to 10th
- Unable to enter "+" to dial a IDD call.
Cheers,
Paul
Source code?
Elir, what about releasing this piece of nice work under any open source licence? I'm a developer in .NET for 4 years, so maybe I can help you.
Is it in C# or VB.NET?
Suggestion for faster searching:
What about creating tree from Contacts in memory on the start of program? If my assumption your dialer searches in Contacts directly is right...
Found some issue.
- USSD code not supported. E.g. press **21*xxxxxxxxxx# to make call forwarding but it's not support in your software.
- Only 3 slots in the searching result. Maybe I have 10 contacts match the result but fail to show the 4th to 10th
- Unable to enter "+" to dial a IDD call.
Click to expand...
Click to collapse
I'm working on international and ussd calls but as i said before want to resolve the speed issue first.
As for contacts slots , the whole point for an application like this is dialing one handed when bussy(driving etc...) , so adding slots will not help on that.
The only problem i see with this design is when you have more than three contacts with exactly the same first name.
This can be solved by adding search by last name but again i'm having speed problems as it is.
Elir, what about releasing this piece of nice work under any open source licence? I'm a developer in .NET for 4 years, so maybe I can help you.
Is it in C# or VB.NET?
Suggestion for faster searching:
What about creating tree from Contacts in memory on the start of program? If my assumption your dialer searches in Contacts directly is right...
Click to expand...
Click to collapse
I don't know yet about open source but i can tell you thats written in c# with a lot of native code (.NET CF lacks all the phone and outlook functions)
Thanks for the suggestion but If i copy the entire phonebook to memory at startup :
It will add another 2 seconds (and i have only 180 contacts) and it is slow as it is.
It will allocate a big chunk of memory and as you probably know we don't have a lot of it.
More than that if you add or change a contact you'll have to restart the program for it to appear.
How about bugs?
Nobody has reported any.
What do you not know about open source?
Or you mean, that you are thinking about releasing final version as commercial software? Com'on man...
In C#? Nice one brother...
Hm... In my QTek 2020 is about 80MB of free memory, so what is problem? :wink:
About refresh of tree: Isn't possible to add some event handler on changes at Contacts database?
Bugs will follow very soon...
Hm... In my QTek 2020 is about 80MB of free memory, so what is problem?
Click to expand...
Click to collapse
Most of us have XDA I so the memory problem is real.
About refresh of tree: Isn't possible to add some event handler on changes at Contacts database?
Click to expand...
Click to collapse
As far as i know (and i have done some research) that is not possible.
Re-write in in C++ (or even with MFC) for much better speed. .NET sucks ass on a PC let alone a poor ikkle PPC!
New version
Hi all!
New version 1.0.3
Fixes:
1 International dialing
2 Now you can use pound key just for #
3 Less slower (at least in my xda)
Added a module to send SMS .
A little clumsy but .... .
I didn't check the Sms module thoroughly but for some reason it doesn't dial international numbers ( i think is the "+")
PS The sequence of characters can be changed( for now i just went by the abc)
There is a newer version (1.1BETA) on later post.
SMS
I found out that numbers begining with "+" cannot be used to send SMS.
I'll fix this bug tomorrow so wait for the next version.
Any suggestions for my qwerty keyboard are welcome.
Has anyone noticed a speed increase?
Hi all,
We just released a new dialer (freeware) which you can download from Handango. You can download from
http://www.handango.com/PlatformProductDetail.jsp?productId=152403
Features included in KikkerDialer are:
- The most advanced number dialing system which allows for entry by number panel or keyboard, editing, insertion, copy / paste, etc
- Intuitive and simple UI providing the main functions of a phone such as contacts, dial, access to special characters (e.g. the + sign for international dialing)
- A user interface for selecting contacts which mimicks the most intuitive methods for selecting contacts such as those used within standard mobile phones such as Nokia, Sony Ericsson, etc
- Synchronisation with contacts database (mobile, work, home)
- Extremely fast and responsive to use
- Access to the Windows Mobile clipboard for copy / paste
Feedback welcomed. Enjoy.
Kikker Interactive
I'm sorry, but I really don't see what is so special about this software. Maybe I have got it wrong, but I would say that D9 is better than this, and PhonePlus is much better. I don't want to scroll to the letter J every time I want to call my friend John, and so on.
Copy and paste is nice, but where is the T9 contact selection as in D) and PhonePlus, I think that is a great feature.
The fact that this diealer resembles old standard GSM phones is of no interest.
Sorry for only giving bad feedback, but then again, I might haven't found the cool features.
nteresting… just tried this
First comment - good to see another free dialer out there given what shipped with the jam.
ave only tried this for abt 15 minutes but like it very much so far. Is a lot faster than D9 (my only complaint with that software – I have ~ 1,000 contacts in my jam and the UI is v unresponsive). The thing I like with this new dialer too is the editable text field which seems to be missing on most other apps out there. The ability to edit a number before a call (e.g. insert +44 if not already in international prefix), insert a digit when you have entered incorrectly, etc is just what I was after. Would be nice to see call history in there too btw.
Intuitive and simple UI providing the main functions of a phone such as contacts, dial, access to special characters (e.g. the + sign for international dialing) --->Cool... :wink:
Crashed on my WWE Qtek S100 .. when I try to call ..
Carlis
Hi Carlis,
In the first few hours of release, the first installer required you to have OpenNETCF on your device. It seems not so many people have this so we fixed this issue and now you no longer need this on your device.
You should uninstall the KikkerDialer and run the the new installer file (now setup.exe - ~2MB), downloadable from the same location at Handango. Please give this a go and let us know if any probs - [email protected]
Best rgds,
Kikker Interactive
I'm surprised all of you think different than me, but I will give it another try, I guess. I still don't think it can compare with PhonePlus with all the features it has, but then again it's freware.
/T
Cant downlod the Setup.exe, it still downloads the setup.msi, is this the right version? I'm getting the same crash. Can someone post it here?
ZeroXtreme said:
Cant downlod the Setup.exe, it still downloads the setup.msi, is this the right version? I'm getting the same crash. Can someone post it here?
Click to expand...
Click to collapse
for me the download link does not work at all. Page cannot be displayed.
Well, I downloaded the MSI-file from handandgo. Now in can run on my T-Mobile MDA Compact but when I try to dial, it crashes:
KikkerDialer.exe
TypeLoadException
Failed to load type OpenNETCF.Notification.Led from OpenNETCF.Notification, Version=1.2.3346.0, Culture-neutral, PublicKey Token= 30C767B29D52D6E6
Can it be fixed? I wanted to test this application concerning tone dial (DTMF sending).
Anonymous said:
Hi Carlis,
In the first few hours of release, the first installer required you to have OpenNETCF on your device. It seems not so many people have this so we fixed this issue and now you no longer need this on your device.
You should uninstall the KikkerDialer and run the the new installer file (now setup.exe - ~2MB), downloadable from the same location at Handango. Please give this a go and let us know if any probs - [email protected]
Best rgds,
Kikker Interactive
Click to expand...
Click to collapse
Hi
Thank´s for the answer...
but .. hm .. its not an exe on the same location .. its still the MSI ..
Carlis
ZeroXtreme, 718 & Carlis - Our apologies - we actually meant to the setup.MSI - the file you see up there is the right one (it is not an .exe).
However, seems some of you are still getting a runtime issue on your devices. We suspect this is due to a missing DLL - but cannot replicate your issue right this moment. We've just received some more devices now tho and are retesting. Will post a response here shortly. Feel free to email us directly in the meantime.
Iggy - the handango site must have been having problems. You should try again.
Kikker Interactive
Beta testing - never easy. I'm having enough trouble and bugs beta testing Mobi Dial 2.5 right now, so I'll think I'll pass on this one. Someone let me know when there actually is a legit, ergonomically competent and STABLE replacement dialer out there.
OK thank you all for your patience.
Our new devices arrived and we were able to replicate the issue that some of you were having. This has now been solved with a new version of the setup.msi (now named setup_20050202.msi as Handango doesn't seem to allow overwriting).
You can either download the new app from Handango (http://www.handango.com/PlatformProductDetail.jsp?productId=152403) or we've also hosted it at http://69.20.6.190/KikkerDialer/setup_20050202.msi for your convenience.
If you don't want to go through the process of download + installing the 2MB file again, there is an easier way for those of you who already have the previous version installed. Please follow the steps here:
1. Quit the KikkerDialer
2. Download two dll's http://69.20.6.190/KikkerDialer/OpenNETCF.Notification.dll and http://69.20.6.190/KikkerDialer/OpenNETCF.Phone.dll
3. Copy both files to \Program Files\KikkerDialer on your device (or wherever you installed the dialer)
4. Restart the app
Any problems - please let us know. Again, apologies for the false start for some of you. From those who were not affected however, we had some v positive feedback and to repay all your efforts, will add some more features within the next few weeks
Kikker Interactive
Yes, with the dlls you provided the program starts okay. However, I failed to dial DTMF tones. Sometimes it is necessary to dial extention or enter a PIN-code. Such a pitty!
Exelent .. thx.. it now works on a Swedish WWE Qtek s100 without need of the extra dll´s ..
Only thing that is missing .. DTMF codes .. to use bank transactions and so..
When they ask for my account nr .. and I press the keys.. nothing happends..
And finaly .. how to replace the old dailer hardware keys.. Green and Red phone keys to be using Ur dailer.. it still actiavte the old one..
Best Regards Carlis
Hi - ok glad we got all the installer issues cleared up.
Yep - DTMF tones are not supported currently. As users of the software, here is what we do:
- Make the call using KikkerDialer
- When prompted to enter PIN (etc), press the green call button and the standard windows dialer will appear
- Type in your code using this interface
This works fine against all systems. Obviously not as intuitive. We are however, working on building in DTMF into our next release and have made some progress so far but won't ship till its ready. At the same time, we'll try to address the issue of how to bind KikkerDialer to the green call button.
Keep giving us your feedback in the meantime, v useful.
Best rgds,
Kikker Interactive
Would you manage dialing DTMF tones, you'll be great! But please note that the standard Windows dialer do not work correctly with the DTMF tones. There is something wrong with the duration of the tone, as I suppose. So with that dialer I often reach wrong extention or dial wrong number.
First of all thank you for the freeware.
in spite that, I dont think I would throw phoneplus away yet which serves my every needs.
But it is nice to see some developers trying to give some fight to proffesionals.
Thanks for all your comments. We're still working on getting a v1.0 out there shortly and the latest is good news. From the latest development version of the KikkerDialer, we now have full control of all the JAM buttons such as the direction pad middle button (to select contacts), the green dial button (to open the dialer and make calls), etc. This feature alone allows for complete one handed usage of the dialer (i.e. no stylus).
Now focus remains on adding:
- Call history
- Easier searching on contacts
- DTMF
This last, frequently requested, item is proving to be quite a challenge. We shall persist!
Best rgds,
Kikker Interactive
I've used my JJ for a week [+] now, and after being a pretty strong user on my Himalaya, I'm not convinced that the JJ has a lot to offer. Here's a summary of my experiences, and some questions ppl may b able to help with:
What it truly offers vs XDA
Look, it works. But is it worth the money. Here's what you truly get, make your own decision. I have loot, so I went for it. But if I was stretched, there's no way...
Pretty kewl internet surfing: Speed good in 3G areas, and screen size along with small fonts (hi res) makes page width manageable. I find many sites where the combo boxes do not populate, but it definitely works on many sites that my XDA did not. Can't wait for Opera, tho many others anxiously await NetFront.
Useable email writing due to good keyboard. But, even with WebIS Mail, there is no HTML mail - just plain text. U can receive HTML as text of course.
Battery life not much different to XDA: a well set up XDA that is. I'm only now trying with 3G turned off to see if that helps further [Actually, I think it's quite a bit better than the XDA afetr all]
Pretty: Yep, VGA is very pretty. [After some use, I'm finding it very nice for calendars, surfing, emails, and anythng else where screen estate was apremium]
Terminal Services client: (aka remote desktop) - STUNNING given hi res. I can now get into my remote eMule server and see how things are going in crystal clarity. Love it!
Issues I have not solved - any thoughts?
Not enough hardware buttons in good locations: I drove my XDA with ButtonMax and the easily located hardware buttons. The JJ has fewer, and rather discrete, buttons. This means that you can't always hit that "close app" button easily, and paging in MobiPocket is limited. I HAVE gotten buttonMax to work - but a workaround is required. [VIto ButtonMapper also works]
No 'New' button: This sux BIG time! I had my XDA customised to "New SMS" vs "New eMail", and now I have to go into mail (WebIS mail beta is sloooow), choose account (SMS vs eMail), then hit new. Sounds like I'm whining, but I churn out a lot of messages in a day... [Using pocketPlus, I;ve gotten a "new message" command mapped to a hard key. Works great: hit the button and I get a list of account options. So it goes button-click accounnt-type message]
No Pocket Informant: Oh this is BAD BAD BAD!! The internal calendar app is SO crap one cannot believe that devices actually sell with it! I wouldn't have ever changed to PPC if I hadn't known about PI in advance. ANyway, PI fails on the JJ, even with October-1 ROM, due to 'POOM' issues. They are workin on it, but I'll be watching Agenda Fusion's progress equally closely. The first across the finish line...
[UPDATE: I've got it working - read their forum covering v3 this beta release for more. It's AWESOME in VGA!]
Nope - it fails after a day, and PI dev/ceo dude says he thinks it's a JJ ROM issue and it not working on solving it. SO start watching for Agenda Fusion to solve this for us...
Titlebar date/time: the OBOpt hack works, but the damned date only shows in the today screen. Go into any app or programme folders, and it gets knocked off the title bar. I WANT the time visible at all times - not like a today plugin damit!! Any suggestions? [UPDATE: Answer below - I didn't know of this WM5 feature]
Speed dial and recent call access: Up/Down on joypad no longer take me to speed dial and recent calls list when in phone mode. Now I have to touch the screen to dial whilst driving. Voice dialing will help - bit I've not tried this yet. Will see if ButtonMax can solve l8r tonight. [No, there's no "recent calls" command to map BM to - will have to work on a reg hack at some stage for this]
If ur buying for the keyboard, be careful; it's not that accessible. I still use the SIP for a lot of input, and only unrevolve the whole things when I'm settling in to surf or message [But its a GREAT keyboard!]
No BT icon. Bit daft. [Will test out BT switch apps this w.end]Buss updated his BT icon app for the JJ - look elsewhere under my posts. It's great - but it showed me that the BT issue is actually a deeper problem covered elsewhere - BT disconnects and is unreliable at best!
[*]Duplicates: I can't f'ing believe that I STILL get duplicates in the notifications queue!!! M$ have absolutely no excuse for not sorting this widely known issue out once and for all. Havn't yet found a proggie that does nightly cleanup - any tested suggestions? [REMOVED: this must have been a rogue app cos after a hard reset and re-insatll, I no longer have dups. I'll try to figure out what caused it over the next few days]Npote - they are BACK! sddeamon dups, and despite several hard resents I have not managed to figure out if there's a specific app causing them. I do know that there's no software to automatically clean up every night that works for the JJ on this particular dup[/list:e4db347fb1]
Things that work well for me
I've got quite a few of my critical apps up and working. Here's what I rely on:
Uptime Meter: gr8 4 battery life watching
Phone Dashboard: to track monthly 'free' minutes. Charts and dialog boxes don't do well in VGA, but it works [No it doesn't - no minutes are tracked - sorry!]
PocketPlus: Now, some forums say this does NOT work - latest 3.0.0b3888 does (with October-1 ROM). Repeating alarms do not work tho so...[UPDATE: I have recently hard reset and am installing 1x1 over a few days to see what the bugger is - PocketPlus is a contender at this stage...]
apReminderPlus: ESSENTIAL repeating alarms (who the hell hears that wank "cheep" in the morning!?). Not the best app but it's free and works. WIll try others over time. Reason I'm not happy is that altho it repeats and ascends, it does not pause for 5 mins then repeat the process over until u finally get back to your phone and realise how many meetings you've missed. It tries - wants to auto-snooze, but this feature does not work in WM5
Terminal Services client is great
ButtonMax: Now ESSENTIAL given the lack of external buttons on JJ. Map the few buttons u have to click, double-click, click-n-hold. I can't record Macros yet despite remapping "button 4" and readin all the help. They just don't record. [Also de-installed for now]
Pocket Sudoku: Yeehaa!
Mobipocket reader: Works - but fonts are not great to read for long [Get beta 5 from their dev site - Google it - STUNNING in VGA res!]
1-Calc, total commander, and eWallet all work fine.
Bluetooth headset support: Does a damn good job of reconnecting with my headset when I'm in rangeNOPE - it's a load of sh*t. Read my posts elsewhere on this!
Voicel dialing: Works VERY well - 1 click of BT headset and I'm ready to go
Extra section: Why I had to hard reset
Things went tits-up when I tried to install an app, then half way thro the cab transfer from PC-PPC I cancelled the process. DOn't see why it's an issue....but thereafter:
Add/remove list was blank
Could not install any new apps
Registry restore via sunnysoft did nothing to help (sunnysoft say "not for WM5" in their email to me - so don't expect too much from this...!)
Pocket Informant had failed (blank calendar issue) on me earlier so I was happy to re-build and give it a second chance anyway
At one stage my BT device went spastic - would not work, and when I deleted it I could not re-pair it
What's important is that there doesn't seem to be a way to get back to a saved state. Sunnysoft is NOT reliable according to THEM, and a simple memory copy cannot be restored.
I've been trying the beta for Mobipocket Reader 5. It works (though a bit buggy sometimes) and looks better in VGA but you cannot access the ID of the device from within Mobipocket. So, you cannot read secured books. I take it you used the old 4.x version and you could see the device's Mobipocket ID?
Re: JasJar: Thoughts & issues after a week's use
Titlebar date/time: the OBOpt hack works, but the damned date only shows in the today screen. Go into any app or programme folders, and it gets knocked off the title bar. I WANT the time visible at all times - not like a today plugin damit!! Any suggestions?
Click to expand...
Click to collapse
Try tapping the Date/Time display on the Today screen. On the "More" tab there's an option "Display the clock on the title bar in all programs".
Re: JasJar: Thoughts & issues after a week's use
no1 said:
Try tapping the Date/Time display on the Today screen. On the "More" tab there's an option "Display the clock on the title bar in all programs".
Click to expand...
Click to collapse
Awesome no1! You just made my whole lengthy post worthwhile. Thanks a stack.
Click to expand...
Click to collapse
DaleReeck said:
I've been trying the beta for Mobipocket Reader 5. It works (though a bit buggy sometimes) and looks better in VGA but you cannot access the ID of the device from within Mobipocket. So, you cannot read secured books. I take it you used the old 4.x version and you could see the device's Mobipocket ID?
Click to expand...
Click to collapse
Nice 1 Dale! Found it and I'm MUCH happier with fonts - it's so crisp n clean Happy to live with bugs (not that I've seen any yet).
For others, the beta is here:
http://www.mobipocket.com/dev/beta/windowsmobile.asp?ID=1
For those interested, I emailed the makers of pocket informant saying that I have a wm2005 device and they replied with a link to the latest beta that works very well on the JJ. I suggest any1 interested do the same.
bukwit said:
For those interested, I emailed the makers of pocket informant saying that I have a wm2005 device and they replied with a link to the latest beta that works very well on the JJ. I suggest any1 interested do the same.
Click to expand...
Click to collapse
Hiya bukwit, can U confirm for me: Was the link like this: http://download.pocketinformant.com/FTF/PI_Public_Build/
If not, please post it here. If so, this is the beta3 build that I (and several others) tried. It worked gr8 for a day, then during the midnight cleanup run I hit the blank calendar POOM issue. Let us know if you get past tonight without hitting the same wall...
yes this is the correct link for the beta...the current version I have is Rev 3 build 434. Been running it since saturday with no issues so far...
date hack on the today screen
Hello
As in the title- could you guys please provide the link to the date hack on the today screen? I am really missing the date on the JasJar top bar
New Soft
One more thing -
There is nice new pocket plus 3.0.1 which for my taste takes less memory, For me PI beta3 works ok.
Lucasz: Thanx for 3.01 - got it. Date hack is here: http://www.phm.lu/PocketPC/RegTweaks/
ANyone know how to change format of date shown - I know I had it as dd-mmm in my XDA but I've no idea where I found the regkey
Bukwit: darn! what r u doing right that it works...? Think I'll do a full sunnysoft backup, then try PI alone and build up until I find whatever knocks it out. Will be worth it...
I little anoyance I have noted with the Jasjar that you'd may like to confirm:
The volume slider is not functional when the Jasjar clam is shut, screen towards the keyboard. It is OK with screen facing up! I discovered this playing mp3s as I do of a morning with device in protective pouch. I often like to bump volume up and down for various tunes. I found to have control, I have to slip the Jasjar in its case screen facing up - not good. :evil:
@fonxnolds,
Thats the reason they gave a wired headset which has a volumer slider on it
universaldoc said:
@fonxnolds,
Thats the reason they gave a wired headset which has a volume slider on it
Click to expand...
Click to collapse
I never opened them! I use Etymotic Research ER-4P earphones / earplugs, exclusively for listening to music. Retail approx US$330 a pair. >30db Noise reduction passively, brilliant Bass... :wink:
Anything that comes with a device is suitable for phone dialog only, not Music in my opinion. Sound leaks, annoying other people etc.
I may consider snipping the earplugs off the supplied cable and wiring up a 3.5mm Stereo socket for my ER-4Ps if that is the only solution. Better still check out the accessory market and grab a spare that I can alter with petty cash.
$330?!?! Amzing! I guess you really do like your music!
I'll update this post reguarly using colour to distinguish between edits. So, If u post fixes, be assured that they'll get into the main post, but please don't be offended if that don't pass credit - readers will see who suggested it further down.
The second update is shown in RED
bukwit said:
yes this is the correct link for the beta...the current version I have is Rev 3 build 434. Been running it since saturday with no issues so far...
Click to expand...
Click to collapse
Build 444 has been uploaded. It works fine
I still get loads of duplicates in the notification queue as well - all from sddaemon.exe? What's more this is a 'wakeup' event and so the duplicates were making my jasjar take foorreeevveerr to turn on from suspend. I removed them with scareybear check notification and it's much quicker to resume from suspend (like half a second as opposed to three to four seconds).
Does anyone know what sddaemon.exe is?
tintoy said:
I still get loads of duplicates in the notification queue as well - all from sddaemon.exe? What's more this is a 'wakeup' event and so the duplicates were making my jasjar take foorreeevveerr to turn on from suspend. I removed them with scareybear check notification and it's much quicker to resume from suspend (like half a second as opposed to three to four seconds).
Does anyone know what sddaemon.exe is?
Click to expand...
Click to collapse
I found that after removing PI completely, these notification dups stopped. I had exactly the same issue before. Not saying it is definitely PI, but that's the ONLY thing I changed and I've been OK for a whole 8hrs now.
PS: Scareybear did not remove dups for me - just ID's then then I had to remove manually! Anton Amov's Pocket mechanic removed them - any idea of a utility that does it every midnight like we had in 2003SE?
Updated again in blue
Hello
I have just purchased a new XDA Mini S - to replace my dying XDA II (which was giving me electrical shocks and starting to lose data).
Ash (an extremely knowledgeable and helpful O2 shop assistant in Uxbridge) directed me to this site so I could get the details required to to set-up and run my new PDA in Corporate mode.
After set-up was completed, I synchronised the Mini with my work computer (via Activesynch 4.1) - allowing me to download my calender, task and contact items.
And that's it so far!! ...no other memory-intensive applications installed, ...no massive ringtone files, ...nothing!!
However, the unit is running very slow in comparison to my old XDA II. When I am working in the Calender application and go forward several weeks, followed by selecting the 'return to today' icon, it takes about 10 seconds to react. Similar behaviour exists in 'Tasks', when returning to the 'Today screen', and when using the menus - so, basically, all of the time. My previous unit reacted instantly - and that was fully loaded with software.
What can I do? I love the new Mini and the upgraded spec it offers - but is is unworkable - as described above.
If I invested in a mini-SD card could I utilise the additional space as program memory rather than storage?
Hopefully somebody can help. I am reasonably I.T. savvy - but only as a user and not much experience at progrommer / developer level - so basic intructions my be needed!!
Thanks in advance
Gary
I think my previous message was too long...
Basically, how can i speed up my XDA Mini S which is already running in Corporate Mode?
Thanks
Gary
Soft-reset once a day? My Vario runs acceptably quickly after a soft-reset, but slows down over time.
Hi Zathras
Thanks for the tip...
...but I have been 'soft-resetting' several times per day - and it doesn't seem to help.
I do have several years of appointments in my diary. Would reducing this to only 2 weeks of history help?
Thanks
Gary
Hi Gary,
I had a Magician before and also feel the 02 mini s (Wizard) is way slower.
I have read elsewhere that the Wizard has a silly anti-virus program that always runs in memory and will chew up memory.
The boards indicate that to use a different extended rom. The only problem is I cannot get a view on which portions of the o2 Rom should be deleted and which should be kept.
Let me know if you find a way.
Thanks
Adrian
I have noticed a few times after running active snc on my mini s it slows right down till i soft reset.
could it be the same problem?
Hi Adrian
Thanks for your help...
I'm not a programmer / developer - so wouldn't know where to start with ROM edits, etc...
Knowing my luck I would probably do something unrecoverable!!
Is there an easy way to do this? Is it done in the Wizard directly - or via the PC?
...and is it a file that's viewable in explorer?
Excuse my basic approach to all of this. Maybe there is a tutorial somewhere on the boards...
Thanks
Gary
does it slow down after active sync has run ?
Goto to settings memory and make sure all your programs are shut down especially activesync as this seems to slow it down more than anything. Also download check notifications and remove any entries in red that have probably appeared especially if you have been soft resetting several times per day.
You really should see a speed increase if you complete the above. Activesync really does slow your wizard down and more than a few duplicate entries found and removed with check notifications will really help.
See if that helps.
It seems to be the same before and after activesynch!!!
I closed down all running programs and the Calendar is still dead slow...
How do you 'download check notications'?
Thanks again
Gary
http://www.scarybearsoftware.com/ppc_cn_overview.html
Thanks for your help
Do I need to install both 'Check Notifications' and 'Notification Clearfix'.
I am correct in presuming that 'Notification Clearfix' prevents future duplications whereas 'Check Notifications' lets you see all events, whether or not thet are offending?
Gary
try tweaks 2k2 there are some reg hack that help with peformance
I've installed the one that runs at startup, but it only helps clean up the list at startup - not after startup; so if you add alarms/etc., the list can get mucky again. So I've also got it under an icon to run from time to time Need to find a nice scheduling application that can run other applications - just have it run every 8 hours or so
Try some other apps apart from your calendar, it could be that there is just too much info in there. You may just find its not as speedy as your last device, but thats just the way it is. Its a trade off and maybe if the speed is a big issue the wizard isnt for you.
I heard a lot of people saying the wizard is slow before I bought one, but I found its speed fine for what I expect from the device. I find my uni much quicker, but again its that trade off, my uni is much bigger.
The wizard needs to be loved for what it is not for what you want it to be. :lol:
I'm trying to love it - believe me !!!
...it is only the speed of the calendar searches that really annoys me - I can cope with the sluggish moments.
And I have just discovered something... when you cross one month to the next, the calendar freezes
If someone can do the following for me - it will verify whether it is specifically my unit that is at fault.
Open Calendar, switch to 'Agenda View', and then, using the directional keypad, arrow right until you cross over one month - say January to February. Does the calendar stop working?
When it rcovers, hit the 'go to today' icon. What happens?
I think there is a bug!!
Gary
Got the mini s ab out a month ago from O2 shop. I just did a hard reset and didn't install any of the O2 crap. Is running quite fast and everything just seems fine. I have tried what you said on the calendar. I don't have any problem. The calendar program just keep running without stopping or anything. After I close the calendar, I pressed on the 'Today' button and everything seems fine.
Thanks for trying for me - I appreciate it...
I just need to find a solution that works for me.
I already have the most basic install possible - corporate mode - so wonder if there are any more avenues to go down...
Cheers for now
Gary
Garrington said:
And I have just discovered something... when you cross one month to the next, the calendar freezes....I think there is a bug!!
Click to expand...
Click to collapse
Just tried this on my Charmer in case it was a WM5 bug and I can't replicate it - all works fine.
Try doing a hard reset, and then just when the little box comes up saying something like 'customising in 3 seconds' quickly press the soft-reset button.
Voila! - basic WM5 with no more o2 crap installed! You'll have to set up the gprs and mms yourself, but if you phone cust. sevices then they can e-mail you the instructions...
It should run faster than before.
Hello all!
I started a new project named OpenCellClient. This application is a scanner for the open service http://www.opencellid.org. This project wants to create a complete database of CellID worldwide, with their locations.
This is very useful for a lot of things, working like a "second GPS", for devices without build in GPS receiver.
More than this, RemoteTracker (version 0.3.0-0 and above) can use this database when the GPS receiver could not find the signal, or if the device does not have this radio inside.
Thinking about the great help this project gives to us, I decide to contribute creating a client for Windows Mobile.
How it works? Start the application and go walk, drive or whatever you want do to outside. You GPS will be turned on and the software will scan for cell towers. Each tower found is stored with their coordinate. You don't need to stay connected to internet spending money transfering data to the opencellid website. You can send the collected data later, in your home, work or any wifi spot. After that, you can make searchs using opencellid web site. And we can't forget: this location will be used by RemoteTracker too.
If you want to give a try, please go to http://opencellclient.sourceforge.net and download the cab file.
Requirements:
- .NET CF 3.5;
- SQLServerCE 3.5.
Keep OpenCellClient up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here.
After install AppToDate, please download and run OpenCellClient to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website.
Regards,
Joubert
looks great thanks for the contribution! i'm getting ready to download it now.
I drive a lot and i'll be more than happy to contribute for France ID's
Very good
Please don't forget this is my first version and may have bugs. If you find one (or more, of course), let me know!
Cheers,
Joubert
Alas, I am not on GSM, but it is fantastic to see you continue to put out fantastic open-source code and tools. Keep up the great work... RT will be built into my ROM always!
Very nice! Will try it on my way to work.
Question: Will it continue to scan when I 'close' the applciation, i.e. put it in the background and use the phone for other tasks, like - äh - doing a phone call or, surfing the web, etc?
Another application using GPS in longer intervals to conserve the battery found out that the initial fixes after the GPS was powered up again (after 3 secs of no GPS usage, the GPS powers down) can be off a bit. I need to check what they did.
Klaus
Ok, I found a small problem: Although WiFi is enabled and a cell is found, the 'Sent to OpenCellID' menu entry is grayed out.
Klaus
Question: Does the API actually give you the Cells 'in view' or only the cells the device is connected to? Because the first would only give you the cells of your provider and not those of competitors.
Although, I understand this would be out of your control, as it happens behind the scenes.
Klaus
How can I send the collected date to the website? This part is always grayed out and not selectable? Still a bug?
xd1936 said:
Alas, I am not on GSM, but it is fantastic to see you continue to put out fantastic open-source code and tools. Keep up the great work... RT will be built into my ROM always!
Click to expand...
Click to collapse
Thank you very much
Cheers,
Joubert
When I exit the app, WiFi gets disabled.
I do have the impression the app stops logging when send to the background, or when the device goes to sleep.
Furthermore my device reacts very sluggish when the app is running in the background.
I hope this feedback helps.
Klaus
krheinwald said:
Ok, I found a small problem: Although WiFi is enabled and a cell is found, the 'Sent to OpenCellID' menu entry is grayed out.
Klaus
Click to expand...
Click to collapse
Hi!
This option would be grayed ONLY if your device is not a GSM device. I will release a new version without this rule. I think the test I did is not the same for all devices.
Cheers,
Joubert
krheinwald said:
Question: Does the API actually give you the Cells 'in view' or only the cells the device is connected to? Because the first would only give you the cells of your provider and not those of competitors.
Although, I understand this would be out of your control, as it happens behind the scenes.
Klaus
Click to expand...
Click to collapse
The API I used only show me the tower I'm connected. I didn't search for triangulation, but it would be a good idea.
Cheers,
Joubert
Lycox said:
How can I send the collected date to the website? This part is always grayed out and not selectable? Still a bug?
Click to expand...
Click to collapse
Hi!
This option would be grayed ONLY if your device is not a GSM device. I will release a new version without this rule. I think the test I did is not the same for all devices.
Cheers,
Joubert
krheinwald said:
When I exit the app, WiFi gets disabled.
I do have the impression the app stops logging when send to the background, or when the device goes to sleep.
Furthermore my device reacts very sluggish when the app is running in the background.
I hope this feedback helps.
Klaus
Click to expand...
Click to collapse
Hi Klaus!
There is a debug option you can turn on. With this option the program create a txt file with debug information you could send to me.
Thank you for your tests
Cheers,
Joubert
I have tested OpenCellClient and have found the following issues:
1. When I am closing the program with the x-Button (top right corner), OpenCellClient is still visible in the process list and use 1,74M of RAM (visible with TaskManager). When closing with the Exit-Button (down right corner) everything is fine. The process/application is not visible in the Taskmanager.
2. When closing the application the WiFi will be disabled also (already found by other users). The debug-Log does not say anything about WiFi.
3. When enabling WiFi (registry key: wifi) the application crashs after starting the scan process. I know that wifi is not yet enabled, but I have tried it .
I have also 2 wishes:
1. I can change the width of the columns, but after restarting the application I have to change the width again. It is possible to save the width of the columns ?
2. All new CellIds should be visible at the beginning of the list, not at the end.
Regards
kuzco
I have a little remark on the way it works.
Currently, when i click start, it opens the table with cell IDs, starts finding etc. Then i click Send and it brings me back to the welcome screen with the progress bar, ok. But after that i'm unable to go back to the table without stopping and restarting
I'd rather have some kind of tabs so i could swap between screens at will, if possible
Otherwise it worked fine, i sent around 50 different IDs today, no problems so far.
kuzco1 said:
I have tested OpenCellClient and have found the following issues:
1. When I am closing the program with the x-Button (top right corner), OpenCellClient is still visible in the process list and use 1,74M of RAM (visible with TaskManager). When closing with the Exit-Button (down right corner) everything is fine. The process/application is not visible in the Taskmanager.
2. When closing the application the WiFi will be disabled also (already found by other users). The debug-Log does not say anything about WiFi.
3. When enabling WiFi (registry key: wifi) the application crashs after starting the scan process. I know that wifi is not yet enabled, but I have tried it .
I have also 2 wishes:
1. I can change the width of the columns, but after restarting the application I have to change the width again. It is possible to save the width of the columns ?
2. All new CellIds should be visible at the beginning of the list, not at the end.
Regards
kuzco
Click to expand...
Click to collapse
Thank you kuzco! Everything will be verifyed
Are you using version 1.0 or 1.1?
Cheers,
Joubert
TrYde said:
I have a little remark on the way it works.
Currently, when i click start, it opens the table with cell IDs, starts finding etc. Then i click Send and it brings me back to the welcome screen with the progress bar, ok. But after that i'm unable to go back to the table without stopping and restarting
I'd rather have some kind of tabs so i could swap between screens at will, if possible
Otherwise it worked fine, i sent around 50 different IDs today, no problems so far.
Click to expand...
Click to collapse
Hi!
Yeah, I know the interface is not good enough But you can see the table using the option Actions/View data.
Thank you for testing!!!
Cheers,
Joubert
joubertvasc said:
Thank you kuzco! Everything will be verifyed
Are you using version 1.0 or 1.1?
Cheers,
Joubert
Click to expand...
Click to collapse
I was running V1.0, but I have tested now V1.1. The problems still exists.
Regards
kuzco