Related
There are way too many posts on this board from ppl who r saying "Piece of crap, I'm gonna take it back and stick it up my provider's...". This post is for you!
I'm no expert (just a disciple of ppl like buzz, vj, etc), BUT I am not afraid of a hard reset or 30, and as a result I've tested everything below, and most of the stuff throughout this forum. I've also followed everything on every forum since being the 10th person in my country to get a JasJar. I welcome critisism, corrections and additions. Please post replies by refering to the step you would change, or insert after. Let's try to stick to proven alternatives and additions though, so that this thread can become somewhat of a 1-stop point for new users (and existing users who do not have the time to learn this alone - and let's face it anyone who has a Universal already, is probably pretty hard working, and already spending an awful amount of time justifying their acquisition in front of their BlackBerry collegues...)
This is written with a single thought in mind; what the hell would my wife do if she got one of these. No-one could blame her for tossing it inside of a week, but with a few changes it's perfectly functional - in fact with a few more changes (also listed below) it's quite desirable.
By the end of this process, your Universal should have a reasonable suite of apps, perfect functionality around all issues solved to date (I've not covered networking tho), a screen flip speed of 0.5s or less, and free program memory of over 20Mb
So here goes, a step-by-step process to get your Universal 100% functional, proven and tested on the HTC Universal iMate JasJar, but should all work on any MDA:
ROM Upgrade: First thing's first. Upgrade to the September-30 ROM (JASJAR_WWE_11353_137_10301.zip). It's available somewhere on xda-developers, or on clubimate for imate users. This is a no-brainer - no posts on this board or any others indicate it's a waste of time. Many posts cover O2 users flashing to this ROM, with great benefits. There are ways to re-install the O2 graphics and apps - if you want ;-) If you have ANY issues with your Universal, bite the bullet and do this; you'll see that the following setup process is not as brutal as you'd expect (I can run thro it in about half an hour - but I've done it many times and have all the apps lined up and ready).
Optional soft reset: Some pppl like to soft reset BEFORE the device installs the default apps. On this ROM, there's no performance improvement, no memory imporvement that can't be covered later (backgammon etc), and potentially some important losses that I didn't hang around long enough to discover.
Sync: Now sync with your PC to get your contacts, calendar and tasks. This is only here to get you up and running asap.
Pocket Mechanic: Download (www.antontomov.com) and install this essential app. You have a few days on trial, and it's necessary for the next steps
Notification Queue: This can be done later, but it's nice to get familiar with this process whilst your queue is small. Using PM, open the notification queue. You may already (yes!) find some duplicate (yellow icon) sddeamon entries. These seem to replicate during an activesync. You can/must delete all duplicates from time to time. You will also, in future, find some "\.\\Notification.....SCRIPT..." entries. Keep an eye out for these. Most mature within minutes of you finding them, so let them expire. Many are future-dated and tightly back-to-back. These can nearly always (I've never had a regret) be deleted without repercussions. If you don't manage these, they tend to breed, and anyone with XDA experience knows what happens when your queue fills up (failed alarms etc). I'm unclear as to where these come from - undoutedly an app that is not behaving elegantly (regular registration checks etc), and if you follow the steps on this post you should NOT find any - ie the apps here do not seem to be culprits. But, keep an eye open...
Registry cleanup: Again, this can be done later, however you'll soon see the beenfit of doing it now. Using PM, run registry cleaner. You'll get around 6 entries, all of which can safely be deleted. If you did not follow step 1, you may have to examine eahc entry to see if the O2 ROM is messier. The beauty of this step is that from now on, you can safely clean everything that PM finds in the knowledge that it's a leave-behind from an app you installed, and now you can install, de-install, and provided you clean up the directories (easy) you KNOW for sure that you've completely gotten rid of the failed app. Winner!
Task closer: Now it's time for your task manager. There's a lot of coverage on this, and any of the following seem to do the trick, ranked in order of simplicity thro to possibly problematic:[list:333ba237cf]
Magic Button (free, includes battery line on top of screen)
GSPocketMagic++ (free, includes cascading menu. Some MDA Exec users claim that it closes something awful that O2 installs, and solves a 7 second flip issue. SEVEN SECONDS!!! If you implemented step 1, you should not have this problem to solve anyway)
spbPocketPlus (not free, and do not allow it to show any storage meters. There are some bad posts on spb, but I've found it just as good as the above, altho it takes up slightly more memory)
WisbarAdvance2 (not free, HUGE footprint, definite performance issues BUT it skins your Universal SO beautifully, that I've gone with this and WAD - desktop plugin)
[*]Basic apps: Now there are a few no-brainer apps to install, that no-one disputes and that are all free. NO BRAINERS:
Total commander (free, replacement for file explorer - way way better)
TCPMP (free, replaces media player, more formats, full screen, way way better)
Batti (free, battry bar on top of screen like spbPocketPlus, small footprint, but if u r using MagicButton you already get this)
TRE (free, registry editor, necessary to run .reg files covered later)
IIWPO (free, AWESOME concept; If your owner info is changed, it SMS's the number you've set with new SIM number and new 'owner' details. Great if someone steals your Universal. Don't bother if u r not happy with a little installation effort)
BT icon (free, on this board somewhere, gives u an icon on your today tray that shows BT status and allows u to jumps to settings>connections>BT)
BT switch (free, on this board somewhere, several apps that turn BT on, off, or toggle)
Battery Uptime (Optional: free, today plugin that tells u the battery status BUT it's way more useful: you get to see actual running time vs uptime, and remaining running time. This gives u a good feel for your battery consumption rate under different scenarios and helps overcome a LOT of concerns around thinking you are draining faster when actually you are just using the device more)
apReminderPlus (free, AWESOME repeating alarms. Beauty of this is that is seems to be independent of WM5, in that it keeps an eye open for any alarms, and pops up to do its thing if it sees one. WAY beter than built in repeat system, and makes me feel good that I have alarms covered off in case the old wm2003 bugs start to appear again)
VJSMS (free, on this board, gives u 1-click to send an SMS. Note that .lnk file should read as follows INCLUDING inverted commas:
\Storage Card\Program Files\VJApps\vjsms.exe" "123
Change path and number of course. Number can also be a name.
Sad to report that VJDailer doesn't work on the universal. This would be awesome
[*]Settings: Time to do your basic settings:
speed dials
power and backlight
voice dials
Owner info
ringtones and notifications
DO NOT set regional settings if u r using PI (below)
[*]PIM: OK, time to replace the CRAP calendar built into WM5. CRAP CRAP CRAP! Disgracefully, embarassingly CRAP. Hell, symbian ship better default apps with the OLD Psion S3 and S5 than this! Now, I use PocketInformant. Latest release works well on JJ with 2 livable issues: Landscape flip screws up Monday/Tuesday in week view, and you MUST NOT set any regional settings what-so-ever, else you get the blank calendar view bug. AgendaFusion is due for a WM5 release any day now. Other than that, I don't think there is much that works on the Universal - correct?? :?:
[*]Reg fixes: Now there are a few no-brainer registry hacks that you should run. You can find these as cab files on this board, as registry keys under the wiki page, else as .reg files on one of my earlier posts (fastest method):
Buzz's BT headset (prevents BT from turning off over night - no brainer! Thanks buzz!!)
"Always on GPRS" (search this board - keeps GPRS/UMTS turned on - awesome!)
Date & time in title bar (why not)
Menu and popup fonts 700 vs 900 (it's cosmetic, but on our nice VGA screens, it seems daft to have a look n feel that's SO QVGA)
PIE homepage (prevent 'e' button from going to clubimate page)
Terminal services cache (increased cache uses memory during terminal services, but it's WELL worth it to eliminate black blocking issues)
Turn IR off (unless you have a good reason for keeping it on)
[*]Extra apps: There are several very useful apps, that work reliably and do not have an adverse impact on your Universal.
eWallet (not free, desktop sync does not work, but rest is very useful)
Pocket sudoku (not free, but it's SO much fun!)
Mobipocket reader (skinny version is free, for mobipocket ebooks - ebooks fully being 25% of your devices functionality along with PIM, phone and internet access. Google beta 5 version with full VGA support)
uBook (more eBook formats. Not free but usable. VGA support)
1-calc (cos built in calculator is SO crap)
GPRS traffic monitor: We need a GPRS/3G monitor. spbGPRS monitor does NOT track the usage of yoru device as a 3G modem - which is where u chew up traffic costs. IP Dashboard has similar issues.
[*]Memory:Now, I'm the first to say that I don;t fully get this yet. There are a few things that the posts suggest should reduce program or storage memory - but don't really seem to do so. Try them and let me know results with more scientific before and after checking please:
Remove backgammon & skype, and re-install to SD card
Remove the 1Mb .tsk themes from the \Windows directory. You cannot delete them, you have to create new files that are smaller and copy them into \Windows and overrwite the larger files. Search this board for some sample small files provided. I didn't find that I got any memory back...???
Ditto for .cab files in \Windows
Do not use these big theme files - by using smaller themes you should get more program memory.
A couple of dudes have started threads on getting more memory and clearing out \windows files - but there are no good responses yet...
[/list:333ba237cf]
Right, that's it! As I said above, I welcome input and feedback - but let's keep it hi quality so that this post perhaps gets stickied and we can get less of the "Buy my JasJar before I post it on eBay posts". Of course there are a load more apps you can add, but most give issues (eg TomTom) and posts on this board cover working around them for ppl who have to have these apps. This was a good, strong, basic config.
Hope this is helpful to some.
Some well-thought out words there, craigiecraigie4. However, I'm a firm believer that it's a bad move to install anything that I REALLY don't need. So far, my MDA Pro has a default installation. None of these "essential apps" are necessary. Indeed, half of them seem to only exist so that you can add other "essential apps" :wink:
If/when a better browser comes along, I'll investigate. Other than that, I find the messaging client perfect (works nicely against Exchange server); Terminal Services could be better - just giving me true full-screen support would be enough. And I'd like better Wifi support - I want, for example, to be able to name my SSID. IMHO, with desktop PCs as much as with PDAs, every time you install a piece of software, it ultimately makes the system *worse*. ie the result is a damned site less than the sum of the parts.
so, taking each point with my (possibly unique, certainly cynical) POV
1. ROM Upgrade
Didn't bother. It adds nothing that I'd use apart from MSN and that would just suck up time that should be spent on worthwhile things :lol:
2. Optional soft reset
Yeah, I may do this but, TBH, T Mobile install very little stuff and it seems to work, so I ain't fixin' it.
3. N/A
4. Pocket Mechanic
I can't see that I need this.
5. Not quite sure what the problem here is. I've been using XDAs since day 1 and never encountered the problem. YMMV
6. Registry cleanup
Never assume that some badly-written software doesn't depend on some default or illogical registry setting. YOU HAVE BEEN WARNED
7. Task closer
OK, not a "two-click" operation, but in Settings/Memory, I can close running applications. No new software needed.
8. Basic apps
Total commander - erm, yeah, it's nice and everything and does a better job than the standard affair. However, 99.99% of the time, error: +/- 0.01%, I find I don't actually need any of that extra fluff.
TCPMP - granted, I only use MP to listen to WMAs I record off the radio to listen to later.
Batti - On my Today screen, there's a little icon I tap and it shows me my battery state. I can also see this using Settings/Power (or whatever it is)
TRE - See previous warning about effing about with your registry
IIWPO - nice idea :lol: but no substitute for insurance or taking care
BT icon, BT switch - I've never used Bluetooth in my life. YMMV
Battery Uptime - See prior comment about battery state indicator
etc
I'm sure that more people will find your advice usefull than mine, but just like to point out that, out of the box, these devices (at least MDA Pro) seem not to be too wide of the mark. For me, at least.
This is very helpful...thanx!
You mentioned that the soft reset before installation of imate stuff may lead to some problems in the long run. As I have opted for this strategy and have only installed two cab files (btpatch and a file that brings up the smart dialing), I would appreciate it if you could tell us what kind of problems we might confront. Also, is it too late to add these cab files after the fact (that is given we have synched contacts and added other programs)?
Cheers, apap
craigiecraigie4 - very useful advice, I think for everyone with a PPC. I don't have a universal, but good tips either way.
I didn't realise VJDialer doesn't work on WM5. I'll look into updating it when I get a new version of Visual Studio (or a WM5 device!).
Good work man!
V
Hi VJ - yeah, I'm afraid that there are a couple of posts on your primary thread about the "no command line specified" - no matter what combinations we try in the .lnk file. Saw your comment that another crowd charges for such an app. I'd happily contribute for the benefit of quick-dials - would be awesome along with WAD. You might want to mention your app on the WAD (lakeridgesoftware) forums - many 2003 users there who would LOVE this. With WAD u can have popup boxes on your skin, so with vjdialer one can popup and view of quickdials. awesome.
craigiecraigie4 said:
[*]Buzz's BT headset (prevents BT from turning off over night - no brainer! Thanks buzz!!)
[*]Menu and popup fonts 700 vs 900 (it's cosmetic, but on our nice VGA screens, it seems daft to have a look n feel that's SO QVGA{)
/quote]
where can i get the 2 things above...looked but cant find
thanks
Click to expand...
Click to collapse
vijay555 said:
craigiecraigie4 - very useful advice, I think for everyone with a PPC. I don't have a universal, but good tips either way.
I didn't realise VJDialer doesn't work on WM5. I'll look into updating it when I get a new version of Visual Studio (or a WM5 device!).
Good work man!
V
Click to expand...
Click to collapse
hi vijay!
I'm running on wm5 on my xda2....and am using vjdialer and vjsms extensively!
I dont think there are any problems with VJDialer's compatibility with wm5....
S
spbPocketPlus (not free, and do not allow it to show any storage meters. There are some bad posts on spb, but I've found it just as good as the above, altho it takes up slightly more memory)
Click to expand...
Click to collapse
I have this running on my Exec and have storage indicators for memory and SD card on today screen, or are you talking about something else?
Btw, I found that my Exec runs faster with pocket plus than it did with magic button and pocketmagic++
Cheers
J
craigiecraigie4
Thank you VERY much for your extensive effort - this really does helps a lot :!:
That's an awesome post craigiecraigie4, some hard work went into that one dude.
Now my post below is not intended to be better than the original, merely another option. craigiecraigie4's use of the device is obviously a lot different to mine, as I work in an office, and am out of connectivity for maybe 3 hours of travel a day max, and never at weekends unless I go out. I'm on a scooter or a tube train so no connectivity is possible during travel for me.
What we are describing is our comfortable loadsets or configurations of our little systems, and that's what the stuff down here is, the Bongo configuration if you will. :lol:
I have made my comments against craigiecraigie4's original titles, and added a few apps of my own that I have.
[*]Weirdness for Hallowe'en :shock: After a hard reset, then sometimes the crosshair pointer setup would be real slow, and others it would be fast. Just in case, I did it until I had a fast one and proceeded from there. Don't know what/if any difference it makes, but that's what I do.
[*]ROM Upgrade: As there aren't any upgrade ROM's out there execept for the iMate one, I wouldn't until the new carrier ROM's are posted. I agree with CraigieCraigie though. Sooo, why not then? Warranty is the answer. Although I think in reality they wouldn't wash their hands of you just because you dared to use someone else's ROM, the carrier techies are generally not allowed to instruct you in the art of repairing your device with anyone else's ROM except their own, and so you would need to wait until your carrier released an upgrade and they could tell you how to do it.
[*]Optional soft reset: Definitely. And be selective about the manual .cab installs (installing total commander or the like first to see the Ext ROM). There's generally something in there that forces the device to behave in a way you don't like. An example is the internet button taking me to the t-mobile home page all the time. I hate that so I didn't install the relevant .cab.
[*]Sync: Now sync with your PC to get your contacts, calendar and tasks. This is only here to get you up and running asap. <-yeah man
[*]Pocket Mechanic: Download (www.antontomov.com) I bought this. It's good meaty tools you would get in a full Windows OS that M$ didn't put in WM5 yet.
[*]Notification Queue: Did it once, didn't do it after my last hard reset and TBH, haven't felt a need. I probably would do if I installed it and saw a gazillion notifications spamming my inners up. :lol:
[*]Registry cleanup: Haven't done it, but a careful look and selective delete may be of some use. Can't be arsed is the honest answer
[*]Task closer: Haven't bothered this time to minimise my number of concurrently running programs (absurd logic eh :wink: ). I only use a certain few apps, and as they're few don't notice a big slowdown from having them minimised if they don't close fully
[*]Basic apps: Here are Craigie's apps with my comment, and my loadset apps
Total commander - yeah man, schmokin
TCPMP - I only use mp3's so no point for me. Perhaps if I need to watch videos I will reinstall it.
Batti - I use Spb GPRS Monitor, v2.3.0, b525, and it has a battery icon, and I have the icon on my today screen, and I can guess it most of the time.
TRE - I use BitsInside Regedit. Also free and I like the Win 98 feel to it.
IIWPO - Great idea, I didn't know it worked on Universals. I will do this cos you never know if it might lead you to a thief. They'd have to be non-savvy theives of course else they'd hard reset it before using the new SIM
BT icon - I use the FN + -> combination to get there or the connectivity icon on the status bar.
BT switch - as above
Battery Uptime - If you want to learn then great
apReminderPlus - I don't use the alarm function
VJSMS - Inbuilt in WM5 is fine so far for my needs
Agile messenger - very thrifty use of bandwidth, like <10% of MSN (really) and free at the moment, but will pay for itself in bandwidth charges very quickly for most people. Suck it and see
GPS Viewer - because I have a Holux GPS and want to verify connectivity sometimes
Pocket Hack Master - because I like to crank it up to delightfully unstable 624MHz sometimes, but haven't need to with my installation as described here oddly enough. It's fast enough for me so far.
Pocket MSN because I want the Hotmail to appear in my messages application. I use Agile to IM people as above
TomTom Navigator 5.1 because it's awesome
[*]Settings: Time to do your basic settings:
speed dials
power and backlight
voice dials
Owner info
ringtones and notifications
DO NOT set regional settings if u r using PI (below)
[*]PIM: OK, time to replace the CRAP calendar built into WM5 - I agree it's crap, but I don't need a decent one. I am a simple soul.
[*]Reg fixes: - If you want to
Buzz's BT headset - haven't noticed this issue yet, bet I will tomorrow morning now though
"Always on GPRS" No good for me - 40megs/month tariff limit
Date & time in title bar (why not) - cos I know the date and time.
Menu and popup fonts 700 vs 900 - haven't done it yet. I like the size
PIE homepage - is done for me through my selective Ext ROM install
Terminal services cache - I don't use it yet
Turn IR off - yeah agreed waste of space most of the time.
[*]Extra apps:
eWallet - I don't keep details like that on my phones.
Pocket sudoku - I read books, so insert MS Reader for me there
Mobipocket reader - doesn't support .lit (MS format), and I read .lits and .docs so far. Wait until I run out of books though... :lol:
uBook - haven't needed it ....yet
1-calc - but the inbuilt calc does +, -, * and / so it's cool for me. I'm not a physicist
GPRS traffic monitor - spb is fine for me as I don't use it as a modem due to bandwidth limitations and being surrounded by connectivity in London.
[*]Memory:Haven't done these, but they look sensible if you can be arsed
Remove backgammon & skype, and re-install to SD card - I don't have them or use them anyway. How do you play backgammon? I went to a comprehensive school
Remove the 1Mb .tsk themes from the \Windows directory. I only have 3 default ones and use the standard blue theme. Functionality and not form is my motto :wink:
Do not use these big theme files - Good advice bro' (or sis)
Hope this is helpful to some other people :lol:
hi
Does ROM update invalidates the manufacture warranty?
Jatt
Menu and popup fonts
can anyone explain how to change the Menu and popup fonts from 700 to 900. Is it a registry hack?
jatt said:
hi
Does ROM update invalidates the manufacture warranty?
Jatt
Click to expand...
Click to collapse
You would need to ring them up and enquire. With t-mobile, the tech dude just said they wouldn't be able to help me if I bricked my MDA until t-mobile released a ROM that I could download and use to revive the MDA. So, not invalidated for me, just much reduced support. Until a new ROM si out, all they can do with misbehaving devices is offer a replacement at the moment.
Illwil - the font size is a registry hack - search as it's here on this site somewhere.
joebongo: nice perspective. now users can see 2 extremes; O2 with much office usage, vs HTC with much out-n-about usage. Thanx 4 the effort.
illwil : search for my post on reg tweaks and run the .ren file 2 got 700->900 or rather 900->700
codiac: agree. I fiund spbPP 2 b perfectly well behaved, but there is so much bad press on it in this forum. perhas it's an O2 rom issue - pretty sad 4 them actually
xiasma: there truly do see 2 b an awful lot of ppl who think their universal is junk. this is intended 2 help them get up n running. some ppl got lucky (htc rom or just happy with functionality that actually works well) and they probably should not fix what aint broke. But one day they may want 2 push the envelope a little...
craigiecraigie4 said:
codiac: agree. I fiund spbPP 2 b perfectly well behaved, but there is so much bad press on it in this forum. perhas it's an O2 rom issue - pretty sad 4 them actually
Click to expand...
Click to collapse
PocketPlus is working OK for me on my O2 Exec...
Hello Everyone.
I proudly received my Exec this morning, only to find that it ran like a bag of S**t.
I removed the connections.exe, and the active files from my windows/start up folder and things improved dramatically.
However I am having a problem with the activesync.
I have set up the partnership with my laptop running activesync 4 and when it communcates it does it without any problems, however as soon as I connect my usb cable between my Exec and my laptop it takes a few minutes for the charging LED to come on on my Exec, and a while longer before Activsync on my pc recoginses it.
Does anyone else suffer from this problem?
Cheers
You removed connections.exe and now u have a connection problem...
Try removing things 1 at a time.
I definitely don't have this problem.
FYI, on my HTC all I have under startup is:
sddeamon.lnk
batti (i installed)
apreminderplus (me)
iiwpo (me)
O2 is definitely adding stuff that does not seem 2 b required by htc.
The only shortcut I have in my Windows\Startup folder is 'Services' and I have no problem with ActiveSync, voice dialling (with the built-in dialler) or anything else. I have no idea what the sddaemon one does but mine runs fine without it.
fatspark, your problem might lie with your laptop rather than the Exec? As a test though, are you able to try ActiveSyncing over Bluetooth? See if it's any quicker. If so then maybe it's a USB problem. Dunno.
IIWPO
Can someone explain how to install the IIWPO in the extended ROM on the JASJAR ?
I think it is different than the EXEC, where can I find instructions ? I am willing to handle the hassle
Cheers SiliconS
The problem is a driver issue on one of my laptops, I installed activsync 4 onto another one and all is ok.
Cheers.
Fatzzz
Finnish Aali Alikoski, Academic Developer Evangelist of Microsoft Finland, has just released a highly useful application, SMS Notifier, along with its source code.
The application offers some really nice and, up to now, to my knowledge, on the Pocket PC Phone Edition platform, unprecedenced functionality: it waits for unanswered incoming calls and, depending on the configuration settings, it either sends an SMS message to the caller (with configurable contents), possibly containing also the end time of current appointment (this is also configurable) or adds an item to the system-level Windows Mobile calendar (containing the caller info).
The latter functionality is nothing new – you can check the caller's identity and the call date/time in any low-end mobile phone. The former – that is, the SMS feedback –, however, is really long-awaited!
Downloading and Installation
You can download the application here. Transfer the CAB file to your PDA and execute it there.
If, after installing and upon starting SMS Notifier, you're presented this error message, make sure you download and install .NET CF 2.0 from Microsoft. Make sure you install it in the main memory. Also note that, as the application heavily relies on the new, connectivity/database-related libraries of .NET CF2, it's not very easy to port it to run under the earlier Compact Framework library. (For CAB lovers, you will only need c:\Program Files\ Microsoft.NET\SDK\CompactFramework\ v2.0\WindowsCE\wce500\armv4i\NETCFv2.wm.armv4i.cab ; you can also download it from here (to avoid having to download the 24 Mbyte-long MSI installer).
Configuration
On the main set-up screen, there're some checkboxes in AND relationship. The first one, Send SMS to unanswered callers, instructs the application to send an SMS to everybody that tries to call you but his or her calls remain unanswered. Using (not disabling) the second two checkboxes, however, you may make the application not send a SMS to anyone that calls you, just to the ones that call you during an active/busy appointment.
The checkbox/text input area at the bottom makes it possible to report the end of the current appointment so that he or she can know when you are reachable again.
The Calendar tab contains only one checbox, which instructs the application to enter all the incoming calls into Calendar.
Note that the configuration settings are not correctly saved/restored, as the author also points out.
Usage
To use the application, just start and configure it to your liking. Do not click the Quit button – then, it won't send your callers any SMS. Just let it run. You can, of course, suspend the PDA while you do so and also minimize the application. This also means you can safely start it from \Windows\Startup (just like the other highly recommended application, PMRecorder – please see this article on it if interested) – if it's running in the background, it'll safely catch all unanswered calls.
Other stuff
I also recommend the author's blog here. Don't be taken aback of some of the material's being in Finnish: there's nothing really interesting in them for non-Finns (the Finnish blog posts are only about local, Finnish meetings, conferences). Unfortunately, some of the other Finnish .NET bloggers (see the links in the lower left of the page) post exclusively in Finnish, even highly technical stuff that would be interesting for non-Finnish speakers too. (Feel free to ask me in my blog for a public translation for some of them if really interested.)
thanx man .. jus tried it . this application actually works .rockinnn
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
oops
PhoneGuy said:
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
Click to expand...
Click to collapse
Did you try to install it in the main storage or the storage card? Only install it in the main storage.
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
PhoneGuy said:
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
Click to expand...
Click to collapse
I've encountered the same when I first tried to install it on a storage card. Then, subsequent installs to the main memory didn't succeed either. A hard reset helped.
I have installed it and it seems to work well. My only concern is that it seems to use the notification application of the phone rather than the call list of the phone. The reason I say this is because it puts a calendar entry in when I miss a call then adds another entry when I check the notification of missed calls.
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
thanks,
Edwin
also, it seems if I am on the phone when I miss a call it uses the name of the person I was on the phone with and not the person I missed.
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
ethorn said:
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
Click to expand...
Click to collapse
That's what happens for me... I stopped using it because of the duplicated sms's...
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
Tried it. Keep getting "Cound not find resource assembly" error.
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
after using the Ruttensoft on my Qtek, i can no longer creat SMS, when I click on new, only a while screen appear, cannot input both phone number and Text.... did anyone meet the same ???
meschle said:
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
Click to expand...
Click to collapse
No it didn't... you didn't use this program. we are trying to give feedback to the author of this program which has so much more potential than the limited software you used.
No sms works for me even when activated. my qtek rom is 1.6.7.1 maybe that's the diff. Sorry ethorn could start a new thread if you like but may help some people if the other prog don't work for them.
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
no I am all for putting ideas of other products, but the way you worded it sounded like this program that Menneisyys worked on worked on your phone and that the version of his program you used was at another link.... my problem is that neither are true. Software Guru did things right and just introduced another alternative.
thanks guys
Software Guru said:
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
Click to expand...
Click to collapse
Can you provide a link? Did a google and no results found.
Cannot download the SMSNotifierSetup cab
Can someone please post this as i cannot seem to download it.
thanks
I have been searching the web for years trying to find the solution to what I would consider is a very simple requirement:
From Outlook on the PC, right click on a contact and dial to a connected Pocket PC via Activesync.
Now, either I am alone in this world, or my search capabilities are flawed. This is a function/capability I used to have with my old Sony-Ericsson & I am missing it badly - yes, I know there is a Powertool that provides you with a "window" to your PPC, but I have found that this is somewhat flakey, doesnt like Landscape mode and frequenly freezes the PPC.
Further, I have enhanced my Access application to perform the dialup via the CPROG.exe, what I am after is the same or similar functionality direct from Outlook... please help!
Is there anyone out there that can help me?
looking for the same
it seems we both live in the same world
Come on guys, are you really telling me there isn't anything out there at all?
err so remind me why one would want to do this other than to write some annoying dialer program?
OK, rather simple, really:
Working from Desktop PC, with PPC connected via ActiveSync and sitting in a cradle - by definition, this makes it a pain to access the PPC.
Current Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact
3. Look at number
4. Lean over desk, usually spilling coffee, or unintentionally moving to another website
5. Try to use Stylus to dial number (or use Intellidialer to access the same contact you have in Outlook)
6. Make call
7. Hope you have put in the right number
8. Call goes to voicemail, throw phone against wall
All in all, a rather cumbersome scenario.
Preferred Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact, or right click on Contact
3. Select number to dial
4. "Magical programme" sends dial request to PPC
5. Make call
6. Call answered, sale made, kids go to expensive Private School and Wife loves you forever
Makes sense now?
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
st3v3 said:
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
Click to expand...
Click to collapse
Did you ever read his first post?
yeah for about 4 or 5 seconds, gave pity and responded for the simple fact no one else did and thought i would show some interest.
at least some of us make an attempt eh helterskelter
Thanks for your pity, but I would prefer to know what, if anything, is out there. Obviously, I was mistaken in believing this was the font of all wisdom and exciting development in the PPC world. I truly cant believe that nobody has thought to put this together. Funnily enough, there is one that does this via Bluetooth, but as the XDA Mini wont allow multiple Bluetooth connections, I have been "forced" to find out if there is anyone clever enough to make this happen :sigh:
Hi!
I miss this funtion in windows mobile. This is the only reason why I consider to go back to my old Ericsson.
A little bit strange that it works with other software but not with Microsofts own?
Using .net you might be able to write an app (server) that listens on an open port on the PPC for coms from the active sync pc. When a certial string is sent down this port DIAL(123456789) the app calls the dial command in .net framework.
Maby its time to bite the bullet and code it.
Im having to with another app
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
mlk said:
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
Click to expand...
Click to collapse
Nope this can then be done using windows scripting host cause its the outlook that you need to automate not he PPC.
See the 3rd item on this page.
http://www.cooperstown.net/tips/outlook-address.html
It should be able to help you out just make a custom toolbar button in outlook to call this piece of code and your away laughing.
EDIT:
Where did you fiind the info on cprog. Is there any way it could help with this
Unfortunately, I cant remember where I found the information on Cprog - only thing I have is the "How to call a number".. tried for some time to find various parameters to no avail... not too sure if this will help with your problem.
OK Guys, I finally bit the bullet - thanks Shaun for the "hint" - and coded a Macro to perform this.
It may be a bit clunky and as a "non-developer" I don't have the requisite nous nor software to distribute this as a plugin. For this reason, I have provided this as completely open (as far as I can tell), so if anyone wants to take this further, I hope I have started you on the track and that you wont forget the initial starter!
For those of you that wish to install - you will need to access your \Documents and Settings\<username>\Application Data\Microsoft\Outlook folder and extract the zipped file. My recommendation is that you save the existing one first, just in case you have written a bunch of Macros - wouldn't want to get any nasty surprises here - remember, Outlook only has one Macro bucket and this file is it!
Once you have installed and either provided your own Digital Certificate, or have an appropriate level Security within Outlook to allow this to run, simply add the Macro "Dial2PPC.Dialit" to a toolbar both in Outlook (that comes up in Contacts preferably) and in the Contact Form itself (use "Customise" as you would in any other Office application to facilitate this).
From here, it is as simple as selecting the Contact from your contact list and clicking on the Macro button you have setup - then follow the instructions, make sure your PPC is connected & Dial away!
Please note that you will need to have installed RapiStart from the Windows Mobile Power Toys and that I make no assertions that this is bug free, so use wisely - although, I am pretty sure I have most of the bugs out.
Again, this is provided open & free, so if you make an enhancement, please share it with the rest of us!
Hope this solves the "issue" for you guys as it has done for me!
DialViaActiveSync
mlk – thanks very much for your macro. I’ve taken the liberty of rewriting quite a bit of it (everything other than the part which communicates with the device, really), and have made it available under the GPL v2.0, in order to preserve its “Free” status.
In terms of changes, as I say, I’ve rewritten most of the back-end functionality. In particular:
1.) Adding items to the listbox – this now only shows fields which have a valid phone number, so there are no empty spaces
2.) Dynamic resizing of the form
3.) Form and “Dial” button captions show the name of the contact
4.) Where a contact has no valid phone number, a dialogue to this effect is shown
5.) You need to select number from the listbox before the “Dial” button is available
6.) You can double-click on a number in the listbox to dial it
7.) General tidy-up of some of the variable names, and removed a couple of unused variables
Installing my version:
I’ve exported the relevant files from the Project, so there is no need to overwrite the existing Project file – just open Visual Basic Editor (Tools / Macro in Outlook) and select “Import” and the browse to the relevant folder.
I'm a lurker rather than a poster on here, but, any questions, please do let me know.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Neil,
Champion stuff mate - I have always said it is best to wait for Version 2! Just one question: The ".frx" file, what is that for?
Mark.
It's the binary file for the VB .frm - it's not something you manually import, but it's necessary for the display of the form.
BTW- I've changed the contents of the .zip file for download- realised that I'd left in a line (an extra ResetState call) which stopped the whole thing from working - new version uploaded (same name) should be fine.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Thanks for this, maybe should change my mantra to: Wait for V2.1?
P.S. Thanks for coming out of the lurk!
Nah- v2 was fine... if I hadn't been meddling with it...
Managed to put the reset call before the RAPI argument, which, of course, wiped out the phone number it was trying to dial... Stupid, stupid, stupid -embarrassing, but at least easy to fix.
I guess that the next step is to try and implement SMS via ActiveSync - not sure if cprog.exe handles this, though, so it could be rather more complicated...
It would be may be good to create a list of known bugs and other problems with the WM6 ROM for Typhoon. Please post here if you know about some bugs or strange behaviour.
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
lot of software incompability, mostly games,
-bug tcmp looks like the same most games have; there is sound but the screen will freeze in a few seconds (sound continues )
..tried to add T9 language according to instructions described at Ronswens pages for WM5. During writing sms I can choose the new language, but after choosing it only beep occurs when pressing a key. I suppose there should be changed also some another key in registry...do we have some experiences already with the T9 languages on this WM6 rom?
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
I have this problem too and I back to wm2k3
r0c0 said:
lot of software incompability, mostly games,
Click to expand...
Click to collapse
I have found the decision:
1)
We open "exe" a file with game in any HEX-editor, we find gx.dll and it is replaced on g0.dll
We clean the signature from a file by means of SignRemv and it is done new by means of Signed tool
To place the changed file back, and a file g0.dll to place in folder Windows
or 2) To replace a file gx.dll in folder Windows, in any a file-manager to put "read only" and restart (there can be problems with other programs)
As example Bustem
PS: forgive for my bad English
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
how do you make application unlock on wm6 ?
Java
is there Java support with this WM6 ROM? I can't seem to find it. Very useful for Opera Mini and Gmail standalone app.
sebip said:
how do you make application unlock on wm6 ?
Click to expand...
Click to collapse
Use regeditSTG2.exe to modify the following phone registry keys:
- HKEY_LOCAL_MACHINE\Security\Policies\Policies0001001 = 1 (that will enable the rapi_config, 1 means full access to rapi config, 2 means user controlled access)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001005 = 40 (that disallows the check for security cirtificate etc)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001017 = 144
Run SDA_ApplicationUnlock.exe from the PC with the phone connected via ActiveSync. This will unlock the phone.
Disconnect and switch the phone off then back on again.
Hi,
I can't use voice talk (via handset bluetooth) before in wm2k3 and wm5 i have the fonction to add voice command with contact, but now no.
It is normal ?
Thx.
...I also revealed interresting behaviour when you are trying to connect to internet via GPRS. There sometimes occurrs error message that it couldnt be established GPRS connection because of missing GPRS coverage. (the "G" is also missing in homescren icon bar). But I am sure there is no GPRS coverage problem in my location.
So in this case you have to go into the phone settings and choose your network again. Afterwards when you are re-registerd in your network, the symbol G is present in iconbar and you can run the GPRS connection. Sometimes prolongomenous procedure...
I had pretty much the same thing as a few of the others.
Xphone11
WM5 - WM6
It flashed all ok, the phone booted all good and worked fine - but then after around 15 min of running, reciving one call and 3 failed attempts at sycning it died.
Well - actually, I re-booted it for something and it never came right after that.
These are the issues which appeared;
Contacts wouldn't open (yet the proccess was fired),
Calendar threw a 'missing file' error,
Start menu wouldn't work (no response from the button),
GPRS service was dropped ("no service available" - even though there was and the phone could see it if you seeked for it),
Yet the phone recived text messages while in this state and while calling the phone it just wouldn't do anything - yet to the caller it would appear to just ring and ring (not a provided service).
An interesting thing - I found that by making a change to the home screen or theme would allow the start menu too function as it should and the the clock to be displayed on the home screen.
Could be an area worth investigating....
I've had a taste now.... I want WM6!!!
What can I do to help?
...it also would be interresting to know whether there is a possibility to run the USB modem - I couldnt find it in start menu/accesories nor in the windows folder...
How to install for QTEK 8020 (T-Mobile SDA) joystick? please help... fuctional joystick in WM06 (my english low sorry)... right is up, left is down and left not functional and right... ???
///... please delete topic... ///
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
DoctorT said:
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
Click to expand...
Click to collapse
Because WM6 for Typhoon Error on Dumprom.
WM6 looks fantastic, however...
I also have a few disappointments the most important of which are:
- No "Headset" option in the profiles menu!!!
- No STK menu!!!
- Very easily crashing on games and some progs (hope to fix it as stated above)
and the camera is definately worse than in 2003SE
..various language t9 cab files - I tried it and it works fine on WM6
http://melgurth.ovh.org/
do anyone try the standard calculator in wm6 ? It show error in my c500 so I have to use other calculator program
..it looks that my calculator works properly...
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.