I 'm now using 2 gb of memory. When i turn off my screen for a moment and trun on the screen. There is nothing comming up. I have to reset my hermes. Pls advise..what 's wrong ? Before i used 1 gb of memory, i never seen this problem.One thing i use calendar plus on the today screen.
After selling my Wizard to get the Hermes, I have discovered that the Hermes is a VERY unstable device.
I have experienced (and still do sometimes) what you are experiencing. From what I can see, this is normal for this device. If this continues, I'll have to sell this and get something else. The other day my device did this and I called it from my house phone to see if it would even ring, and it did not. I guess I could live with the PDA locking up, but if it interferes with the devices primary function as a phone, it's totally unacceptable.
jcute, i was having this problem for a bit, but my issue only occured when it was on the charger and i temporarily shut off the screen, it would then not turn on and would have to softreset every time
i noticed this problem occuring after installing some software including weather software (cant recall exactly which) and skype, not sure which one was the main problem but wasnt using either hence their uninstall and correcting of the problem
good luck, try removing some recently installd software and seeing if the problem persists and perhaps try removing the microsd card and running ur phone without it for a bit to see if the problem is the card
time for rom upgrade ?
thanks for info. I tried to unplug micro sd 2 gb and press power button again ..it 's work !!after that i plugin micro sd again but some icon 's missing at the today screen. Ex. resco today icon , psshutdown, photo contact.....So the question is that i have to do this everytime when screen 's off???
After upgrading to AKU 3.3 and installing my programs only to the main memory, I've noticed far fewer lockups as opposed to before when I ran many programs such as Pocket Player or GPRS monitor from my 2gb sandisk.
I guess the moral of the story is, try not to install programs that access your memory card while your phone is in sleep mode.
DonnieZ said:
I guess I could live with the PDA locking up, but if it interferes with the devices primary function as a phone, it's totally unacceptable.
Click to expand...
Click to collapse
I would not get a Hermes if I wanted it to be a phone primarily. IMHO most of these devices XDAs, are primarily PDAs with a phone tacked on.
Just a humble observation
Mike
my problem is when i scroll or drag the side bar too fast (inside memory card),the device will hang and need to soft reset.
can anybody solve this problem??
Goto www.softwinter.com and try out storage tools. I've found that a regular repair and defrag help the load times from the storage card tremendously. Also, someone mentioned above that reformating your storage card with fat32 helps and I too can confirm that. Let us know if that helps or not.
Lance
one more thing, when i reset my hermes, it hangs at the welcome screen. I always get this problem.
Related
Hi all
In the last 10 days I had 3 random hard reset's on my qtek 2020.
Rom Version is 1.72.00WWE ,upgrade was done a couple of months ago.
The last reset happened today, and on the other 2 the behavior was the same, phone was just sitting, tried to use it, main screen came up...wouldnt respond to anything, tapping on the screen or pressing any buttons, just plain old stuck on the main screen. Tried a soft reset, image just get's all confused, could still see the today screen, backlight would go off and wouldnt move anywhere, tried soft reset again, wouldnt do anything.
Just knowing what was gonna happen....took batery out, put it back in...and that's it, everything is gone again. since my last forced hard reset no other software was installed besides the basic one's.
What should I do to troubleshoot / solve this? any tought's?
Thanks for any advice you may have.
found this:
The current build of XDA II ROM contains a bug that can cause a hard-reset when a program reads data from a storage card. Due to the bug in ROM, accessing storage cards may cause complete data loss on XDA2 compatible devices. More often it happens with programs that access a storage card in a timer (like Spb Pocket Plus). There are no known solutions for this problem so we have had to disable the showing storage cards indicators on XDA II. We'll enable this feature when HTC fixes this bug in their ROM.
http://www.mtekk.com.au/browse/page1020.html
could it be related? today when it happened i had it sitting on my desk playing mp3 from the storage card with the media player....
http://forum.xda-developers.com/vie...ghlight=&sid=b692b29b60bba481367f5cf419898b16
looks related..
thanks a lot, i did a search for qtek...not spv that's why i didnt find it.
either way...im going back to the store and try for a replacement...or an upgrade to the 9090....
thanks :?
I have an O2 XDA2. I just took the phone out of my jacket pocket to find that it wanted me to calibrate the screen. It went on to take me through the whole set-up wizard and then I found that all my data and installed programs had been lost
I'm guessing the phone decided it wanted to reset itself!
Does anyone have any idea why this might have happened so I can avoid it happening again?
The phone had plenty of battery power (approx 80%). It had plenty of space space (approx 28MB). I hadn't recently installed any software although I did uninstall Pocket Money on the weekend. I also created an IMAP email account then but I've had no problem with the phone since then until now.
Any ideas? Thanks very much
would prob be a good idear if you stated the rom version you are using
Sorry, It's 1.60.00 WWE
I have never upgraded it as I haven't the first idea how or what the implications are.
the latest officail rom is 1.72
if you get that from their site you will not get warrenty issues
when i used 1.66 i had lockups from time to time
after i got 1.72
i havent had any issues
I don't really feel comfortable upgrading it as I haven't the first idea what to do.
How do you normally reset a device? Is it something I could have done by accident?
there is a little hole in the buttom of it in the right corner if you press that using something thin like the stylus while you press the on button
then it hardreset
but there is software which let you do it as well
the upgrade is really pretty simpel
Thanks very much. I know the reset button, I use that every now and again. There's no way I could have pressed it and the on switch by accident given tha the phone was in an otherwise empty jacket pocket.
Oh well, I guess my phone just had enough of life. I'll look into upgrading the ROM when I feel a bit more adventurous
Fabulous...My phone has again decided to reset itself out of the blue.
I have no idea why it does this but it's a pain in the rear. Has anyone seen this before? Does anyone know if there's anything I can do to prevent it? (other than upgrading to the Universal when it comes out!!)
And it's happened again...seems to happen approximately once a month.
Has this spontaneous hard reset issue not happened to anyone else?
I suffered this audacious curse only to find that by removing my 1gig sd card remedied the problem.
I'm wondering if the sd card draws too much power/resources or whether I have a dodgy sd card.
Either way, without it I'm flying. I pop it in when I need to use my TomTom and as it's on charge in the car cradle it doesnt matter about resource usage etc.
So, try removing your sd card and see what goes
SD cards seem to be causing all sorts of problems. I kept getting the eternal spinning timer when copy, paste or deleting files, if the card was inserted. Did a soft reset today to be met with the calibration screen as from a hard reset. Such fun isnt it. :roll:
Hi Guys
Thanks very much for your comments. Unfortunately it isn't the cause as I have had my SD slot empty for a while now (my SD card is in my new car radio/MP3 player )
I'm starting to think that after 15 months my XDA2 has decided that it's had enough of the world. My colleague told me that it's seeking revenge as it's heard me salivate over its younger sister (the Universal).
As you say having the phone hard reset itself is a whole lot of fun!
I have the Sprite Back Up programe so all is not lost - it creates an exe file on the SD card that you locate and select thus restoring everything just how it was before it was lost
one can also just have activesync do an inc backup at each sync
and if the device hardresets one can connect as guest and restore the backup from ones normal profile
The nice thing about the Sprite software is that you can restore when you're out and about unlike the active sync method which means you need your pc close by
I've just took delivery of my Kingston 1GB MicroSD card and all is not going well.
Using TomTom on it causes the entire phone to hang. This can happen is various places, there seems to be no real pattern to it. It can hang when running the initial config screens or if you manage to get passed them it will always hang when trying to enter a street/city name. Normally I can get a few characters in to typing the name and then it will freeze. Only a soft reset will bring it back.
I've tried formatting the card on the PC as FAT and FAT32 but neither seem to improve things.
Anyone else had issues with reading from MicroSD cards hanging their phone - up until installing the card the phones been rock solid?
BTW: It's a SPV M3100. Nothing else is installed - it's just been hard reset
I was having numerous problems with the phone freezing. The famous sleep of death whereby if was left charging overnight it would freeze up only a soft reset will sort it out.
I narrowed it down to the micro sd card or the SPV3100 handling of it. I have a 1gb Sandisk Ultra II. I discovered that if I had a program loaded onto the sd card & the phone had to access it for whatever reason, in my case Fizz Traveller & an RSS reader the phone would just freeze up.
Another problem is everytime I take the sd card out & put it back in, the phone doesn't see it until a soft reset.
Obviously this could be just the phone not compatible with the sd card but I don't have a different brand to try out. But I tend to think its a bug with the phone itself.
hmm doesn't sound too clever.
Assuming it is a bug with the phone itself I wonder if trying one of the other roms might be a course of action? Trouble is there's no way back yet until Orange release a update. Could really do with my GPS working though :-(
zen123 said:
Another problem is everytime I take the sd card out & put it back in, the phone doesn't see it until a soft reset.
Click to expand...
Click to collapse
I think that this is normal for the Hermes. That's the way it works on my Vario II.
I believe the problem with TomTom hanging is due to the software being a little slow at reading the names database from the card. This happens to me on occasion, but if you wait a little while it comes back. I'm using a SanDisk 2Gb card and most other software works fine. It's entirely possible that these problems will be fixed with a future firmware update, as I think it's just a matter of teething problems on a new system. In my case, 2Gb cards weren't even widely available when the Hermes was designed.
kevino said:
zen123 said:
Another problem is everytime I take the sd card out & put it back in, the phone doesn't see it until a soft reset.
Click to expand...
Click to collapse
I've got TTN5 working on my SPV no problems at all. Took less than 10mins to transfer the files from my old sd card to the new one & load the Nav5.21 program onto the phone. Even after numerous hard resets & 3 different phones.
Click to expand...
Click to collapse
Hi!
I really need help right now. This is second time my TyTN goes wild this way.
I can start machine allright and I can put PIN-code in but little bit after TyTN hangs totally. It does not respond to anything.
Even hard reset is difficult to do because you have to be so quick to push buttons before systems freezes.
There is no extreme programs or any changes made after last hard reset.
1. Can I do something now on the road?
2. What have I done wrong that it goes wild like this?
Please help ASAP if there is something to do now without HR.
I dont think the freeze can stop the hard reset ... You should be able to HR even when your TyTN is frozen till the ice ages ...
This is not the....
This is not the main issue. I can Hard Reset... but what went wron in the first place? And twice in one week.
Few decent program installations and using ActiveSync in two machines... I think that is the reason somehow... But how to prevent this happening constantly.
Most likely, one of your programs is screwing it up .. You need to figure out which one it is ... Setup one by one manually and see what happens ..
Also, try installing SPB Pocket Plus .. that has a manual safe startup mode .. see if you are able to start up your TyTN in the safe mode .. instead of doing a hard reset everytime ..
_mike_ said:
Hi!
I really need help right now. This is second time my TyTN goes wild this way.
I can start machine allright and I can put PIN-code in but little bit after TyTN hangs totally. It does not respond to anything.
Even hard reset is difficult to do because you have to be so quick to push buttons before systems freezes.
There is no extreme programs or any changes made after last hard reset.
1. Can I do something now on the road?
2. What have I done wrong that it goes wild like this?
Please help ASAP if there is something to do now without HR.
Click to expand...
Click to collapse
Just another thing to check along with suggestions above. Do you use a storage card. If so does it still hang with the card out. And secondly is there a decent amount of on board memory free.?
Mike
gravejoker said:
Most likely, one of your programs is screwing it up .. You need to figure out which one it is ... Setup one by one manually and see what happens ..
Also, try installing SPB Pocket Plus .. that has a manual safe startup mode .. see if you are able to start up your TyTN in the safe mode .. instead of doing a hard reset everytime ..
Click to expand...
Click to collapse
Had this happen on a Prophet it turns out it was one of the 3rd party software apps installed, the author updated it and no more issues.
I would bet the same thing is happening to you on the TyTn
yer i agree with mark i had same prob with my htc tytn turn out to be a 3rd party bluesnafing tool
What program that...
...might be?
Nothing starts on startup. I mean nothing special that my friend does not have. And he has no problems at all.
My guess still is that problem is ActiveSync. Because in freeze I can see part of ActiveSync window. And ActiveSync starts automatic...
Is there way to prevent ActuveSync on startup?
Thank you for your replys.
_mike_ said:
...might be?
Nothing starts on startup. I mean nothing special that my friend does not have. And he has no problems at all.
My guess still is that problem is ActiveSync. Because in freeze I can see part of ActiveSync window. And ActiveSync starts automatic...
Is there way to prevent ActuveSync on startup?
Thank you for your replys.
Click to expand...
Click to collapse
_mike_ I wouldn't be that dismissive of that advice. Usually, just where you think your sure you have everything covered in a particular area so theres no need to check, thats usually where your problem is.
The fact is that you and your friend have two different phones. Are the model numbers, lot numbers identical? Did you both in stall the exact same software with the exact same version numbers?
I'm guessing that you missed something there.
You need to be patient and thorough when figuring our these issues.
The best advice to find the answer to your problem has already been given.
Start with a base WM5 build and your ext ROM software. Remove your memory card.
Spend at least a day or two in base config. This will certainly tell you if its the phone or the software.
If your phone stays good, add one of your programs to the phone and wait another day.
repeat this until you find out what's causing the issue.
It's not quick or fast, but it's effective.
Good Luck!
l3G3ND said:
_mike_ I wouldn't be that dismissive of that advice. Usually, just where you think your sure you have everything covered in a particular area so theres no need to check, thats usually where your problem is.
....
It's not quick or fast, but it's effective.
Good Luck!
Click to expand...
Click to collapse
I think you are right. I'll do that. Thank you.
_mike_ said:
I think you are right. I'll do that. Thank you.
Click to expand...
Click to collapse
Let us know how you make out.
So what happened with this issue?
Mine has started doing this right after I installed pRSSreader and subscribed to BBc news feed
I took out storage card, soft reset and was quick enough to disable the today screen plugin for the offending app and then uninstall now everything's okay.
Maybe problem was caused by installing pRSSreader to the storage card confused:
Quad said:
So what happened with this issue?
Mine has started doing this right after I installed pRSSreader and subscribed to BBc news feed
I took out storage card, soft reset and was quick enough to disable the today screen plugin for the offending app and then uninstall now everything's okay.
Maybe problem was caused by installing pRSSreader to the storage card confused:
Click to expand...
Click to collapse
There was an issue with pRSSreader 1.3.2 I believe. It happened to me. I was able to disable the today plugin and recover, but it took a few tries. It's supposed to be fixed in the latest version.
Freeze TYTN
I had the same problem after installing Nots Push mail 3 party software.
Each SR make my TYTN freeze.
I have used Memmaid in order to remove it from the startup program
It has solved the problem
Mine hung after installing and uninstalling psShutXp. After uninstalling, I kept getting a notification error message whenever I turned it on concerning psShutXp. Then, it just locked up for good. No amount of soft resets, powering off/on helped. After a hard reset and reinstall of my favorite apps, back to working fine.
I do occassionally lock my phone by accident and I get a little freaked out the next time I use it because nothing works. Then, I realize what I did and that I'm a moron and everything's good again.
URPREY said:
There was an issue with pRSSreader 1.3.2 I believe. It happened to me. I was able to disable the today plugin and recover, but it took a few tries. It's supposed to be fixed in the latest version.
Click to expand...
Click to collapse
Just checked and that was the version I installed.
edit - according to their website 1.3.2 is the lates version
Hi,
I now have the same problem. I have only a view programs installed. Each softreset hangs at the windows mobile screen.
As I don't like a hard reset everytime, my workaround is to enter the bootloader and do a softreset from there...
Is it cleared in between, what is causing the hangs?
good night
dsp
Im getting a similiar problem with mine after not having added ANY new software recently. Mine hangs at the HTC screen, and no matter whether there is:
A) sim card and microSD card
B) microSD card only
C) sim card only
D) neither
in the machine, it still just hangs at the HTC screen on startup (regardless of whether its a soft or hard reset), and doesnt even make the startup tone, or play the animation, all it shows are a few digits and such in red at the beginning. PLEASE HELP!
Mine has it too
I know its a year later, but has anyone found an answer for the Freezing / not booting / not starting of the phone?
One reason is if you have a BS rom installed. You need to install a stock NBS rom (make sure radio is stripped out or you will have to reflash yours) the reflash your BS rom. Make sure you back-up your contacts and messages first.
Cheers...
I have an 8525 that is about a year and a half old running Schap's 4.31 WM6. My device has been unable to come out of standby after a press of the power button with any memory card in (I have tried 3 different ones). The screen remains black and I must soft-reset to use.
Is there a patch/fix for this issue?
BTW this is not a new problem, I have never really been able to use one, just have never gotten around to doing anything about it until now.
ifiweresolucky said:
I have an 8525 that is about a year and a half old running Schap's 4.31 WM6. My device has been unable to come out of standby after a press of the power button with any memory card in (I have tried 3 different ones). The screen remains black and I must soft-reset to use.
Is there a patch/fix for this issue?
BTW this is not a new problem, I have never really been able to use one, just have never gotten around to doing anything about it until now.
Click to expand...
Click to collapse
As an experiment, can you copy the contents off the card to your PC ( for safe-keeping) then format the card and see if it does the same with an empty but formatted card?
If it resumes ok, then I assume that it is something you have on the card (possibly an installed programme) that is attempting to run on resume and conflicting with the resume function.
If it locks up even with a blank card then we need to track down old threads on this - it has been discussed before
Mike