i cant soft and hard reset - 8125, K-JAM, P4300, MDA Vario General

i cant soft and hard reset , i try it and follow the guide in box , the screen is black and black , anyone help me , i use o2 mini s

What are you trying to do?
Soft reset - poke your stylus into the hole that is somewhere on your phone.
Hard reset - search the wiki (I don't have your phone) or use the clear storage application.
VJEschaton will also do the same thing, but you shouldn't need it.
V

Related

White Screen only

I just installed this program, used default settings, apllied, My 8125 soft reset.
Now I cannot see anthing past the initial screen that lists IPL and SPL version.
Just a plain white screen, Active sync wont work, no buttons work. Please help !!!!!!!!!!
If you're stuck I think the only next step would be a hard reset which is going to drop it back to the base factory build so you'll lose anything you've installed etc.
How do I hard reset 8125, with buttons only (key / button combination) OS does not boot or visible.
press the "connetions" button (on the left hand side of the unit next to volume up/down) with the "voice" button (right hand side of the unit opposite the connections button) and then use the stylus to do the normal soft reset and it should hard reset back to factory settings - it's described in the manual
Tried hard reset several times, no luck.
All I did was installed registry wizard from here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
and now I can't get it to do anything, anymore suggestions ?, your help is really appriciated, I have only had the phone to 2 days and its dead already
try holding the same two buttons and then hitting the power button instead of the reset thingy... this method was easier for me... If this dosen't work you will have to enter bootloader mode and reflash the rom.
For the detailed reset procedures try here
By the way, did you use that program to change the default input method?? I use it all the time and the only time it gave me the whitescreen is when I tried to change the default input...Oops. I believe that you should be able to use that program safely, just leave the default input alone... Hope this helps.
Thanks for info, I did manage to reload the ROM. and Yes I did change the default input method, that might have done it. Thanks all, for your Help.
raheelb did you have the warning that the proggie cannot recognize the AKU version?
I had had such a warning, unfortunately bypassed it and had the same issue (white screen) - any one knows why the RegistryWizard cannot recognize AKU version? I have the original Qtek 2.17 ROM installed... :?

Please Help me Qtek s200

I have a qtek S200:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.13.9.26
I have a problem, y qtek starts and goes until the "windows Mobile" Screen and then it stop.....and it stays in that screen for ever.........please help me out, i tried to hard reset and it doesn´t work what should i do?
Help me please!
What was the last thing you did before it stopped working?
Did you install something?
Are you sure you preformed hard reset? You must hold power + camera + comm manager buttons (all on the sides) then press and release the reset hole (at the bottom).
Then you will see a question asking you to confirm hard reset. If I remember correctly you need to press 'send' (the green phone button) to preform hard reset.
Please be sure to read the instruction on he screen.
See the wiki:
http://wiki.xda-developers.com/index.php?pagename=Flash_From_Bootloader
You have a G3 device, so make sure if you use a RUU, you use a G3 specific one.
levenum said:
What was the last thing you did before it stopped working?
Did you install something?
Are you sure you preformed hard reset? You must hold power + camera + comm manager buttons (all on the sides) then press and release the reset hole (at the bottom).
Then you will see a question asking you to confirm hard reset. If I remember correctly you need to press 'send' (the green phone button) to preform hard reset.
Please be sure to read the instruction on he screen.
Click to expand...
Click to collapse
thanks man it works, thank u a lot

Wing Problem

Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?
When you hard reset did you keep holding down the softkeys after you pressed the soft rest button? When done correctly a prompt to soft reset should come up after about 5 seconds
yes, I did
no one got a clue?
Go into bootloader mode and run the TMO RUU.
I was tryin to avoid that. But, I just done it
Thanks

Dopod 818 Pro Problem

Hi guys, I just took over my dad's Dopod that was running under Windows Mobile 5 today.
During which, I installed:
PCCPIMBACKUP (and did a back up)
FIXUNREADCOUNT.exe and ran it.
After that, I resetted the device manually by holding down the power off switch and now my device won't start up again. IT keeps going to the "Dopod Screen" where is later restarts and attempts o switch on again.
IPL 1.00
SPL 1.00.00000
GSM 01.13.20
OS 1.0.13.21
I have not installed any other software except for these and I have attempted to hard reset twice with no avail.
Any help will be greatly appreciated.
are you sure u hard resetted the correct way?
put device on standby, press comm manager & camera button & poke your stylus in the reset hole.
should be hard reset...
wanwarlock said:
are you sure u hard resetted the correct way?
put device on standby, press comm manager & camera button & poke your stylus in the reset hole.
should be hard reset...
Click to expand...
Click to collapse
Yeap, did that. I hard reseted it a few times, tossed it about (literarily) and the just left it alone for the night. The next morning it switched on and hasn't been giving me much issues. Though I just found out the loudspeakers are busted. ):
Did you Check your baterry?
Hello pal...
Today i just hard reset my dopod 818 pro via setting and clear storage.. its done nicely.. until i install ezinput keyboard and after soft reset my device is unbootable...
i try to hard reset my device (press camera and comm manager and poke reset button) but just colurful screen appears (red,green, blue) according to tutorial, the send command will appear... please help me..

Artemis P3300 HELP PLZzzzZzzz

i can't activate bluetooth in my artemis p3300 need help please i have all time this message wen i wont acivate:
error message: problem with bluetooth hardware
sorry for my very bad englich lol & thanks for help ; )
Hello,
Did you try flashing a new ROM... or Hard Reset your device ?
don't know if it's 100% compatible,
I heared that P3300 and P3600 are pretty similar in all but GPS antenna cip..
wish it will help..
http://rapidshare.com/files/107352321/Trinity_WM6_BT_Hot-FIx.zip.html
Try Hard resettiing...
press both soft keys..
on either bottom side of screen..
and while keeep those pressed .. insert stylus into the soft reset hole on left side of the device..
once u hv pushed the soft reset button.. keep softkeys pressed untill u get a screen with mmessage regarding hard reset,,
press the green key..
Thats All
hope that works..
P.S. All ur data would be lost.. so make backup...
Try Hard resettiing...
press both soft keys..
on either bottom side of screen..
and while keeep those pressed .. insert stylus into the soft reset hole on left side of the device..
once u hv pushed the soft reset button.. keep softkeys pressed untill u get a screen with mmessage regarding hard reset,,
press the green key..
Thats All
hope that works..
P.S. All ur data would be lost.. so make backup...

Categories

Resources