Related
I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
Hello all
Can you tell me is your supplied handfree working?
I just installed some mp3's onto a new SD card, while I had the headphones on I thought I would try handsfree, it does not work.
The silver button you press to activate voice dial or answer calls does nothing, and I cannot speak into the microphone, I can only hear calls.
I have voice tabbed my contacts, voice dialing works great on the phone but not the headset. Inside the phone, the phone menu has 'Turn Hands-free On', this is greyed out. Has this feature been removed from the phone?
The phone is Orange SPV M600
Thanks
i find the button on the headset useless. 9 times out of ten it does nothing, then suddently it will end a call or open the voice prompt. I gave up and put it down to a windowsism.
Well, mine can only answer calls, it will not start voice dial and will not open the phone app. No problems with sound or mic.
I use Motorola H350 anyway so it doesn't really bother me.
Thanks
From a lot of Googling I have found nothing official even mentioning the use of the handsfree they advertise and supply. However, it would appear that this phone is only capable of answering and closing calls with handsfree, so not truly handsfree.
You still have to take out your nice new, expensive toy in order to make a call, clearly advertising it to potential muggers. Where I live that is just about everyone you see.
Does seem strange though that cheap old Nokias can do this, but a nice new computerised phone can not. Then again it is Microsoft. I have only had it a week, but already I have found that WM5 is not very backward compatible with software. There are issues with bluetooth headsets (which is why I cancelled an order), and in a week just like old ME, I have lost count of the number Soft Resets that I have had to perform.
I find the most useless feature is the voice dial, you have to open, start, programs, voicedial to make a call or use it. Why not just run the app manually rather than trust voicedial to guess what your after.
Sorry guys but I am not sure what the fuss is about.
I had my phone for a month before getting the BT headset (no problems there by the way) so I assigned the voice speed dial to the comm manager button. Easy and useful and you have the comm manager icon in the today tray so the button is not a major loss.
Now that I have the H350 which is more comfortable than the wired hands-free any way, everything works smoothly but this is with the i-mate ROM. Perhaps your BT troubles are from the Orange ROM?
voice speed used to work.....
I have an H500 headset which used to work splendidly on my Orange M600. The silver button would launch voice dialling and pick up and end calls.
however I upgraded to the Dopod ROm and now it does bugger all! I can hear the calls, but the headset will not launch voice dialling, and all options are greyed out.
Question is, is this feature in the main ROm or the extended part....I have acopy of the Orane extended ROm but can't see anything that looks like the right cab file.
I did not let Dopod customisations run after upgrading, and I really don't want to do a hard reset again!
If anyone knows which file you need to install voice speed dialling I'd be grateful!
Re: voice speed used to work.....
sickboy555 said:
I have an H500 headset which used to work splendidly on my Orange M600. The silver button would launch voice dialling and pick up and end calls.
however I upgraded to the Dopod ROm and now it does bugger all! I can hear the calls, but the headset will not launch voice dialling, and all options are greyed out.
Question is, is this feature in the main ROm or the extended part....I have acopy of the Orane extended ROm but can't see anything that looks like the right cab file.
I did not let Dopod customisations run after upgrading, and I really don't want to do a hard reset again!
If anyone knows which file you need to install voice speed dialling I'd be grateful!
Click to expand...
Click to collapse
The wired headset does not work fully, it can only be used to answer or close calls, it will not initiate voice dialing. I bought a cheap bluetooth headset off of ebay, it paired straight away and initiates voice dialing. I have never been able to get my headet to work, I now just plug it in if I want to play music.
I am not sure about Dopod and Orange ROMs, but in i-mate ROM the speed dial app it self (cyberon voice speed dial) is in the extended ROM while it's settings applet is in ROM.
As for the part that is responsible for answering / ending calls that should be in ROM with any version.
the H500 IS a bluetooth headset- it's a Motorola and wasn't cheap!
It used to work as I say, then I went to the Dopod ROM and now there is no voice speed dialing at all.
I can't seem to find the cyberon cab files anywhere....
sickboy555 said:
the H500 IS a bluetooth headset- it's a Motorola and wasn't cheap!
It used to work as I say, then I went to the Dopod ROM and now there is no voice speed dialing at all.
I can't seem to find the cyberon cab files anywhere....
Click to expand...
Click to collapse
Sorry I read too quickly, I originally started this post before I got bluetooth as I could not get the wired set to work.
Hi
From what I had read in the past when I was having problems with my headset, Cyberon's Voice Speed Dial software is embedded in the OS it does not come as a cutomisation. I have just brought mine up and it simply says Cyberon Voice Speed Dial Setting Version 1.1 Build 51212. Copyright (c) 2005 Cyberon Corporation. There is nothing there related to Orange, and I can not find it in any of the Orange Extended ROM CABS.
I guess Microsoft did a deal with them to install it in the Phone Edition of WM5.
do both version 1.5 and 1.6 work with the atom?
does the registry patch with 1.5 make it work with a bluetooth headset?
does the voice dialer that comes with the atom exec interfere with voice command or do i simply install 1.6?
has anybody here used ms voice command, if so which version and with or without bluetooth and how is the performance?
thanks 4 any info
actually can the build-in voice dialer be made to work with a bluetooth headset, i tried but without luck
HI,
I'm using 1.6 with bluetooth and no problems
so you can voice dial with the bluetooth right?
did you have to do anything with the built-in voice dialer program or just ignore it
Just ignore it.
Microsoft Voice Command works well. It transfer the audio to headset when the headset button is pressed. You can even set it to make announcement to headset.
My only problem is, it speaks too fast & I do not know how to set it.
I'm running MSVC 1.6 on my Atom but the voice dial over BT headset does not work properly.......however 1.6 is much better than 1.5 and I would still recommend it.
Check out this registry edit to SLOW down MS Voice Commander. I set mine to 3 and it is just peeerfect!
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_voice_command_speed
Thanks for the info, angusc.
I should have added that I have tried the Motorola HS700 and also the I-Tech Clip R35.....neither of these seem to work with MSVC but I think it is more to do with the O2 ATOM PDA rather than the BT headsets.
I've done some searches and not found anybody who manages to use MS voice command through a hands free headset.
I've just bought a parrot bluetooth hands free for my car. I'd hoped to be able to use MS voice command for voice dialing. I get the actual phone call through the hands free, but the voice prompts for VC come through the phone and the mic on the phone is used for voice recognition.
I've read people hacking about to get all audio through the hands free, but the hack I've seen disables VC.
Does anyone know if it's possible? Or is there any other software that can be used for voice dialing through the hands free. I'm guessing not if it's htc bad implementation of the bluetooth stack.
Cheers
it is definitely possible - if with BT handsfree you mean bluetooth headsets. With my Jabra BT620s i could use MS voice commander 1.6 and give instructions....it ALMOST works, in the sense that it technically does the job but, at the end, i didn't like it: too sensitive to noise and to....my english....
andrewpmoore said:
I've done some searches and not found anybody who manages to use MS voice command through a hands free headset.
I've just bought a parrot bluetooth hands free for my car. I'd hoped to be able to use MS voice command for voice dialing. I get the actual phone call through the hands free, but the voice prompts for VC come through the phone and the mic on the phone is used for voice recognition.
I've read people hacking about to get all audio through the hands free, but the hack I've seen disables VC.
Does anyone know if it's possible? Or is there any other software that can be used for voice dialing through the hands free. I'm guessing not if it's htc bad implementation of the bluetooth stack.
Cheers
Click to expand...
Click to collapse
I have the same problem - has anyone found a fix?
Incoming calls are fine, also connections that are made after the initial user-to-phone command.
I also have a diamond and this operates just fine ie the MSVC prompt comes through the bluetooth OK.
Thanks
PS yes, I have tried changing HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =vcbthag.dll to BTAGExt.dll
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.