Hello all
Can you tell me is your supplied handfree working?
I just installed some mp3's onto a new SD card, while I had the headphones on I thought I would try handsfree, it does not work.
The silver button you press to activate voice dial or answer calls does nothing, and I cannot speak into the microphone, I can only hear calls.
I have voice tabbed my contacts, voice dialing works great on the phone but not the headset. Inside the phone, the phone menu has 'Turn Hands-free On', this is greyed out. Has this feature been removed from the phone?
The phone is Orange SPV M600
Thanks
i find the button on the headset useless. 9 times out of ten it does nothing, then suddently it will end a call or open the voice prompt. I gave up and put it down to a windowsism.
Well, mine can only answer calls, it will not start voice dial and will not open the phone app. No problems with sound or mic.
I use Motorola H350 anyway so it doesn't really bother me.
Thanks
From a lot of Googling I have found nothing official even mentioning the use of the handsfree they advertise and supply. However, it would appear that this phone is only capable of answering and closing calls with handsfree, so not truly handsfree.
You still have to take out your nice new, expensive toy in order to make a call, clearly advertising it to potential muggers. Where I live that is just about everyone you see.
Does seem strange though that cheap old Nokias can do this, but a nice new computerised phone can not. Then again it is Microsoft. I have only had it a week, but already I have found that WM5 is not very backward compatible with software. There are issues with bluetooth headsets (which is why I cancelled an order), and in a week just like old ME, I have lost count of the number Soft Resets that I have had to perform.
I find the most useless feature is the voice dial, you have to open, start, programs, voicedial to make a call or use it. Why not just run the app manually rather than trust voicedial to guess what your after.
Sorry guys but I am not sure what the fuss is about.
I had my phone for a month before getting the BT headset (no problems there by the way) so I assigned the voice speed dial to the comm manager button. Easy and useful and you have the comm manager icon in the today tray so the button is not a major loss.
Now that I have the H350 which is more comfortable than the wired hands-free any way, everything works smoothly but this is with the i-mate ROM. Perhaps your BT troubles are from the Orange ROM?
voice speed used to work.....
I have an H500 headset which used to work splendidly on my Orange M600. The silver button would launch voice dialling and pick up and end calls.
however I upgraded to the Dopod ROm and now it does bugger all! I can hear the calls, but the headset will not launch voice dialling, and all options are greyed out.
Question is, is this feature in the main ROm or the extended part....I have acopy of the Orane extended ROm but can't see anything that looks like the right cab file.
I did not let Dopod customisations run after upgrading, and I really don't want to do a hard reset again!
If anyone knows which file you need to install voice speed dialling I'd be grateful!
Re: voice speed used to work.....
sickboy555 said:
I have an H500 headset which used to work splendidly on my Orange M600. The silver button would launch voice dialling and pick up and end calls.
however I upgraded to the Dopod ROm and now it does bugger all! I can hear the calls, but the headset will not launch voice dialling, and all options are greyed out.
Question is, is this feature in the main ROm or the extended part....I have acopy of the Orane extended ROm but can't see anything that looks like the right cab file.
I did not let Dopod customisations run after upgrading, and I really don't want to do a hard reset again!
If anyone knows which file you need to install voice speed dialling I'd be grateful!
Click to expand...
Click to collapse
The wired headset does not work fully, it can only be used to answer or close calls, it will not initiate voice dialing. I bought a cheap bluetooth headset off of ebay, it paired straight away and initiates voice dialing. I have never been able to get my headet to work, I now just plug it in if I want to play music.
I am not sure about Dopod and Orange ROMs, but in i-mate ROM the speed dial app it self (cyberon voice speed dial) is in the extended ROM while it's settings applet is in ROM.
As for the part that is responsible for answering / ending calls that should be in ROM with any version.
the H500 IS a bluetooth headset- it's a Motorola and wasn't cheap!
It used to work as I say, then I went to the Dopod ROM and now there is no voice speed dialing at all.
I can't seem to find the cyberon cab files anywhere....
sickboy555 said:
the H500 IS a bluetooth headset- it's a Motorola and wasn't cheap!
It used to work as I say, then I went to the Dopod ROM and now there is no voice speed dialing at all.
I can't seem to find the cyberon cab files anywhere....
Click to expand...
Click to collapse
Sorry I read too quickly, I originally started this post before I got bluetooth as I could not get the wired set to work.
Hi
From what I had read in the past when I was having problems with my headset, Cyberon's Voice Speed Dial software is embedded in the OS it does not come as a cutomisation. I have just brought mine up and it simply says Cyberon Voice Speed Dial Setting Version 1.1 Build 51212. Copyright (c) 2005 Cyberon Corporation. There is nothing there related to Orange, and I can not find it in any of the Orange Extended ROM CABS.
I guess Microsoft did a deal with them to install it in the Phone Edition of WM5.
Related
Does any known how to detect when user press answer button on headset? What event or message generated by system? I find only some event that occurs when user insert headset jack in phone.
The AG service gets a "AT+CKPD=200" message
What i'm interestet in ; How do you send these AT commands ?
I'm sorry, but what is "AG service"?
Audio Gateway.
As far as I remember WM5 has standart API to register AG message handler. WM2003SE and older don't have a standart way.
It's not good. I'm interested in WM2003
Voice Dialing via Bluetooth NOT available on Atom
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Re: Voice Dialing via Bluetooth NOT available on Atom
Camstech said:
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Click to expand...
Click to collapse
Couldn't agree more!
About voice dialer. I thought it was just because Atom needs bluetooth headset button to be pressed for a while to launch dialer. It acts so with wired headset. Unfortunately, i have just one bluetooth headset to play with. And it turns off after 2 sec. holding the button.
On my Dopod 818pro everything acts like a charm (VD runs after a single press), so it isn't a WM5 bug.
can someone enable activating MS Voice Command from a wired headset for WM5?
it would be greatly appreciated.
Thanks,
I have the same problem using a bluetooth headset but if I use the wired headset supplied with my Atom it works fine.
that's good news. so, many OEMs are realizing the importance of this feature. so far, they have it in the Treo 700w and according to you, the Atom.
btw, did you have MS Voice Command pre-installed in your Atom, or did you buy it separately?
thanks,
The talk button on the wired headset is a "fake" button. It generates an special pattern in the recorded audio that it's recognized by the phone application.
It generates an special pattern in the recorded audio that it's recognized by the phone application.
Click to expand...
Click to collapse
Are you sure about that?
I've disembled quite a few headsets and the usual way is to shortcircut the mic-wire with one of the stereo-wires, whitch in return has to be cought by the mainboard and then translated to a command.
I'm not sure, but seems pretty feasible. That button is only used by the phone applicacion, which needs to open the wave input device.
Detecting the button pressing is pretty simple: recording at 16 bits, the average of the absolute value of the samples in complete silence is at least 100, with the talk button pressed, 6 or 7.
I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
I can use the talk button to answer incoming calls on headset. Anybody knows a way to use that button for voice calling etc?
Hello
Just been browsing and I notice you have asked the same question as me, I did not notice it before as I searched for handsfree.
Anyway, what model do you have? I am SPV M600, I only noticed this problem today as I have just installed MP3's onto my SD card. While I had the headphones on I tried handsfree and noticed I could not activate voice dial with the button although I could answer and close calls.
On all of my old phones, I just pressed the button, it activated voice dial and I called the number, but not this phone.
I have set up voice dial on the phone, voice tagged contacts, and it is working great, none are failing to be recognised.
Have you managed to sort out the problem yet?
I called my phone supplier they could not help as they do not have a technical dept, and Orange just wont answer the phone, customer service is dreadful lately.
Dodgy headset ??
I got my SPV M600 today and headset works fine, and the use headset selection under phone settings is greyed out as well
Sorry I replied to the wrong thread. I dont know how to get the voice dial on the headset.
Spenner said:
Dodgy headset ??
I got my SPV M600 today and headset works fine, and the use headset selection under phone settings is greyed out as well
Click to expand...
Click to collapse
Hi Spenner.
When you say your headset works, does it activate the voice dial software when the silver button is pressed or does it just answer and close calls?
Voice Dial
I think it can be solved with a registry modification. Unfortunately I cannot solve the problem myself. I tried all the properities bu I couldnt find any related one.
My phone is O2 XDA and just like you I only can answer and hang up calls by headset button.
i was asking about how to change behaviour of this button, hovewer nobydy knows
I would like to push it 1,2,3 times or push & hold and assign different actions for different pushes
it all used to work beautifully on my Orange M600. Then I upgraded to the Dopod ROm and the voice speed dialler i gone.
Bloody annoying! Can't work out how to get it back...
I know this has been covered a bit but I have a quick question. MS is saying you need to have AKU 3.2 to get VC to announce caller's over your BT Headset. Has anyone found a simple way to make this work on an earlier ROM. Lately I've been running mostly Molski's ROM, but I dabbled in Faria's 3.2. I swore I had BT working totally with a 2.26 ROM, but am I on crack?
I liked Faria's 3.2 but I was missing too many calls. Is there any way to upgrade just teh BT in an older ROM to make this work. (I'm sure my inexperience shows in this question. If its impossible to do, just say the word and I'll patiently wait for a new 3.2 or 3.5 ROM or just forget about this)
I have two answers to your question.
The first is use the A2DP hack found in this forum and get a stereo bluetooth headset. The iTech Clip R35 or S35 both come with the two headphones; one with only one earbud, so you aren't covering both your ears. When you have a stereo bluetooth headset, all sound, including the calls from MS Voice Command are redirected to your headset.
The second is use the program found here:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
It basically redirects all sound to bluetooth (probably a cheaper and easier fix); I haven't tried it yet, but it seems like it might be the solution you are looking for.
I also liked having the feature of calls announced through bluetooth, but it never did seem to work. I have been meaning to download the program from the site, but just haven't gotten chance. If you try it, let me know if it works.
Thanks.
I wonder how hard it would be to get that little program to run automatically when connected to a head set
yeah theres nothign cooler than wearing a stereo headset while driving. Thanks but no thanks.
I've used BT audio with v1.5, and it wasnt for me. i still use it to listen to podcasts via my headset on occasion though.
The nice thing about 1.6 when it was working (mist have been with Faria's ROM) was that I didn't hear my normal phone ringtone through the headset. It rang like normal through my headset, but it would announce the callers name. Its a cool feature.
edit: I must have been wrong. It does divert the ringtone through your headset as well. This gives me hope that I can work somethign out using BTAudio.
Yeah it is a cool feature. You can go to the notification settings in voice command (Settings -> Personal -> Voice Command) and change it so that notifications are done when bluetooth is available (the second radio button). If the notifications cannot sound through your headset, they will come from the phone speaker so you will still be able to hear who is calling without looking at your phone. Doesn't really help if your phone is in your pocket or if you can't hear it, but I guess its the next best alternative.
I have a cooked T-mobile 2.26 ROM and use MS VC 1.6 over my BT205 no problems. I was previously using the original O2 rom and has it working on that too so both an AKU2.0 and an AKU2.3 work fine. To install try this:
remove VC if installed
remove headset pairing
soft reset
create headset pair and leave it switched on
install vc1.6
soft reset
add path string to HKLM\SOFTWARE\OEM\VoiceCommand\
i.e. \Program Files\Voice Command\VoiceCMD.exe
soft reset
then try the button on the headset a few times
Riptos
I'm not having trouble using BT with VC. I want the Incoming call announcements to come over BT.
I installed Farias 3.2 and it worked, but I decided its not a huge deal. I'll try playing around looking at some of teh links here and see if I can't work somethign out. Thanks everyone.
I would also love for voice command 1.6 to announce incoming calls to my bluetooth headset. Interestingly, low battery announcements come through the bluetooth headset, but not incoming calls. Hmmm. Any suggestions/luck getting this to work?
Best,
MJB
VC Caller ID over Bluetooth
I think you all will enjoy this hack
where did u find this hack from? is it reliable?
jacob-mda said:
where did u find this hack from? is it reliable?
Click to expand...
Click to collapse
What? You don't trust someone who's first post is somethign to put on your phone
hell no considering this a brand new mda tmobile just sent me lol..
jacob-mda said:
hell no considering this a brand new mda tmobile just sent me lol..
Click to expand...
Click to collapse
Just wanted to let everyone know I tried it out today and it works as expected. Phone audio gets redirected to BT headset on incoming calls.
but does the ringer get re-directed also? cuz if so thats DAMN ANNOYING!
Well I dont mean to sound condescending to a "senior member" cuz im just a junior but did it cross your mind to select "none" as your ringer? Oh, Btw everyone, your welcome for my fantastic little file
What exactly does the file do???
I had troubles with VC 1.6 at first, but now it seems to work OK. Maybe I accidentally followed Riptos's instructions. Don't know.
Also BTAudio is working to redirect audio when I want that to happen, since VC now closes the audio after it finishes.
The only remaining minor glitch is that after giving a dial command, the little simulated dialing noise comes over the phone speaker not the headphone. So if the phone isn't right by, I don't always know whether it has dialed or not.
Any suggestions?
I tried the CallerID program. It works just as described. The only thing is that is takes up ~443.48 KB at startup. I just installed it so I don't know if it increases after a while.
I have a question. If I understand everything correctly, with a AKU 3.2 ROM this CallerID program isn't necessary if I want to get Incoming Call Announcements over Bluetooth. Right??
Has anyone gotten VC 1.6 to announce incoming calls over a STEREO Bluetooth headset? Seems like the discussions have only been for a hands free device. Anyone?
I don't have a 3.XX ROM and Voice Command notifications work on my stereo bluetooth headset without the program because I think wtih stereo bluetooth, all sound is redirected to the headset. I didn't do anything or change any settings, it just worked. I obviously have the A2DP hack installed, but that's it.
Correct me if I am wrong, but there is no built in voice dialing capability tools included with the HD2?
I would like to be able to (like I have with the last 2 HTC Smartphones) be able to voice dial a contact over a bluetooth headset or car unit....
Any recommendations, or is this feature hidden somewhere that I simply have to activate? If there is an app I can get, preferrably free, please advise. Thanks!
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Thanks, so nothing is included with the HD2 then correct? Is there a free version we can get for our HD2 here or elsewhere of Voice Command?
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
And that's on an HD2?
MSVC is pretty much the best out there...the other alternative is the Cyberon Speed Dial, but you do have to record for each contact.
eskasi said:
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
Which MSVC version are you using?
I've been having strange problems with my Blueant Supertooth light and MSVC 1.6.
The problems are:
- My Blueant doesn't terminate the connection after calls, the lights and speaker just stays on eventhough the call has been terminated.
- No incoming call announcement from the blueant device.
- Sometimes when I press the call button on my BT device, voice commander responds on the phone's speaker??
Weird... I didn't have the above problems with my TD, although I never could get the incoming call announcement to work as well.
on the same lines, is there any application to type what you speak? This way we could use speech to text instead of using the keyboard!
It is a huge letdown that the HD2 does not already INCLUDE a voice dialing application like the past several HTC phones have had, for years.
HTC needs to step up the plate and both provide this and make sure that bluetooth voice dialing protocols are in place.
Has anyone used the Cyberon app yet? I believe the one is called "Voice Dialer" and the other is called "Voice Commander", not sure what the actual difference is or if either work fully on the HD2.
Hi. I'm using Cyberon Voice Sped Dialer on my HD2 and have set up my voice dals.
However, when I go to use the voice dial I only every get the 'tone' through the phone speaker and no longer through my BT headset. I have a Jawbone 2 BT headset.
My Touch HD worked fine with it and you could dial using voice through the headset but I no longer can on the HD2.
Is there a way to fix this? Do I need different software or is it just one of those things?
Thanks.
Owen.
Hi,
Im having the same problems with my HD2 device. I have a parrot bluetooth carkit and with this new device it doens't work like it should because there is no voice dialing.
I've tried several programs like Microsoft Voice command and other voice command programs like VITO voice command and Cyberon.
Is there any program that just looks like the voice dialing on the HTC Diamond? I just want to record my own voice and use it with my bluetooth carkit.
Thanks,
187ed187
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
So what do we do now? I really love this phone but this is a huge problem for me...
Good question.... experiment!? E-mail voice recognition manufactures?
I have cyberon voice speed dial 1.2
I cant get it to work through my BT but I have sort cut on home that I press and it opens all my progs and dial contacts, one of the best things about my phone now I love that it opens all my programs...
I used to have a n95 and this put an auto voice tag on each contact and worked through any BT, shame the HD2 hasnt got an app that can do that ... and open my progs..
I'm also still waiting for a solution.
I have 2 bt handsfree devices on my 2 cars (Parrot and Blueant)...and MSVC only works for the first try after a soft reset.
After the first go, MSVC just goes thru the phone's mic and speaker. Very annoying when you still need to hold the phone up while driving AND you have a bluetooth handsfree device.
optiknerv said:
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
Click to expand...
Click to collapse
Is it possible for someone to cook a ROM with the MSFT bluetooth stack? Or is that too hardware/driver dependent?
You guys should check out the threat with the name: Voice Dial Removed! WTF?
Since I cannot post links yet I can't post the exact link but I'm sure you guys are able to use the search function on this website
Someone claims to have found a working solution for the problem, it's on the second page of the thread.. I'm going to test it right now
Edit: IT WORKS!! At first holding the call button didn't work for me, so I followed the instructions on the first page and now it works!!
Link :
Voice Dial Removed! WTF?
About to try it, hope it works with BT voice dial, if not then Duttys WM6.5 works as well as it can and includes the long press fix as standard.
Owen.
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
wandel said:
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
Click to expand...
Click to collapse
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
TUNCAYCETIN said:
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
Click to expand...
Click to collapse
Can you give us a little more information? Which ROM ver? Which other soft you installed? Did u use: 1_CyberonVoiceSpeedDial_1_2_b080227_0R3.cab ?
Isn't there an option in the BT setup, sending all systemsounds to BT?