Is it possible to set-up the XDA2 to make handsfree, voice-activated 'phone callls from a BT headset? Nearly every mobile I've owned had this and I feel it's vital - I don't use Tomtom or anything like that so the XDA isn't in a ceadle which I can get to.
Microsoft Voice Command
I've just read about this but again doesn't support BT headset usage - I don't think the Fonix Voicedial on the O2 UK site would do that either.
I think I run the program, then my BT can read what I m trying to say to the program.software
well... is there any development on making voice dialling/bt headset work on the himalaya now?
fatboyslimfast said:
Is it possible to set-up the XDA2 to make handsfree, voice-activated 'phone callls from a BT headset? Nearly every mobile I've owned had this and I feel it's vital - I don't use Tomtom or anything like that so the XDA isn't in a ceadle which I can get to.
Click to expand...
Click to collapse
Hi,
Microsoft Voice command works very well for me, even in a moving car. The only problem is you do have to press the hot key to activate it. One the number is dialed, my bluetooth car kit activates.
Mac
I know most people seem to be adding MS voice commander to their TyTn's but I have that much software on my M3100 that I want to use the Cyberon installed software.. It does just what I need, launch progs and voice dialling from my contacts list..
I don't require anything else except......
How do I get my SonyEricsson HBH-300 BT handsfree to actually use it's microphone when trying to make voice commands..
I was wondering why I had been having so much trouble dialling when driving, reading a few other threads it appears ( and now I've tested it) that the mic only works on a call, it uses the M3100's built in mic to receive the voice command, not a lot of use in a noisy vehicle..
Any suggestions please...
If I need to reg hack, what is the best software to use with the M3100. I tried I had for my OLD pda running wince 2003 but it doesn't seem to like WM5
Any help please... Phil
do both version 1.5 and 1.6 work with the atom?
does the registry patch with 1.5 make it work with a bluetooth headset?
does the voice dialer that comes with the atom exec interfere with voice command or do i simply install 1.6?
has anybody here used ms voice command, if so which version and with or without bluetooth and how is the performance?
thanks 4 any info
actually can the build-in voice dialer be made to work with a bluetooth headset, i tried but without luck
HI,
I'm using 1.6 with bluetooth and no problems
so you can voice dial with the bluetooth right?
did you have to do anything with the built-in voice dialer program or just ignore it
Just ignore it.
Microsoft Voice Command works well. It transfer the audio to headset when the headset button is pressed. You can even set it to make announcement to headset.
My only problem is, it speaks too fast & I do not know how to set it.
I'm running MSVC 1.6 on my Atom but the voice dial over BT headset does not work properly.......however 1.6 is much better than 1.5 and I would still recommend it.
Check out this registry edit to SLOW down MS Voice Commander. I set mine to 3 and it is just peeerfect!
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_voice_command_speed
Thanks for the info, angusc.
I should have added that I have tried the Motorola HS700 and also the I-Tech Clip R35.....neither of these seem to work with MSVC but I think it is more to do with the O2 ATOM PDA rather than the BT headsets.
Correct me if I am wrong, but there is no built in voice dialing capability tools included with the HD2?
I would like to be able to (like I have with the last 2 HTC Smartphones) be able to voice dial a contact over a bluetooth headset or car unit....
Any recommendations, or is this feature hidden somewhere that I simply have to activate? If there is an app I can get, preferrably free, please advise. Thanks!
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Thanks, so nothing is included with the HD2 then correct? Is there a free version we can get for our HD2 here or elsewhere of Voice Command?
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
And that's on an HD2?
MSVC is pretty much the best out there...the other alternative is the Cyberon Speed Dial, but you do have to record for each contact.
eskasi said:
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
Which MSVC version are you using?
I've been having strange problems with my Blueant Supertooth light and MSVC 1.6.
The problems are:
- My Blueant doesn't terminate the connection after calls, the lights and speaker just stays on eventhough the call has been terminated.
- No incoming call announcement from the blueant device.
- Sometimes when I press the call button on my BT device, voice commander responds on the phone's speaker??
Weird... I didn't have the above problems with my TD, although I never could get the incoming call announcement to work as well.
on the same lines, is there any application to type what you speak? This way we could use speech to text instead of using the keyboard!
It is a huge letdown that the HD2 does not already INCLUDE a voice dialing application like the past several HTC phones have had, for years.
HTC needs to step up the plate and both provide this and make sure that bluetooth voice dialing protocols are in place.
Has anyone used the Cyberon app yet? I believe the one is called "Voice Dialer" and the other is called "Voice Commander", not sure what the actual difference is or if either work fully on the HD2.
Hi. I'm using Cyberon Voice Sped Dialer on my HD2 and have set up my voice dals.
However, when I go to use the voice dial I only every get the 'tone' through the phone speaker and no longer through my BT headset. I have a Jawbone 2 BT headset.
My Touch HD worked fine with it and you could dial using voice through the headset but I no longer can on the HD2.
Is there a way to fix this? Do I need different software or is it just one of those things?
Thanks.
Owen.
Hi,
Im having the same problems with my HD2 device. I have a parrot bluetooth carkit and with this new device it doens't work like it should because there is no voice dialing.
I've tried several programs like Microsoft Voice command and other voice command programs like VITO voice command and Cyberon.
Is there any program that just looks like the voice dialing on the HTC Diamond? I just want to record my own voice and use it with my bluetooth carkit.
Thanks,
187ed187
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
So what do we do now? I really love this phone but this is a huge problem for me...
Good question.... experiment!? E-mail voice recognition manufactures?
I have cyberon voice speed dial 1.2
I cant get it to work through my BT but I have sort cut on home that I press and it opens all my progs and dial contacts, one of the best things about my phone now I love that it opens all my programs...
I used to have a n95 and this put an auto voice tag on each contact and worked through any BT, shame the HD2 hasnt got an app that can do that ... and open my progs..
I'm also still waiting for a solution.
I have 2 bt handsfree devices on my 2 cars (Parrot and Blueant)...and MSVC only works for the first try after a soft reset.
After the first go, MSVC just goes thru the phone's mic and speaker. Very annoying when you still need to hold the phone up while driving AND you have a bluetooth handsfree device.
optiknerv said:
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
Click to expand...
Click to collapse
Is it possible for someone to cook a ROM with the MSFT bluetooth stack? Or is that too hardware/driver dependent?
You guys should check out the threat with the name: Voice Dial Removed! WTF?
Since I cannot post links yet I can't post the exact link but I'm sure you guys are able to use the search function on this website
Someone claims to have found a working solution for the problem, it's on the second page of the thread.. I'm going to test it right now
Edit: IT WORKS!! At first holding the call button didn't work for me, so I followed the instructions on the first page and now it works!!
Link :
Voice Dial Removed! WTF?
About to try it, hope it works with BT voice dial, if not then Duttys WM6.5 works as well as it can and includes the long press fix as standard.
Owen.
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
wandel said:
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
Click to expand...
Click to collapse
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
TUNCAYCETIN said:
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
Click to expand...
Click to collapse
Can you give us a little more information? Which ROM ver? Which other soft you installed? Did u use: 1_CyberonVoiceSpeedDial_1_2_b080227_0R3.cab ?
Isn't there an option in the BT setup, sending all systemsounds to BT?
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.