Database Users

Panick

Just had a major panick!!! My Xda2 would not power up, at first I thought it was just the battery that had died even though I thought it was ok, until I got home, tried to put it on charge and nothing! just dead.
Anyway, I panicked and tried a hard reset and it worked,( albeit I lost all of my settings and programmes) but at least it came back to life.
Does anyone know what could have happened to cause this to happen? If so please let me know so I can avoid it happening again and losing everything.
Many thanks

This happened to me one time about a month ago. Restoring from my Sprite Backup got it back into shape quite nicely in short order.
I never did discover the cause.

I know, really freaked me out, thought £300 had just gone down the swanny!!!!.
Also to make things worse, although I did a full backup the other day, I cant find it anywhere on my pc!!!!!

XDA1 behaves same when the battery is absolutely empty - doesn't charge and doesn't react at all. But apart from XDA2s, XDA1s don't have backup battery...

Thanks for the reply Bob,
So it looks like you have to keep an eye on the charge then, cos if it completely discharges, then u think thats what might cause the problem??

The same here
I had this problem already several times. I must say until now I was not able to pinpoint the cause. With me it occures once a week and I can say I'm getting fed up with it. Once I had it completly charged and the next day the Qtek was completly shutdown. So only a Hard Reset could bring it back :-(
I think this may be related to a faulty battery, I ordered a new one to see if occures again but the battery is out of stock :-(
Does anyone have another idea what could cause this.

Try searching the forums for "hard reset". There is already some discussion about this.

Had the same problem 2 in 4 days. I was working on excel once, and the second time I went to make a call (can't remember what I was doing before).
Both times it took a hard reset,and when it re-started I checked the battery level - 32% the first time, and 48% the second.
The odd thing is that the screen wasn't completely blank whe it crashed.
The first time I had to return home to load Sprite to restore. Then I set Sprite to backup as .exe, which was a lifesaver for a job I was working on.
The second time I had more time to play with options, but even taking out the battery and doing a soft reset didn't sort it out.
BB

IT SEEMS IMPOSSIBLE TO SWITCH ON MY K-JAM

While i was trying to install a program to my k-jam following the instructions suddendly switched off and never recover. I have tried several times to soft and hard reset it but nothing happened.
Please help.

Try removing the battery, let it sit for a minute or 2, replace the battery, put it on charge for a few mins and then try turning it back on with the charger connected...

SWITCH ON
THAT DIDNT HELP

When all your text comes out in capitals try either pressing your caps-lock button or take the paperweight off of your shift key.
Thanks.

I am having a similar problem. My i-mate K-JAM turned off while browsing the other day and will not turn back on. no leds light up when hooked up to USB charger. Tried the battery idea, but no luck. Any help would be greatly appreciated.

Mmmm... sounds like there may be some hardware problems here maybe... I think your best bet would be to talk directlty to imate and see what they think. Maybe an exchange unit is in order here..

Good News! I actually got the phone to reboot and come back up without a hard reset! I just let it sit on the USB charger overnight and it soft reset and came back. The Bad News :-( It now tells me that my miniSD card is not installed even though it is still in the device. I am searching other posts now to see if there is a solution.

I will answer my own question here. After playing around a bit I figured it out. While the K-JAM was plugged into USB, I took out the miniSD card and re-inserted it back into the device. It is now visible. Whew!

I had a problem with the device not recognizing my card with the right name once. For some reason it renamed my storage card by appending a 2 to its name and created an empty entry with the default name. My advice would be to check this with a file manager. If you see this then delete the folders and remove and reinsert the your card. Hope it helps and back up your card before trying this.
Edit: MOOT POST Glad you got it fixed.

Battery at 0% / howto do full backup? (HELP!!!)

Something rather scary happened to me yesterday. I have the original car charger for my K-JAM and have been using it frquently (for TomTom mostly). Yesterday it blew its fuse, and I replaced the fuse and plugged in my wizard, which then promtly reset. Once I got it back up, it claimed my battery was empty, and even after a full night's charge it still claims my battery is at 0%.
I assumed I'd zapped the battery and got myself a new one. However, to my surprise, once I started it up again with a new battery (after having charged it - the orange led was blinking and it looked like it was recharging) it still reports 0% charge on main battery - both from the internal battery meter and my Resco Today plugin (the backup battery seems fine though)
Resets have not solved my problem, and now I'm considering a hard reset as a last ditch effort. The repair time for the K-JAM in Norway now is over one month (!!!) and I need it for a long drive through Europe in two weeks, and cannot wait for a month to get it fixed. For some, a hard reset is not all that dramatic, but I've spent a LOT of time tweaking my wizard into what it is today, and I'd very, very much like to keep everything. So, to my two questions:
1: Is there any possibility that something is funny in software than can be fixed here?
2: If I have to hard reset, can anyone point me to software or a thread that describes how to preserve all setting, registry tweaks, windows startup/start menu, settings etc. through a hard reset? (i.e. what to back up and how to do it in practice? I've used SPB Backup before, but there has been warnings that it will not work as a restore after a hard reset, can anyone confirm this?
I'm a little desperate here guys, so any help would be greatly appreciated!

One more thing: when the Wizard is in the charger, it does recognize the fact that it is being charged (and thus does not turn itself off), but at the very instant I pull the plug, it dies. Another strange thing is that the little battery icon at the top of the screen indicates a full battery, but if I click it and get to Windows' poer settings screen, it claims the battery is empty.
Does the battery meter read some registry values I can manipulate?

olesk said:
Something rather scary happened to me yesterday. I have the original car charger for my K-JAM and have been using it frquently (for TomTom mostly). Yesterday it blew its fuse, and I replaced the fuse and plugged in my wizard, which then promtly reset. Once I got it back up, it claimed my battery was empty, and even after a full night's charge it still claims my battery is at 0%.
I assumed I'd zapped the battery and got myself a new one. However, to my surprise, once I started it up again with a new battery (after having charged it - the orange led was blinking and it looked like it was recharging) it still reports 0% charge on main battery - both from the internal battery meter and my Resco Today plugin (the backup battery seems fine though)
Resets have not solved my problem, and now I'm considering a hard reset as a last ditch effort. The repair time for the K-JAM in Norway now is over one month (!!!) and I need it for a long drive through Europe in two weeks, and cannot wait for a month to get it fixed. For some, a hard reset is not all that dramatic, but I've spent a LOT of time tweaking my wizard into what it is today, and I'd very, very much like to keep everything. So, to my two questions:
1: Is there any possibility that something is funny in software than can be fixed here?
2: If I have to hard reset, can anyone point me to software or a thread that describes how to preserve all setting, registry tweaks, windows startup/start menu, settings etc. through a hard reset? (i.e. what to back up and how to do it in practice? I've used SPB Backup before, but there has been warnings that it will not work as a restore after a hard reset, can anyone confirm this?
I'm a little desperate here guys, so any help would be greatly appreciated!
Click to expand...
Click to collapse
1. I do not know what can be done with for software for this, but probably your battery has to be calibrated.
2. Sprite backup can do all that. When you run Sprite backup, the default settings for the "backup" button is enough to do retain all your tweaks, data and applications. unfortunately, they stopped shipping trial versions. So you cannot "try before you buy".

Second that, buy Sprite back up program. It is really a good program that is now supporting the upgrading of ROM's which is something that can make your life SO much easier!

Usually if a fuse blows it's not for nothing. It might have fried the charging circuitry in the Wizard by the way...

kilrah said:
Usually if a fuse blows it's not for nothing. It might have fried the charging circuitry in the Wizard by the way...
Click to expand...
Click to collapse
I'm afraid you're probably right on the spot there. I've tried a charging both my batteries, and neither of them seem to get charged, even after a hard reset, so I have now admitted defeat and scheduled a repair, which means no GPS navigation through Europe this summer
I did manage to make a full backup with SPB Backup, but since the device won't stay on long enough for me to restore now, I'll have to wait and see if it works. I'm not doing a upgrade, so it might work flawlessly - only time will tell.
Thanks for the fedback though, it's much appreciated!

Olesk. Were you successful with restore using Spb-Backup? I use Spb-Backup buy had not heard the rumour that it might not restore after a hard re-set. I would be pleased to know how yours worked. Thanks.

synfuel said:
Olesk. Were you successful with restore using Spb-Backup? I use Spb-Backup buy had not heard the rumour that it might not restore after a hard re-set. I would be pleased to know how yours worked. Thanks.
Click to expand...
Click to collapse
I haven't tried yet, as it decides to die from loss of battery power in the process. No idea why it suddenly decides to do this, and I'm not convinced it's SPB's fault, so I'll try again once the Wizard is back from the repair shop. I'll post the results hare and send you a private message as well once I try it, but it might take weeks in the worst case though.

is my MDA Vario2(HTC TyTN) dead?

Hi all,
i have a serious problem with my MDA Vario II (HTC TyTN),
just have this device since 2 weeks, and last week i flashed a rom onto my device, its a nameless windows 6.1 rom...
the flash went perfect, the device worked flawlessly!
the device has been working fine all week, i had it hard reset for like 2 times.
now i did another hard reset, everything seemed to go just fine, battery was 100% device nicely came into the bootloader mode, nicely went resetted, perfectly booted letting me setup the device and calibrate the stylus right after this the device resetted itself and after the windows logo it just went into white screen, i waited this out for like 15 minutes and then i pressed soft reset... this white screen was the last thing i have seen on my screen so far (2 days ago now) the only thing my device does is give me a red led when it is connected to the wall charger or usb and the battery is not in the device
as long as my battery is in the device it does absolutely nothing, no sign of life!! not even a red led!
is there anything i can do about this? or do i need to send it away to t-mobile?
i really hope someone can help me with this one!
cheers ChilleCharlie

ps: normally when i press both the soft keys and the reset it would take me into bootloader mode, this doesnt even work no more!

i have been reading on this forum for 2 days now i just have no idea what this problem could be! can somebody please help me! i think it might be my accupack is that possible for a 2 weeks old phone?
is a herm100/200/300 device capable of booting without a battery in it?
cheers Charlie

ok here comes the test result, i was planning on shipping my phone back to the supplier but instead of this i tested my battery with a electrometer guess what? 0,04 volts are on my lipo pack!! OMG battery sudden death! never had this before in my life! now i know i can fix this battery pack did that before with some years old li ion and some months old lipo's but since i am under warranty i hell yea am gonna make use of it! this pack will be sent back to t-mobile in the meanwhile ill buy my ass a new one so i can use my phone
thanks for everything this website is great even thow i havent had 1 reply yet, thanks to you guys i got wm6.1 and will get it back running now! tytytyty btw i heard something about hardspl beeing more safe? i guess i should flash it onto my device or is that risky to do ?

Sorry, didn't see your post until today. Might not have been able to help anyway.. Glad to hear you sorted that out OK though..
As for Hard SPL, its a must to have on your Hermes before flashing as it will make it possible to recover from a bad flash. Its NOT a guarantee but it is a safety net to help when things can/do go wrong.
Would also suggest using the sd card method for rom flashing as its safer than via pc(Hard SPL takes about 2 secs to upgrade so I do that from the pc BUT you can do this via sd card too).
Welcome and happy flashing...

thank you for that information once i get my device running again it will be the first thing ill install even thow i dont think my problem is rom-related anyway, today my battery has been tested in a different phone, as i thought it was completely dead! also my phone has been tested with another battery... well my phone is completely dead as well! i think it has had a short circuit somewhere inside which would explain why it doesnt do anything with or without battery installed...
i do not know for sure thow.. but thank god i still have my warranty.. althow im not sure about this since my phone wasnt running official firmware.. but i guess that has nothing to do with hardware malfunction now does it? so ill be sending it back to the supplier tommorow damn i cant stand not having this device working
cheers chillecharlie

Hey

Hi guys i wasnt quite sure where to put this thread but finnaly decided this forum was fine. I am sorta a newbie but have been reading loads. I think this website is awesome and i will probably donate!! Anyways i have been having a problem with my phone . It is a T mobile MDA Vario Uk IPL 1.06 and SPL 1.06 and WM5, OS 5.1.70 (if that matters)it died, i went to the tmobile shop they sent it to thier place but it came back unfixed. Anyway to make a long story short i turned out to be the charger but now a week back i have got it up and running again!! But when it freezes as it does everynow and then i have no choice but to take the battery out. When i turn it back on the date and time has gone back to November 2005! It does not do this when i turn it off by holding down the power switch. It also loses some tasks i have made . But wierdly not all the tasks. For example i had 4 tasks i took the battery out , when i restarted it the date went back to 2005 and only 1 task remained!. Is there some other way to put it of that i dont know about when it is frozen? Or am i just doomed to keep changing the date!
Thnak you very much for your replies and your time in advance.

Are you trying to soft reset the phone first? Are you trying to turn the phone all the way off? Removing the battery should be a last resort approach.
Here's the deal...
You can stave off a lot of these kind of memory/freezing problems in the future by loading some kind of RAM indicator (QuickMenu has a built-in one, can manage running programs, and gives you a Windows desktop-style start menu for programs instead of the dumb folder avalanche) to let you know you have too many programs running, and you need to do a soft reset every once in a while, or at least hibernate it periodically (you can do this from QuickMenu), just to jog it clean. It would also be wise for you to load a temporary file cleaner to clear out your temp files every once in a while...you'd be shocked how much crap piles up under the OS when you're not looking.
Lastly, since you might end up really losing some important data, I'd recommend getting DotFred's PIM backup tool and loading it on an SD card in your phone, and configure it to back up your phone regularly (like once a day at 2 am, for example). As long as the phone's left on, it'll do that for you, and if your phone really craps the bed, at least you'll have your contacts, meetings, and other info safe and sound.
Also, in the future, please add the info on your phone to your sig, so you don't have to repeat yourself 8,000 times, and you might want to try more descriptive titles for your topics than "Hey," unless you like being ignored...

Thank you Myrddin Wyllt but what did you mean by hibernating it ? do you mean just pushing the on/off button quickly so the screen goes of? oh yeah and thank you for all the advice on this forum i shal procede to do that now! Thnak you again

Yep i have done that now

upgrade your OS to at least WM6.
When I got my phone it had WM5 on it, and it used to lock up or spontaneously soft reset at least once a day, even though I soft reset it regularly. Since I upgraded to WM6 I no longer have these lockup problems.

thank you i was thinking about upgrading but wasnt sure! About the battery thing i just found out about the little hole on the side. I think this solves the problem . But about upgrading will it make my phone slower or take up precious memory or something? And the big question which one?? Also some apps i would like to have require .net framework 2.0. I tried installing it on my phone on the storage card , i had about 50mb free but it still said there is not enough space and told me to clear up space and start again! will upgrading my rom also solve this problem? Is WM6 just like WM5 what are the differences i am a beit of a newbie here! You might have to treat me like a child on this one!
Also i was wondering out of the 47.4mb internal memory of the MDA Vario how much is used by the system and how much crap have i got on? Also if i use "clear storage" then will it also get rid of programs i have installed on my memory card and i have unlocked my phone. Will it re-lock it and return the old crappy t-mobile themes?? (i have spb moble shell atm)
Thank you in advance!