hi everyone, i have reflashed my mda vario with o2 uk xda mini s latest rom. everything is fine except symbols on keybord . when i use shift key , for exaple s send @ key istead of ! or d sends # key instead of @ . everythins is fine aport from it. any idea how can i fix it?
re Keyboard issue MDA VARIO
If your O2 XDA Mini S, MDA Vario or QTEK 9100 has a QWERTZ keyboard, but is behaving like a QWERTY, use the following information to re-map your keyboard to the appropriate keys.
1. Download the AE Keyboard Mapping Software
2. Connect your XDA Mini S to your computer and create a partnership with your ActiveSync software
3. Unzip the file (aekmap.zip) and run the set up file "AEKMapSetup.exe"
4. Follow the on-screen instructions until prompted to install, then click yes.
5. When prompted about ActiveSync Install Setup Feature, click "OK"
6. When asked to check your mobile device screen to see if additional steps are neccessary, click ok, and proceed to check your XDA Mini S' screen.
7. On the XDA Mini S, when asked if you would like to continue, click yes.
8. The XDA Mini S will then install your software, and open AEKeymapSettings automatically. Click the OK button located on the top right hand corner of the screen, without changing any settings.
9. Then wait 3-5 seconds until the software is sucessfully installed. Press the OK button in the top right hand corner again.
10. On your PC, copy the file "AEKmapGetLayout.aek" from the folder you unzipped in step 3, to the following location on the XDA Mini S: Program Files / AEKMap /
11. On the XDA Mini S, open the following folder: Start Menu / Programs / AEK Map Settings.
12. On the first drop down menu, select "German Wizard QWERTZ" and click "save"
13. Your device will now have a properly mapped keyboard.
Thanks for help but i dont want to change anything by application, i ment if there is any registry setting for it. its because i use o2 rom and tmobile rom has different key mapping but just for **** keys
The "AE Keyboard Mapping" just solves the Problem for the Hardwarekeyboard isn't it. The Software Keyboard still stays a QWERTY, isnt it?
Regkey
If its for the hardware keyboard the keys are:
HKEY_CURRENT_USER\keyboard layout\Preload
HKEY_CURRENT_USER\keyboard layout\Preload\1
For german it should be: e0010409
Other languages see here
http://www.easydesksoftware.com/keyboard.htm
Related
I've seen a bit on this site about converting a UK T-Mobile MDA Compact to newer english versions but not for the German T-Mobile MDA Compact. As a novice to this stuff I have three questions:
1) Is it the same procedure for my German T-Mobile MDA Compact as it is for the UK version?
2) Can anyone please give me the link to the newest download for the files I need? (not sure I have it)
3) this is what I plan to do (see instructions below) - got it from JFRAN at www.modaco.com's website. It seems that I need both the rom and this maupgradeut_noid file... I'm not sure I've found the most recent rom file and I havent seen the file maupgrade file with the exact same name on the ftp site here... I've already asked for a link to the most update file, but can someone confirm these directions look ok?
Thanks.
From Jfran at: http://www.modaco.com/New_JAM_rom_from_iMate-t206571.html
Any of the experts willing to put a step by step guide to installing the 1.11 . i have a T mobile MDA , and it all seems so complicated . I am bricking it that I will end up with a dead device .
Tricky stuff, but can be done.
If you are able to get hold of the imate rom, you will need to extract its files and install the upgrade executable file.... esay isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a promt to reset the device
11. Hope that helps.
German MDA Compact to English with latest JamWWE Rom
Hi There
I have recently undergone this excercise on a new German MDA Compact and after undergoing lots of reading here and trying a few things. I have decided to contribute this back to the community.
Note ensure you have a backup of your original ROM and your contacts and personal data in case of errors etc There are quite a few posts covering this in the forum.
1. Download the zip file at ftp link ftp://xda:[email protected]ers.com/Uploads/Magician/ and select the JamROM_111.132WWE_noID_mod.zip file
2. Download, Unzip and extract to a named folder for instance c:\imate
3. You should end up with about 6 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and ROMUpgradeUt (this is the MAUpgradeUT_Noid file renamed so there is no need to download anything extra):
for info the maupgradeut is the file that runs the upgrade if you were an iMate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the XDA developers site.
5. In ActiveSync, click on file and connection settings and untick the USB connection.(Very Important)
6. Connect the phone to the USB and turn the phone into bootloader mode (Camera & Power and Soft reset)
7. Run RomupgradeUt from c:\imate folder
7. The upgrade wizard will start, go through a few checks and proceed with the upgrade (normally you would eventually come up with the country ID error)
8. The process should then go through 3 stages which should last about 15 - 20 minutes.
9. Lastly do a soft reset and you should see your MDA German compact with a new WWE (WorldWide English) ROM
10. In ActiveSync, click on file and connection settings and tick the USB connection so that you can see the device for ActiveSync. Plug in USB and perform yor sync and start the process of moving your data and programs across.
I do hope this helps!
PS I was think of compiling a short illustrated guide taking a lead from some Spanish posts on this matter, let me know what you think.
Excellent! Thanks so much - now have an english MDA!!! And I like the update better too! Definitely like the new color of the number pad
Had a little problem getting to USB mode when I did a hard boot... had to do it a second time after it was already connected and hold the reset for longer... but otherwise all was perfectly clear.
Thanks again!
I love you people
Oh Man, excellent instructions, excellent file, excellent, excellent. I have a T-mobile MDA compact with a Chinese Version of the Pocket PC. downloaded the Jam ROM, installed it. work like a charm. Thanks for the advice, instruction and files.
Hi,
I just went into ftp://ftp.xda-developers.com/Uploads/Magician/ and it is empty? has it been moved as I would like to follow the proceedure and update my MDA as well.
Many Thanks
The ftp gets re-organised from what I have seen
Goto the ftp site Magician folder, shipped roms folder
Download rom of choice preferably the latest WWE revision, ensure you have the MAUpgradeUT tool this will ignore the country ID error.
And follow the standard install instructions in the previous posts
Have fun
German to English Rom
Many Thanks, but one question I have seen in other strings that the ROM is 250Mg this one is a lot smaller?
German to English for MDA
OK Fantastic, I now found the ROM followed the instructions above and now have a great English device
Thanks to all that helped me....
PLEASE HELP (FAILURE DURING INSTALATION OF NEW ENGLISH ROM)
Please somenone help me!
A try according to your manuals to change rom from german to english and during the instalallation the blue screen on my computer appeared and it restarted.. My MDA has only tvo words on its display: above Usp and bellow v1.02 . It doesnt work... How can I now finish installation, bescause actvS can not connect phone with my computer... It looks like it's dead...please help...
Don't worry, you in bootloader now. Just run the maupgradeut_noid.exe & the upgrade will start. Might be that you need to uncheck the usb connection allowed in Act.Sync. You're Magician is far from dead in surely you can fix it either with a shipped or with the maupgradeut_noid or with sd flash.
So just relax & restart your executable.
Cheers, M
Hello All!
On my QTEK9000 the keyboard shortkey "Fn" + "->" key doesn't load the Connection Manager anymore after I upgraded to v1.30.68 for i-Mate.
Q1: Is these difference between i-Mate and QTEK, and i-Mate JasJar doesn't have the Comm Manager red icon on the "->" key on the physical keyboard?
Q2: Is there any hack to setup this shortcut ?
Sorry, have not found any info so far.
THANK YOU VERY MUCH for your answers, All!
This was a known issue with the Beta ROM. upgrade to .76
Hello
PPC: Blue Angel T-Mobile GER
Rom: Xplode Wm6.00.00.WWE
Radio:1.15.00
Protocol: 1337.45
From this rom i want to upgrade to Wm6.1 from Xplode.
My Upgrade steps:
1. Bootloader
2.The ppc shows "Serial"/"Usb" and "v2.05"
2.2 Kill Active sync
3. starting MaUpgradeUt_noID
4.MaUpgradeUt_noID gives no informations about the current Rom /upgrade rom
5.Next
6. Error 150
What i have to do?
Plx help me
Sry for my bad english!
Thx to all
It must be an OS problem
Try using Windows XP rather than using Vista.
I got the same problem with my XDA IIs,
I tried it in Windows XP and successfully Updated to WM 6.1
i have Windows XP no Vista
Give it a try without killing ActiveSync on PC.
1. Put device in bootloader mode
2. Put device in the cradle
3. Start update program (wait till 100% and do not remove device out the cradle)
4. When update has finished, hard reset the device
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
- If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.(“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES)
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
- If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
- Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup
5. Your upgraded ROM is now running!
Greets Rossi
hi all
i flush my phone but the there is no option for camera driver and when i wanna to use camera got error.any solution !!!
thanx all
hi, forgive for my english.
you don't need any option for your camera.. you have a sp3 (alias typhoon).. you only need to install the appropriate file.cab (HTC.IA.Camera.0.3.megapixel.cab).
copy the file in the device and then launch the installation with a click on the .cab file.
Maybe this can be helpful.
Ciao.
@gianluca_d
i did any things u said but the problem still remain and got errore
maybe:
press Start
all programs
settings
Press 9 - More..
press 7 - Setting
camera: enable
reboot the phone.
Hey guys, I found how to upgrade the HP 6945 in a brazilian website and I tried, IT WORKS! I'll explain how to do so now that I can post URLs
First of all, and which is a bit difficult nowadays, you need to use Windows XP, I saw cases that the people have done the upgrade in a virtual machine, but it didn't worked for me.
Let's go to the specifications of your mobile: your Flash Type MUST BE G4 and your BootLoader MUST BE G.39 , if you don't know you can see that in your mobile "Start/System/HP Asset Viewer"
Let's start,
1. Connect your mobile by ActiveSync (you'll need the 4.1 version as your mobile is WM5) using the cradle/dock/usb (was recommended to do a Hard Reset, but it's optional. To do so press On/Off , Send and Cancel Calls buttons, then use the PEN (Stylus) to press the Reset button under the mobile)
ActiveSync 4.1 - http://www.mediafire.com/?blql91lb1cqfq5z
2. Download and extract the file "SPL vG.39.7z" - http://www.mediafire.com/?o243pua8x7c0j0h
3. In the "SPL vG.39" folder, look for a shortcut named as "Command Prompt" and execute it
4. Now write this line in the command:
pdocwrite spl -n0 -b 0x20000 0 0x80000
5. You'll receive in your mobile a message about a dll (itsutils.dll) Press YES.
6. Now you have to put your mobile in BootLoader mode. Press the two buttons next to the directional + On/Off + Reset (using the Pen[Stylus])
7. Now open the ActiveSync and go to "connection configurations". Deselect the box "Allow USB Connections".
8. Download and extract the file "6915_ENG.7z" - http://www.mediafire.com/?kgwl83e22e2oody
9. Open the folder and execute "Sable_RUU.exe"
10. Press Upgrade and WAIT for a message "Update finished!"
11. Go back to ActiveSync (now you should use the 4.5 Version), go to "connection configurations" and select "Allow USB Connections"
12. Enjoy.
Everything is working, and you now have a new Office Package, including OneNote.
Your calls are better, don't freezing. The only problem is that SMS don't do any sounds when it arrives, but it's just the SMS.
The bluetooth you'll need to go to the Settings/Connections for the first time to work, but it's just once.
I have all the downloable content, if the link don't work, email me.
The original Rom of your iPAQ you can be found at HP's website named as GSM Radio Firmware, if you want, but I don't mind you'll need it.
The original website is in Brazilian-Portuguese, I've just translated for you.
http://www.gsmfans.com.br/index.php?topic=202365.0
That's everything. =)