Hello All!
On my QTEK9000 the keyboard shortkey "Fn" + "->" key doesn't load the Connection Manager anymore after I upgraded to v1.30.68 for i-Mate.
Q1: Is these difference between i-Mate and QTEK, and i-Mate JasJar doesn't have the Comm Manager red icon on the "->" key on the physical keyboard?
Q2: Is there any hack to setup this shortcut ?
Sorry, have not found any info so far.
THANK YOU VERY MUCH for your answers, All!
This was a known issue with the Beta ROM. upgrade to .76
Related
Hello all,
I have upgraded my Qtek 1010 form its original Rom lvl to T-Mobile 4.00.21 Eng,
I had couple of problems with this Upgrade, so I decided to fallback the changes but whenever I run PROGRAMM A I got the following msg in the DOS session:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host.
error getting connectiontype
I don't know where the problem is!!!!
Please help me to move on.
Thanks in advanced.
Best regards,
John. :roll:
Hi ..
if you took the time to read through this forum before upgrading you should have found that by upgrading to either 4.00.16 or 4.00.21 you have no way to change the ROM except using the SD card method.
Thank you for fast response,
Could you please point me to the right document/Procedure to prepair the ROM on SD and boot from there.
...
John
I managed to download the ROM to SD Hardrest the device, but which ACTION key should I press to accepts the Load from SD?
I've pressed "Power button" and got 4 colors screen "Whit, Red, Green, and Blue" with the title WALLABY Bootloader V5.15 and at the bottom GSM OK......
Guys What should I do? Wait.... Reset.....
I've been waitting more than 5 mints and nothing chane!!!!!!!
Please help.
Thanks to you all. :shock:
The "Action" key is activated by pressing the middle of the 4-way joypad switch.
Ohhhhhhh,
No I'm Back to xda-developers.com ROM Image......
Thank you all for your support.
I'm so glade to join such a forum.
Again Thank you all.
:lol:
hi everyone, i have reflashed my mda vario with o2 uk xda mini s latest rom. everything is fine except symbols on keybord . when i use shift key , for exaple s send @ key istead of ! or d sends # key instead of @ . everythins is fine aport from it. any idea how can i fix it?
re Keyboard issue MDA VARIO
If your O2 XDA Mini S, MDA Vario or QTEK 9100 has a QWERTZ keyboard, but is behaving like a QWERTY, use the following information to re-map your keyboard to the appropriate keys.
1. Download the AE Keyboard Mapping Software
2. Connect your XDA Mini S to your computer and create a partnership with your ActiveSync software
3. Unzip the file (aekmap.zip) and run the set up file "AEKMapSetup.exe"
4. Follow the on-screen instructions until prompted to install, then click yes.
5. When prompted about ActiveSync Install Setup Feature, click "OK"
6. When asked to check your mobile device screen to see if additional steps are neccessary, click ok, and proceed to check your XDA Mini S' screen.
7. On the XDA Mini S, when asked if you would like to continue, click yes.
8. The XDA Mini S will then install your software, and open AEKeymapSettings automatically. Click the OK button located on the top right hand corner of the screen, without changing any settings.
9. Then wait 3-5 seconds until the software is sucessfully installed. Press the OK button in the top right hand corner again.
10. On your PC, copy the file "AEKmapGetLayout.aek" from the folder you unzipped in step 3, to the following location on the XDA Mini S: Program Files / AEKMap /
11. On the XDA Mini S, open the following folder: Start Menu / Programs / AEK Map Settings.
12. On the first drop down menu, select "German Wizard QWERTZ" and click "save"
13. Your device will now have a properly mapped keyboard.
Thanks for help but i dont want to change anything by application, i ment if there is any registry setting for it. its because i use o2 rom and tmobile rom has different key mapping but just for **** keys
The "AE Keyboard Mapping" just solves the Problem for the Hardwarekeyboard isn't it. The Software Keyboard still stays a QWERTY, isnt it?
Regkey
If its for the hardware keyboard the keys are:
HKEY_CURRENT_USER\keyboard layout\Preload
HKEY_CURRENT_USER\keyboard layout\Preload\1
For german it should be: e0010409
Other languages see here
http://www.easydesksoftware.com/keyboard.htm
I have softbank x01ht with the followig things:
ROM version 1.23.707.1
ROM date 06.28.06
Radio Version 1.47.00.10
Protocol Version 32.80.7020.20H
I hope you can help me with following questions (i preformed some search and found nothing to help me)
1) How can i use the radio?
2) Why after about a minute connected to pc the phone dissconects? and i need to disconnet the cable and connect again it to phone apperas connected again.
3) How to fix some keyboard issues like "?" is drawn on "F" key but it is really on "E" where is "@" drawn.
4) Am i need to upgrade to windows mobile 6? is it better than WM5 or not?
and how i'm upgradig? i found several threads but did not fully understaded.... all talking abous some SPL... i have no idea what to do.
5) Is it any working version of Touch flo? i found here 00.4 alfa but after install nothing happened , just got a little icon in top of the screen.
6) Is it possible to turn on backlight by touchnig the screen and not by power key, it's a little annoying/
Thank you
Hi all,
Everything was working fine, till i installed a Schap´s 6 button comm manager.cab
The new comm manager was not able to turn wifi on, but i still could do it through connections label or Battery status tray icons.
But i read that ins some cases when wifi doesent unable you can delete from the registry the key WLAN in :[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
So i did it... after that i am no able to turn WIFI/WLAN on
even from where i could (manually in connection label or Battery status)
I installed some comm manager.cabs to recover that key.
So now The WLAN registry key is there again there but
Wlan is not working any more.
I also read about some cases that wifi is ****ed from the rom, but i think is not my case ´cos it was just installing new cabs. and deleting that key.
I hope someone can help.
Thanks a lot
had similar but not exact problem a while ago
i eventually had to perform hard reset
what is your radio rom- anyway?
jahrami said:
had similar but not exact problem a while ago
i eventually had to perform hard reset
what is your radio rom- anyway?
Click to expand...
Click to collapse
Dont know how to check it.... can it be some of this? :
WM6
ipl 3.13.0001
spl 3.13.0000
gsm 02.94.90
os 3.13.0.0
schaps
It is the skin of schaps 6 button comm. that is the problem, try this one and you have no trouble....
http://forum.xda-developers.com/attachment.php?attachmentid=59395&d=1195993666
Hello
PPC: Blue Angel T-Mobile GER
Rom: Xplode Wm6.00.00.WWE
Radio:1.15.00
Protocol: 1337.45
From this rom i want to upgrade to Wm6.1 from Xplode.
My Upgrade steps:
1. Bootloader
2.The ppc shows "Serial"/"Usb" and "v2.05"
2.2 Kill Active sync
3. starting MaUpgradeUt_noID
4.MaUpgradeUt_noID gives no informations about the current Rom /upgrade rom
5.Next
6. Error 150
What i have to do?
Plx help me
Sry for my bad english!
Thx to all
It must be an OS problem
Try using Windows XP rather than using Vista.
I got the same problem with my XDA IIs,
I tried it in Windows XP and successfully Updated to WM 6.1
i have Windows XP no Vista
Give it a try without killing ActiveSync on PC.
1. Put device in bootloader mode
2. Put device in the cradle
3. Start update program (wait till 100% and do not remove device out the cradle)
4. When update has finished, hard reset the device
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
- If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.(“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES)
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
- If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
- Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup
5. Your upgraded ROM is now running!
Greets Rossi