Database Users

Keyboard issue MDA VARIO

hi everyone, i have reflashed my mda vario with o2 uk xda mini s latest rom. everything is fine except symbols on keybord . when i use shift key , for exaple s send @ key istead of ! or d sends # key instead of @ . everythins is fine aport from it. any idea how can i fix it?

re Keyboard issue MDA VARIO
If your O2 XDA Mini S, MDA Vario or QTEK 9100 has a QWERTZ keyboard, but is behaving like a QWERTY, use the following information to re-map your keyboard to the appropriate keys.
1. Download the AE Keyboard Mapping Software
2. Connect your XDA Mini S to your computer and create a partnership with your ActiveSync software
3. Unzip the file (aekmap.zip) and run the set up file "AEKMapSetup.exe"
4. Follow the on-screen instructions until prompted to install, then click yes.
5. When prompted about ActiveSync Install Setup Feature, click "OK"
6. When asked to check your mobile device screen to see if additional steps are neccessary, click ok, and proceed to check your XDA Mini S' screen.
7. On the XDA Mini S, when asked if you would like to continue, click yes.
8. The XDA Mini S will then install your software, and open AEKeymapSettings automatically. Click the OK button located on the top right hand corner of the screen, without changing any settings.
9. Then wait 3-5 seconds until the software is sucessfully installed. Press the OK button in the top right hand corner again.
10. On your PC, copy the file "AEKmapGetLayout.aek" from the folder you unzipped in step 3, to the following location on the XDA Mini S: Program Files / AEKMap /
11. On the XDA Mini S, open the following folder: Start Menu / Programs / AEK Map Settings.
12. On the first drop down menu, select "German Wizard QWERTZ" and click "save"
13. Your device will now have a properly mapped keyboard.

Thanks for help but i dont want to change anything by application, i ment if there is any registry setting for it. its because i use o2 rom and tmobile rom has different key mapping but just for **** keys

The "AE Keyboard Mapping" just solves the Problem for the Hardwarekeyboard isn't it. The Software Keyboard still stays a QWERTY, isnt it?

Regkey
If its for the hardware keyboard the keys are:
HKEY_CURRENT_USER\keyboard layout\Preload
HKEY_CURRENT_USER\keyboard layout\Preload\1
For german it should be: e0010409
Other languages see here
http://www.easydesksoftware.com/keyboard.htm

Plz help! problem with shift running winxp!

Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!

hotdevotchka said:
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
Click to expand...
Click to collapse
Did you turn off the device completely? I would remove it from the power, remove the battery, and give a 10 to 20 secs and put battery back and boot it.
Let me know if you have issues.
To restore it to Vista, if the recovery partition is not swiped, just press Fn+3 at the boot time and once it goes into recovery, and just follow the steps.

didn't work....
I tried removing the battery, nothing happened
When I press Fn + 3, it just goes on and starts Windows XP normally (the xp "half" works allright - it's the comm and snapvue which are dead )
Any other idea? Is there any hope ?

oww, now it's really nasty!
I insisted on pressing the FN+3 , and after one or two questions (if I wanted to continue etc) it said "invalid data on recovery partition" - and now the screen just shows black and there's no winxp anymore - I suppose I should write some commands, as there's a white line blinking....but I don't know how to do it.....Heeeelp!

If XP has been installed in place of Vista, then the recovery partition has been wiped, so FN + 3 will not work for recovering Vista.
The Vista (or XP) side and the snapvue side are two totally different entities, so you can wipe the hard drive and snapvue will still work, as it lives in ROM.
So you have 2 separate problems, you need to re-install an OS, and you need to find out why snapvue is not booting.

I managed to enter the bios ( pressed DEL) and it says that hard drive Toshiba etc is "disabled" - so no wonder it can't boot...
Could I do something to enable it or whatever?
Or should I give up ?

Hi,
Who installed XP for you?
Since you need to now 1 or 2 things about computers to do so, I think that person is the one who can help you and do it the quickest....
Other wise you need to post a message after every step and then wait for one of us to respond.... that would take days if not weeks....
Given your name, I guess you don't live near Enschede, the netherlands do you?
Otherwise You could come by and I could give it a go....
greetz,
Pfeffa-rah

no, I live in France at the moment! But thanks for the offer anyway!
I guess I'll just take the thing to a repair shop or something
As for my name, it's "Clockwork Orange" inspired - I'm a great fan of the movie, although I'm French.
No comments regarding the guy who installed the XP! We must keep this discussion civilised!
Thanks a lot , everybody!

Problems after HardSPL

Hello,
After HardSPL instalation and new ROM instalation i have very strange problems - all hardware buttons (camera, volume, green and red ... etc) stop working, even my qwerty keyboard. Touch screen working perfect.
Also i have problems with Activesync - with XP phone is in guest mode, windows Vista & 7 show just ERROR . On all win verwions i can browse phone but it's read-only.
And last problem - i can't install anything via SD - it's give me unsuccessfull instalation on every cab
Worst is that i cant make Hard Reset - camera button do not work.
Please help ...
Thanks in advance.
===== Курви върнете ми парите !!! =====

That's never happened. Which ROM did you install?

[Q] i need wm 6.5 os

hi
my name is shekhar
please get me wm 6.5 to my htc diamond
i want to upgrade from wm6.1 to wm 6.5
please

How to Install or Update your Windows Mobile?
Please Follow Below Orders :
Please Follow Below Orders :
1. you need a PC
2-1. If you have Windows XP -> Setup ActiveSync 4.5 from Here
2-2. If you have Windows Vista or 7 -> Setup Windows Mobile Device Center from Here
3.If you use manufactured ROM(Orginal WM6.1 ROM OR Official ROM) -> Install Touch_Diamond_-HardSPL_OILNEX From Here
How To Install HardSPL on Touch Diamond?
-> After Downloading and Extracting this file
you Must connect your Touch Diamond to your PC with its Cable
Let your PC Connect to your PPC with ActiveSync or Windows Mobile Device Center
Find HardSPL Folder and Run ROMUpdateUtility.exe
At Appeared Windows Page By ROMUpdateUtility.exe Accept Check Box and Click Next Button
Warning : Don't Unplug in Touch Diamond's Cable , Diamond's Battery Must be Charged More than 50%
Then you can see this Message on your PC->"verify the information on your PDAphone...Please wait"
After That you can see Setup Page on your PPC with 4 colors and on the White Color Part ,you can see USB (Notice : You can See Setup Page with Holding Sound Decreasing Button and Pressing Restart Button togather and Release Sound Decreasing Button Until Appearing That Screen)
Clicking Update Button And Next Button After That
And in Finally you can See Two Process Bars are Processing in the Same Time One of them on your PC and Another on your PPC and Restart your Device automatically.
I congratulate, your Touch Diamond Has Been Unlocked now you can install any ROMS That you Want
4. Downloading WINDOW MOBILE 6.5 WITH HTC SENSE 2.5 from Here ( you can See its Pic Here)And Extract this file
5. you Have this folder With two Files CustomRUU.exe And a File With NBH suffix , IF this Folder Dosn't have CustomRUU.exe Download it from Here And Put it to this Folder
5. Run CustomRUU.exe -> Keep Clicking Check Box Button and Next Button until Appearing That Message Again : "verify the information on your PDAphone...Please wait"
6. Clicking Update Button And Next Button After That
7. you can see again Two Process Bars are Processing at the Same Time On your PC and PPC
8. After Finishing ->your PPC Restarts Automatically Again And you Have WM6.5+HTC SENSE 2.5 ON YOUR TOUCH DIAMOND
9. Enjoy. (This ROM Has Been Made And Cooked by donsalari So Much Fast and Stable and Also Really Nice)

Hi guyz!
I have heard it said some of the ROM updates cause some technical failure...like GPS failure or G-sensor....
I wanna ask someone, who have tried this ROM if its ok and will not make any defection!
Thanks in advance!

workes great

SOS

Hi again!! iam back with more problems.I have a htc p3600 WITHOUT A ROM and i try to install the windows mobile 6.5.When i try, the installation stack on 1% and then my phone close.CAN SOMEONE HELP ME? DID MY PHONE BROKE? PLEASE HELP!!!!!!!!

dimitris-samos said:
Hi again!! iam back with more problems.I have a htc p3600 WITHOUT A ROM and i try to install the windows mobile 6.5.When i try, the installation stack on 1% and then my phone close.CAN SOMEONE HELP ME? DID MY PHONE BROKE? PLEASE HELP!!!!!!!!
Click to expand...
Click to collapse
Have you solved it?

yes i solved it! First of all you need a pc with windows xp.Second enter your phone on tri color screen and then in your computer hit ctrl alt delete and in the second tab find wcescomm.exe and rapimgr and stop them! Search http://forum.xda-developers.com/showthread.php?t=308691 for a program called splxploit nad run unbrick! At the wait to finish its progress and install you rom!

dimitris-samos said:
yes i solved it! First of all you need a pc with windows xp.Second enter your phone on tri color screen and then in your computer hit ctrl alt delete and in the second tab find wcescomm.exe and rapimgr and stop them! Download http://forum.xda-developers.com/attachment.php?attachmentid=43539&d=1184192788 a program called splxploit and run unbrick! At the end wait to finish its progress and then try to install your rom!
Click to expand...
Click to collapse