Problems after HardSPL - Wing, P4350 General

Hello,
After HardSPL instalation and new ROM instalation i have very strange problems - all hardware buttons (camera, volume, green and red ... etc) stop working, even my qwerty keyboard. Touch screen working perfect.
Also i have problems with Activesync - with XP phone is in guest mode, windows Vista & 7 show just ERROR . On all win verwions i can browse phone but it's read-only.
And last problem - i can't install anything via SD - it's give me unsuccessfull instalation on every cab
Worst is that i cant make Hard Reset - camera button do not work.
Please help ...
Thanks in advance.
===== Курви върнете ми парите !!! =====

That's never happened. Which ROM did you install?

Related

Big problema, cannot update...help

hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!

HELP

Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael

Plz help! problem with shift running winxp!

Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
hotdevotchka said:
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
Click to expand...
Click to collapse
Did you turn off the device completely? I would remove it from the power, remove the battery, and give a 10 to 20 secs and put battery back and boot it.
Let me know if you have issues.
To restore it to Vista, if the recovery partition is not swiped, just press Fn+3 at the boot time and once it goes into recovery, and just follow the steps.
didn't work....
I tried removing the battery, nothing happened
When I press Fn + 3, it just goes on and starts Windows XP normally (the xp "half" works allright - it's the comm and snapvue which are dead )
Any other idea? Is there any hope ?
oww, now it's really nasty!
I insisted on pressing the FN+3 , and after one or two questions (if I wanted to continue etc) it said "invalid data on recovery partition" - and now the screen just shows black and there's no winxp anymore - I suppose I should write some commands, as there's a white line blinking....but I don't know how to do it.....Heeeelp!
If XP has been installed in place of Vista, then the recovery partition has been wiped, so FN + 3 will not work for recovering Vista.
The Vista (or XP) side and the snapvue side are two totally different entities, so you can wipe the hard drive and snapvue will still work, as it lives in ROM.
So you have 2 separate problems, you need to re-install an OS, and you need to find out why snapvue is not booting.
I managed to enter the bios ( pressed DEL) and it says that hard drive Toshiba etc is "disabled" - so no wonder it can't boot...
Could I do something to enable it or whatever?
Or should I give up ?
Hi,
Who installed XP for you?
Since you need to now 1 or 2 things about computers to do so, I think that person is the one who can help you and do it the quickest....
Other wise you need to post a message after every step and then wait for one of us to respond.... that would take days if not weeks....
Given your name, I guess you don't live near Enschede, the netherlands do you?
Otherwise You could come by and I could give it a go....
greetz,
Pfeffa-rah
no, I live in France at the moment! But thanks for the offer anyway!
I guess I'll just take the thing to a repair shop or something
As for my name, it's "Clockwork Orange" inspired - I'm a great fan of the movie, although I'm French.
No comments regarding the guy who installed the XP! We must keep this discussion civilised!
Thanks a lot , everybody!

Symantec pcAnywhere mobile on HD

Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums

Should like to Flash ROM, but ERROR 260

Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)
run artemis uspl first
remove any sd card if u have
and then try it
Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.
Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP
You need RUU for vista
Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(
I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097
Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much

Categories

Resources