Related
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael
so here we proudly present the HardSPL flash package
well, what this is good for - this enables flashing of custom roms (I try to explain only because I know many Shift owners here don't own other HTC devices).
SSPL and RUU patches have been made mostly by me, HSPL and package compilation have been made mostly by Olipro, so both are branded OliNex.
Please read and follow all instructions very carefully.
this has been tested (thanks thaihugo, et al.), but if you have problems then do let us know in this thread.
also, TO EVERYONE WHO BETA TESTED in the past: please do download this final version. it will flash an updated HardSPL to your device.
prerequisite: "liberated" Shift (i.e. has the usbtool on Snapvue side!).
[size=+1]STEP BY STEP INSTRUCTIONS:[/size]
1. Download the package from attachment in this post and extract the files from the zip somewhere on Vista.
2. Install the EnableRapi.cab file from the zip on Snapvue side. (of course do unzip in Vista first.)
3. Make sure Shift is on AC adapter and that the WMDC in Vista sees the Snapvue side!!! (use usbtool to turn USB on in Snapvue if necessary.)
4. Run the ShiftHardSPLFinal.exe on Vista. if you do not have UAC disabled, then please run it as Administrator!!!
5. It should pop up two cmd windows for a second. then it will pop up a box saying "Processing". at this point please check if Snapvue side went into black screen. if yes, then everything is OK so far, so press OK in the "Processing" messagebox.
6. After some more wait (and two more cmd windows - please allow them to run if Vista asks!), the Romupdateutility will launch automatically. Please press Next and so on, until it flashes the update.
7. The RUU should say success, and should hard reset the device. at this point your Shift has been HardSPL'ed - Congratulations!!!
TroubleShooting:
- if Vista errors out on pput.exe after step 4, make sure you launched the ShiftHardSPLFinal.exe as Administrator: right click on EXE and select "run as Administrator" option.
- if at step 5, you don't have black screen, the device might be asking you to allow to run a program on the Snapvue side. click Yes if prompted!
- if after step 5 the next cmd gets stuck at some USB disabling message, let us know. (it shouldn't get stuck but just in case.)
- if you wish to check it is really HardSPL'd now, use mtty and use info 2 command in it. it should return HTCS00000000something which means it is (fake) supercid and is HardSPL.
NOTE: never use the RUU from this SSPL package for anything else! this is special and is strictly for the HardSPL process.
to just flash ROMs after you installed HardSPL, you can use the original RUU or CustomRUU from this thread: http://forum.xda-developers.com/showthread.php?p=2098895#post2098895
also, first Custom ROM with GPS and with some tweaks/customizations (will also be liberated out of the box!) is to follow sometime this week. along with a radio Security/CID unlocker (patched radio image). then voice and maybe WVGA screen is to follow not much later.
you of course must have this HardSPL installed, or the ROMs will not flash!
enjoy
Let me be the first to say on behalf of us here:
THANK YOU!!!!!!!!!!!!!!!!
ALL HAIL CMONEX!!!!!!!!!!!!!!!!!!
Thanks you and all others in Shift Project
Wouhou !
Thanks !!! great news
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Thanks Guys, appreciated!
after done this thing, is it possible to make voice call from Shift? sorry about that question, as I dont have much knowleague about rom and flash
noup. this will allow you to place the hacked rom (the hacked rom is still to be released) that would enable these features... and this without having the phone detect the "hack".
this is a way of telling it..
szjohnwong said:
I have a Traditional Chinese Version of shift. I followed the instruction to install EnableRapi.cab in WM6 side, then run shiftHardSPLFinal.exe, screen blanked.
On the Vista a CMD pop up said: "USB\ROOT_HUB\4&188A10ED&0 isabled."
then won't continue.
Any help, please?
Click to expand...
Click to collapse
oh, chinese shift... is the OS in all chinese? and the WM side?
anyway, that should not be a problem... if it still won't go on, press Ctrl+C to cancel this cmd, another will pop up, cancel that too, then the RUU will pop up. at this point, put vista to hibernate (don't try to shut down for now, it will make it harder to get it working that way). wait a few secs after it hibernated, wake up vista, then go on with the RUU.
btw if this is first time being in bootloader, it might first want to install drivers at this point. let it install them, then feel free to continue in the RUU.
another way to deal with the issue: shut down vista and remove battery. reinstall battery, boot both vista and snapvue, then start the process from step 1 again. battery removal and fresh boot of vista afterwards can help a lot with usb.
lucid said:
Nice !! Can't wait to use the built-in GPS on the SnapVue side..
Finally I can run PocketReperion so I can find my shift back if it's stolen.
....voice...to follow later....serious... Cmonex, if you had to put a percentage of chance that we will get Voice working, what would the percentage be ?? 50%-50% ?
Click to expand...
Click to collapse
hey
IIRC you have the beta hardSPL flashed, yes? I recommend updating it with this final one (only difference is this has overwrite protection while the beta did not - because of that, you can also update the beta one by using CustomRUU and the RUU_Signed.NBH from the final package after it extracts.)
as for voice, chances are a bit better I think.
congratulations Guys Congratulations Its The Only I Had To Say...
I Need Help....
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Many thanks...
dimisxxx said:
Hello my friends i did the hardspl and everything went well but my question is that why the wm6 became again like before i mean is not liberated again do i have to liberated from the begining again??? because now i cant connect to vista like before with the usb tool....so please tell me.......
Click to expand...
Click to collapse
yes it performs a hard reset.
don't despair, soon you can flash liberated rom and then you can forget about how to do manual liberation
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
tece said:
Hello and thanks for SSPL & HardSPL!!
I'm wondering how to build these custom ROMs..?
Are you dumping the ROM from TytnII/Kaiser and edit until the ROM is small enough? Is any Software out there to edit the Filesystem from dumped ROMs?
Many weeks ago i've heard about a ROM that supports GPS - why didn't you release it with the bundle? Any Bugs?
Click to expand...
Click to collapse
no, not using a kaiser ROM. but you can dump the ROM from Shift in the same way as Kaiser, I think pof also posted about this before. also we have some HTC rom updates, will try to upload them to crapidshare or something soon.
the current rom base with the GPS has an issue so we are porting the GPS to a newer rom base then release that.
as for rom editor tools, a kaiser kitchen with the rom base changed to a shift rom, will work. i.e. the rom tools from kaiser kitchen are compatible.
Shift display has gone blank
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Wow, good work!
Are there already any custom Shift ROMs out there..?
feyisetan said:
Hi help is needed here, I followed installation instruction and obtained USB\ROOT_HUB\4&188A10ED&0 disabled. I've now got shift working, will try again. Thanks.
Click to expand...
Click to collapse
try after removing battery, and with freshly booted vista and snapvue.
make sure the WMDC is running with USB enabled in it. that seems to help.
if nothing else helps, then when you get to that disabled message, and it doesn't move after maybe 2 minutes, Ctrl+C, etc., then hibernate vista etc. (as described above).
EDIT: ah I see you added: problem solved. what was the exact way to solve it?
I recently brought HTC Shift X9500 mobile computer. I have a problem with SnapVUE application. Once I press SnapVUE button it goes to windows mobile however it not display SnapVUE window. It just only display windows mobile task bar and start menu.
I think SnapVUE application is not installed WM side is it possible to install SnapVUE application on WM?
you need to install it
Chanaka said:
I recently brought HTC Shift X9500 mobile computer. I have a problem with SnapVUE application. Once I press SnapVUE button it goes to windows mobile however it not display SnapVUE window. It just only display windows mobile task bar and start menu.
I think SnapVUE application is not installed WM side is it possible to install SnapVUE application on WM?
Click to expand...
Click to collapse
its available as a cab file
Make sure it is enabled.
Start->Settings->Today->Items
adamo86 said:
its available as a cab file
Click to expand...
Click to collapse
Could you please send me the the cab file location? I have searched windows mobile file system but it is not available. Is it possible to download? Do you have download link?
Not available on today items
JaWe said:
Make sure it is enabled.
Start->Settings->Today->Items
Click to expand...
Click to collapse
It is not available on today items
Items available on today items are
Date, Windows Live and Windows Live Search
i have it as a cab file
Chanaka said:
Could you please send me the the cab file location? I have searched windows mobile file system but it is not available. Is it possible to download? Do you have download link?
Click to expand...
Click to collapse
i have the file on my shift i will need your email add i send it to u
adamo86 said:
i have the file on my shift i will need your email add i send it to u
Click to expand...
Click to collapse
could you send me it to [email protected]?
Many Thanks
Snapvue black screen
Hi, I am newcommer in Htc x9000, and I do hard reset to unlocked it, but now my snapvue become dark/black screen.
Any body can help me?
Thanks.
Follow this link, it helped me
http://www.pocketables.net/2008/05/how-to-hard-res.html
Dead snapvue, need help
Thanks for your inform, but I already did hard reset (ecshift -bl, mtty_0513_test and task 28), but the snapvue screen still blank/dead.
Any another way?
Thanks
hi there, adamo86.. can you please send me too the cab file for the htc shift i do have the same problem..here's my email: MOD EDIT: REMOVED EMAIL thank you very much..
please help
adamo86 said:
i have the file on my shift i will need your email add i send it to u
Click to expand...
Click to collapse
can you please send me the cab file or link my htc shift have black colour on snapvue side
please help
sancharhari said:
can you please send me the cab file or link my htc shift have black colour on snapvue side
please help
Click to expand...
Click to collapse
Which file is it that you want I have to check if I still have it.
Sent from my C6903 using Tapatalk
help me
adamo86 said:
Which file is it that you want I have to check if I still have it.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
hi thanks for your reply,
I am having htc shift clio200 (x9000) cdma whatever is the model. I was trying to program it for my cdma network. I done almost everything and program it. I didn't find the hard spl for cdma device and rom for cdma shift. after some research I find somewhere that if I will make clear storage then I can get flash any shift rom which is not having radio image. so I clear the storage.
after that snapvue side gose black
I have done the process below
by doing f3 hardreset my shift installed fresh windows vista
shiftec.exe -bl
then task 28 with mtty
all sucsuss but still nothing
its still black. I can still go to bootloader mode
please help me how can I get my snapvue works
please help
I'm not sure how you get snapvue back. However I have these two files
The first file is to liberate shift
The second is the shift*pack
Sent from my C6903 using Tapatalk
Did you go to ShagCtrlCenter and try to reset SnapVue in advanced settings?
If you haven't already liberated your Shift i don't know how to reflash WiMo Side.
If you can set it to bootloader mode it would be worth trying to do so.
Did you also hardspl and all this stuff?
Files can be found here:
http://forum.xda-developers.com/showthread.php?t=1928501
(If this answer in any way may have been useful to you, don't hesitate to press "Thanks"button )
Hello all,
I have a HTC Touch HD...
My usb is not working.
Is there someone with the same problemm? or do you know how to solve this?
I can charge the phone,, that works....
Please help me.. i want to upgrade but dont know how.
Thx
Alex
I have the same problem too, so now I just sync with bluetooth.. I havent figured out what it is.. it use to work and all of sudden it doesnt.
knobbea said:
Hello all,
I have a HTC Touch HD...
My usb is not working.
Is there someone with the same problemm? or do you know how to solve this?
I can charge the phone,, that works....
Please help me.. i want to upgrade but dont know how.
Thx
Alex
Click to expand...
Click to collapse
What version of windows are you using on your PC? If you are using Windows Mobile Device Center (on Vista or Win7), make sure that in the settings, you still have a check mark on "allow usb connections".
And what if you connect the phone as an external drive? Does windows recognize it?
Chris Cross said:
What version of windows are you using on your PC? If you are using Windows Mobile Device Center (on Vista or Win7), make sure that in the settings, you still have a check mark on "allow usb connections".
And what if you connect the phone as an external drive? Does windows recognize it?
Click to expand...
Click to collapse
I have Windows 7, but i also had a HTC Touch pro2 before and that went good.
No succes when i manualy set the phone to harddrive...
I don't even get a popup screen on the phone to select a option...
Can someone please help me to tel me howto upgrade my phone with an other rom version.
I think i have to do a hspl too!!
Thanks all.
If you are not getting the option to choose how the phone should connect, have you checked the settings "usb to pc"? Maybe it is set to "not ask" when the phone is connected. I would check that before flashing a new rom.
I use Dutty's Holy Grail R2 ROM (it's an HD2 style rom for the HD) and I am happy with it. I also installed Cookie Monster's Home Tab which in my opinion is a "must have" as it improves the use of the home tab tremendously.
To install a new ROM, you don't have to use hspl if you don't want. I have always used uspl (newest version is uspl 2.5). You will need to install the old XP drivers on Win7 in order for it to work.
You can find information in the following links:
Using uspl
Tutorial on upgrading to 1.56 ROMs (very important; there you will also find video tutorials that will help you; info is for hspl or uspl)
HTC Drivers for XP - needed if you are flashing using Vista or Win7 (see post 1 and 3)
Dutty's Holy Grail R2 ROM (it's the one I use)
Other ROMs to choose from (HTCpedia.com) or see also ROM development section at XDA
Cookie Monster's Home Tab (great improvement to the home tab. You also need the CHT editor to fully customize things)
I hope that helps.
thx
Yes i changed that setting.. but the same result.
How do i install that uspl with only a memmory card option??
Thx
Hmm, I have never flashed via memory card. I think for that you do have to use hspl. But I am not sure, so maybe someone else can answer that.
Dutty's post in htcpedia.com says:
*Flashing Guide
SAFEST WAY TO FLASH YOUR ROM IS THROUGH STORAGE CARD METHOD:
* Copy BLACIMG.NBH into the root dir of your Storage Card.
* Be sure to have at least 30% of charge.
* Turn off your device by using the Power Button.
* Go to Boot loader mode. Push and hold Vol. Down + press Power button.
* After that your device will have a white screen with text " Press the power button to continue upgrade or Press Volume down button to cancel upgrade".
But, like I said, if you are only using a memory card, I think you have to have first installed hspl on your phone. ???
I am gonna use HD2_Updatable_XBmod_Yuki_v2_native rom but before it could anyone can tell me if this rom can install the soft after it is flashed?I mean if I want to install any soft should I do any other step?And can this rom charging when the sreen is off?
They say you should be able to sideloade XAP files with TOM's XAP explorer.
You should be able to get marked working to, so can't see why you shouldn't be able to install your software.
Yes the phone charges when the screen is of.
tks
thanks for your answer.I will install the TOM XAP first.
norphf said:
They say you should be able to sideloade XAP files with TOM's XAP explorer.
You should be able to get marked working to, so can't see why you shouldn't be able to install your software.
Yes the phone charges when the screen is of.
Click to expand...
Click to collapse
i guess he more likely meant !!
"can the phone be charged if the phone is off"
the answer as of now is NO !!
because MAGLDR doesnt allow this...hopefully we will have a magldr version soon which fixes this problem !
tks
backlashsid said:
i guess he more likely meant !!
"can the phone be charged if the phone is off"
the answer as of now is NO !!
because MAGLDR doesnt allow this...hopefully we will have a magldr version soon which fixes this problem !
Click to expand...
Click to collapse
Thanks for your answer.yeah,I am waiting for the magldr version.If you do fix this problem.PLS share me the rom.
Sync Issues
Im using the HD2_Updatable_XBmod_Yuki_v2_native, after I connect my HD2 to my computer Zune will only sync it as Guest, Ive tried re-syncing but it wont change sync relations. Any helpful tips?
Tellecast said:
Im using the HD2_Updatable_XBmod_Yuki_v2_native, after I connect my HD2 to my computer Zune will only sync it as Guest, Ive tried re-syncing but it wont change sync relations. Any helpful tips?
Click to expand...
Click to collapse
Have you tried in Zune settings/phone/sync options and look under device options, there should be a third option.