I've seen a bit on this site about converting a UK T-Mobile MDA Compact to newer english versions but not for the German T-Mobile MDA Compact. As a novice to this stuff I have three questions:
1) Is it the same procedure for my German T-Mobile MDA Compact as it is for the UK version?
2) Can anyone please give me the link to the newest download for the files I need? (not sure I have it)
3) this is what I plan to do (see instructions below) - got it from JFRAN at www.modaco.com's website. It seems that I need both the rom and this maupgradeut_noid file... I'm not sure I've found the most recent rom file and I havent seen the file maupgrade file with the exact same name on the ftp site here... I've already asked for a link to the most update file, but can someone confirm these directions look ok?
Thanks.
From Jfran at: http://www.modaco.com/New_JAM_rom_from_iMate-t206571.html
Any of the experts willing to put a step by step guide to installing the 1.11 . i have a T mobile MDA , and it all seems so complicated . I am bricking it that I will end up with a dead device .
Tricky stuff, but can be done.
If you are able to get hold of the imate rom, you will need to extract its files and install the upgrade executable file.... esay isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a promt to reset the device
11. Hope that helps.
German MDA Compact to English with latest JamWWE Rom
Hi There
I have recently undergone this excercise on a new German MDA Compact and after undergoing lots of reading here and trying a few things. I have decided to contribute this back to the community.
Note ensure you have a backup of your original ROM and your contacts and personal data in case of errors etc There are quite a few posts covering this in the forum.
1. Download the zip file at ftp link ftp://xda:[email protected]ers.com/Uploads/Magician/ and select the JamROM_111.132WWE_noID_mod.zip file
2. Download, Unzip and extract to a named folder for instance c:\imate
3. You should end up with about 6 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and ROMUpgradeUt (this is the MAUpgradeUT_Noid file renamed so there is no need to download anything extra):
for info the maupgradeut is the file that runs the upgrade if you were an iMate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the XDA developers site.
5. In ActiveSync, click on file and connection settings and untick the USB connection.(Very Important)
6. Connect the phone to the USB and turn the phone into bootloader mode (Camera & Power and Soft reset)
7. Run RomupgradeUt from c:\imate folder
7. The upgrade wizard will start, go through a few checks and proceed with the upgrade (normally you would eventually come up with the country ID error)
8. The process should then go through 3 stages which should last about 15 - 20 minutes.
9. Lastly do a soft reset and you should see your MDA German compact with a new WWE (WorldWide English) ROM
10. In ActiveSync, click on file and connection settings and tick the USB connection so that you can see the device for ActiveSync. Plug in USB and perform yor sync and start the process of moving your data and programs across.
I do hope this helps!
PS I was think of compiling a short illustrated guide taking a lead from some Spanish posts on this matter, let me know what you think.
Excellent! Thanks so much - now have an english MDA!!! And I like the update better too! Definitely like the new color of the number pad
Had a little problem getting to USB mode when I did a hard boot... had to do it a second time after it was already connected and hold the reset for longer... but otherwise all was perfectly clear.
Thanks again!
I love you people
Oh Man, excellent instructions, excellent file, excellent, excellent. I have a T-mobile MDA compact with a Chinese Version of the Pocket PC. downloaded the Jam ROM, installed it. work like a charm. Thanks for the advice, instruction and files.
Hi,
I just went into ftp://ftp.xda-developers.com/Uploads/Magician/ and it is empty? has it been moved as I would like to follow the proceedure and update my MDA as well.
Many Thanks
The ftp gets re-organised from what I have seen
Goto the ftp site Magician folder, shipped roms folder
Download rom of choice preferably the latest WWE revision, ensure you have the MAUpgradeUT tool this will ignore the country ID error.
And follow the standard install instructions in the previous posts
Have fun
German to English Rom
Many Thanks, but one question I have seen in other strings that the ROM is 250Mg this one is a lot smaller?
German to English for MDA
OK Fantastic, I now found the ROM followed the instructions above and now have a great English device
Thanks to all that helped me....
PLEASE HELP (FAILURE DURING INSTALATION OF NEW ENGLISH ROM)
Please somenone help me!
A try according to your manuals to change rom from german to english and during the instalallation the blue screen on my computer appeared and it restarted.. My MDA has only tvo words on its display: above Usp and bellow v1.02 . It doesnt work... How can I now finish installation, bescause actvS can not connect phone with my computer... It looks like it's dead...please help...
Don't worry, you in bootloader now. Just run the maupgradeut_noid.exe & the upgrade will start. Might be that you need to uncheck the usb connection allowed in Act.Sync. You're Magician is far from dead in surely you can fix it either with a shipped or with the maupgradeut_noid or with sd flash.
So just relax & restart your executable.
Cheers, M
Related
Okay, I bought a MDA Compact from T-Mobile 2 days ago, The Problems is that the Device is German and I Speak and Read English, Could someone walk me through to change it to English, I read so many tips and none work.
ROM-Version:1.12.2.21 GER
ROM-Datum: 11/14/05
Furmempfangerversion: 01.12.20
Protokool-Version: 4.0.13.23
ExtRom-Version: 1.12.02.106
Need to read some more, like this one:
'XDA mini (MDA compact) with German ROM to English ROM'
@ http://forum.xda-developers.com/viewtopic.php?t=36002
Basically you need a WWE shipped-rom & maupgradeut_noid.
unzip the shipped-rom, put maupgradeut_noid in the same dir. as the unzipped files. Connect your magician with usb & execute maupgradeut_noid twice.
Or go for an SD-flash.
Cheers, M
Thanks
I tried that and I get a error 103: ROM IMAGE File Not Found, Thanks for that, what is the way with SD-Flash? I''l try anything....
Ulymanchild
I think you didn't extract the ROM before using the maUpgradeUT_noId file...extract the EXT file with winrar adn then in the contents use maupgrade_noid
EXT File
Okay this is what I have
MDACompact_WWE_1.12.152 and MaUpgradeUt_noID I put this all in one folder and I tried to run and still the same ROM Image Error.
I have the MaUpgradeUt_noID with the GETDEVICEDATA and the ENTERBl and still nothing, could somebody walk me through like I was a child who was born yesterday. ;-(
I don't understand the EXT File thing either when I download all these stuff from XDA website I have them in zip and I just extract them normally with XP. What am I doing wrong?
It's not that difficult:
- Unzip NL_11300_131_11200.exe (or any other shipped rom) to a folder, so you get the maupgradeut.exe etc.
- Copy the getdevicedata.exe to your Magician and execute to write DeviceData.txt
to \Windows and view with notepad
- Hexedit header to correct ID from DeviceData.txt
(probably only if using a rom from other provider)
- put maupgradeut_noid.exe in the same folder as the devicedata.txt, maupgradeut.exe etc
- run maupgradeut_noid.exe to upgrade CE image
Regards, M
I meant EXE file and not EXT file......
I think MDACompact_WWE_1.12.152 is a single EXE file with an Install shield icon.....
you have to extract it to get the ROM files
to do that download WinRAR from www.rarlabs.com...install it...
after installing winrar if you right-click on MDACompact_WWE_1.12.152.exe you have an option for etracting...extract it to a folder....now copy MaUpgradeUt_noID.ext to this folder and execute it...now you won't get the error 103
For you information ROM files have the extension .nbf....you find .nbf files inside the extracted filder
Hope you get it
Thanks
Well I want to thank all for the advice but I tried step by step and try it again and nothing ROM ERROR 120 COUNTRY I will go by a SD-Flash and try it that way if that doesn't work owell I gues I will sell it and go to england and buy me one there,,,;-(
Did you run the maupgradeut_noid twice?
The SD flash will work, just as long as you copy the first 416bytes of your own rom to the new rom.
succes, M
Ulymanchild
Hey, before selling it, read this:
http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
This 120 country id error is easy to solve.
After you run the first time, just press "Exit" as the install wizard tell you.
After you exit from the wizard, run the MaUpgradeUt_noID.exe once more. This time you will not see the error again.
Hope you get it
Almost work
okay I tried what you said and I got as far as the what it's going to upgrade to put it losses the connection, what could be wrong, you gave me the best advice so far and I thank you.
I'm clueless on this point besides the usual 'try again'?
SD will work there's a nice 1.13 on the ftp -) mine) so you can always go for that approach.
Instructions:
- download the 1.13BS rom from the ftp
- get ntrw.exe & romugrade.exe from the ftp
- Download the Hexeditor from:
http://www.hhdsoftware.com/hexeditor.html
- get a SD-card > 64MB
- make backup of everything you want to keep from your magician & SD-card. everything will be wiped!!
- fully charge your magician
- uncheck usb connection in Act.sync on your PC
- put your magician in Bootloader (camera & power & soft-reset at the same time for a few seconds) wait till screen fades & reads 'serial v1.0x'. Screen is very dark since backlight is of.
- connect usb, now the screen reads 'usb v1.0x'
- start romupgrade on your pc
- pick the magician connection in the listbox, wces something I belief
- now a screen pops up
- type d2s in this screen
- follow progress on pc & magician
- wait till checksum finishes
- get SD from the magician & put it into a cardreader. DON'T FORMAT!!!
- put ntrw in C:\
- start a command window
- type on commandline: ntrw read myrom.nb1 [sd driveletter]:
- follow progress
- error at the end is normal
- make a copy of myrom.nb1
- open myrom.nb1 & the BS rom with the hexeditor & replace the first 416 Bytes of the BS rom with the first 416 bytes of myrom.nb1 & save it to mybs.nb1
- type on commandline: ntrw write mybs.nb1 [sd driveletter]:
error at the end is normal
- put the SD in your magician
- now it should read 'press power to flash'
- press the power button
- watch it reaches 100% - checksum will always fail
- reset & hopefully enjoy the new rom
Cheers, M
Back Error
I tried to back up my rom with romupdate.exe and when I try to pick USB it does not work only thing that showes is com2 com4 I also unchecked USB Connection on ActiveSynce and it still doesn't work so what the hell, okay I will pay some one to help me I will call the person and have them walk me thru!!!!
HELP
Seems like there's something fishy with your USB connection or your device. Best thing is to find someone nearby who has done it before & use his/her equipment .
Guess you're not getting it to work by talking through.
Terribly sorry, M
Could it Be
I just found out that my device is a HTC Charmer the new one that came out in December and it does not work like magician...So I have to try something else
You lucky bastard,
There is progress in that field. So keep looking.
Cheers, M
Can I try the first procedure OLTP described in the begining
I have a Qtek S110 with a French ROM and I need the English version.
I have downloaded MagicianRadio_1.13.00_maupgrade and Qtek_WWE_1.13 from the ftp site. Are there any special precautions I have to be aware of?
Thank you very much for your help.
Best regards,
Sidi
Make a backup of your existing rom, in case you might want to fall-back for warranty issues etc. & a separate copy of the ext-rom cabs in case of provider settings etc.
& make a back-up of all pim data as everything will be lost & programs need to be reinstalled. Don't forget to mark your provider settings for gprs access, they're usually located in one of the ext-rom cab-files. You can write them down too.
For the rest it is fairly simple, connect usb & execute the maupgradeut_noid twice.
regards, M
I am new of the forum, I have just purchased a nm8 used magiacian (t-mobile MDA) it is I bring a problem.
The preceding owner has begun an updating of the rom that has not gone to good end and the device doesn't now set out anymore and from the following error:
USB V1.00 (if connected USB).
Serial V1.00 (if disconnected).
Bootloader mode ?
What must I do for going on?
I hope in a help
Best regards Luca
help
I pray you helped me, the first post is from beginners, but believe I have followed the standard procedure.
unloaded the rom
unloaded no-id
always tried upgrade more times failure.
HELP !
for the beginning you should use a standard ROM to get familiar with the device.
just go to the t-mobile website, downloads, chose your device type and then look for files named softwareupdates or so.
they will be in zip-format.
there will be an application in there. just go into bootloadermode, connect your device and start the upgrade. it's completely guided and will last about 20min.
although most of the ppl that read/write in this forum didn't install the eROM, I think you can start with all the cusomization stuff. If you have become more familiar with your mdac, you can try other modified ROM's.
just ask if you have more questions
greetz Stefan
i have to say that using standard rom (jam rom downloaded from club imate)
the upgrading applications hangs.....
and leave magician in booting mode, ready to be erased....
i was desperaded, but last experiences with motorola phones and its firmwares advice me to try again
so i had to launch againg that apps and it starts erasing actual rom....
i think there is a bug in few roms.... may be only in its installer
Have tried with the T-mobile rom but doesn't even go with that!
Caslu,
Have you tried a hard-reset?
If so: I guess you've got a decent TMO magician rom downloaded. So get maupgradeut_noid.exe from the ftp. Extract all the files from your TMO shipped-rom & put them in a directory, so you get some .nbf files, enterbl.exe & maupgradeut.exe. Now put the maupgradeut_noid.exe in the same directory. Connect your magician to the usb. It should read usb v1.00, if your magician isn't in bootloader press camera&power&soft-reset at the same time for a few secs. till you get the usb or serial reading.
After connecting it to the usb execute the maupgradeut_noid.exe twice, first execute might give an error 120 second should finish.
If this fails make sure you got a magician & not a charmer.
If it's a magician return it, cause I think it's broken. Hey why buy a device that's in an inconclusive state??
Regards, M
I think really that It broken.
Have picked it because little cost!
non one reply .......
caslu said:
I think really that It broken.
Have picked it because little cost!
non one reply .......
Click to expand...
Click to collapse
Download the latest shipped ROM for the country your magician was first sold in.
Ensure Activesync is in the normal mode (USB check is ON).
Run the executable ROM update program.
Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)
Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english
Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does
Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks
Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.
dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.
Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?
no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site
you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier
I put it in the bootloader state and still the same message
I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done
Sorry, but i don't know what to say. Are you using the original cable?
Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4
Hi. I have got MDA-1 from T-mobile. I'd like to change my language in to english. Will You be so kind as to learn me step by steh how I should to do with this change? I've got usb cabel and device. Thanks for Ypur kindnes.
http://forum.xda-developers.com/viewtopic.php?t=6628&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=5740&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=5213&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=2969&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=313&highlight=change+language+english
One of them should clarify.
Otherwise use the searchbutton yourself....
Stefan
I'm new at this sort of things and I dont understand some of those instructions. I wrote I'd like You to tell me step by step if u can.
It depends on your currently installed ROM, but normaly this should work:
1. Download new ROM from http://wiki.xda-developers.com/index.php?pagename=ROMVersions or http://www.romkitchen.de
2. Make a hard reset of your device
3. Reconnect your device via ActiveXync (You can use guest partnership)
4. Run the downloaded exe file an follow the instructions.
5. Enjoy your new language
All this has been told hundreds of time.....
Stefan
Which of ROM'a will be the best for my MDA? I have current ROM version 4.00.33 GER. Where I have to run my exe file ? on PC or PPC ?
OK. I have done it Thanks for help I'm so grateful
I've done it but now my MDA doesnt connectong with my PC. I have not got on MDA any communication program. I've got nothing !! What should I do now ?
VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________
'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?
The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?
Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...
upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks
My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...
gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________
r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...
whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF
Can you plz. give us link for zip file instead of the ttornet one
thanks in advance
can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?
hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?
Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?