Database Users

Details instructions for SD card upgrade to Siemens A.30.09

Hope this helps, this is a simple process, these instructions appear long and difficult because i've added quite a bit of detail.
Prepare Everything
1 - Download and install XDATolls http://wiki.xda-developers.com/wiki/XDAtools
2 - Connect your PocketPC and make sure that ActiveSync is running
3 - Delete all files on your SD Card (in your pocketPC)
Extract the ROM files & get ready for the upgrade
4 - Run the .exe file you download from Siemens, this will extract the files into C:\Program Files\SX56 upgrade utility. Don't proceed with the install, just exit it after the extract is completed.
5 - Confirm the existance of the file C:\Program Files\SX56 upgrade utility\english\NK.nbf
Using XDAtools (OS Image tool) transfer the ROM onto your SD card via your PocketPC and cradle (this is a new feature)
6 - Run the XDA OS Image tool (part of XDA Tools)
7 - As your source select the file C:\Program Files\SX56 upgrade utility\english\NK.nbf (directory is selected by clicking the square button with dots)
8 - As your destination select from the drop down box SD Card
9 - Click copy to transfer the file, if it fails check that ActiveSync is running & try again
Re-flash Image using Wallaby Bootloader method
** THIS WILL ERASE ALL DATA ON YOUR POCKETPC, you have been warned, make sure you've got a backup of everything you need.
10 - Plug your PocketPC into AC power & Make sure that your SD card is in the slot on your pocketpc
11 - Using the stylus top, hold down the left hand soft-reset, then press the power button.
12 - The bootloader should find the new ROM image on the SD card, press the action button to start the load (action button been the central click of the direction button)
13 - The load process will take about 5 minutes or so
14 - Once completed, use the stylus top and press the battery disable button, leave for 5 seconds then press it again to enable the unit.
Enjoy the new ROM, note that the first bit of any audio is played at a reduced volume, this doesn't help short ring tones nor fonix voicedial. Other than that the ROM seems quick and highly stable.

very good guide: question
do you know if this will touch the RSU?

no thats the whole point of copy'ng out the nbf file is that you dont mess with the rsu

which version is better?
thank you for your reply rudegar.
What version do you recommend for a SX56?
A.30 (cooked) , 4.01 (cooked) or the one released from siemens?
I heard that 2003 have some bugs, is it true? I have ppc 2002, is it worth the upgrading to 2003?

i dident have too many problems with my xda1 when i upgraded it to 4.01
org from tmobile
dident have a single SD card ereasing issue like some people report
but nor did i really think that the os was all that different

A.30 or 4.01?
What about A.30? what are the differences between both? which is better?

Who can give me their T-Mobile number so I can dl the upgrad

hi,
Sum1 here who a T-Mobile subscriber? I have a T-Mobile PocketPC that I need to unlock tho I'm not a T-Mobile subcriber. I need a T-Mobile mobile number to get the upgrade at http://www.t-mobile.com/products/handhelds/pocketpc/download_popup.asp
Or if someone already downloded the upgrade where can I download it without keying-in the mobile number? Thanks.
BTW, I have a question, if I download the upgrade, can I now use the XDAunlock.exe file here (is my ROM automatically updated)? My ROM version now is 3.14.40 ENG. I'm having trouble with the ROM updater here since im not linux literate.
Email me at [email protected]. Thanks a lot

I already downloaded the TMobile upgrade. Can somebody tell me if this upgrade will indeed upgrade my ROM to the correct ROM version with wirelss modem feature to I can use the XDAunlock.exe to unlock my xda? Thanks

The answer is NO, the latest TMO upgrade is 4.01.00 and it has no wmodem.exe application. If you need to unlock your device, go to www.xda-developers.com/XDAunlock/ and use the tool there.
If it doesn't work, try the kitchen at www.yorch.net and cook a new 3.17 based ROM and flash your XDA and unlock it, then you can upgrade to TMO 4.01.00 later.
BTW, the TMO upgrade affects the RSU part. So, unless you are a TMO user you better use the .nbf file only with either SD card or use the XDAtools to flash your device.
Good luck.

Hi Biso,
How can I "cook" a rom? http://kitchen.romanweb.com/kitchen/index.php when I go to that website, the only thing needed to be selected are the 3.17.03 ENG O2-Euro (6656 kB available) and XDA-developers AutoConfig data (113 kB) under it. and the unlocking option right? This wil be the first to use my pocket pc device, which option should I select under How would you like your ROM?
installer EXE
zipped NK.nb1 (SD-card flashing)
zipped NK.nbf (advanced users)
and should I do anything on the NBF header string?
Thanks man.
If I use the intaller EXE file, how will I "flash" it on my device? What are the differences between using the exe,nk.nb1 and nk.nbf? Thanks again.

I notice that above the page there is an indication, by default when I go to the page (without checking or unchecking anything) the top of the page states:
space in ROM: 6656 kB
used: 7729 kB
free: -1072 kB
*overload*
Should I limit my ROM on 6656 kB (meaning that I have to uncheck other options)? My deveice is an XDA 1. Thank you.

Hi ...
Yes, you have to uncheck some optional s/w till the guage line is "Green".
If you are not familiar with the SD method, just select the EXE type. It will generate a 15 MB exe file which you should download it to your PC. Connect your XDA to your PC throught the cradle and ActiveSync and run the exe file while the cradle is connected to the power supply and follow the instructions on the screen.
Good luck.

Thanks man for the quick reply.
Sorry I'm getting confused. Should I transfer the exe file to the device and run the exe file on the device?
Thanks again

The exe file runs from your desktop, your xda will need to be synced with your pc before running the exe.

Thanks so this is what I have to do:
First sync my device (cradle connected to the power supply) and after synching, run the exe file on my desktop computer (no need to transfer on my device or anything?). That's it?
Is this fail-proof? Will it not damage my device if ever there was an interruption or sumthing? How can I make sure that I can go fail-proof? Kinda worried coz I just got hold of my xda 1 (T-Mobile edition), I'm a palm user before. Thanks
BTW, my PocketPC Version is 3.0.12039 (Build 11178). ROM version 3.14.40 ENG. I don't know if my PocketPC is 2002 or 2003. I'll be using the yorch.net ROM (http://kitchen.romanweb.com/kitchen/index.php). All compatible?

ROM 3.14 is a PPC2002 one and all ROMs on Yorch.net is WM2003 except the 3.17 one.
Just to ensure it's a safe process, remove the SIM and SD card from the device and stop any running applications on your PC.
Good luck ...

Thans Biso. How bout a step by step guide? Pls pls pls? Id really appreciate it man.
Like
1. Sync the device (Power connected to the cradle)
2. Run the Rom Exe file
3. etc.
Just to be sure. BTW, is the exe file really just 150KB? Is that all I need to unlock my device?

Hi ...
There is nothing really needed more than what you just wrote:
1. Connect the XDA to the cradle and sync while the power is connected.
2. Run the EXE file and follow the instructions on the screen.
BTW, the EXE file should be at least 15 MB, seems your ROM was not "cooked" well .... try again

Ohh ok. I downloaded twice and all I got was 150kb. how will I know that the ROM i got is "cooked" well so I can be free of troubles. Can you just give me a link to the right/"well cooked" ROM? Thanks man.
One more thing, should I run the ROM EXE file while my device is synching or after the synch?

it's still 150 kb. Here's what it says when I view the log
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739Cannot fit files in given sectionsError splitting files

seems there is something wrong with the kitchen work space ... it happens sometimes ... no big issue.
You may try this kitchen as well http://lumpistefan.dyndns.org/
P.S: run the EXE file after the device is synced

which one should I pick? Pocket PC 2002 ROM or Windows Mobile 2003 ROM. And what's the difference. Sorry for my ignorance. Thanks for the replies.

Biso,
Can I use an MMC card for flashing? I MIGHT be able to borrow an MMC card. Also, I dont have a card reader but I have a digital camera which I can use to transfer the ROM image from my desktop computer to the card. Would you think it would work? Thanks again man.

will the exe file below work for me?
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
and
http://www.xs4all.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
This is my Device's Information
ROM version: 3.14.40ENG
ROM date: 11/26/02
Radio version: 6.18
Protocol version: 324e4
Pocket PC Version 3.0.12039 (Build 11178) (Don't know if this is 2002 or 2003 pocketpc)
Pls reply. thanks

Hi ...
1. As the figure tells, WM2003 is the latest than PPC2002.
2. I can recommend to use TMO 4.01.00 as I have it on my device for almost 3 months now with no problems so far (few things have to be tweaked tho), but I heard good news about AT&T 30.09 ROM as well.
3. I can't confirm that MMC can replace SD card. I saw some threads on this but no final results.
4. The answer is NO, the only way to move the NBF file to the SD card is either a card writer or by using XDAtools with the XDA cradle. I don't think the card will be recognized by the bootloader otherwise.
5. SER-V12 is a PPC2002 ROM and useful only if you need to unlock your device (which I believe it's already unlocked).

No I just want to unlock the device, that's it I don;t really want a ROM upgrade, just so happens that I need to have a ROM upgrade to unlock the device
SO I can use the SER-V12? Thanks a lot.

Converting German to English for German T-Mobile MDA Compact

I've seen a bit on this site about converting a UK T-Mobile MDA Compact to newer english versions but not for the German T-Mobile MDA Compact. As a novice to this stuff I have three questions:
1) Is it the same procedure for my German T-Mobile MDA Compact as it is for the UK version?
2) Can anyone please give me the link to the newest download for the files I need? (not sure I have it)
3) this is what I plan to do (see instructions below) - got it from JFRAN at www.modaco.com's website. It seems that I need both the rom and this maupgradeut_noid file... I'm not sure I've found the most recent rom file and I havent seen the file maupgrade file with the exact same name on the ftp site here... I've already asked for a link to the most update file, but can someone confirm these directions look ok?
Thanks.
From Jfran at: http://www.modaco.com/New_JAM_rom_from_iMate-t206571.html
Any of the experts willing to put a step by step guide to installing the 1.11 . i have a T mobile MDA , and it all seems so complicated . I am bricking it that I will end up with a dead device .
Tricky stuff, but can be done.
If you are able to get hold of the imate rom, you will need to extract its files and install the upgrade executable file.... esay isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a promt to reset the device
11. Hope that helps.

German MDA Compact to English with latest JamWWE Rom
Hi There
I have recently undergone this excercise on a new German MDA Compact and after undergoing lots of reading here and trying a few things. I have decided to contribute this back to the community.
Note ensure you have a backup of your original ROM and your contacts and personal data in case of errors etc There are quite a few posts covering this in the forum.
1. Download the zip file at ftp link ftp://xda:[email protected]ers.com/Uploads/Magician/ and select the JamROM_111.132WWE_noID_mod.zip file
2. Download, Unzip and extract to a named folder for instance c:\imate
3. You should end up with about 6 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and ROMUpgradeUt (this is the MAUpgradeUT_Noid file renamed so there is no need to download anything extra):
for info the maupgradeut is the file that runs the upgrade if you were an iMate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the XDA developers site.
5. In ActiveSync, click on file and connection settings and untick the USB connection.(Very Important)
6. Connect the phone to the USB and turn the phone into bootloader mode (Camera & Power and Soft reset)
7. Run RomupgradeUt from c:\imate folder
7. The upgrade wizard will start, go through a few checks and proceed with the upgrade (normally you would eventually come up with the country ID error)
8. The process should then go through 3 stages which should last about 15 - 20 minutes.
9. Lastly do a soft reset and you should see your MDA German compact with a new WWE (WorldWide English) ROM
10. In ActiveSync, click on file and connection settings and tick the USB connection so that you can see the device for ActiveSync. Plug in USB and perform yor sync and start the process of moving your data and programs across.
I do hope this helps!
PS I was think of compiling a short illustrated guide taking a lead from some Spanish posts on this matter, let me know what you think.

Excellent! Thanks so much - now have an english MDA!!! And I like the update better too! Definitely like the new color of the number pad
Had a little problem getting to USB mode when I did a hard boot... had to do it a second time after it was already connected and hold the reset for longer... but otherwise all was perfectly clear.
Thanks again!

I love you people
Oh Man, excellent instructions, excellent file, excellent, excellent. I have a T-mobile MDA compact with a Chinese Version of the Pocket PC. downloaded the Jam ROM, installed it. work like a charm. Thanks for the advice, instruction and files.

Hi,
I just went into ftp://ftp.xda-developers.com/Uploads/Magician/ and it is empty? has it been moved as I would like to follow the proceedure and update my MDA as well.
Many Thanks

The ftp gets re-organised from what I have seen
Goto the ftp site Magician folder, shipped roms folder
Download rom of choice preferably the latest WWE revision, ensure you have the MAUpgradeUT tool this will ignore the country ID error.
And follow the standard install instructions in the previous posts
Have fun

German to English Rom
Many Thanks, but one question I have seen in other strings that the ROM is 250Mg this one is a lot smaller?

German to English for MDA
OK Fantastic, I now found the ROM followed the instructions above and now have a great English device
Thanks to all that helped me....

PLEASE HELP (FAILURE DURING INSTALATION OF NEW ENGLISH ROM)
Please somenone help me!
A try according to your manuals to change rom from german to english and during the instalallation the blue screen on my computer appeared and it restarted.. My MDA has only tvo words on its display: above Usp and bellow v1.02 . It doesnt work... How can I now finish installation, bescause actvS can not connect phone with my computer... It looks like it's dead...please help...

Don't worry, you in bootloader now. Just run the maupgradeut_noid.exe & the upgrade will start. Might be that you need to uncheck the usb connection allowed in Act.Sync. You're Magician is far from dead in surely you can fix it either with a shipped or with the maupgradeut_noid or with sd flash.
So just relax & restart your executable.
Cheers, M

[ROM] Windows Mobile 6.1 for HTC ELF/ELFin

VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________

'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?

The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?

Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...

upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks

My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...

gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________

r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...

whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF

Can you plz. give us link for zip file instead of the ttornet one
thanks in advance

can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?

hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?

Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?

Htc 0300 in tri colour

I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated

Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions

i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp

Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1

i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...

Also, what did you do to get your phone stuck in bootloader in the first place?

my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x

Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls

i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.

Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe

i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%

Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.

Will try now and keep u updated
manny thanks x

Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck

Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.

Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom

Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!

i don't have a working pda to use :-( the only pda i have is my bricked one :-(

buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.