Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
sangasanga said:
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
Click to expand...
Click to collapse
Your solution is to downgrade to the previous kjam rom, then cid unlock, then flash the Qtek rom.
Just run the K-JAM_WWE_1010903_106_10110_ship.exe upgrader to err downgrade. ;-)
summiter said:
sangasanga said:
Hi guys.
I tried unlocking the CID with Lokiwiz0.2b but keep getting the error249 invalid vendor ID problem.
I updated my KJam with the latest iMate ROM thinking it had A2DP, but found it doesn't. I now want to flash the Qtek test WWE ROM which does. BUT after running Lokiwiz and selecting option C and then trying to update the ROM I keep getting the message.
I have tried unbundling Lokiwiz again in case it was a problem there, but no joy.
Any ideas anyone? or has it anything to do with the new ROM that maybe Lokiwiz can't address yet?
Click to expand...
Click to collapse
Your solution is to downgrade to the previous kjam rom, then cid unlock, then flash the Qtek rom.
Just run the K-JAM_WWE_1010903_106_10110_ship.exe upgrader to err downgrade. ;-)
Click to expand...
Click to collapse
Tried doing that but I can't downgrade. The RUU says says I must get an up to date version. I recall when I loaded the new ROM it said I can't go backwards afterwards.
Does anyone know how can I do that?
don't know if this would work but have you tried bootloader mode?
unable to unlock CID for my Imate Kjam
Can any one help me to unlock CID for my Imate Kjam.
I am unable to install WM6.
Will appreciate the help.
what is your ipl-spl
chg1282002 said:
what is your ipl-spl
Click to expand...
Click to collapse
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
johnnybazukatone said:
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
Click to expand...
Click to collapse
Hi i see yours is G4.
the way i CID Unlocked my wizard to install WM6.5 is:
I Downloaded SoftSPL ( it Temp removes the lock )
--- http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527 --
So after you downloaded that unZip it and inside there will be 2 CAB files.
move the CABs to your phone:
Cert_SPCS.cab )install on Phone 1st(
EnableRapi.cab )install on phone 2nd(
:
After you have installed them
Move The Rom you want to install into the SoftSPL Folder And Rename the ROM
nk.nbf
Then make sure the Phone is connected to Pc via Cradle/Cable
Then Just Run START-sSPL.exe (inside SoftSPL folder on pc)
tick and next on the screens that come up and then you mobile screen goes White (Dont Worry) then it will load rom you will have a bar on Desktop that loads to 100% .. just Let it finish then mobile reboots and you should be fully loaded with your copy of WM6
Hope This Helped
johnnybazukatone said:
mine its 2.16.0001 , can anyone help me? iv already search and see many threads about this but with no result for me =\ i think first i have to unlock the CID then update the rom... but still no result =\
Click to expand...
Click to collapse
Hi i see yours is G4.
the way i CID Unlocked my wizard to install WM6.5 is:
I Downloaded SoftSPL ( it Temp removes the lock )
--- http://forum.xda-developers.com/attachment.php?attachmentid=50344&d=1189619527 --
So after you downloaded that unZip it and inside there will be 2 CAB files.
move the CABs to your phone:
Cert_SPCS.cab )install on Phone 1st(
EnableRapi.cab )install on phone 2nd(
:
After you have installed them
Move The Rom you want to install into the SoftSPL Folder And Rename the ROM
nk.nbf
Then make sure the Phone is connected to Pc via Cradle/Cable
Then Just Run START-sSPL.exe (inside SoftSPL folder on pc)
tick and next on the screens that come up and then you mobile screen goes White (Dont Worry) then it will load rom you will have a bar on Desktop that loads to 100% .. just Let it finish then mobile reboots and you should be fully loaded with your copy of WM6
Hope This Helped
please just someone get back to me. I dont want someone to say REREAD THE FORUMS, cuz ive been through that, done it all, more than 3 times each, and NOTHING WORKS. I CANNOT TELL IF ITS UNLOCKED. I CANNOT INSTALL WM 6.0
jfrasca222 said:
please just someone get back to me. I dont want someone to say REREAD THE FORUMS, cuz ive been through that, done it all, more than 3 times each, and NOTHING WORKS. I CANNOT TELL IF ITS UNLOCKED. I CANNOT INSTALL WM 6.0
Click to expand...
Click to collapse
First off, state your problem, second off ALL CAPS IS TOTALLY ANYOING.
To check if your Device is locked, pit in a different simcard (so not a simcard from the same provider but a DIFFERENT one). If it asks a unlock code it's locked.
Second, installing WM6 (probably) requires your device to be CID unlocked.
(here comes the irony) Look up a topic, or use to search function on CID and you'll find allot of ways/solution to un cidlock your device and be able to flash it with whatever rom you want.
If you want to find out if your phone is CID unlocked, download Wizard Service Tools, install it on your computer and then click the CID actions button and it will tell you if you're CID unlocked or not.
It's my first post here. Done a lot of reading but still couldn't find the answer to this.
I got a sim locked T-Mobile Wing from T-Mobile. Still waiting for the unlock code. This could take a long time for my case. Should I wait until I get the code and unlock the Wing before flashing ROM??? I am very eager to play with the custom ROM's a lot of people are using.... If I do it now, will it cause problem later when I try to sim unlock???
Flash The Phone Before Sim Unlock I Ran Into That Problem B4
ilikepu said:
Flash The Phone Before Sim Unlock I Ran Into That Problem B4
Click to expand...
Click to collapse
What problem did you have? I thought if you do Sim Unlock first, there shoudn't be any problem. I am just worried about if I flash the phone first, the unlock code I will get from T-Mobile later might not work. Can anyone comment on this? Thanks.
i sim unlocked then flashed
the unlock code is stored in the phone operating system not on the sim card
but dont worry the phone will always recogize the unlock code every time u flash it. it never changes unless you hack your imei
ilikepu said:
sim unlocked the flashed
but dont worry the phone will always recogize the unlock code it never changes unless you hack your imei
Click to expand...
Click to collapse
So I don't have to unlock now and can go ahead to upgrade ROM and then unlock later with the new ROM? Just want to confirm. Thanks.
jrey said:
So I don't have to unlock now and can go ahead to upgrade ROM and then unlock later with the new ROM? Just want to confirm. Thanks.
Click to expand...
Click to collapse
yes you can flash before sim unlock. I have a wing and its not sim unlocked and I can flash and go back to stock with no problems.
ilikepu said:
i sim unlocked then flashed
the unlock code is stored in the phone operating system not on the sim card
but dont worry the phone will always recogize the unlock code every time u flash it. it never changes unless you hack your imei
Click to expand...
Click to collapse
that doesn't make sense.. everytime you flash your flashing a new operating system. theres no way the sim unlock code is part of the operating system.
It Probably Makes More Sense To Me
Basically With The Unlock Code Your Unlocking The Phone Not The Sim Card So It Is Saved To The Phone When You Flash The Phone You Erase Everything On The Phone
This is exactly why I am reluctant to flash it now since I have not unlocked the phone yet.
I know that, with some other phones like motorola, even if you have unlocked the phone, but if you flash with a wrong stock, you can lock it again and it is very difficult to unlock later...
Can anybody else share their experiences about the Wing?
If you follow this thread
http://forum.xda-developers.com/showthread.php?t=358225 you can unlock your phone without worrying about the code from T-mo. You will be able to flash any ROM you choose. Just follow it to the letter. Worked great for me.
My main reason to flash was because of all the memory the stock ROM sucked. You'll be amazed by the chefs in the forum.
ilikepu said:
the unlock code is stored in the phone operating system not on the sim card
but dont worry the phone will always recogize the unlock code every time u flash it. it never changes unless you hack your imei
Click to expand...
Click to collapse
The unlock is not in the phone's operating system... its in the phone hardware. I think many will get confused if you are telling them its in the OS since you flash the OS when you flash the ROM.
Everyone should know that the IMEI is hardware based like the MAC address of the phone. To change the IMEI would not only break US law's but would void you from unlocking it from a service provider. Flashing a ROM will not change the IMEI.
I just switched from a TyTN and while it's charging I'm downloading my applications again and backing up my TyTN's PIM.
There's only one problem now: I'm a noob again!
I got used to the Hermes tool (went through 3 TyTNs) but now everything is different. I don't need to change carrier, but I don't want the Rogers ROM. I got the ROM but not the unlocker.
Can anyone point me to an unlocker for the Elfin? I used the search button but it's pretty confusing.
N1c0_ds said:
I just switched from a TyTN and while it's charging I'm downloading my applications again and backing up my TyTN's PIM.
There's only one problem now: I'm a noob again!
I got used to the Hermes tool (went through 3 TyTNs) but now everything is different. I don't need to change carrier, but I don't want the Rogers ROM. I got the ROM but not the unlocker.
Can anyone point me to an unlocker for the Elfin? I used the search button but it's pretty confusing.
Click to expand...
Click to collapse
Sim unlock your phone for free using this tool and the unlock code generated by it:
http://forum.xda-developers.com/showthread.php?t=418892
CID unlock your phone for flashing other cooked ROMs:
http://forum.xda-developers.com/showthread.php?t=408637
Be very careful in CID unlocking your phone. One incorrect step and you can brick your device.
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?