Related
Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...
1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!
hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks
1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!
Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?
So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?
There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.
mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.
try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.
flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use
Sorry to bother you all again with a bricked Terra, but I need help from all my chinese friends here!
I live in China, but have a phone from Germany, the Terra, and no one in my city can repair it, because it's bricked.
I tried to search the net for a repair center in China, but there seems to be none.
Please, prove me wrong and post all the adresses you have got, where they can unbrick my Terra
Thank you a lot,
greetings from Changsha 长沙
Numerous forums in China about Smart Phone or WM6 Phone, etc. You can find some useful information on it.
The problem is my chinese (and my lack of knowledge). It is not good enough to crawl trough chinese forums. But actually I didn't that there were any, so your answer is constructive.
I will try to ask a chinese friend...
but thank's for your answer
http://bbs.pdafans.com/viewthread.php?tid=432638&highlight=c858
Suggest your Chinese friend to check this post.
Note: I am living in Chengdu.
If you bricked your terra as most people brick their terras, that is, during an attempted rom flash that didn't quite work, you will need to bypass the CID lock on your phone using USPL and install another ROM. Normally, one could just install their RUU, but such is not possible, as the Terra has no RUU.
I refer you to Papamopps, who has a (formerly) bricked terra
The main problem is: Bypassing CID lock (a.k.a. the ability to flash *ANY* firmware on your device)
First, thank you stmartin!
Hello Fzzyrn; yep, I think Tramuyo is right. The problem comes with CID Lock/Unlock.
I also contacted Canonyang and read alot, so here is my roundup (maybe it helps some of you to get new ideas, who knows).
The CID is a kind of chip or a piece of software implemented in a chip. It functions as a lock and will open only as the right key is inserted. Infact this key is the original RUU. Once your device is switched on (means your WM has booted), you can play around with the lock itself (because it's open now) and manipulate it (via USPL) or completely change it (via HardSPL). That is what makes it hard (hopefully not impossible) to flash via SD-card.
The other way, as Canonyang told me, is to change the physical chip that hold the CID itself. After that you have to boot up and play with the lock again, to really unlock your device. That is the way they unbrick Terras or Heralds here in China.
So, at least I got a new idea, but as long as I can not program I need to find the right place to post it
It's good that you did the research yourself.
just use the USPL to flash any rom that you want. That SHOULD bring it back to life, assuming you have access to the bootloader.
Fzzyrn, I just tried that several times before (again and again) and in fact I tried it just now again.
I can only set my phone in bootloader mode but then nothing happens (as a matter of fact the battery loads ). Means I can only "run" the bootloader but not modify it. Maybe it is because I can not get an activesync connection?
But thank you for giving me new hope
Right now I'm waiting for an answer by another forum member and I'm also closely watching Tramuyos work. If there are no news, I have to send-in my xda.
Hey guys, first post! I google'd "How to unlock 8525" and I am overwhelmed by everything that's on it. Can someone give me some clear answers on how to unlock the Cingular branded 8525, so I may use it on my T-Mobile network? Sorry if the answer is obvious, but I've read so much stuff that I'm a bit confused. Thanks in advance guys!
First make a note of your radio rom - settings>system>device info.
Then use this to unlock your Hermes (You'll need to read a bit too...) - http://forum.xda-developers.com/showthread.php?t=293665
THEN Hard SPL your phone (use ver7. After you finish your SPL will be 2.10 olipro) - http://forum.xda-developers.com/showthread.php?t=296722
I like to use the sd card method of flashing this as its safer and you don't get sync errors like the pc. Also no little "accidents" to brick your nice new, EXPENSIVE toy... Look on page 116, post 1160 for instructions and needed apps...
You can then put a new radio rom or whatever OS you like on it... I use the sd card method here too BUT just leave out steps 5 & 6 from the sd card method for installing Hard SPL (don't need sspl.exe).
Cheers...
And Welcome.....
Thanks for all that What OS and radio choices do I have though? What are the pro's and con's of each? Thanks in advance!
Radio roms are area and carrier specific. Thats why I said to make sure you know what your old one is. Unlocking your phone will downgrade your radio to 1.16.xx.xx This is neede to unlock your phone.
Flashing the radio is RISKY. If something gos wrong then 9 times out of 10 you have a brick, and the 10th time you have divine intervention to get it going again... Its best to find a good radio rom and don't flash again unless you know its gonna be better...
As for OS roms, go to the Hermes WM06 forum. There are plenty of roms there that are cooked by our brilliant chefs.. I believe there is a post at the top showing you some of the later ones. DON'T bother asking whats best though because a rom choice is a personal preference... What I like and what you like may be 2 VERY different things...
Make sure you have Hard SPL ver 7 installed and (especially for the radio rom where you DON'T want any interruptions) use the sd card method.
As Wam7's quote says - Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not flashing with a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!" jdc
Cheers...
Thanks I saw a picture that showed the processors mhz, and it seemed to let you downclock it, where can I get that? Also, what are some useful programs and such to have?
Hi, here's some great info reference by veyka for U:
http://forum.xda-developers.com/showthread.php?t=419158
Well...
I'll be honest with you. I had this little dilemma not too long ago and discovered that unless you want to pay close to $50.00 to get it unlocked from one of those unlocker sites, you MUST request from AT&T to process your subsidy unlock code. Almost all wireless carriers that sell phones with their branded name on the device or on the splash screen are locked to that specific carrier, for marketing or whatever the company desires. You must obtain your IMEI number, (just enter *#06# on your keypad) call AT&T customer service, request a subsidy unlock code, (just tell them you plan on using the device overseas and are not interested in their overseas calling plan they will then try to sell you) and wait about 1-2 weeks for an email reply. Trust me when I say this, AT&T has NO IDEA what the code is or what the status is once they have submitted the request. It is transferred to their "Tier III" tech support division, which is why it takes so long to respond. Just wait it out, and your patience will pay off when you receive the email. I'm sure you know that once you get the unlock code, all you must do then is insert a SIM from any carrier other than AT&T, reboot, and your hermes will prompt you to enter subsidy unlock code. It is usually either an 8 or 9 digit code. Be careful when entering, as too many wrong attempts will "Brick" your device. It is then you will be able to use T-mobile's service. I also had my number ported to T-mobile's network...All you have to do for that is ask T-mobile(Don't tell AT&T) to port your number for you and ther's not a damn thing AT&T can do about it. Now. As far as ROM flashing is concerned, I had to learn by thumbing through the wiki, anf forums and making many posts like yourself. First, as described by ultramag, you MUST install HardSPLv7 on your phone. once that's done and you have verified via your bootloader screen (pwr+ok+reset sw) It should say something along the lines of HERM100 IPL-1.04/HERM100 SPL-2.10.Olipro-----> Then you can start looking at flashing ROMs. Don't worry about flashing Radio ROM, that's not necessary. Any questions, send me a msg.... Good luck flashing!!!
Thank you, both the Sim unlock and Hard SPL thingy went well. At least the process of downloading and executing the programs. Both processes stated successfull completions once I figured how to to run them properly. 1 attempt on unlock, and I didn't quite understand the instructions the first time through on Hard SPL, but the 2nd time one the on-screen popped on the device it was simple enough.
Once I test with my sim card later today I'll give the total thumbs up, but so far so good before I go "ROM shopping".
Oh and its a Cingular 8525 that I'll be using on T-Mobile (Herm100)
Just make sure when you Hard SPL your Hermes the SPL is changed to 2.10 oli.
You need to use Hard SPL V7. Its the latest and safest version.
If you unlocked your Hermes then you might be using an older, not so safe version of Hard SPL which may not help you to unbrick your Hermes if, god forbid, anything goes wrong with the flash.
Just a piece of advice..
Cheers...
How can I tell it's unlocked?
I have both an 8525 and a Tilt. I "unlocked" the 8525 using a program I downloaded from here, and the Tilt using the modified radio rom approach.
I took the 8525 to a T-Mobile store, and when we put the new sim chip in, it wouldn't work, it wanted an unlock code. I haven't tried the Tilt yet and before I do (The clerk at the store hinted that she thought I was a crook of some sort for having an unlocked phone with the Cingular logo on it) I would like to be SURE it's unlocked.
Is there some kind of test I can perform, or a registry key I can check or something to verify the unlock really worked? The program I ran to unlock the 8525 (Herm_Unlock_v3) gave no errors and stated that "Device SIM/Network lock removed!" - but obviously it wasn't.
So, how can I check before I go back to the store, that the devices are really unlocked?
Walt
Hello All,
I have flashed my T-Mobile UK branded HD2 with an official HTC ROM using the GoldCard method and then to several Cooked ROMs using HSPL.
Does this mean my phone is now unbranded and I can flash other HTC Official ROMs without using the GoldCard method? i.e. how someone would flash an unbranded HD2 bought say from somewhere like mobilephonesdirect.
I'm aware my phone is still locked to the T-Mobile network which I'm fine with. My question is purely to do with removing T-Mobile's customizations.
I'm really asking because I want to be able to flash a valid HTC ROM to my device if the following happens:
I install HSPL
I flash my device to a cooked ROM
Something goes wrong
I can't get active sync to work/device won't boot into windows
I need to go back to official ROM for warranty
Cheers,
mac
If you use hspl no need for goldcard at all. you can flash anything from usb with hspl, official or cooked.
You dont need the phone to be booted to flash over usb. Boot to bootloader, connect usb, run the flash.
Thanks Sam,
I was under the impression you had to be connected via active sync to FLASH using HSPL (at least that's what the instructions say when using the tool).
But I still would like to be able restore my to a warranty friendly state.
Is my phone unbranded once I've flashed with the GoldCard or must I use the it every time I want to flash without HSPL?
Thanks,
mac
macgrewal said:
Thanks Sam,
I was under the impression you had to be connected via active sync to FLASH using HSPL (at least that's what the instructions say when using the tool).
Click to expand...
Click to collapse
Yea thats a common mistake caused by the way the guides, and various other answers in threads are written.
When you connect the phone in bootloader mode, so long as the word serial changes to usb you should be good to go.
But I still would like to be able restore my to a warranty friendly state.
Click to expand...
Click to collapse
Of course. You have two ways
1 (for both methods)- download the tmo original official rom, official roms thread, 1st post, 1st link, 1.43 folder.
then either
2 - extract the nbh file, copy it to sd card (no need for goldcard, stock 2gb card will be fine) rename leoimg.nbh then start phone in bootloader to flash.
OR
3 - STEP 1 - run the t mo stock you downloaded and flash over usb, which restores the rom to stock, and then STEP 2 - run HSPL2 again and choose the stock spl. (HSPL has 8 spl's listed when you run it, 4 stock and 4 hspl,) Choose 1.43.0000 and thats it, back to stock.
Is my phone unbranded once I've flashed with the GoldCard or must I use the it every time I want to flash without HSPL?
Click to expand...
Click to collapse
That doesnt really make sense. As soon as you flash any method, the phone is then unbranded. removing the tmo rom is unbranding.
What YOU mean is ''is the phone rom unlocked?' and the answer is no, it will always be rom locked to tmo, (different to sim lock) so if you want to flash without hspl then you will need the goldcard.
Cheers Sam,
That answers my question. HSPL it is.
Is there a way of removing the ROM Lock?
macgrewal said:
Is there a way of removing the ROM Lock?
Click to expand...
Click to collapse
only hspl. nothing permanent. (well, hspl IS permanent till you remove it, but you know what I mean)
Am i reading this correctly? You are saying that HSPL removes network sim lock?
I need to know whether i will be able to unlock my T Mobile UK HD2 on 1.42 SPL, after a HSPL flash and i have put another ROM on my phone.
Is there any way that flashing can remove the sim lock or prevent me from being able to unlock my phone?
no you miss read the post. rom lock is not sim lock.they're unconnected.
Can anyone answer this, so i can get on with it?
samsamuel said:
no you miss read the post. rom lock is not sim lock.they're unconnected.
Click to expand...
Click to collapse
Okay thanks,
sorry i missed your post.
Do i have to buy and unlock code or is there a way i can unlock for free?
thanks again
randommann said:
Okay thanks,
sorry i missed your post.
Do i have to buy and unlock code or is there a way i can unlock for free?
thanks again
Click to expand...
Click to collapse
your network will give you it, maybe, but they'll keep you waiting. lot if people successfully used pay sites and ebay. look around there are fitness of threads on the subject.
randommann said:
I need to know whether i will be able to unlock my T Mobile UK HD2 on 1.42 SPL, after a HSPL flash and i have put another ROM on my phone.
Is there any way that flashing can remove the sim lock or prevent me from being able to unlock my phone?
Click to expand...
Click to collapse
Off Topic, but, a word of advice (and to all who may read this).
I have noticed a few of your posts asking stuff that is readily available in the stickies at the head of each forum section.
Things like unlock and memory available etc.
If you really want to know these things then read all the stickies, then search and then ask if you are still in the dark.
Jumping in with questions that have been asked many times over is not a great way to get the attention of members.
Remeber the stickies are there for a reason.
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0000
Is there any way to find the original rom or is there any way to unlock the cid and then just put any rom on it? I dont have the working pda or wm device to do goldcard method. I know there is way to do the goldcard method without the WM device but then I need a desktop or laptop with a PCI or internal cardreader installed whereas I have got a usb card reader.
can usb card reader do the goldcard method without the wm device?
any suggestion will be appreciated since it has been almost 3 years for me to get my device back to life.
regards
plz suggest.
regards
Hi mate,
All info you need is in the stickies and /or using search function. You need to unlock cid and flash custom rom. BTW tri-colour screen is called Bootloader.
Ps: there was no reason to open a new thread for that ...
hi
thanx for the reply
I have been reading the stickies but could not find
the specific soultion for my problem. can u send me a link or step by step instruction?
regards
Moved to general as this does not belong in development.
There's no need for a step by step guide, all the information is in the wiki or stickies.
hi
I have runout of options and tried almost all. still no success. I was asked to
read stickies which I did but still no use.
no one seems to be answering the question. haha
anyway I have not given up hope.
regards
Yea!! That's the spirit
I can answer to the card reader: as far as I know it has to be an on board reader, otherwise it masks/hides something with the cardid.
hi
hmmm. so that means cardreader option has gone too. haha.
anyway thanx for letting me know that.
so the only option left for me is too wait for someone to send the original
rom so that I can download it and put on my HTC P3450.
regard
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
captainstu72 said:
I wouldnt hand around for too long waiting for someone to upload the stock firmware, it may never happened to be honest.
Do you know the original operator for the phone? It is possible, at a push, that it may be lurking on a website still, just hard to find. That could possibly yeild a result, hopefully.
If you post, I may have a look - but again, I can't promise anything!
Click to expand...
Click to collapse
What's the damage if he tries all the roms, one after the other ? If there's none, gogagogi might get lucky
His phone is still CID locked. I guess it could potentially be a brick. I think, that or it won't let you flash the rom at all. I forget which - been a while!
gogagogi: Have you tried seeing if you can flash ipl/spl from SD card - never been in the position you're in so just curious.
Hi
yes it is cid locked. I did try to flash few stock roms which I thought similar to the rom I have got
on my device through usb data cable but no luck. after 2% or 3% is says invalid vendor ID. then I tried through micro sd card but same result.
then I tried unbricker rom through usb and micro sd card but same result.
even I tried to change the vendor id through a softerare called xvi32. that is
a hex reader. open the .nbh file and change the vendor id but the result was no good. it said " the file or image has been corrupted"
and I never tried to flash ipl and spl.
regards
can you give the IPL/USPL a go to see what happens? (its a link to it for you)
Also, whats was your opertor, not sure if i missed it.
hi
when I bought it, it was on T-mobile. but it was sim free. thanx for the link.
I will have a look.
regards
t-mobile uk sorry or something else?
hi
it was on T-mobile NL.(netherlands).
I did have a look at the link u sent it to me.
after reading it, I found out that Microsoft ActiveSYnc has to be green first.(connected).
whereas it can not be connected, if the device is stuck on bootloader so this option has gone too.
the only option so far is, either I find out the original rom or if I can find out some matty.exe commands which can help me unlock the CID so that I can put any rom.
matty.exe is working fine so far.
so what do u think?
regards
gogagogi:
I don't appreciate the message you have sent to my personal in box to be honest, You're lucky I am replying to you at all!
When in bootloader does it say RUU at the top right? And does it pick up USB connection? Have you tried to flash via SDCARD the IPL/SPL roms?
I have a job, a daughter, and a live out side of XDA. If I do not reply to a thread, it means I am thinking, have missed it by accident, or am simply just too busy. I do not get paid to be here, I am not a moderator, I am just a member like yourself, I do not expect to get private messages hassling me to reply to a thread.
The Elf isnt even my main device. I use a HTC Hero (Android), and have done for quite a long time now. I look in here simply to help out other people who are still using this device.
Thanks, Stu
well it does say ruu text at the right top corner and it does say usb at the bottom.
as I said it does connect through Matty.exe.
well I did not mean to disturb you. I was just wondering cuz u were replying me before and then just stopped.
so mate you just chill.
ignore any previous questions from me.
regards
OKay, as the ruu is there, you should still be able to flash a from that point - I have done this a fair few times.
Have you tried the IPL/SPL yet?