Related
Hi All
I have performed the reg edit that enables the WM5 GPS App - I also know from threads that it is intended to allow multiple pocket pc applications to use the same GPS. Can someone explain how to use the various settings?
In particular, what is the effect of the different GPS settings on the tab labelled "programs" and that labelled "hardware"? And in what circumstances should one uncheck the "manage GPS automatically box" on the "access" tab?
Many thanks
Chris
WM5 GPS Application
Hi Chris!
I have an O2 XDA Mini S and i am missing the GPS Menue in WM5 and i think it would be helpfull in connecting with my GPS Bluetooth receiver.
It sounds that you know how it is activated so that i can try some changes. Would be nice to hear from you.
Thanks in advance
Carsten
http://forum.xda-developers.com/viewtopic.php?t=36540&highlight=gps
ßeta said:
http://forum.xda-developers.com/viewtopic.php?t=36540&highlight=gps
Click to expand...
Click to collapse
Hello,
I tried your soluce but it doesn't work on my Qtek9100 (Orange SPV M3000). The registry key is changed as shown, but after a soft reset, the "redirect" key reappears and my modifcations are not applied.
Does anyone have an idea ? :roll:
you must make sure that the changes are saved after the registry changes
otherwise as you say nothing happens
Jean,
I had the same thing, couldn't get it to work.
But using PHM regedit and saving the changes it finally did work.
The DWORD “hide” wasn’t in my Qtek.
Cheers
Is anybody able to help with my original question?
Hi All
I have performed the reg edit that enables the WM5 GPS App - I also know from threads that it is intended to allow multiple pocket pc applications to use the same GPS. Can someone explain how to use the various settings?
In particular, what is the effect of the different GPS settings on the tab labelled "programs" and that labelled "hardware"? And in what circumstances should one uncheck the "manage GPS automatically box" on the "access" tab?
Many thanks
Chris
Click to expand...
Click to collapse
lskb: I don't use GPS and don't have one, but I enabled the GPS settings page anyway.
It seems fairly descriptive to me, but I would guess, the Programs page basically deals with programs that have difficulty connecting to certain com ports (ie it's used for com port redirection).
So eg, if TomTom MUST be configured to a GPS receiver on COM2, set your settings in the Programs tab to COM2.
Hardware is the actual "physical" com port the gps receiver is linked to. Again, depends on your bluetooth setup/hardware pairing. But eg if your GPS receiver is connected to COM4, set this to COM4. Baud will typically be dictated by your software/hardware setup.
Access is for apps that don't like sharing the bluetooth/GPS receiver. Leave it as it is, ensure the first two tabs are correct, and if you're having troubles but you're certain they're Tab 1 and 2 are correct, or you know for a fact other people have found it helpful, untick the Access checkbox.
V
Vijay
Thanks for that, but I have a question. When you say hardware, you mean something phyiscally connected to the Wizard or by a bluetooth connection? If you mean the latter, then I am not sure that that is correct as the range of selectable baud rates looks wrong.
Thus, my bluetooth gps is installed on an outgoing com port 6 in the bluetooth settings area. The baud rate specified for my gps is 38400. Am I supposed to set the hardware com port to 6 (despite the fact that it is already set in the bluetooth area)? And if yes, how do I set the baud rate, as 38400 is not capable of selection....
Chris
Jean,
I had the same thing, couldn't get it to work.
But using PHM regedit and saving the changes it finally did work.
The DWORD “hide” wasn’t in my Qtek.
Cheers
Jean,
I had the same thing, couldn't get it to work.
But using PHM regedit and saving the changes it finally did work.
The DWORD “hide” wasn’t in my Qtek.
Cheers
well, i have exactly sam eproblems like Iskb. I set the hardware port to com 6. (Vario and Navilock BT unit). Then, when i am trying to connect to my BT module, there is no chance to establish the connection at this given port. I am forced to choose another one (ie COM7). I thought that the GPS manager would work in some way like GPSgate do, but it seems not to be true
make sure in the original com port area the bt modem is not listed on any port,
after you have enabled the com port in the new gps icon and then selected it in the navigator software, change the new gps icon port back to none, and then you can create a "New Outgoing Port" using the original com ports link.
hope this makes sense to somebody :?:
I don't know where else to post this....I found this while looking for an alternative to the SPV Developers CellTracker app. It's an app called NiceTrack...the screenshots tell the rest of the story:
http://www.nicecuppa.com/nicetrack.asp
Background info: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=1
Screenshots: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=2
Download: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=3 (Version 1.2)
The source code for that app can also be downloaded from the Background Info link.
The SPV Developers CellTracker app (Beta version only, hasn't been updated since December) for PocketPCs is located at the way bottom of the page:
http://www.thelogster.34sp.com/celltracker/
NiceTrack updates the tower changes in real-time whereas CellTracker does not. NiceTrack also shows the dbm signal strength on a cool chart and it also includes a logging function that allows you to rename the cells your phone has connected to while the app is active.
Signal strength chart: http://www.ascendingangels.com/nicecuppa.com/images/nicetrack/main-page.gif
Here are a couple hints based on my experience so far:
1) In order to fully save the renamed/logged cell sites, you must first tap Save next to where you renamed the cell site. Then you must also tap Options/Menu --> Save (extreme lower left) to save all changes since the app was launched.
2) Use Menu --> Exit to completely close the app.
I have tested this for use on my MDA II w/Windows Mobile 2003. I don't know if the app is compatible with WM5 PPCs or regular Windows Mobile smartphones.
Enjoy
Thanks for posting.
This software has been discussed before, and it is great:
http://forum.xda-developers.com/viewtopic.php?t=3347&highlight=nicetrack
However, I believe people are having difficulty converting it to WM5 (when I last checked). But great stuff either way.
V
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Good stuff sharpstuff Wish I had a gps!
V
sharpstuff said:
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Click to expand...
Click to collapse
Sharpstuff, you have an excellent app here. I had to search for a bit to find it but in the end, I'm quite glad to have it . I also like the pun you have for your site...it's quite distinctive since even as a German-American, I know when someone says "cuppa", they normally mean the cup of tea .
Keep up the good work and thanks for taking the time to develop such a great and invaluable app .
oooh.. *bookmark*
Do you have a regular Donate button somewhere? I see the shop, but I'd rather just get X amount straight to you, and not have to be awoken by some crazy delivery guy at 8am for a mug
Thanks for the kind thought...
But, I enjoy doing this stuff, so just click my google ads and I'm happy!
;-)
Got this to work on my 8125, almost... Clicking on 'add' under events causes it to crash with the following error:
NiceTrack.exe
NullReferenceException
Application::Run+0xf
MainForm::Main+0xa
....bummer - so close!
You need to select an event type eg. "Flash backlight" then click "add"..
Needs some validation there.. Plus, the events side of things isn't very useful at the moment, I need to implement some more event types.
Cheers
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Also a Qtek9100, EN - found it on COM9 just fine
What would be really neat would be an event "Show Picture". That way it would be easy to make a make-shift map tracking thing. Simply grab a picture of the map off the internet, plunge a big dot on the map where you got the cell, save as image, and have that image displayed when entering that cell %) GIF files on the storage card, shouldn't take up too much space
Alternatively a full-fledged mapping thing could be developed, but that's a lot more work *nod*
@sharpstuff hey I installed it on my XDA EXEC, but when it scans for com and reaches com9 it just freezes...any ideas?
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
stop being sorry and add that donate button *keeps clicking google ads once a day but hopes google won't start ignoring his IP address for excessive clicking...*
N!co said:
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Click to expand...
Click to collapse
After a soft reset its working fine on COM9. Nice app.!
sharpstuff said:
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
Click to expand...
Click to collapse
So is Release 1.3b a partial fix for WM5 users? I installed it on my MDA II and it detects my modem on COM2 without any problems. Both 1.2 and 1.3 seem to work on WM2003 PPCs.
http://www.nicecuppa.net/
http://www.nicecuppa.com/download/NiceTrack_Release_1_3.zip
TIA
Yep, it's an intermediate release. Basically, it reminds the user on startup to set the Com port in settings
I'm working on v1.4 at present, this has more error checking on the GSM code, and multi-threaded com port detection so the whole app doesn't hang
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
ZeBoxx said:
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
Click to expand...
Click to collapse
I get that messagebox at random even after I closed the app and its not in the list of running programs. Strange...
Ive installed my TomTom and its all working now, I can browse through the map and its all good. BUT! Im not recieving any GPS?
I read through a few posts about how to make it work and there was lengthy talk of downloading things to hijack my phone or something?
I thought TomTom was supposed to be compatible with the MDA Vario? Surely there should just be an option to say, CONNECT!
If anyone can explain the simplest way for it to work I would be very happy, Im using tomtom5.2
Well I just installed my TomTom yesterday and connected succesfully with my BT GPS Reciever.
What you have to do is : Enable your BT through the Soft button on the left, or by going to "Start" then "Settings" then "Connecting Tab", click on Bluetooth icon, check the "Bluetooth Enable" ( my device is in german language, maybe I write wrong translation for the words ) then below hit the devices tab, click on the New to check for any near BT device... When your PPC recognises your GPS, click and hold on it in the list, then choose edit (am not sure about the right word since mine is in german lang.) check the Seriel connect... , save it, then you goes back to BT devices list, now below hit the "COM-connects" now you see in a list two lines, choose the first one ( should begin with the word "New..." then choose COM 6 for your BT GPS, save all this... Go to your TomTom and start it, there you have to go to GPS settings and choose the same COM, in our case it is "COM 6", that's it... TomTom should now recognises your GPS.
I hope this helps.
Thanks, I think Im getting somewhere...
I have went onto
bluetooth
devices
new partnership
but all it is finding is something called HOME-C8P8OHXESF ?
When I try and hold down on this and edit it has a section that says
Select services to use from this device
But there is no options to click on ?
Well, the device name that your wizard found doesn't look like a gps, but who knows, maybe this is it's modell's name.
Well I found this tutorial from the TomTom sit itself abou how to configure your GPS to work in any PPC that runs WM5 :
http://www.tomtom.com/support/solution.php?GID=3&PID=188&SID=196&CID=223&Language=1&FID=4806
I hope this helps.
Hello,
I'm new here (so please don't shoot me, i'm quite a rookie) and I've been doing a lot of search-work, unfortunately without result yet.
I'm trying to modify the registry for automatic WiFi "on" when the Hermes 200
is starting up after a power down.
Is there any possibility by modifying the registry or do I have to go deeper (dll, ROM etc?). I allready tried changing some settings in the registry without any result.
Some information:
PPC: HTC TyTn (Hermes 200)
OS: WM 5.0
ROM: 2.11.254.1
I would be very gratefull if anyone can point me in the right direction!
i'd like to know this as well, would b prtty nice to have.
use this: http://www.vijay555.com/?Releases:VJVolubilis and put a shortcut with wifion option in \windows\startup.
cheers,
dan
Brilliant
This works!
Notice that you'll have to edit your command line like this:
\vjvolubilis.exe" -wifion
Many thanks, this was what I'm looking for!
Well, now we have succeeded in turning on Wifi the next issue to overcome is: Automatic connection to a preffered Wifi Access point. But how?
I suggest the tiny program vijay555 wrote does dynamicly change some registry settings (binary strings) to invoke the desired actions. Or do I think too easy?
Would it be possible to auto-connect to a preffered AP?
Hi IT people,
Handy Sniffer v2.0 has been released! It is cardinally altered.
11 protocol parsers are included and now anybody can develop new packet analyzers (.dll).
Unregistered version has a little restrictions but has no trial period.
You can find the program and module sample on our site.
http://winm-soft.atspace.com
Good Luck!
Great Release
Congratulations Alex, you managed to make cellular trafic capture, it's great news! Sorry that i didn't replyed to you about 1.6 but I had some personal problems that time. Anyway when we might expect WM5/6 version?
HS2 is specially designed for WM2003, WM5, WM6 and maybe smartphones (not tested). If there are some artifacts, ect. write me about it. I have WM5 and WM6 devices and HS2 and EDh work well. Play it! It is very great If anybody makes some additional protocol parser. Any ideas? Maybe some Instant Messenger protocol?
One more sample module
This is a sample module that can process each packet captured by sniffer. It replaces the main program module ("modules\hs_ether.dll") and calculates some Rx statistics. Maybe its source can be interested for somebody.
The link not work, now!
I clicked the previous link and all is ok. Copy is here.
Greetings AlexB,
I downloaded your program which sounds great. I installed the SDK certs and tried to get hsniffer running but it fails with an error message:
"Cannot activate the driver!" and then quits.
I'm using a HTC Kaiser with the latest official WM6 ROM from HTC.
If I start the program a second time, it starts without this error and if I click File->Tools->Adapters I get my adapters listed. Trying to start a capture generates the following error message: "Cannot get adapters list!"
Any hints? Did I miss something?
Hi c0rnholio,
I do not know why on some devices the sniffer cannot load the driver module (Windows\hsdriver.dll). The error 2 happens (ActivateDeviceEx, GetLastError, ERROR_FILE_NOT_FOUND) and next you see "Cannot activate the driver!". After this message the program works (you can open sample files) but cannot perform sniffing functions those need driver functionality. I think after this message the main window was behind and after next run you simply bring program window to top.
If anybody knows what causes such driver loading error I will be grateful for help. The program and driver are signed with SDK privileged certificate and it unfortunately does not help... **** happens.
Fixed it. The problem was that a GPRS connection was already established. After closing the existing connection the driver could be loaded and everything is working fine.
It is VERY strange! OK, if anybody ask me why HS does not work I'll say ask c0rnholio how need to do...
Hi,
i'm trying the new Handy sniffer into my TouchHD (Blackstone) but i can only get ARP packets (which are broadcasted). I also installed sdkcert as site advice, but nothing changes.
Alex, can you write down a list of devices which can capture in promiscuous mode?
In particular, how about Trinity and Blackstone?
Thanks!
sorry for my ignorance but what is the purpose of this? can i connect using gprs for free?
No, it's not for that purpose.
Handy Sniffer "Sniffs" (listen to) the traffic into a network. If working in "promiscuous mode" it can track down (and show to user) all the traffic (data in form of TCP packets) inside that network.
What's is supposed to?
There are many uses for this kind of tool, some legal and some ... "not legit".
While "sniffing" traffic of a given network, you can detect if someone is doing a unrightful use of the network, if an intrusion is being made, but also you can see passwords and other sensible data (like personal data).
It's like having a big hear cabable of listening network traffic. By itself, it can do nothing. It's up to the user to be capable of understanding packets of captured traffic.
So, forget a "stole the passwords" button. You'll not find it
woring with the HD2?
Hi, I have the HTC HD2, and I want to know if it was working with my phone?
I have actualy tried it, but the result was not good... (I only get ARP...).
thanks for any help
good for you guys, with my the HTC Kaiser I don't get anything...how do you do/set up the program
Thanks,
DOMy