Hi there,
I have not read the complete forum so I don't know if this has been discussed already, but I am stuck with this wierd problem.
I used to run 2.0.64.wwe on my T-Mobile MDA and this worked fine in combination with my carkit.
Because of some GPS bluetooth problems I upgraded to 2.01a.64.wwe.
When the phone is in the carkit, I can hear incoming sounds, I can recorde voicenotes (so the mic connection works), but when answering a phone call, the mic is muted.
I have tried with Mic ACG on and off, but there is no noticable difference in these situations.
Anyone got a clue?
Thanx,
Patrick.
Related
For some reason connecting any wired headset, even the original one does not enable the microphone on the headset. The mic on the phone is still active, so I put the phone in my pocket and no one can hear me..Can't seem to find any posts or info on the topic. Anybody have any ideas?
Thanks
Im a bit late but I have a similar problem: Wehn I pick up the phone by pressing the button on the headset the micro is not on. However when I dis- and reconnect the headset it suddenly does work. I use Farias final crossbow rom. What can be done to fix this problem?
Hi All,
Finally recieved my ATOM EXEC and must say I am impressed with this product, however I am wanting to know if anyone has tried to make or recieve any calls without using the Bluetooth Headset, or the wired headset. My problem is, that People can hear me but I cannot hear anyone through the phones internal speaker. However it will work on all forms of hands free. Can someone with an Atom exec, please confirm if they have this problem or not.
yes, the speakerphone on the Atom needs to be louder. At max volume, it's still relatively soft. Hopefully, there's some kind of fix
Not the hands free speaker
Hi thanks for your reply, I actually mean the speaker inside the earpiece when you hold your pda upto your ear, there is no sound whatso ever, and when I do an audio loop back test it does not work at all. How about yours?
yes, i was talking about the earpiece and it's really soft. Although my is working fine though....
for my atom exec, it works fine for phone call. No problem in any call(all in speaker phone and in bluetooth headset). I can hear sound of caller and caller can hear my sound. However, i've found problems when i use bluetooth headset to catch phone. It sounds hissing after i press accept call from bluetooth headset for a second then phone is normally.
My CHT version works fine, no such problem.
sidneysum said:
My CHT version works fine, no such problem.
Click to expand...
Click to collapse
same as me work fine, only hissing sound when i catch phone..... (a little bit problem for me)
Atom Exec LCD still squeals like crazy same as standard Atom anyone else have same problem?
When I press the button on the BT headset to answer incoming call the ringing stops on the caller end and on the cingular 8125 (rom 2.25), but there's a 2-3 second delay before the phone actually connects the call to the BT headset.
On the caller side they have 2-3 seconds of dead airtime, after the ring stops. Because of the connection delay, the caller is already saying hello - hello - hello (etc) thinking the call has been answered.
I've tried 3 different bluetooth headsets (Moto 850, Plantronics 645 & 655, Jabra JX10) and they all experience the same problem.
I've verified it's not associated with the 3 second ring delay issue (posted on XDA) - phone rings almost immediately.
Any thoughts, recommendations, hacks/tweaks will greatly be appreciated. This is becoming more of a problem, as I use my phone mostly for business.
Otherwise the phone has been outstanding.
BT headset delay
I have the same issue with T-mobile MDA and Jabra BT250V. Not only does the delay confuse callers, but they hear the ring tone and buzzing of the vibrator before they hear me... hello...hello...hello. It really sucks.
I have tried a Motorola headset (H350) the delay is shorter but the headset sound quality sucks. I was going to try the Jabra JX10 next and hope for the best.
I've also tried using the "BT on" feature of PocketZenPhone to avoid the delay. Not a satisfactory solution.
Does anyone have a solution for this? Is anyone answering calls on their BT headset and getting a quick connection? Is this just me?????
dratliff said:
When I press the button on the BT headset to answer incoming call the ringing stops on the caller end and on the cingular 8125 (rom 2.25), but there's a 2-3 second delay before the phone actually connects the call to the BT headset.
On the caller side they have 2-3 seconds of dead airtime, after the ring stops. Because of the connection delay, the caller is already saying hello - hello - hello (etc) thinking the call has been answered.
I've tried 3 different bluetooth headsets (Moto 850, Plantronics 645 & 655, Jabra JX10) and they all experience the same problem.
I've verified it's not associated with the 3 second ring delay issue (posted on XDA) - phone rings almost immediately.
Any thoughts, recommendations, hacks/tweaks will greatly be appreciated. This is becoming more of a problem, as I use my phone mostly for business.
Otherwise the phone has been outstanding.
Click to expand...
Click to collapse
i have the moto HT820 stereo bluetooth headset and experience nothing like that, even when running my bluetooth gps reciever... the call is answered as soon as i hit the button... only problem i have is the lagging and skipping music, but i dont listen to music so its not a problem
My H700 delays on both of my Qteks (Wizard and Prophet). It only delays if I close the boom. If I leave the headset with the boom open it picks up right away when I press the side button. With the boom closed when it rings, I find that if I open the boom I have to wait 2-3 seconds for the sound to transfer. If I open the boom and press the button, 2-3 seconds it will hang up on the caller because I guess opening the boom is picking it up already
However, my HT820 stereo headset doesn't have any of those problems. Quick and easy, picks up right away; however there's no boom. My Bluespoon AX5 doesn't delay either.
pdxadmin said:
I have the same issue with T-mobile MDA and Jabra BT250V. Not only does the delay confuse callers, but they hear the ring tone and buzzing of the vibrator before they hear me... hello...hello...hello. It really sucks.
I have tried a Motorola headset (H350) the delay is shorter but the headset sound quality sucks. I was going to try the Jabra JX10 next and hope for the best.
I've also tried using the "BT on" feature of PocketZenPhone to avoid the delay. Not a satisfactory solution.
Does anyone have a solution for this? Is anyone answering calls on their BT headset and getting a quick connection? Is this just me?????
Click to expand...
Click to collapse
I had a bt250, and that delay is a known problem with the bt250,possibly making the problem worse
Hi, guys. I have a problem with my xperia and hands-free bluetooth funcionality (I have tested with several hands-free). In half of a call, I start to hear the voice through the phone, and not through the hands-free, but the bluetooh is turned on, and I'm able to manage the phone through the hands-free (I can see the contacts, start and finish a conversation, etc). Simply the sound is in the phone, not in the hands-free.
I have too the same problem that everybody has (the bluetooh turns off), and I had fix it with BTKeepAlive.CAB, published in this forum (Thanks to the creator)
¿Anyone can help me?
I'm having a similar problem, but with my in-ear bluetooth hands-free.
When making a call, either from the phone or by redialing with the hands-free, the sound ends up in the phone. When answering an incoming call, either with the phone or with the handsfree, sound ends up in phone.
I've tried three different handsfrees (two SonyEricsson and one Invisio), with same result.
The strange thing is, when having an ongoing call, with the sound in the phone as stated above, I can hear a low noice in the handsfree, indicating that it is active. When pressing menu, the only option, regarding handsfree, is "Turn handsfree off".
Is there anyone that has a solution to this?
BUMP
Anyone?
thorell said:
I'm having a similar problem, but with my in-ear bluetooth hands-free.
When making a call, either from the phone or by redialing with the hands-free, the sound ends up in the phone. When answering an incoming call, either with the phone or with the handsfree, sound ends up in phone.
I've tried three different handsfrees (two SonyEricsson and one Invisio), with same result.
The strange thing is, when having an ongoing call, with the sound in the phone as stated above, I can hear a low noice in the handsfree, indicating that it is active. When pressing menu, the only option, regarding handsfree, is "Turn handsfree off".
Is there anyone that has a solution to this?
Click to expand...
Click to collapse
I believe I can aswer this myself after following an instruction in another thread here on XDA, even if the solution sounds a bit strange:
I've made a hardreset, and re-installed every program that I want, everything with Bluetooth turned OFF. After that, I turned BT on and added my handsfree. Now its working super.
hi to everyone, i recently got a new x2 (upgraded from my x1) i'm not a newbie around this forum but i've searched the whole forum and can't find an answer to my little problem.
i've installed cyberon voice dialer and btjetfix (so that i can use voicedialing on my x2) but but my problem is that i press the button on my bt headset and it activates voicedialing but the sound is not routed to my bt hesdset microphone, but to my phone microphone, if i call the name that i want it uses the phone's microfone and the sound is heard on my phone's speaker but the call is routed to my bt headset. that makes it impossible for me to call using my bt headset when my phone is in my pocket. all the above worked very sucsesfully on my x1 but now it's driving me crazy, is there any registry key that i can activate or deactivate to make it work properly?
other than that the phone is quite good i've had no other problems with it so far. thanks to everyone in advance.