hi to everyone, i recently got a new x2 (upgraded from my x1) i'm not a newbie around this forum but i've searched the whole forum and can't find an answer to my little problem.
i've installed cyberon voice dialer and btjetfix (so that i can use voicedialing on my x2) but but my problem is that i press the button on my bt headset and it activates voicedialing but the sound is not routed to my bt hesdset microphone, but to my phone microphone, if i call the name that i want it uses the phone's microfone and the sound is heard on my phone's speaker but the call is routed to my bt headset. that makes it impossible for me to call using my bt headset when my phone is in my pocket. all the above worked very sucsesfully on my x1 but now it's driving me crazy, is there any registry key that i can activate or deactivate to make it work properly?
other than that the phone is quite good i've had no other problems with it so far. thanks to everyone in advance.
Related
I've just got jabra bt800 to match my xda atom. I've paired the earpiece with my atom. It works fine when receiving and making calls. However I really want to know how it can initiate voice dialup program by clicking buttons on my bt headset. I tried different ways even combination of buttons. It didn't work!!!!!! I think there must be some work 2 be done on the registry.
Can someone help me out????
btw, if I hold the call button on my headset, the phone software switches on
I am encountering a problem where after some time (do not know how long exactly) my BT headset seems not to synchronize with my TyTN. So when an incoming call arrives I am unable to answer it using the BT headset. Also, when I try to use Voice dialing it efuses to use my BT headset.
Only when I do a soft reset it works.
any ideas?
I have the same problem with a SonyEricsson HBH-610A.
Some times the bluetooth stops it self and I have to activate it agan.
Today when I tried to install the headset again, it searched forever and then I got the message, "Problem with Internal Bluetooth Hardware" and a OK button??
Only when I do a soft reset it saves the problem.
It actually drives me nuts, because I want to answer calles when the TyTN is in its holster.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
I am using a Plantronics 655 with my TyTN running VC 1.5 with the common registry hack and have similar problems but not exactly the same. I want to be able to initiate voice dialing via the headset but when VC repeats the command it comes through the phone speaker and not the headset which also means my confirmation of the command has to be through the phone rather than the headset. Also, when a call comes in my TyTN speaks the name and number of the calling party through the telephone speaker but only beeps in my headset. To me it should be speaking to me through the headset.
I'm trying to get down to the bottom of this issue so it can be resolved through coordinated pressure on the responsible party(s).
Any help I receive will go to help all BT users of VC on the TyTN.
HI all,
I got a t-mobile Vario II and have a plantronics 655 handsfree. I have searched the forum but found nothing that answers my problem.
I want to be able to answer a call from the phone and when the handsfree is paired the sound to come through the handsfree. I have tried a few handsfree kits but none seem to work and all the calls come through the phone until i pull the handsfree out of my ear hit answer n put it back in. Am i missing something? I want to be able to answer a call from the phone and talk through my handsfree. When i make a phone call however from the phone it works fine and the sound comes through the handsfree like it should.
I read something about a handsfree profile...where is that? i don't have a handsfree profile option on my phone. Is it an add-on. I tried the handsfree with my ericsson phone and when u answer from the phone it asks if i want the audio through the handset or the handsfree..
hellpppppp...its driving me madd lol
I Take it no one knows the answer to this or has created a patch? Does everyone answer there phone from the answer button on the bluetooth handsfree then? ??
What you are trying to do, is contrary to the feature designed into your dialer. When you answer the phone call from the phone instead of the connected headset, you obviously wanted to talk via the phone not the headset so that is where it routes the call. You can get it back to the headset after you answered on your phone by selecting the menu option and selecting "Turn Handsfree On".
similar issue
I have an ATT branded 8525, and a Motorola H550.
I'm using the built in voice dialer, as I really don't feel like shelling out any more money for voice commander, when I'm paying for the spb products I have (pocketplus, mobile shell, and phone suite).
With other phones, I could use the phone (by hand) to dial a number, while wearing the BT headset, and it would automatically put the conversation on the phone.
This doesn't.
Also, when I receive a call, I don't get the ringtones I have selected for specific callers, just a generic beep.
Morgan
That issue is actually unrelated. The issue that arnie_ahu has is trying to do something differently than the phone design. However, your issue is a real issue. Dialing on the phone and pressing call should send the call to the headset if it is connected properly. The ony conclusion I can think of is that it is not connected properly as a headset.
In my experience, this is Bluetooth device specific. When I use my Jawbone, I can answer on the phone and the conversation will be on the Jawbone. However, if I use a Plantronics 320 and answer on the phone, the conversation will be on the phone.
The reason why I answer using the phone instead of using the Bluetooth headset is out of courtesy to the caller. For some reason, when I answer with a Bluetooth device, the caller hears a very loud sound that is reminiscent of a fog horn. I have experienced this with multiple phones and headsets. I am guessing this is related to the Bluetooth handshake.
edited: spelling correction.
It may be (for me) because I am using mp3 ringtones on a mono earpiece.
From what I have found on line, that won't work with WM5, which sucks, because it worked on my old piece of crap nokia 6230.
Why oh why must this be so hard?
Now I have to try and convert the mp3 ringtones I made from full songs to something the phone will use.
Hi,
After a long time i have restarted to use bluetooth headset and i have to travel to work .
Just one question to experts.
During incoming call i hear a ringtone in my bluetooth headset and handset but when i answer the call the conversation works only in the handset. I have to select handsfree mode after i answer the call to talk through the bluetooth headset.
Is there a way to make bluetooth work first, instead of having to transfer the call to the headset ?
Edit :I am using WM6.5 rom and nokia hb 103 bluetooth stereo headset
I thought i found something but i was wrong.
A bump to get some notice
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.