HI all,
I got a t-mobile Vario II and have a plantronics 655 handsfree. I have searched the forum but found nothing that answers my problem.
I want to be able to answer a call from the phone and when the handsfree is paired the sound to come through the handsfree. I have tried a few handsfree kits but none seem to work and all the calls come through the phone until i pull the handsfree out of my ear hit answer n put it back in. Am i missing something? I want to be able to answer a call from the phone and talk through my handsfree. When i make a phone call however from the phone it works fine and the sound comes through the handsfree like it should.
I read something about a handsfree profile...where is that? i don't have a handsfree profile option on my phone. Is it an add-on. I tried the handsfree with my ericsson phone and when u answer from the phone it asks if i want the audio through the handset or the handsfree..
hellpppppp...its driving me madd lol
I Take it no one knows the answer to this or has created a patch? Does everyone answer there phone from the answer button on the bluetooth handsfree then? ??
What you are trying to do, is contrary to the feature designed into your dialer. When you answer the phone call from the phone instead of the connected headset, you obviously wanted to talk via the phone not the headset so that is where it routes the call. You can get it back to the headset after you answered on your phone by selecting the menu option and selecting "Turn Handsfree On".
similar issue
I have an ATT branded 8525, and a Motorola H550.
I'm using the built in voice dialer, as I really don't feel like shelling out any more money for voice commander, when I'm paying for the spb products I have (pocketplus, mobile shell, and phone suite).
With other phones, I could use the phone (by hand) to dial a number, while wearing the BT headset, and it would automatically put the conversation on the phone.
This doesn't.
Also, when I receive a call, I don't get the ringtones I have selected for specific callers, just a generic beep.
Morgan
That issue is actually unrelated. The issue that arnie_ahu has is trying to do something differently than the phone design. However, your issue is a real issue. Dialing on the phone and pressing call should send the call to the headset if it is connected properly. The ony conclusion I can think of is that it is not connected properly as a headset.
In my experience, this is Bluetooth device specific. When I use my Jawbone, I can answer on the phone and the conversation will be on the Jawbone. However, if I use a Plantronics 320 and answer on the phone, the conversation will be on the phone.
The reason why I answer using the phone instead of using the Bluetooth headset is out of courtesy to the caller. For some reason, when I answer with a Bluetooth device, the caller hears a very loud sound that is reminiscent of a fog horn. I have experienced this with multiple phones and headsets. I am guessing this is related to the Bluetooth handshake.
edited: spelling correction.
It may be (for me) because I am using mp3 ringtones on a mono earpiece.
From what I have found on line, that won't work with WM5, which sucks, because it worked on my old piece of crap nokia 6230.
Why oh why must this be so hard?
Now I have to try and convert the mp3 ringtones I made from full songs to something the phone will use.
Related
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Ok, this is going to sound really daft and I know alot of you are going to say, "Whats this guy raving on about??", lol
Ok, here goes.
My wizard is on a phone holder in my lorry, usede for Tomtom.
I have a works mobile, with a bluetooth headset. (Also works).
The headset can only be paired to one phone at a time and although I dont get many calls on either phone it would be nice to work out a way to use one headset on both phones.
So now the question, does anyone know of a way I can basically forward the audio, over BT to the wizard from the works phone, and then have the wizard output that audio, again over BT, to the headset?
I'm not botherd aboout the button control as I can use the phone for answering and hanging up.
Hi All: I have paired the headset fine with my phone and made calls before but I can not switch a call from the handset to the headset while a call is already in progress. Once I end the call, I can pair the headset fine to make a NEW call but I'm having problems switching the call when it is already in progress. I can go to the phone and manually switch it to hands free but I thought that if I powered on the headset while a call was already in progress, that would route the conversation from the handset to the headset. Is that correct or can it not do this without some tweaking? Thanks.
I have the same setup and I can answer the call on the phone, then "open" the H700 and the phone re-directs the call thru the headset within about 2 seconds from opening the headset.
If I'm on the headset, I can press and hold the call button on the H700 and the call goes on hold. I can "close" the headset and then un-hold the phone using the touch screen and resume the call on the 8525.
Now I believe that the standard bluetooth stack is crap, and I have had many instances where the phone just stops linking the Bluetooth. I can usually restore the link just by using the comm manager to turn off the bluetooth radio, then turning it back On. I have even done this during a call and it worked.
I have always had solid, loud audio with the H700, BUT, several callers have mentioned that my voice was often clipping a word every few seconds. I don't know what that's all about.
Do you know whether you need to select any special settings or do anything special in the pairing setup with the phone or headset? I do not know how to have the conversation directed to the headset after turning it on when I am already on the call. It works fine to start a new call or to answer a call directly through the headset but can't join a call in progress. Would appreciate anyone's help. Thanks.
Hi,
So when you have a Bluetooth headset connected it's a fair expectation for calls (audio) to be routed through to it, right?
When making a call this happens as per expect.
However if you ANSWER a call via the handset itself (hard button or slider) then the call is kept local to the handset, it's only if you answer the call via your button on your Bluetooth headset that the call is routed to there.
Now you can once in the call select the "Handsfree On" from the menu to transfer it to the headset once you've realised your mistake, but surely this is a bit of a pain.. no?
I for one will most of the time physically pick up the handset and take a look who is calling before answering it (unless driving etc), so would like to just press the answer button and away I do.
Ideas anyone?
(Thanks!)
SimonW500 said:
Hi,
So when you have a Bluetooth headset connected it's a fair expectation for calls (audio) to be routed through to it, right?
When making a call this happens as per expect.
However if you ANSWER a call via the handset itself (hard button or slider) then the call is kept local to the handset, it's only if you answer the call via your button on your Bluetooth headset that the call is routed to there.
Now you can once in the call select the "Handsfree On" from the menu to transfer it to the headset once you've realised your mistake, but surely this is a bit of a pain.. no?
I for one will most of the time physically pick up the handset and take a look who is calling before answering it (unless driving etc), so would like to just press the answer button and away I do.
Ideas anyone?
(Thanks!)
Click to expand...
Click to collapse
I have the same on my iPhone using my In-car bluetooth.
If I answer using the bluetooth answer button it goes thru the car speakers. If I use the handset answer button, it uses the iPhone itself, though I can then select to change it to the bluetooth from the iPhone.
I haven't received my Brodit cradle for my HD2 yet, so I've not set it up in the car yet, but I'm expecting the same arrangement I guess.
greatcapp said:
I have the same on my iPhone using my In-car bluetooth.
If I answer using the bluetooth answer button it goes thru the car speakers. If I use the handset answer button, it uses the iPhone itself, though I can then select to change it to the bluetooth from the iPhone.
I haven't received my Brodit cradle for my HD2 yet, so I've not set it up in the car yet, but I'm expecting the same arrangement I guess.
Click to expand...
Click to collapse
Hmm, I guess it's a case of personal preference - while you and I seem to agree I guess other may like the way it is. The answer is therefore a way to CONFIGURE this behaviour - anyone know if this is possible?
Same thing happens on my Topaz... didn't happen in my Omnia though.
I would like to know a way to alter it as well.
Has anyone tried the Car Kit Mode bluetooth option on the HD2 in the Sense UI 'Settings' tab then 'Other' at the bottom of the list, where you can tick or untick the box for autoconnect? I haven't but would like to know if it works for you.
SimonW500 said:
So when you have a Bluetooth headset connected it's a fair expectation for calls (audio) to be routed through to it, right?
(...)
However if you ANSWER a call via the handset itself (hard button or slider) then the call is kept local to the handset, it's only if you answer the call via your button on your Bluetooth headset that the call is routed to there.
(...)
this is a bit of a pain.. no?
Click to expand...
Click to collapse
Not really. A carkit is also a bluetooth headset. When I'm in the car and not driving, I can always choose to answer with the carkit - then everyone in the car can join in the conversation - or answer it on the device, which I prefer when my wife is driving and the kids are in the back. Even though I've made the mistake of using the slider when I really wanted the call on the carkit, I find having the choice a pretty good deal actually.
And besides, when using a headset, who's gonna take the phone out of their pocket to answer the call when all you need do is touch your headset - or better still set it to auto answer on headset calls. And if you really *need* to know who is calling first, why not install MSVC to have the phone tell you who is calling? Seriously, what's the point in using a headset if you're gonna take the phone out of your pocket anyway?
With my G1, when I'd answer a call using the phone itself (either the hardware button or the on-screen button), the audio would be routed to the bluetooth headset automatically (when it was connected).
With the Aria, when I answer a call using the on-screen buttons on the phone, it routes the audio to the phone. Then I have to hit menu and select bluetooth quickly, or the caller hangs up because they don't hear me. This is very inconvenient when I'm driving, and negates the purpose of having the bluetooth headset in the first place.
Yes, the obvious solution is to answer calls using the button on the headset, but I can't train myself to do that. And like I said, when it's connected to bluetooth, it should route audio to the headset by default anyway.
Anyone know a solution to this?
Nobody sees this as an issue?
Sent from my HTC Liberty using XDA App
This was happening too me... It was because I was answering the call on the phone and not the bluetooth... Answering with the bluetooth solved the problem.
Sent from my Liberty using XDA App
Seems pretty straightforward. Answer with phone, audio is on phone. Answer with BT, audio is on BT. Exactly what I want when I answer in my car since BT goes over car speakers.
Ok, I'm glad YOU like it, but I don't. If my headset is connected, I want audio to go to the headset. Else, I wouldn't bother putting it on my ear and connecting it to my phone.
So, does anyone know if there is a way to change it?
aaron8301 said:
Ok, I'm glad YOU like it, but I don't. If my headset is connected, I want audio to go to the headset. Else, I wouldn't bother putting it on my ear and connecting it to my phone.
So, does anyone know if there is a way to change it?
Click to expand...
Click to collapse
I don't think there is a way to change it...
You don't have a button on your headset to answer the call? I would think touching a button near you eary would be just as easy or easier than sliding your finger across your phone in the appropriate spot.
In California it is illegal to have the phone in your hand at all while driving. Even to answer the phone. Perhaps that is why Android does this.
I DO have a button on my headset. My phone sits in a holder in my van, pointing at me. When it rings, I look to see who's calling and instictively push the answer button on the phone, as that's what I'm used to doing when I'm NOT driving. THEN, I have to open the menu, and and find the bluetooth option while driving. Bluetooth is supposed to make driving safer, not more cumbersome.
As I said, if I have the bluetooth connected, why wouldn't I want audio routed to it? I don't put the thing on my ear just to look good! LOL
I agree with OP. I thought this was a bug in the ROM. Every other phone I have used has this convention - when bluetooth is connected, audio gets routed through the headset - in and out. At least, there should be an option to change the default behaviour in Android/Aria. If I am holding the phone in my hands, I intuitively answer the call on the phone and annoyingly the calls doesn't get routed to headset Or, I am driving and before I start a conversation I want to see if it's worth risking a conversation while driving (even with headset). Again, phone is in my hand and I answer the call - bluetooth doesn't get audio.