Related
Both my colleague and I use XDA2s and we work in the same office. Today, both of us have had incoming calls, while the unit is in its cradle. I took mine out of the cradle, checked who was calling and hit the green button. The call was answered (according to the display) but I could hear nothing. My colleague had exactly the same happen to him, from a different caller. Has anyone else had this, or is there a technique to answering a call when the XDA is in its cradle?
Hello,
I have had no problem answering calls from within the cradle -
I did exactly as you said - picked up the device from the cradle, but I pressed the "answer" button on the screen, all works fine for me.
Cheers
I have answered lots of times the same way with no problems, I've even put the unit on speakerphone... Very handy when cradled...
Did you use a headset before?
The following happend for me once:
I use the headset for listening music. Phone is ringing. I unplug the headset, because I have a poor quality Hama one, and in a loudy bus, the internal speaker of the PDA is better.
But I hear nothing. The only way to take a phone call, with the headset.
I think the PDA's headset connector switch was wrong. After I plug and unplug the headset many times, my wallaby worked. (The PDA felt the headset plugged, so switch off the speaker but the headset wasn't pluged. Soft reset did not help)
This is my story
Rayan said:
I have answered lots of times the same way with no problems, I've even put the unit on speakerphone... Very handy when cradled...
Click to expand...
Click to collapse
Same thing with me, I answer lots of calls using the speakerphone while imate is on cridle... I have no problems at all.
GoldenSands said:
Same thing with me, I answer lots of calls using the speakerphone while imate is on cridle... I have no problems at all.
Click to expand...
Click to collapse
There is a setting, to automatically switch on speakerphone when PDA in the cardle?
Thanks!
Thanks, everyone, for the feedback. Neither of us had used headphones, but we both have BT headsets, which we had used that morning - one's a Jabra BT200 and the other is a Bluetrek G2. I don't know whether that is relevant or not.
If anyone out there uses a BT headset and can tell me how they select a number from contacts and ring it so that the headset works - I'd like to know! Mine only seems to work if initiate the call from the headset.
(off topic, sorry) is there any way of getting the phone to answer calls/dial calls in hands free mode? or creating a profile that does so (ie when i am in car and xda is in a (non handsfree) cradle.
Re: Thanks!
andyb said:
Thanks, everyone, for the feedback. Neither of us had used headphones, but we both have BT headsets, which we had used that morning - one's a Jabra BT200 and the other is a Bluetrek G2. I don't know whether that is relevant or not.
If anyone out there uses a BT headset and can tell me how they select a number from contacts and ring it so that the headset works - I'd like to know! Mine only seems to work if initiate the call from the headset.
Click to expand...
Click to collapse
have you tried turning off bluetooth headset from the today screen, that may cure your problem.
Sallala said:
There is a setting, to automatically switch on speakerphone when PDA in the cardle?
Click to expand...
Click to collapse
I do not know if this feature is availble. I did a little search on my imate but did not find such a feature! but will be nice to have it!
The only option available is to asnwer received calls after certain rings!
it would be worth cheching how old the rom version is on your xda2 as there is an issue with the very early versions of the rom (1.03.00) for example. In this version nither the cell line or the gprs cant be connected while the XDA2 is in its cradle. current version should be 1.60.00.
hope this helps
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Hi all,
I have Qtek s100 since exactly 2 years. I am very happy and even after relasing so many HTC PDA phones after that, I really did not think of changing my phone. Now I see P3600 as probable candidate to replace my S100. But in addition to size and processor, I would also be looking at some key features as justification to change. I am not going to use 3G or 2MP camera. so, lets narrow down to Free/very cheap phone function on this phone.
- anybody tried to install Skype client to make audio calls on wifi connection?
- Also anybody checked function of SIP voip client like SJPhone again using wifi?
If these features are going to have problem with.. I would still stay back with S100 happily.
AS
Skype works fine on it and I run VoIPSurfer for SIP without any problems!
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
This is only available on the Eten X500. I finally decided to get this instead of the Trinity coz I dun use the 3G and the GPS is a lot better on the X500.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is a limitation in Skype. Try using a headset. Not BT though, since the processor can't handle both Skype and BT headset at the same time..
With my LOOX 720, we also have a "large" speaker (badly positioned even if you wanted to ignore that it is a loudspeaker and put it in your ear) and a small "phone" speaker (placed correctly where you would put your ear), although FSC never released any VoIP app for the device (and LOOX is not a phone).
Skype (and other VoIP apps) worked as you say. Audio was coming out of the main speaker, plus they (Skype) ignored our requests to use the correct speaker (or didn't know what to do about it).
Then some guys noticed that the small speaker was ALWAYS outputing audio (in apps/games etc.), but since it is a small phone speaker, you have to put your ear on to hear it. Also this gives more "depth" in 720 audio (since the tiny speaker does its part). Anyway, that was an interesting discovery because it led to research that gave something more important:
A simple registry entry could shut-off the main speaker while keeping the phone speaker working! No need for soft reset or anything! Some even made a little program for this (which also keeps different volume levels for when on and off since eg. I want volume=2 when loudspeaker is on and volume=4 when only ear speaker is on). Toggle it whenever we want (I have a shortcut in my today screen for it).
So I am thinking... look for something like that in Trinity also? It should even be simpler because I am sure Trinity has pretty clear and distinct volume values for both speakers (since this IS a phone after all).
Maybe a shortcut to a registry key could allow to control the speaker volume... like in the loox. I'll try to search registry... Anyway, this is a known issue for skype, so probably they will be working on that on future releases, maybe it needs customization for every particular model. _http://forum.skype.com/index.php?showtopic=71698
Skype and Bluetooth
I use a stereo BT headset and it works great (iTech clip S38). I used another program to toggle, but battery life went to a couple of hours, even when not in use. If you Skype a lot, or even once on an international trip, the cost is well justified.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is possible now with the last final (not beta) version of Skype (2.2.20 or something like that).
The problem is, this final version doesn't work for all phones. You can see the list of supported devices on Skype download page.
The Trinity is not supported on this final version. You can only use chat function, and when you place a voice call, the application automatically shut down.
That's why we keep running the previous beta versions, which work fine, but the sound come from the back speaker
I tried this final version on my wizard, and I confirm that the sound does come from the ear-piece, for the first time in skype history. But strangely enough, this 'new' skype is only compatible with 'old' phones...
The text found below was sent to Skype by me today
Dear Skype,
#1 please sent me a list of supported Pocket PC’s that work with skype and with a Bluetooth A2dp Headset.
The one I have now can be found at: http://www.jabra.com/Sites/Jabra/NA-US/products/Pages/JabraBT8040.aspx and I works really well for windows media mobile.
#2 I currently have the following device which does not work with Skype for the Pocket PC with an A2dp headset. I am very upset about this; I really want to use your skype out service, but cant.
My Device Information: Unlocked
HTC P3600, Trinity
ROM version: 1.23.405.2
ROM date: 03/11/07
Radio Version 1.38.00.11
Protocol Version: 32.71.7020.12h
ExtROM Version: 1.23.405.103
I have installed the following versions of Skype for PPC
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.2.0.18-Beta.cab
kypeForPocketPC-2.2.0.20-Beta.exe
SkypeForPocketPCNew.CAB
The only one that works is the SkypeForPocketPC-2.2.0.18-Beta.cab it works perfectly for the HTC P3600, Trinity however, "only" when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
the SkypeForPocketPC-2.2.0.18-Beta.cab, I feel, does not work with any A2DP Bluetooth headset.
I have tried the following A2DP Bluetooth headsets
JabraBt8040
Link: same as above
Plantronics Voyager 855 Stereo Bluetooth Headset
Lubix UBHS-NC1 Stereo Bluetooth Headset
I think something goes wrong when the Bluetooth stack tries transfer the Skype audio to the Bluetooth headsets it gets all messed up with lots of echoes and sound disconnects and, latency and so on. However playing any multimedia files on the phone work perfectly through my A2DP Bluetooth headset.
Like a said SkypeForPocketPC-2.2.0.18-Beta.cab works perfectly only when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
I have also tried to use a whole bunch of 3rd party applications that redirected the sound to my older mono headsets. I tried three of them, and that did not work either. It’s something when the speaker sound gets transferd to any BT device.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/welcome/cart.php?target=product&product_id=1128&category_id=40
I read that It works well with Skype, and the sound is sent to the phones earpiece after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache:cwIdCCuH2LEJ:www.etenblog.com/2007/11/13/getting-skype-to-work-as-it-should/+skype+Switch+program&hl=en&ct=clnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Update: 02/16/08
I Just got an ETEN x800 and istalled the Skype Switch and took skype for a test run ,, ya,ya, the sound gets redirected to the earpiece,,, ya, but it sonds like sh_t also..
Someone out there has to be able to Hack this mess.
DTMF ,Fring, PPC Skype, And A2DP.
For the Skype sound problem not going through the BT headset someone on this site suggested using fring which is a fantastic idea, however it’s always something... with fring you can place a Skype out call but during the call you can’t navigate company’s phone menu during the call like, “press 1 for billing” “press 2 for sales”. There isn’t even a dial pad. When I contacted there support department I got this:
Hello,
Thank you for contacting our support team.
Currently, it is not available to dial DTMF sounds on fring, this should be implemented in future versions. You can stay up to date on new releases from our blog http://www.fring.com/blog/
In other words, I’m not holding my breath.
Is there a way to transmit a DTMF signal to the input of a Bluetooth A2DP headset? I don’t mean literally, just a sound redirect, in other words trick it into thinking it’s me making the DTMF sound.
I can’t find anything on the net except for Dial-a-matic, which will not work. I also took a look at Pocket Dialer v1.03 but there is no way to redirect sound. I also thought that maybe Kai’s ContactDialer would work but I don’t think it does, or I don’t understand how to use it and get it to work.
I also wonder if all of these problems are salved on WM6 I was looking at upgrading to the new HTC P3470 but the processor is slower than the p3600.
God,, do I want to get rid of that stupid weird mini HTC usb headset, ridicules for a $700 phone.
I wouldn’t need to go through all this if Skype would just finally fix their PPC version to work with a Bluetooth headset.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/...category_id=40
I read that IT works well with Skype, and the sound is sent to the phones speakers after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache...lnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Any ideas what could be causing this or more importantly how to fix it?? Thanks! the headset is a aliph jawbone
Did you try using a different headset? From my experiences, even the same brand of headsets can have different voice quality depending on the model.
it is defiantly not the headset. This brand is the BEST ONE on the market. I just reinstalled my phone and have the same problem but i refuse to believe it is the headset. I am going to try it on a different phone tonight.
it could be the jawbone.. and no its not the BEST ONE on the market as u put it.. try another BT and see if u hear the sound.. if u dont then guess what its your BEST ONE jawbone.. but if u do hear the sound its your bluetooth so try updating the radio
i tried the jawbone with another phone and it works on that. So it IS the wizard. And yes it is the best, unless you happen to have a recommendation for another one because it looks like i might be in the market for a new one. Any idea what i could update my radio to? I just updated to molski.biz's newest rom so i have
ROM: 3.3.0.0
IPL: not included
SPL: not included
Radio: 1.19.11
AKU: AKU3.3
i really want to get this thing going this headset is immaculate.
okay i updated the radio rom to 2.69 and it is STILL happening. I have found one other report of this happening with a wizard on the web somewhere and there was no solution on there. Is it my wizard? Other bluetooth things work fine (my GPS works perfectly) And once connected This one works gine also. it is just this initial loud buzzing noise.
It doesn't even happen if i pick it up form the phone then there is noise.
it only seems to happen when i hit the "call accept" button on the side of my bluetooth headset.
i remember my jabra 250v not working w/ my samsung t809 but other ear peices would.. however, my buddies jawbone works with my 8525.. i recommend taking the ear peice to cingular store and have them try to pair it with one of thier phones.. either a 8125 or 8525 or even 3125 and see if it works without any issues..
i think i am going to do that on friday. i have like another 20days before i have to return it. Thank you for your help. This is so lame i really REALLY love the headset :-/
I use a Motorola Handsfree BT kit in my car and with my 8125 callers hear the same thing. It's not as loud if I hit the answer button on my phone vs. the Motorola remote answer button.
It was a lot worst before I flashed my phone with WM6. Seems better now.
My theory is that it's feedback from the phone's mic with my set but if you are using a headset that wouldn't be the case.
My callers will have to put up with it.
Scott
sounds like the exact same problem
so lame. i wonder if it is hardware defect.
I have an MDA with a jawbone as well and my callers say they hear the same loud buzz!
Okay so it is probably a problem with the phone it self, i bet it is how sensitive the mic is. The Jawbone and it's very sensitive mic and a bluetooth car one that also probably has a very sensitive mic both have the issue. I wonder if theres any solution to this.
Try turning off the vibrate option on the phone- that solved this exact same problem for me...
can anyone verify that? i stupidly returned my jawbone yesterday before i saw it cause i had given up hope but i'd gladly by a new one if that was true =) (headset > vibration imo) Thanks!
I have a Plantronics 640 and disabling vibrate solves the problem for me.
So. Lame. Oh well. looks like i need to rebuy my headset. Doh. Thanks all for your input. Someone should add htis to a wiki/faq as it is a very cruddy problem.
Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?