minimising Tom Tom - 8125, K-JAM, P4300, MDA Vario General

Can TT5 be minimised so it is in the background all the time or do you always have to exit the application?

well i have just tried, and you can press the txt button and it will take you out but when you close it, it goes back to tomtom. So that would be a NO

lochindaal said:
Can TT5 be minimised so it is in the background all the time or do you always have to exit the application?
Click to expand...
Click to collapse
The problem is not if TT5 (or TT6) can be minimised, it can, but how. A solution is using one or more utilities to map a hardware buttons to the required functions.
In my case (but it is only a sample) I have AE Button Plus (http://ae.inc.ru/aebplus.php) and WisBar Advance (http://www.lakeridgesoftware.com/). I mapped a double press of the calendar button to the cascade menu of Wisbar. This menu includes at top an item to show the today screen. Thererefore, when TT runs, the sequence "double press calendar" plus "press down" plus "press enter" has TT minimised in the task bar.

I just press the red end call button when in tomtom and it takes me out to the today screen. The tomtom hands are in the task bar to press when I want to go back into it. I find this works well for me while driving.

soapybible said:
I just press the red end call button when in tomtom and it takes me out to the today screen. The tomtom hands are in the task bar to press when I want to go back into it. I find this works well for me while driving.
Click to expand...
Click to collapse
This solution doesn't work with TT6.
(But saying that, I'm now not sure!!!) :lol:
I'll edit this accordingly.
I do apologise, it does. Hmmm there was something that didn't!!! :lol:

Pressing the "end call" button works on TT6
It works on my MDA vario
Greetz ET

what i do is press the mail button then tap on start---today that minimizes TT6 for me.

Bear in mind, you don't really want TT running in the background constantly, unless you're connected to a power source. The number of times I have accidentally started TomTom as I put my phone in my pocket, only to come back a few hours later and find it's sapped my battery to about 10%, and my phone is roasting hot.
The new version of TomTom starts in about 10 seconds, that's fast enough for me. In fact, I must check if TT6 uses the same "busy loop" programming as TT5, where it constantly uses the processor even when it's doing nothing but display a static screen - I was surprised TomTom sorted out the startup time, I'd be shocked if they'd sorted that out.

I want to keep it running so I get in the habit of turning it on for the speed camera database every time I get in the car.
I have an always on GPS in the car and as long as TT is running each time I walk away and come back it picks up the GPS each time. I know if I have to start TT each time I'll not do it.
Thanks for your help

Didn't anyone read in several post before that by pressing the "end" call button tomtom will minamize? this works perfectly on my mda/qtek WM5.
Greetz ET

Related

Button issue since new O2 ROM

Hi.
Just wondered if anyone else had noticed that since the new O2 ROM upgrade, the green phone button on the edge no longer wakes the device up?
Only a minor gripe but still...
Smiffy.
Er I haven't upgraded the ROM yet and the green button dosn't wake the device on my machine either. Have you got the keylock on now, when prior to upgrade you didn't otherwise no button other than the power button should wake the device by design.
Lordsmiff said:
Hi.
Just wondered if anyone else had noticed that since the new O2 ROM upgrade, the green phone button on the edge no longer wakes the device up?
Only a minor gripe but still...
Smiffy.
Click to expand...
Click to collapse
Funny that, I used to use the light button on the front of my exec to turn it on from standby, but that doesn't work now after latest rom update.
Brett
i have the same problem, so annoying when it's easier just to press the light button to wake it up
maybe it's the new "feature" of the upgrade? or rather not...
***Update***
I have just found a workaround for this problem. You need Spb Pocket Plus 3.1 for this. If you don't already have it, get a trial copy. Once you have it, go under Pocket Plus options, select "Buttons", then press "Feature Options", press "Assign to Buttons", press the "Lock" tab, then select the radio button "Do not lock buttons", and you're homefree! Now all the hardware buttons will wake up the phone, save for the green and red call buttons on the hinge, I wonder why...
this is like the blind leading the blind
go to settings
then buttons
then select LOCK, and select the option "do not lock buttons"
you need to press the button for a split second.
Paul
There ya go - I knew I wasn't imagining it
Cheers for that - even though I feel a bit dumb now because I like to think I'm a pretty advanced user (especially when I've had 15 years working in IT and computers as a consultant ) and it never even occured to me to go looking for the simple solution
I guess I should start looking for a new day job ;-)
Cheers,
Smiffy

Anyone else having trouble with Mortsaver?

Hi again, I've just installed mortSaver primarily for turning off the screen but keeping my lecture video audio still running in the background. I've used this excellent application on all my other phones no problem. However on my M700 the buttons dont seem to work ie.Deactivation using assigned button (button 1) + button 2 absolutely does not work. Even using only button 1 for activation AND deactivation doesnt work (deactivation part). Have to get out of it by the escape sequence (2 presses of the power button within 10secs). However this ends up soft-resetting the unit (proper power off).
Any ideas on what to do or alternative applications to deactivate the screen but keep the video running in the background please?
dabs1 said:
Hi again, I've just installed mortSaver primarily for turning off the screen but keeping my lecture video audio still running in the background. I've used this excellent application on all my other phones no problem. However on my M700 the buttons dont seem to work ie.Deactivation using assigned button (button 1) + button 2 absolutely does not work. Even using only button 1 for activation AND deactivation doesnt work (deactivation part). Have to get out of it by the escape sequence (2 presses of the power button within 10secs). However this ends up soft-resetting the unit (proper power off).
Any ideas on what to do or alternative applications to deactivate the screen but keep the video running in the background please?
Click to expand...
Click to collapse
I used MortSaver on my Jam, which was running WM2003. When I upgraded to a Jamin, I couldn't get it to work anymore. I haven't even tried it with my Trinity because I just assumed that Mortsaver doesn't work properly in WM5. I think it is quite an old version.
Hello,
Mortsaver works fine on my Dopod D810.
Here is a list of my options:
Deactivation:
Screen off timeout: 10
Power off timeout: 10
1st Button: Button 1
2nd Button: None
Show countdown after call: ticked
Other application buttons: unticked
Power
Turn off device: both unticked
This works fine when i'm using mortplayer in the background to listen to music (to unlock press power then voice command button). If this fails you might want to try downloading the latest version from the authors website.

TomTom minimizes everything when device wakes up

Greetings all, Wonder if anyone can help on this one.. we supply mobiles (Orange M600, O2 Orbit and HTC 3300 currently) with our delivery driver software on , this software interfaces with TomTom (currently 6.030) to route drivers to destinations , when the unit goes into suspend/sleep mode (ie the power button is pressed) and then woken up (power pressed again) tomtom minimizes itself and anything else thats running at the time ie our software, anyone know how to stop tomtom from minimizing or how to stop it from taking everything else with it - contacted tomtom support who are (unsurprisingly) a waste of time.
I think tomtom minimises itself by design when you press a softkey or power. for instance whilst navigating if I want to check my email I hit end call and it brings to today screen up.
only thing I can think of trying is in today settings switching off today timeout.
don't think buttons are configurable in tomtom.
hope this helps.
thanx 4 the response - unfortunately this won't sort it - the users will inevitabley press the powerbutton when using the device and this just minimizes everything when power is turned back on - if tomtom isn't running at this point there is no problem.

Lock the screen while using Tomtom

Hello,
I'd like to use my HD with Tomtom on my motorbike (HD in the pocket, navigation instructions over to my Sony bluetooth headset).
Trouble is, of course, that in my pocket, the screen is pressed and Tomtom exits.
Is there a way to launch Tomtom and then lock the screen before putting it in my pocket ?
Thanks !
same problem here.
rahan95 said:
Hello,
I'd like to use my HD with Tomtom on my motorbike (HD in the pocket, navigation instructions over to my Sony bluetooth headset).
Trouble is, of course, that in my pocket, the screen is pressed and Tomtom exits.
Is there a way to launch Tomtom and then lock the screen before putting it in my pocket ?
Thanks !
Click to expand...
Click to collapse
I'm using Navigon on my HD and after locking the screen (press and hold the end key), the Navigon just continues to give driving instructions. Wouldn't that work with TomTom?
locking
Problem I believe is once tomtom looses focus then it stops working. Need to lock it while staying focused on the tomtom screen.
Also if the tomtom looses focus then the phone goes to sleep after period X
C110User said:
I'm using Navigon on my HD and after locking the screen (press and hold the end key), the Navigon just continues to give driving instructions. Wouldn't that work with TomTom?
Click to expand...
Click to collapse
It doesn't : Tomtom keeps working in the background but no instructions coming through =(
There are two ways to lock the device while continue to run TomTom (with the instructions):
1) Press Today button, then lock the device in normal way;
2) Install Gyrator2. With the default settings it will lock your device when inseting stylos back to device.
First solution doesn't work for me : the instructions remain when i press the today button but are cut as soon as i lock the device with a long press on the bottom right button or with the on/off button at the top of the device
Will give a try to gyrator
works perfectly with gyrator2 !
Thanks a lot
Gyrator
Only problem is with gyrator is the device goes to sleep after a little while. I think it is because the unlock function is in the foreground. Tomtom is still active but sleeps after a little while.
Would be good is gyrator then made tomtom the foreground app again once locked.
Just go to the power options and untick the boxes !

Too easy to call by mistake

Only real issue I have with this phone is that it is real easy to dial out accidentally.
Many times when putting the phone back in it's pouch or into my pocket I set the thing ringing.
I tried disabling the green phone button with AE buttonplus but if i'm on the contacts page and touch the green button it still rings.
An body have any idea how to disable the green button other than AE button plus (mentioned in another thread) or have any thoughts on a solution?
Cheers
Toggs
Toggs said:
Only real issue I have with this phone is that it is real easy to dial out accidentally.
Many times when putting the phone back in it's pouch or into my pocket I set the thing ringing.
I tried disabling the green phone button with AE buttonplus but if i'm on the contacts page and touch the green button it still rings.
An body have any idea how to disable the green button other than AE button plus (mentioned in another thread) or have any thoughts on a solution?
Cheers
Toggs
Click to expand...
Click to collapse
Using S2U2 will prevent you from call accidentally, or as we call it: a pocketcall.
Thanks for the reply but the problem with S2U2 is it only works after it's activated by the timeout - before it locks the buttons are still active. But even with general handling of the phone it's just too easy to hit the call button especially when you mean to hit the left softkey.
I'll remember "pocketcall" tho...
Toggs said:
Thanks for the reply but the problem with S2U2 is it only works after it's activated by the timeout - before it locks the buttons are still active. But even with general handling of the phone it's just too easy to hit the call button especially when you mean to hit the left softkey.
I'll remember "pocketcall" tho...
Click to expand...
Click to collapse
I fire up s2u2 by hand before pocketing it and never had any problems
just block the screen by pressing end call for +-3 sec.
If you have enabled the lock then the suggestion by zuadao, does not work! What I do instead is, before I put it in my pocket etc. I press the hard botton at the top to switch it off!
Thanks guy's - these are all OK if you can get into the habit and if you are putting phone away - but, like I said, it's also a problem in general handling of it when it's in use.
For me, the best would be to disable single press call - but i'm struggling to do it.
I do appreciate the answers tho
zuadao said:
just block the screen by pressing end call for +-3 sec.
Click to expand...
Click to collapse
This is what I also do, works a treat. Would be nice to hold it for 1 seconds though instead of 3.
I use gyrator 2. I flip my mobile face down and it will lock automatically and turn off screen. I am lazy to push +- 3 secs end call.....
kuyichi said:
I use gyrator 2. I flip my mobile face down and it will lock automatically and turn off screen. I am lazy to push +- 3 secs end call.....
Click to expand...
Click to collapse
Good tip, I will try that
(my first post)
What i usually do is to press the top on/off button to turn off the screen before putting into my pocket.
Another option is the "auto lock" feature in HD Tweak. It locks your phone each time you turn the screen off, which alleviates having to hold the end key down for a few seconds.
Best oh yes by FAR the best solution is TouchLockPro

Categories

Resources