Is there a keylock app available allowing me to lock all keys while device is on? Is it possible to get the keylocker function from Windows Mobile 5??
helterskelter said:
Is there a keylock app available allowing me to lock all keys while device is on? Is it possible to get the keylocker function from Windows Mobile 5??
Click to expand...
Click to collapse
If you go to Start -> Settings -> System -> Button Lock, you can set it to lock all the buttons except from the power button. That way, when you turn off the screen (leaving the phone on), all the buttons are disabled except the power button.
Be warned though that if you receive a call or a text message, the buttons and screen become active again.
Try this it may be what you are looking for.http://www.pocketpcfreewares.com/en/index.php?soft=1365
So if you can't take the call it turns on your magician and leaves it turned on
futurity said:
So if you can't take the call it turns on your magician and leaves it turned on
Click to expand...
Click to collapse
You'll probably have a time-out set on the Magician anyway to power it down after three minutes or so? If you do that then the keylock will come on at the same time, but yes, for that three minutes the phone's keys and touchscreen will be active if you receive a text/call.
I use mort saver
http://www.pocketgear.com/software_detail.asp?id=14321
I haven't tried DeltaLock which is given with the previous link. I have been using Screenlock for almost a year now on my Jam. It has worked fine and done exactly what it is supposed to do. I use it mainly when I'm playing music and have my phone in my pocket. It saves the battery by shutting off the screen completely and locks all of the keys except the 2 key combo required to activate the screen again. http://www.pocketpcfreewares.com/en/index.php?soft=1300
Matterhorn, just tried Screenlock, it is great for MP3 listening. Thanks.
I have my P3600 since Saturday and I updated it with the latest ROM which included the GPS.
Now I’m having problems with the power settings and functionality. I search all the threads for solutions but no similar problems are described so I post a new thread.
Problem 1:
The power settings are: backlight off after 30 sec. power off after 1 min. (on battery power). After 30 sec. the backlight dims to the lowest setting but the device does not switch off after 1 min (or any time for that matter). This is a huge drain on the battery! I can switch off the device with the power button but once it turns on again (e.g. while receiving an SMS or email) it stays on with the dimmed backlight.
Problem 2:
Using a Bluetooth headset and the media player the player pauses when switched of with the power button. This means just listening to music for around an hour and the battery is completely flat. My previous device was a S200 and that worked fine (could be switched off with the power button).
My guess is that both problems may have simple solutions so I’m asking you all to help me with this.
Thanks in advance,
Stefan
niobium said:
I have my P3600 since Saturday and I updated it with the latest ROM which included the GPS.
Now I’m having problems with the power settings and functionality. I search all the threads for solutions but no similar problems are described so I post a new thread.
Problem 2:
Using a Bluetooth headset and the media player the player pauses when switched of with the power button. This means just listening to music for around an hour and the battery is completely flat. My previous device was a S200 and that worked fine (could be switched off with the power button).
Click to expand...
Click to collapse
Well for problem 2 you haven't searched enough! Anyway you should not use the power button; go to the Windows Media player settings and map the "Toggle screen" function to a hardware button. Then toggle the screen off when you play music.
Regarding your other problem: what software have you installed? Have you got this problem on a freshly upgraded phone?
The solution you propose for problem 2 probably works for other devices but not for the Trinity. You can only assign buttons up, down, left, right and enter and they are needed within the player for obvious functions.
Problem 1 after fresh ROM update but right after that I installed TomTom 6.
I might try a new ROM update and check but rather as last resort...
niobium said:
The solution you propose for problem 2 probably works for other devices but not for the Trinity. You can only assign buttons up, down, left, right and enter and they are needed within the player for obvious functions.
Click to expand...
Click to collapse
It works for the Trinity too. You can also assign other functions to buttons if you keep them pressed. Toggle screen is assigned to "Hold Down" in my case. So if I press down once I decrease the volume, if I keep pressed I toggle the screen.
As to your first problem; i'm having the same problem too...
To narrow it down a bit; my device turns off (to standby) just like it should when i just briefly check the time or something and then put it away with the todayscreen on (so with no aplications running except some today-plugins ofcourse). However; it DOESN'T go back to sleep when the system has given any sort of notification, like a missed call or a received text-message or reminder for a calendar-item.
So my best guess is that it has something to do with the databases notification que (where WM2003/CE 4 had the problem of overflowing this notification que).
It's really anonying the hell out of me too, cause it really drains the battery fast if you don't discover it soon enough...
As for problem 2; map the screen-toggle to pressing the silver 'enter'button.....that workd great for me. By the way; i'm tinking about getting the new wired media remote control HTC is releasing shortly (check this link). I wonder if these buttons will be mappable.....
Edit: just as i posted this, i received a text message and this time it nicely turned back to standby (ie turned of) state when i didn't check it right away. I did however soft-reset last night before going to sleep. So i really do think it must be in the notification que somewhere, as PocketPlus will still clear that everytime i soft reset. Anyone having the same problem exactly as described ?
Well I found my phone again on after I received an SMS and this made me decide to completely reinstall the original ROM (including the GPS).
Step by step I installed all the applications (and tested the device in between: I started some programs and got some notification).
So far the result is that it all works fine now.
The difference might be the different ROM (from smartmobility.nl in stead of europe.htc.com although the version is exactly the same).
For problem 2: I unmapped the button 1 (was speed dial and moved that one to press&hold). In media player I mapped the button to ‘toggle screen’. I still like the S200 for this better because it only kept the media player & Bluetooth alive so that’s the best for preserving the battery…
niobium said:
For problem 2: I unmapped the button 1 (was speed dial and moved that one to press&hold). In media player I mapped the button to ‘toggle screen’. I still like the S200 for this better because it only kept the media player & Bluetooth alive so that’s the best for preserving the battery…
Click to expand...
Click to collapse
Hmmmm....i do the screen-toggle everytime i use it as a musicplayer, and i get considerable good batterylife....
However, i'm not using the BT headset anymore cause the volume was too dim...i'm using the 3,5mm adapterplug now. But batterylife with bluetooth was about the same when i used it.
After all the work yesterday, this morning the problem with not going to standby occured again!
But now I know more. It happened only after I added some sites to my RSS feedreader.
I use pRSSreader from David Andrs (http://pda.jasnapaka.com/prssr/)
Using the 'update settings' with 'automatically connect' the program tries to create a notification on the today screen if new messages arive.
This notification process is the problem. If I switch it of and soft-reset, the device works fine again.
I will mention this problem to David Andrs...
I hope this will help you as well.
Greetings all, Wonder if anyone can help on this one.. we supply mobiles (Orange M600, O2 Orbit and HTC 3300 currently) with our delivery driver software on , this software interfaces with TomTom (currently 6.030) to route drivers to destinations , when the unit goes into suspend/sleep mode (ie the power button is pressed) and then woken up (power pressed again) tomtom minimizes itself and anything else thats running at the time ie our software, anyone know how to stop tomtom from minimizing or how to stop it from taking everything else with it - contacted tomtom support who are (unsurprisingly) a waste of time.
I think tomtom minimises itself by design when you press a softkey or power. for instance whilst navigating if I want to check my email I hit end call and it brings to today screen up.
only thing I can think of trying is in today settings switching off today timeout.
don't think buttons are configurable in tomtom.
hope this helps.
thanx 4 the response - unfortunately this won't sort it - the users will inevitabley press the powerbutton when using the device and this just minimizes everything when power is turned back on - if tomtom isn't running at this point there is no problem.
Hello,
I'd like to use my HD with Tomtom on my motorbike (HD in the pocket, navigation instructions over to my Sony bluetooth headset).
Trouble is, of course, that in my pocket, the screen is pressed and Tomtom exits.
Is there a way to launch Tomtom and then lock the screen before putting it in my pocket ?
Thanks !
same problem here.
rahan95 said:
Hello,
I'd like to use my HD with Tomtom on my motorbike (HD in the pocket, navigation instructions over to my Sony bluetooth headset).
Trouble is, of course, that in my pocket, the screen is pressed and Tomtom exits.
Is there a way to launch Tomtom and then lock the screen before putting it in my pocket ?
Thanks !
Click to expand...
Click to collapse
I'm using Navigon on my HD and after locking the screen (press and hold the end key), the Navigon just continues to give driving instructions. Wouldn't that work with TomTom?
locking
Problem I believe is once tomtom looses focus then it stops working. Need to lock it while staying focused on the tomtom screen.
Also if the tomtom looses focus then the phone goes to sleep after period X
C110User said:
I'm using Navigon on my HD and after locking the screen (press and hold the end key), the Navigon just continues to give driving instructions. Wouldn't that work with TomTom?
Click to expand...
Click to collapse
It doesn't : Tomtom keeps working in the background but no instructions coming through =(
There are two ways to lock the device while continue to run TomTom (with the instructions):
1) Press Today button, then lock the device in normal way;
2) Install Gyrator2. With the default settings it will lock your device when inseting stylos back to device.
First solution doesn't work for me : the instructions remain when i press the today button but are cut as soon as i lock the device with a long press on the bottom right button or with the on/off button at the top of the device
Will give a try to gyrator
works perfectly with gyrator2 !
Thanks a lot
Gyrator
Only problem is with gyrator is the device goes to sleep after a little while. I think it is because the unlock function is in the foreground. Tomtom is still active but sleeps after a little while.
Would be good is gyrator then made tomtom the foreground app again once locked.
Just go to the power options and untick the boxes !
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof