Guys and gals I need some help here .
I was upgrading my Xda11i with pugs latest when my laptop timed out and powered down .
I re started the laptop and re ran MaUpgradeNoid.exe but it wont pick up and run through , the first screen where it looks for info on the device says it cant find any and the bottom section says that it is up grading with , and it leaves that section blank as well. The next screen says that it is not designing the device etc.
What on earth do I do now !!!?
Ive re booted the PDA and got to the screen that says USB at the top and
v1.01 at the bottom .
what next ? have I killed the machine ?? hope not as I love it and use it extensively for work .
Astro1
Sorted it
Its ok Guys Ive got round the problem.
By removing the battery waiting 10 secs then re fit , followed by cold re boot ( on off and the button at the same time ) .
When I re started the PDA it came back to the serial then Usb mode as before , BUT the laptop recognised it ann update ran .
PHEW
Thought I was a gonner .
Now running Pugs update but still with the o2 stuff , Not sure if there is an advantage of not having the o2 stuff ? is the phone now unlocked ?? or is that a whole new story ?
Astro1
You are really lucky. I prefer have a UPS...
Related
Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.
be specific on what you did and the bootloader version u are using and also is ti super CID
PM me
Bricked too ??!
Î may have doine the same, just see serail on top or usb in connected on top.
v1.00 at bottom . . .
Rom update start but stop with an error . .error 113 extended rom update error.
I am not able to unlock thextended rom, it says wrong version . .
Any hints are kindly appreciated !
Dont want to bother You guys with that stuff . .
Greetings !
Volker
Dear friends :
today i see that my unit is crashed and it didn't work , just an still today screen with no response to anything.
I did a soft reset ,but after a soft reset , it just the first time , a crashed today screen .
Then I did a hard reset and on first boot screen with HTC logo appear " No GSM " and when my unit boot , no GSM services is available.
then I go to a ROM upgrade with original ROM and the same rom that installed on my device , but at 12% of process a " Communication Error " has been shown on the PC .
I try to recover the error , but one more time the update process stoped at 12% and now when I Turn my unit on , just a three color screen and nothing else .
please help me that what can I have to do for this problem .
thank you .
Anybody can Help me ?
Are you trying to update on a PC running Vista?
Have you tried AP3?
No I do an Upgrade with windows XP SP2
I didn't try AP3 , because I can't do a Hard SPL ! my unit didn't unlock with HARD SPL softwares .
Many thanks for your answers
Did you try the s/ware form here http://forum.xda-developers.com/showthread.php?t=316846 ?
dear Confucious
Yes I test this software , but it didn't unlock my phone , now my unit didn't have IMEI ! code on device information .
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
Hi!
First ...THANKS @AdamOutler
Trying several ICS Customs Roms , after installing one of the ROM,the device no longer wanted to open !!!
( Before this operation.....flashing more roms ... I left without support usb funtion- very rarely or never connect on USB cable)
Tring to repair into aut. center ....no succes..they said they found traces of oxidation phone - because water.... ???
Ok ! but...can not pay for a repair more than we gave new phone ...isn't true ?
After that after few days tring to connect USB cable on Windows 7....I saw : update driver - Samsung SEC S5PC110 TEST B/D - unrecognized driver ...and windows did not want to install it ! OK ...was the first good sign after almost a week of downtime ....
Knowing the AdamOuter's tutorial....I only tried to revive him ..but each time unsuccessfully !!??
After almost a week since the phone was opened and no battery - today I try again the UnBrickable Resurrector method....and without touching it only after a few seconds....Big surprise !!!, resurrector work and was able to reinstall ( with fastboot - cmd) bootloader.img, boot.img and recovery.img
After that , into recovery I chose to reinstall the initial version 2.3.3 ( luckily mine was on the sdcard ) ...everything went magnificent ! ...but only up here .
tring to reboot devices ....device boot ....but again surprise...and not well .
Now the screen is dark yellow shadows....I do not think anything can be done to repair this defect....and USB connection problem remained the same ( USB not connected !)
( The shadows are now everywhere, the keyboard, the wallpapers on the menu, the bootloader but not in original recovery menu !)
In my opinion I think it might be graphics card fault but may be any....and why USB cable now does not want to connect ....and into ubunto with UnBrickable Resurrector it was able to connect ? ..very very strange !
I have all the driver installed into win 7 even samsung for Odin....trying all methods of connecting ( with USB debugging - on - off) - ....charging only works !
...wait your advice and opinions ! Thanks in advanced ...
Cheers,
surdu_petru
Hi!
Nobody can tell me if it is possible to damage the screen or video card after a ICS custom rom installation ?
If it not possible then I think that those in rep. service changed my screen, because I refused to pay reparation. ( before repair ,I was informed that I have to pay for this , but I refused and they sent me the phone back in a few days without repaired....) .
Now I have it queries....maybe the screen it was bricked after last custom flash ...or those in the service changed my screen - thinking that I will not fix it.
If anyone is willing to try this custom ??? to see about what happens afterwards ...then I'll post this custom rom...but attention you'll brick your device and only solution is AdamsOutler tools ...
surdu_petru said:
Nobody can tell me if it is possible to damage the screen or video card after a ICS custom rom installation ?
If it not possible then I think that those in rep. service changed my screen, because I refused to pay reparation. ( before repair ,I was informed that I have to pay for this , but I refused and they sent me the phone back in a few days without repaired....) .
Now I have it queries....maybe the screen it was bricked after last custom flash ...or those in the service changed my screen - thinking that I will not fix it.
If anyone is willing to try this custom ??? to see about what happens afterwards ...then I'll post this custom rom...but attention you'll brick your device and only solution is AdamsOutler tools ...
Click to expand...
Click to collapse
Lol. Great that your device is working
But, don't let others do it.
Btw you're saying your screen is fixed now?
Sent from my Nexus S using Tapatalk
shockem said:
Lol. Great that your device is working
But, don't let others do it.
Btw you're saying your screen is fixed now?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Hi!
Sorry but I do not understand your question....by the way - now my phone work great , you are right, everything work well without USB connections, and those spots dark yellow !!! ( at least white looks like dark yellow ).
I believe that the screen is not broken, because running Voodoo Screen Test , all colors are impeccable, no shadow , no colors mixed ....
If anyone knows a more complete test program, something to color or graphics...to see exactly what is defective ? ( or maybe a solution to remove this defect ?) - I will be grateful ! Thanks in advanced ....
Cheers,
surdu_petru