Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.
be specific on what you did and the bootloader version u are using and also is ti super CID
PM me
Bricked too ??!
Î may have doine the same, just see serail on top or usb in connected on top.
v1.00 at bottom . . .
Rom update start but stop with an error . .error 113 extended rom update error.
I am not able to unlock thextended rom, it says wrong version . .
Any hints are kindly appreciated !
Dont want to bother You guys with that stuff . .
Greetings !
Volker
Related
Hi all,
please help someone if you can.
Have Regular UK MDA PRO.
Tried to do the UNI_Qtek_WWE_11364_151_10300_Ship ROM Upgrade
But got stuck at the country code part.
Now my Pro is stuck on the T-Mobile Splash Screen - the one listing the Model Versions -
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
It will not progress past this point.
I found out I can access the boot loader screen by resetting with the power light as well but I don't know what of the 3 options I get can help me . . I get these options:
Boot Options:
Enable KITL
Clean Registry Hive
Format Storage
Should I activate some of these? please help - if my Mrs finds out I screwed my new fone I am Dead!
Cheers & please help!
Mummy!!!!!
lr :!:
Trying to keep calm here with my blank screen but can someone help?
many thanks!
lr
I wish I could help (I was at the same ssituation once), but I have a JasJar and your bootloader seems to be different than mine.
But try posting for help on the Universal Upgrades forum. That's where all kinds of rom updates are discussed.
I will mate - thanks for ya help.
I am still stuck and none the wiser for all my research . . . I can get to Bootloader but get stuck therer- whitescreening on clicking the thumbpad button.
is it possible to get some files onto an SD and get bootloader to pick them up from there.
please please help I am desperate over here.
cheers
Great.
I am stuck with a brick.
£350 down the crapper
You could send it to THC Europe at http://www.htceurope.com/ they may charge a small amount to reflash your device
Edit: I think they will cover you if you have a MDA Pro, just try to enter the IMEI at http://www.htceurope.com/Wizard.aspx
Jah, thx mate if it comes to it I will use the link . . .
little rock!
Are you still within your first 28 days of purchase? If so then just take it back to the shop and exchange it for free!
no think i am outside of that now - but i will ring em up and ssee what they offer . . .
it's crap without a fone / pda u know
cheers meat.
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.
Helle everyone! First of all, sorry for my bad english! However some days ago i read that htc have done a wm upgrade for my phone (6.1) i didn't know that it wasn't for gsm version.. when i did thet upgrade i had on the phone the onyx rom and the cid unlocked, with this upgrade the spl came back to the original but the original rom doesn't start the installation. so i have the spl 2.26.0000 and the onyx rom that doesn't start and when i turn on my phone it remain in the display of 3 colors of upgrade.. what i can do now?? i have the warranty cause i bought the on july.. plese help me, how can explain them this fact? i'm in yours hand..
thank you
Jasper
Hi
I think you should try to cid unlock again, if it works you could flash the onyx again, if not there's a lot to read in here http://forum.xda-developers.com/showthread.php?t=406721
Good luck
i've tried a lot of times to unlock the cid but it give me the error: ERROR [200] Invalid update tool
Please get newer update utility
I used the latest version of spl and it's the same.. I tried to dump the original rom and it give me the same error 200.. Further there is no RUU in the display of htc..
Sorry for the english
Nobody can help me??
Hi JesperHTC-Touch !
Do you use windows xp or Vista to sunc yourè phone?
xp, but i have the phone locket to the bootloader and activesync it isn't green..
Hi JasperHTC-Touch!
I have also got that ERROR [200] Invalid update.
I recomend you to install IPL & SPL 310 you can find it her http://forum.xda-developers.com/attachment.php?attachmentid=130771&d=1226977938
http://forum.xda-developers.com/attachment.php?attachmentid=130567&d=1226919217But use this tool to do the upgradehttp://forum.xda-developers.com/attachment.php?attachmentid=101826&stc=1&d=1217022319
Dont be worry i diddent got the color bar either. But be shure to have at least 50% of battery capacity before yoy do the upgrade. Put the file from (310 inside the catalog in 226 /RUU and replace the file RUU_Signed.nbh that you downloded at press theelf-uspl.exe and read carfully what you seen on the screen and dont dissconnect youre phone before you have started up the phone completely. Thats what i did and it works for me. God luck
Kindly MacRoy
I did what you told, but it doesn't work, i'm triyng to upgrade with all the original rom of this phone.. it's impossible i can't unbrick my phone
Another fact it doesn't enetr in ruu-bootloader.. only bootloader
Try to hard-resetting the phone!
just tried and doesn't work.. i spent 350 euro in july for this phone!!
Hi
try the unbricker rom method mentioned in this thread
http://forum.xda-developers.com/showthread.php?t=446242
it is a trial original rom that can be flashed from SD card then after that you can CID unlock again (good Luck)
dowsn't work :'(
i also tried to unlock the spl from microsd but it give me the error: invalid certificate..
Nobody can help me?? i don't want bring it to the guarantee.. sorry for the bad english..
hello all
i have i-mate jasjam its proplem is no gsm
i tried alot for flashing the radio bymany verions but it stoped and when i tried t flashing it by many roms and also the original rom it stoped on the step gsm
and if i flahed it by any rom wihout the radio it completes but with no gsm
i hope to find a resolve to this prop plz to make my phone alife again
thx for u all
This is maybe problem with hardware ! better to you go in service,bcs if you flashed with original rom and radio,he must to work 100%
thz alot for help but i need a solution do it by myself thx
Hi, can you please write down what is on the bootloader screen ?
hi aze2learn thx for trying help me
ok
on the boot loader screen
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
thx alot aze2learn
Well, since you already have hardspl 2.10-Olipro, please make sure you flash WM6 (green welcome screen) or above because WM5 (blue welcome screen) for sure will make the device show 'No GSM' if it writes an old radio version. Try original rom for your device here first : http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
It is recommended to use radio version (GSM) from your carrier. You can also try other radio (if you want to) from here : http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms . Some say 1.47.30.10 is the best in terms of power consumption but maybe not suitable for others (depends on carrier/geography)
Note : Only original ROMs from HTC/carrier have radio. Cooked roms don't include radio.
All the best
ps : Only HardSPLed device will allow flashing extracted radio rom. Stock SPL will stop the device from flashing.
ok man thx alot i will try and i will tell u but tell me how to flashing it by pc or by sd
thx
Try RUU first (flashing through pc using usb cable) but if you're having problem such as error 260 (no connection), you can use sdcard method since you already HardSPL your device
ps: sdcard method only works on FAT32 filesystem and non-SDHC microsd.
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
mony_nana said:
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi,
Extract RUU_inside.exe (use winrar or 7zip) RUU_inside.exe is in the original HTC ROM package ... get the RUU_signed.nbh and put into a new folder.
Then use RUUWrapper from here : http://forum.xda-developers.com/showthread.php?t=298737 and put it in the same folder with RUU_signed.nbh
Boot the device in bootloader mode. In RUUWrapper, tick 2.10 (new bootloader) and is it Hard-SPL. Follow the instruction.
All the best
ps : please check your PM
hi man
its stoped again on 11%
my mind will be pumped and i dont know what to do
i do everything i think
i will be crazy
maybe your battery drained out already? if so, try turn off the phone, charge it for 30 mins and try again.
ps: have you read your PM?
its already full charged
Please don't worry too much. Since your device already HardSPL, your device can still be revive.
i hope it will be aliveagain but how?
i am too tired from searching on the internet about this prop
and i didnt get any resolve for it
i think u have mor experiance than me and u can search more deeper than me
i will be here tmorrow maybe u can find a selution
i am from egypt and u ?
I'm from Malaysia (GMT+8) and please read your private message. I would really love to help but I need extra info such as what OS are you using, what happen before you got into trouble,etc.
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..