Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
Guys and gals I need some help here .
I was upgrading my Xda11i with pugs latest when my laptop timed out and powered down .
I re started the laptop and re ran MaUpgradeNoid.exe but it wont pick up and run through , the first screen where it looks for info on the device says it cant find any and the bottom section says that it is up grading with , and it leaves that section blank as well. The next screen says that it is not designing the device etc.
What on earth do I do now !!!?
Ive re booted the PDA and got to the screen that says USB at the top and
v1.01 at the bottom .
what next ? have I killed the machine ?? hope not as I love it and use it extensively for work .
Astro1
Sorted it
Its ok Guys Ive got round the problem.
By removing the battery waiting 10 secs then re fit , followed by cold re boot ( on off and the button at the same time ) .
When I re started the PDA it came back to the serial then Usb mode as before , BUT the laptop recognised it ann update ran .
PHEW
Thought I was a gonner .
Now running Pugs update but still with the o2 stuff , Not sure if there is an advantage of not having the o2 stuff ? is the phone now unlocked ?? or is that a whole new story ?
Astro1
You are really lucky. I prefer have a UPS...
I attemted to flash my Kjam to WM6 & it went dead. It wont start at all. Kjam Service centre says there is a problem in the mother board and it needs to be replaced for $ 300+........now if flash fails...the ROM must have gone corrupt , what has it to do with the motherboard ?
can anyone throw light on whats the real thing ?
Deven.
take out the battery for hours then re-install it. try to boot in bootloader mode first(3 colors). If it work, it's the time to re-flash the right rom now!
When you start the device up what happens?
Same Problem accured for me!!!!!!!
I installeda new rom and my device didn't power on after that.
What should i do now?
afghahi said:
I installeda new rom and my device didn't power on after that.
What should i do now?
Click to expand...
Click to collapse
Nobody here is providing any details so everything is going to be just a guess. If either of these phones were a G4 and you flashed a rom that tried to update the IPL/SPL then its very likely you have bricked your device. But again, with no information about what rom you were trying to flash, what your IPL/SPL were beforehand, or details about what it means that it won't turn on, everything is just a guess...
Bricked Kjam
its comletely dead.....i had disconnected the battery for a couple of days then connected it but it wont start....i checked the battery using multimeter it is fully charged....neither does it power ON when connected to mains...It doesnt get detected when connected to the USB port..thats obvious since it is not powering up...so cant flash it again.. now m in a fix as to whether to spend another fortune after this sweetheart or keep it in a showcase ....
Deven
( a bricked KJam )
If nothing lights up that looks pretty terminal. :-(
Maybe you could buy a broken Wizard with a working motherboard? Alternatively maybe sell off your mostly working Wizard on this forum to raise money to buy a new device?
Sorry if you can't get it going. :-(
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...
gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)
i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...
you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.
Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.
" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?
yes....choose the hk site
Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.
the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM
Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs
Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks
Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process
HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...
NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.
NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.
xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?
Hi friends I hope you can help me with my problem.
I have in my hands a htc magic 32b was not but I wanted to root
charge the battery as well, I saw a tutorial on how to do this, follow the steps well but did not read well when he says that to reverse the steps and put it back to factory. flashe then a file named sapping.zip and everything went well but the result was me the following errors:
1 - bootloader - error
2 - boot - fail
3 - h-boot fail
4th - radio fail
I think these were the errors
then my HTC'm dead, orange LED lights only when you connect the charger.
and if I press the combination Vol-down the center button and the back button
Blue LED lights up but the screen does not turn on, or the computer recognizes it fasboot mode.
can someone tell me how I can repair my precious android?
thanks in advance and excuse my English but use the translator of google I am from Central America.
Yep .
1. I prove myself HTC is bad phone
2. I thing you downgrade via goldcard then try to put RADIO and SPL and while flashing the RADIO your phone dead right
3. In this point only JTAG can help
3.1. This stupid sapphire cost 30E second hand
3.2. Riff box , JTAG , Olimex- usb tinny and etc cost from 70 to 160E
3.3. In service for JTAG it cost 40 to 60E coz the funny techs there think they are God coz they open the phone ,solder ( some have HTC connector and use them without solder) then click flash flash flash with some open source program some dump files like SPL RADIO RECOVERY and etc and coz of this they wanna grab your money coz in them eyes you are tinny people who beg them to fix you phone
4. In the end what will you chose ? Buy JTAG for 200E all parts and program this stupid Qcom inside by your self , pay some tech 40~60E to resurect it to you or just trow this stupid HTC coz its cost only 30E its your choise.
I'm now pissed off coz i mostly use XPERIA and flashed NAas MiniCM kernel and ROM maybe on 30 and more XPERIA's and newer got this HTC like stupid situation. EWEN SONY make a update service coz when your mess it its can repear it.
I cant imagine how stupid they on HTC is to sell people phone who brick and stop work. EWEN SAMSUNG HAS JIG (310K rezistor) who put them in download mode ... and etc. etc. and etc.
Now I"m same like you whit dead Saphire 32B and I don"t thing its cool to pay 60 box to fix phone who cost 30.
Its from 2009 and we now 2012 no one make way till now to fix this without JTAG and like i see it can't be develop coz when phone go tho state where no USB no fastboot no hboot nothing there no way to soft method to fix this :angel: