Hi all,
I have a little problem with my headset Jabra BT620s.
All works great, even AVRCP and phone part.
But when I am listening music trough Mort player (last version posted on this forum :wink or WMP, the sound "jump" almost every 30 seconds.
(I don't have the "silence" problem at start of tracks.)
My device run at 468mhz. I try 416 or 208mhz... same problem.
I really don't know why the sound goes like that... (my mp3s are 128bits encoded.)
Any help will be appreciated. 8)
Thx.
Jay.
For the moment, no more "jump" with the last version of Mort Player.
Even at 416mhz !!
http://forum.xda-developers.com/viewtopic.php?t=59956
edit: Arrrggh, problem came back... :x :x :x
Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
I have the cingular 8125 and the plantronics 590a wireless headphones but I can not seem to find the cab file I need to enable A2DP. All I keep finding is ROM upgrades. Any help would be much appreciated.
here you go!
Thank you very much. The cab installed fine but I still can not get the phone to play music files over bluetooth. What am I missing here?
128d what ROM are you running? I believe you must have an AKU 2.0 or above ROM for the a2dp hack to work.
Also, did you soft reset your device after the install?
This is the thread that I used to get a2dp working on my Universal and 8125s (Yes I read the whole thing and you should too because nearly every problem is solved)
http://forum.xda-developers.com/viewtopic.php?t=48502&postdays=0&postorder=asc&start=0
Don't skip a reply, read the whole thing and all the pages. There's another cab file with the registry settings on one of those middle pages that saved me a lot of time and frustration. :wink:
My ROM is 2.25.11.1 WWE
Everytime you want to listen to music you have to go to Bluetooth settings and tap-and-hold where it says Plantronics 590, then choose Stereo headset. Very frustrating and I haven't found a better solution for it. I think the guy behind PhoneAlarm is working on a sollution though.
Dmon said:
Everytime you want to listen to music you have to go to Bluetooth settings and tap-and-hold where it says Plantronics 590, then choose Stereo headset. Very frustrating and I haven't found a better solution for it. I think the guy behind PhoneAlarm is working on a sollution though.
Click to expand...
Click to collapse
i dont have that problem with my HT820.. as soon as i turn on the device and bluetooth on my phone and they sync up i can start playing music in stereo... my settings stay
Unless I've missed something fundamental this must be an issue with the 9100. It seems that it switches between two settings, one for talking and one for music. If you watch a movie you also notice that the audio lags for 2-3 seconds. Obviously this does not happen during conversations.
In one thread on the forum they were discussing creating a little program or applet to activate the headset with just the push of a button. Haven't checked their progress lately though...
Dmon said:
Unless I've missed something fundamental this must be an issue with the 9100. It seems that it switches between two settings, one for talking and one for music. If you watch a movie you also notice that the audio lags for 2-3 seconds. Obviously this does not happen during conversations.
In one thread on the forum they were discussing creating a little program or applet to activate the headset with just the push of a button. Haven't checked their progress lately though...
Click to expand...
Click to collapse
interesting.. my ht820 dont switch profiles between music or talking... it still has the notorious skipping problem when playing mp3's.. but that dont bother me, i only got the headset for phone calls.. im going deaf in my young age from to many loud concerts and a phone call in stereo is very helpful to me
Dmon you trick worked. I can now listen to music with my plantronics. The only problem is the buttons on the headset dont function. Have you had any luck with this?
What player are you using? You have to use, as far as I know, WMP or the newest version of Pocket Player (think it's 2.8) if you want to be able to skip songs and pause etc. I use Pocket Player and I think it's the best player around but unfortunately it's not free. The equalizer is a lot better so you can play with the high registry to remove some of the hissing noices.
8125 A2dp CAB
Installed the cabinet file and it works well in terms of getting the audio to the Jabra BT320S. However, when using the stereo wireless function that it enables, it slows everything else on the phone. Takes 6 to 10 seconds to get the system to recognize any command.
Any suggestions as to what might help speed it up?
My skills are not such that I’m comfortable messing with the ROM (2.25.11.1 WWE)
Thanks for all your work.
Giving this a whirl with my 8125 running Molski 2.26.10.2 Final and Jabra 250.
Holy thread resurrection, Batman!
Here, try these cabs instead. This is the 3.3 stack. Install the cert. before you install the patch.
jwzg said:
Holy thread resurrection, Batman!
Here, try these cabs instead. This is the 3.3 stack. Install the cert. before you install the patch.
Click to expand...
Click to collapse
worked like a charm on my 8125
thx man
..?
Aslo for Wizard ??
mazterjay said:
Aslo for Wizard ??
Click to expand...
Click to collapse
Of course!
!!
Yeah,, U'r right,,, just tested it.. But got a minilag in about every 10-12 secs.. Its a lag of a second.. Each time.. Who know how-to fix this ??
ByTheWay.. I am using a Logitech HS210 ( AKA_ Logitech Mobile Stereo Headset..
Controls are working fine..
Hello all
I have bought a sony ericsson hbh ds970 headset and succefully paired it with my Wizard. Everything just peachy so far, sound is great and it plays the sound from MortPlayer and TCMP without problems. But. (there is always a but...)
When I recivie a call when listning to music the phone automatically paused the music and I can take the call with the sound in my headset. Great. But when i´m finished with the call and want to continue listning to music I get silence.
The headset is still paired, but I dont hear anything. I´ve tried to close and restart mortplayer, but that doesnt help. Also tried the BTaudioToggle app which toggles BT on and off but still nothing. The only solution is to softreset. And thats not an option i the long run...
Another thing I dont see any songs or information on the bluethooth headset display, but maybee thats asking to much. Or? Same with callers, I see the number but not the name of the caller.
Thanks and keep them answers flowing
/d
Which BT hack are you using?
I think it's either the BT hack or the headset. With the BT hack linked from my related article ( http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1307&more=1&c=1&tb=1&pb=1 ) the WMP (haven't tested with other players in this respect) music playing resumes at once and automatically with my 590A on my Wizard.
Thanks for your reply.
Downloaded the a2dp_hack.cab file and the WizardA2dphackimport.reg. Dont know how to run the .reg file in the Wizard so I enterd the values manually. I was running some old a2dp file I found somewhere.
Did a test with mortplayer, which I use, fired up played some music thru the BT headset, pressed call button and started a call. The music stoped and I heard the phone. Hung up and returned to MortPlayer, but there was no music. Could see that the song continued to play but there was no sound. I tried to pause and play agian, but that didnt work. Exited Mortplayer and started it again. That worked, sound in BT stereo headset again.
/d
BTW can I get the phone to ring althou I have the headset connected? now it only rings in the headset.
thanks
/d
Hi guys
I know this has probably been asked before and I have searched the forum and read many threads - some of them get very technical!
Basically, what I want to know is, is it possible to have the other sounds the MDA Vario II makes output on bluetooth?
I'm a biker and have a BT equipped Helmet (Nolan N-102). I use TomTom Navigator 6, Windows Media Player and sometimes listen to the radio via 3GPRS internet connection. I'd love to be able to hear all this audio in addition to the mobile phone!
I'm sorry if this is rather 'old' for many of you!
JC
If your helmet has stereo bluetooth (A2DP) than it does so by default.
There is somewhere a tread here about the option to also output all sounds to a mono bluetooth headset. I didn't try that myself.
Look at this thread
http://forum.xda-developers.com/showthread.php?t=278778
I use it and it works great.
Thanks guys
Still struggling with this one but hopefully crack it someday!
Just had a reply from Nolan, the manufacturer of my bluetooth helmet:
'As per your request, please note that our N-Com system does not support the A2DP profile for listening to music via Bluetooth.'
I guess this maybe a reason why I can't get BT comms from the Vario except for phone
If you read this post
http://forum.xda-developers.com/showthread.php?t=278778
It will tel you how to get all sounds to your Bluetooth headset. I use it to listen to music in mono on my headset while walking. I use the Mort Script. It's the bomb.
Hi,
I have a JasJar flashed with the latest qtek rom because it support a2dp.
The problem is that I can pear my bluetooth stereo headphones and hear with all the system sounds (for example the "tick" sound opening the start menu), but when I play any mp3 (using wmp) I can only hear 1 second and then silence. After that I have to connect the BT headphones again but the result is always the same. I installed the a2dp patch (http://forum.xda-developers.com/showthread.php?t=262119) but it does not solve my problem, maybe because it is not a lag issue?!
Another strange behavior is that after using my Jasjar for a bit, a2dp does not work at all anymore...and I have to pair the device again.
Can anyone help me?
Hi alex_time,
The Gurus are still working on this. But in the meantime check this out!
http://forum.xda-developers.com/showthread.php?t=333258
http://forum.xda-developers.com/showthread.php?t=337088
KOR!