Database Users

New A2DP Discovery

Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!

this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..

XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...

Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?

Good one... will try it later

Has anyone tried with Motorola HS 850???

Has anyone tried with Motorola HS 850???

So far, i have not tried it on XDAII... but i think it should work..

Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks

I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?

Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason

i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.

@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo

does this method enable your bluetooth headset to receive calls?

Magician and I-Phono hedaset. I can't do it work!!!. HELP.

Hello,
I want to stream music to my new I-PHONO Bluetake from my QTEK S100
I have read loads of post about it, and seems that it works fine. With little problems but it works.
I have the last ROM 1.13 with the last Radio 1.13. Thanks to http://forum.xda-developers.com/showthread.php?t=273911.
I have installed the stereo bluetooh patch bchs_for_pocket_pc_ozone.armv4.cab
The software recognize as as stereo headset. And on audio tab i swith on the check box to stream audio to headset
I configure the headset as hands free.
And i can not hear the music. The calls sounds perfect.
Please help.

Somebody can help me ???.
Thanks.

you ned to check the box ''stream audio to headset'' and '' automute'' an try wmp

Both are checked . Auto mute and stream music.The Headset is selected on the combobox. The WMP it is running and i can not hear anythig..... .
Any advice ????

Bluetooth Handfree Issue

Hi Everybody,
I am using the X01HT which running with
Rom : 2.05.255.1
Radio Ver. 1.34.00.10
The problem is my friend said that my speech sound very poor (the background sound very strong )
when my phone is connected with the BT Handfree.
Just wanna know how the chase the problem is from my handfree or my phone.
furthermore, Is it possible to check my handfree is running real A2DP (Stereo sound )
my Handfree info: http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050
sorry for my poor english

Your english is fine
This not an area I know much about but the following may be of use:
http://forum.xda-developers.com/showthread.php?p=1152585&highlight=sound+quality#post1152585
HtweakC Link
http://www.fit4cat.de/thread.php?threadid=263
Try using search as there are several posts on this kind of problem.
Mike

You can check A2DP by playing a song that is in stereo. Anything with an obvious sound in the right channel will do, as if A2DP is not working it will only be playing in mono.
Also, the little icon in the taksbar will show a headset with a music note inside of it if A2DP is working.
The sound problems you mention are probably due to the quality of the headset. Try it on another phone or try a different headset on your phone.

I am using the same ROM and radio and my BT works great. (AKU 3.3)
I use both the Nokia HS-12W and a HTC BHS 100.
A2DP will give true stereo in WMP10. Strange I found the Registry still set to mono, so I had to change that for stereo.
The call quality both incomming and outgoing is great with these headsets as well.
The HTC also allows you to use your favourite earphones as well.(3.5mm jack)
Hope this assists.

Thanks
Thanks all first.
Yesterday, I did some stupid test about the voice quality,
I used the recording function in Note to record my own sound near the TV in my home, and found it was not bad.
However, then I went out use the BT headset again, but my friend said, dont use it again, my sound really poor
After that, I bought a BT dongle to try to test my BT headwith in my computer, but the Dongle comes with the bad BT management Driver, called XTNDCoonect Blue Manager.
Do you all have the widcomm software and send it to me ?
I dont know it is against the policy in the forum.

Motorola S9 Bluetooth headset and P3600/S300: A2DP Problem

Hi all,
Well, after hours trying to search in this forum for a solution to the most common problem with our trinity, the A2DP profile to enjoy our music... I'm like in the beggining: I can't hear my music in my headset, only some sounds and calls.
I'm not sure, due the big number of post I read, about the correct patch/hack/app that I must install, so please, I need advice for this settings:
Trinity: AKA S300 from Vodafone Spain,
WM5,
Original ROM 1.23.164.7
Radio:1.33.00.01
Headset: Motorola S9
I Tried before with zoki A2DP, but doesn't works. So please, before installing any other thing, have you got any advice?
Thanks a lot, regards

Same Problem
Hi,
I´ve had problem with Morotola S9. The bluetooth lost audio for a few seconds. Them returns for a few seconds.
Some Ideia ?

Hi all,
Well, good and bad news about my problem
The good one is that after uninstall zoki's hack and install HTweakC 2.0, execute the tweaks of A2DP, I get my music sounds through the s9
the bad is that I can only hear music in stereo and calls in mono (only by the left ear). Videos doesn't go through headset: simply the sound goes to speaker, like if no headset are connected.
Any idea about this? TIA, regards

Possible to send all audio over bluetooth?

I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,

i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do

xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.

My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....

Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,

yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!

I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(

it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation

Works fine with Jabra 3030, all audio over it, music, system sounds and calls.

Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?

I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,

its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)

I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.

Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.

I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?

I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....

the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.

Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.

Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.

Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?